diff --git a/board/siemens/corvus/board.c b/board/siemens/corvus/board.c
index 90fece7..d876280 100644
--- a/board/siemens/corvus/board.c
+++ b/board/siemens/corvus/board.c
@@ -40,8 +40,8 @@
 
 static void corvus_request_gpio(void)
 {
-	gpio_request(CONFIG_SYS_NAND_ENABLE_PIN, "nand ena");
-	gpio_request(CONFIG_SYS_NAND_READY_PIN, "nand rdy");
+	gpio_request(CFG_SYS_NAND_ENABLE_PIN, "nand ena");
+	gpio_request(CFG_SYS_NAND_READY_PIN, "nand rdy");
 	gpio_request(AT91_PIN_PD7, "d0");
 	gpio_request(AT91_PIN_PD8, "d1");
 	gpio_request(AT91_PIN_PA12, "d2");
@@ -110,8 +110,8 @@
 	at91_periph_clk_enable(ATMEL_ID_PIOA);
 
 	/* Enable NandFlash */
-	at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
-	at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+	at91_set_gpio_output(CFG_SYS_NAND_ENABLE_PIN, 1);
+	at91_set_gpio_input(CFG_SYS_NAND_READY_PIN, 1);
 }
 
 #if defined(CONFIG_SPL_BUILD)
diff --git a/board/siemens/smartweb/smartweb.c b/board/siemens/smartweb/smartweb.c
index d500a62..ce6c877 100644
--- a/board/siemens/smartweb/smartweb.c
+++ b/board/siemens/smartweb/smartweb.c
@@ -42,8 +42,8 @@
 
 static void smartweb_request_gpio(void)
 {
-	gpio_request(CONFIG_SYS_NAND_ENABLE_PIN, "nand ena");
-	gpio_request(CONFIG_SYS_NAND_READY_PIN, "nand rdy");
+	gpio_request(CFG_SYS_NAND_ENABLE_PIN, "nand ena");
+	gpio_request(CFG_SYS_NAND_READY_PIN, "nand rdy");
 	gpio_request(AT91_PIN_PA26, "ena PHY");
 }
 
@@ -72,10 +72,10 @@
 		&smc->cs[3].mode);
 
 	/* Configure RDY/BSY */
-	at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+	at91_set_gpio_input(CFG_SYS_NAND_READY_PIN, 1);
 
 	/* Enable NandFlash */
-	at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	at91_set_gpio_output(CFG_SYS_NAND_ENABLE_PIN, 1);
 }
 
 static void smartweb_macb_hw_init(void)
diff --git a/board/siemens/taurus/taurus.c b/board/siemens/taurus/taurus.c
index 6c44afb..47d3f6a 100644
--- a/board/siemens/taurus/taurus.c
+++ b/board/siemens/taurus/taurus.c
@@ -41,8 +41,8 @@
 
 static void taurus_request_gpio(void)
 {
-	gpio_request(CONFIG_SYS_NAND_ENABLE_PIN, "nand ena");
-	gpio_request(CONFIG_SYS_NAND_READY_PIN, "nand rdy");
+	gpio_request(CFG_SYS_NAND_ENABLE_PIN, "nand ena");
+	gpio_request(CFG_SYS_NAND_READY_PIN, "nand rdy");
 	gpio_request(AT91_PIN_PA25, "ena PHY");
 }
 
@@ -73,10 +73,10 @@
 	       &smc->cs[3].mode);
 
 	/* Configure RDY/BSY */
-	at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+	at91_set_gpio_input(CFG_SYS_NAND_READY_PIN, 1);
 
 	/* Enable NandFlash */
-	at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	at91_set_gpio_output(CFG_SYS_NAND_ENABLE_PIN, 1);
 }
 
 #if defined(CONFIG_SPL_BUILD)
@@ -149,7 +149,7 @@
 		} else {
 			puts("erase spi flash sector 0\n");
 			spi_flash_erase(flash, 0,
-					CONFIG_SYS_NAND_U_BOOT_SIZE);
+					CFG_SYS_NAND_U_BOOT_SIZE);
 		}
 	}
 }