commit b421349d0c13f94ca9dd2d83a1cef7cb03900700
author Tom Rini <trini@konsulko.com> Sat Nov 12 17:36:51 2022 -0500
committer Tom Rini <trini@konsulko.com> Mon Dec 05 16:05:38 2022 -0500
tree a109a38b3f6db435c193d1d0025ff32e90729ea9
parent 1ba2a0070db02d14524842c4c58cdadfcbe2df37

global: Move remaining CONFIG_SYS_NAND_* to CFG_SYS_NAND_*

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NAND
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

board/siemens/corvus/board.c

diff --git a/board/siemens/corvus/board.c b/board/siemens/corvus/board.c
index 90fece7..d876280 100644
--- a/board/siemens/corvus/board.c
+++ b/board/siemens/corvus/board.c
@@ -40,8 +40,8 @@
 
 static void corvus_request_gpio(void)
 {
-	gpio_request(CONFIG_SYS_NAND_ENABLE_PIN, "nand ena");
-	gpio_request(CONFIG_SYS_NAND_READY_PIN, "nand rdy");
+	gpio_request(CFG_SYS_NAND_ENABLE_PIN, "nand ena");
+	gpio_request(CFG_SYS_NAND_READY_PIN, "nand rdy");
 	gpio_request(AT91_PIN_PD7, "d0");
 	gpio_request(AT91_PIN_PD8, "d1");
 	gpio_request(AT91_PIN_PA12, "d2");
@@ -110,8 +110,8 @@
 	at91_periph_clk_enable(ATMEL_ID_PIOA);
 
 	/* Enable NandFlash */
-	at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
-	at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+	at91_set_gpio_output(CFG_SYS_NAND_ENABLE_PIN, 1);
+	at91_set_gpio_input(CFG_SYS_NAND_READY_PIN, 1);
 }
 
 #if defined(CONFIG_SPL_BUILD)

board/siemens/smartweb/smartweb.c

diff --git a/board/siemens/smartweb/smartweb.c b/board/siemens/smartweb/smartweb.c
index d500a62..ce6c877 100644
--- a/board/siemens/smartweb/smartweb.c
+++ b/board/siemens/smartweb/smartweb.c
@@ -42,8 +42,8 @@
 
 static void smartweb_request_gpio(void)
 {
-	gpio_request(CONFIG_SYS_NAND_ENABLE_PIN, "nand ena");
-	gpio_request(CONFIG_SYS_NAND_READY_PIN, "nand rdy");
+	gpio_request(CFG_SYS_NAND_ENABLE_PIN, "nand ena");
+	gpio_request(CFG_SYS_NAND_READY_PIN, "nand rdy");
 	gpio_request(AT91_PIN_PA26, "ena PHY");
 }
 
@@ -72,10 +72,10 @@
 		&smc->cs[3].mode);
 
 	/* Configure RDY/BSY */
-	at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+	at91_set_gpio_input(CFG_SYS_NAND_READY_PIN, 1);
 
 	/* Enable NandFlash */
-	at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	at91_set_gpio_output(CFG_SYS_NAND_ENABLE_PIN, 1);
 }
 
 static void smartweb_macb_hw_init(void)

board/siemens/taurus/taurus.c

diff --git a/board/siemens/taurus/taurus.c b/board/siemens/taurus/taurus.c
index 6c44afb..47d3f6a 100644
--- a/board/siemens/taurus/taurus.c
+++ b/board/siemens/taurus/taurus.c
@@ -41,8 +41,8 @@
 
 static void taurus_request_gpio(void)
 {
-	gpio_request(CONFIG_SYS_NAND_ENABLE_PIN, "nand ena");
-	gpio_request(CONFIG_SYS_NAND_READY_PIN, "nand rdy");
+	gpio_request(CFG_SYS_NAND_ENABLE_PIN, "nand ena");
+	gpio_request(CFG_SYS_NAND_READY_PIN, "nand rdy");
 	gpio_request(AT91_PIN_PA25, "ena PHY");
 }
 
@@ -73,10 +73,10 @@
 	       &smc->cs[3].mode);
 
 	/* Configure RDY/BSY */
-	at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+	at91_set_gpio_input(CFG_SYS_NAND_READY_PIN, 1);
 
 	/* Enable NandFlash */
-	at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	at91_set_gpio_output(CFG_SYS_NAND_ENABLE_PIN, 1);
 }
 
 #if defined(CONFIG_SPL_BUILD)
@@ -149,7 +149,7 @@
 		} else {
 			puts("erase spi flash sector 0\n");
 			spi_flash_erase(flash, 0,
-					CONFIG_SYS_NAND_U_BOOT_SIZE);
+					CFG_SYS_NAND_U_BOOT_SIZE);
 		}
 	}
 }