blob: 33acffe4316a7d1ff7b40cc6b84eb121636ae983 [file] [log] [blame]
/*
* (C) Copyright 2003
* Josef Baumgartner <josef.baumgartner@telex.de>
*
* (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <watchdog.h>
#include <command.h>
#include <malloc.h>
#include <stdio_dev.h>
#include <linux/compiler.h>
#include <asm/immap.h>
#if defined(CONFIG_CMD_IDE)
#include <ide.h>
#endif
#if defined(CONFIG_CMD_SCSI)
#include <scsi.h>
#endif
#if defined(CONFIG_CMD_KGDB)
#include <kgdb.h>
#endif
#ifdef CONFIG_STATUS_LED
#include <status_led.h>
#endif
#include <net.h>
#include <serial.h>
#if defined(CONFIG_CMD_BEDBUG)
#include <cmd_bedbug.h>
#endif
#ifdef CONFIG_SYS_ALLOC_DPRAM
#include <commproc.h>
#endif
#include <version.h>
#if defined(CONFIG_HARD_I2C) || \
defined(CONFIG_SOFT_I2C)
#include <i2c.h>
#endif
#ifdef CONFIG_CMD_SPI
#include <spi.h>
#endif
#ifdef CONFIG_BITBANGMII
#include <miiphy.h>
#endif
#include <nand.h>
DECLARE_GLOBAL_DATA_PTR;
static char *failed = "*** failed ***\n";
#include <environment.h>
extern ulong __init_end;
extern ulong __bss_end__;
#if defined(CONFIG_WATCHDOG)
# define INIT_FUNC_WATCHDOG_INIT watchdog_init,
# define WATCHDOG_DISABLE watchdog_disable
extern int watchdog_init(void);
extern int watchdog_disable(void);
#else
# define INIT_FUNC_WATCHDOG_INIT /* undef */
# define WATCHDOG_DISABLE /* undef */
#endif /* CONFIG_WATCHDOG */
ulong monitor_flash_len;
/************************************************************************
* Utilities *
************************************************************************
*/
/*
* All attempts to come up with a "common" initialization sequence
* that works for all boards and architectures failed: some of the
* requirements are just _too_ different. To get rid of the resulting
* mess of board dependend #ifdef'ed code we now make the whole
* initialization sequence configurable to the user.
*
* The requirements for any new initalization function is simple: it
* receives a pointer to the "global data" structure as it's only
* argument, and returns an integer return code, where 0 means
* "continue" and != 0 means "fatal error, hang the system".
*/
typedef int (init_fnc_t) (void);
/************************************************************************
* Init Utilities
************************************************************************
* Some of this code should be moved into the core functions,
* but let's get it working (again) first...
*/
static int init_baudrate (void)
{
gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE);
return 0;
}
/***********************************************************************/
static int init_func_ram (void)
{
int board_type = 0; /* use dummy arg */
puts ("DRAM: ");
if ((gd->ram_size = initdram (board_type)) > 0) {
print_size (gd->ram_size, "\n");
return (0);
}
puts (failed);
return (1);
}
/***********************************************************************/
#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
static int init_func_i2c (void)
{
puts ("I2C: ");
i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
puts ("ready\n");
return (0);
}
#endif
#if defined(CONFIG_HARD_SPI)
static int init_func_spi (void)
{
puts ("SPI: ");
spi_init ();
puts ("ready\n");
return (0);
}
#endif
/***********************************************************************/
/************************************************************************
* Initialization sequence *
************************************************************************
*/
init_fnc_t *init_sequence[] = {
get_clocks,
env_init,
init_baudrate,
serial_init,
console_init_f,
display_options,
checkcpu,
checkboard,
#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
init_func_i2c,
#endif
#if defined(CONFIG_HARD_SPI)
init_func_spi,
#endif
init_func_ram,
#if defined(CONFIG_SYS_DRAM_TEST)
testdram,
#endif /* CONFIG_SYS_DRAM_TEST */
INIT_FUNC_WATCHDOG_INIT
NULL, /* Terminate this list */
};
/************************************************************************
*
* This is the first part of the initialization sequence that is
* implemented in C, but still running from ROM.
*
* The main purpose is to provide a (serial) console interface as
* soon as possible (so we can see any error messages), and to
* initialize the RAM so that we can relocate the monitor code to
* RAM.
*
* Be aware of the restrictions: global data is read-only, BSS is not
* initialized, and stack space is limited to a few kB.
*
************************************************************************
*/
void
board_init_f (ulong bootflag)
{
bd_t *bd;
ulong len, addr, addr_sp;
ulong *paddr;
gd_t *id;
init_fnc_t **init_fnc_ptr;
#ifdef CONFIG_PRAM
ulong reg;
#endif
/* Pointer is writable since we allocated a register for it */
gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
/* compiler optimization barrier needed for GCC >= 3.4 */
__asm__ __volatile__("": : :"memory");
/* Clear initial global data */
memset ((void *) gd, 0, sizeof (gd_t));
for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
if ((*init_fnc_ptr)() != 0) {
hang ();
}
}
/*
* Now that we have DRAM mapped and working, we can
* relocate the code and continue running from DRAM.
*
* Reserve memory at end of RAM for (top down in that order):
* - protected RAM
* - LCD framebuffer
* - monitor code
* - board info struct
*/
len = (ulong)&__bss_end__ - CONFIG_SYS_MONITOR_BASE;
addr = CONFIG_SYS_SDRAM_BASE + gd->ram_size;
#ifdef CONFIG_LOGBUFFER
/* reserve kernel log buffer */
addr -= (LOGBUFF_RESERVE);
debug ("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN, addr);
#endif
#ifdef CONFIG_PRAM
/*
* reserve protected RAM
*/
reg = getenv_ulong("pram", 10, CONFIG_PRAM);
addr -= (reg << 10); /* size is in kB */
debug ("Reserving %ldk for protected RAM at %08lx\n", reg, addr);
#endif /* CONFIG_PRAM */
/* round down to next 4 kB limit */
addr &= ~(4096 - 1);
debug ("Top of RAM usable for U-Boot at: %08lx\n", addr);
#ifdef CONFIG_LCD
#ifdef CONFIG_FB_ADDR
gd->fb_base = CONFIG_FB_ADDR;
#else
/* reserve memory for LCD display (always full pages) */
addr = lcd_setmem (addr);
gd->fb_base = addr;
#endif /* CONFIG_FB_ADDR */
#endif /* CONFIG_LCD */
/*
* reserve memory for U-Boot code, data & bss
* round down to next 4 kB limit
*/
addr -= len;
addr &= ~(4096 - 1);
debug ("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr);
/*
* reserve memory for malloc() arena
*/
addr_sp = addr - TOTAL_MALLOC_LEN;
debug ("Reserving %dk for malloc() at: %08lx\n",
TOTAL_MALLOC_LEN >> 10, addr_sp);
/*
* (permanently) allocate a Board Info struct
* and a permanent copy of the "global" data
*/
addr_sp -= sizeof (bd_t);
bd = (bd_t *) addr_sp;
gd->bd = bd;
debug ("Reserving %zu Bytes for Board Info at: %08lx\n",
sizeof (bd_t), addr_sp);
addr_sp -= sizeof (gd_t);
id = (gd_t *) addr_sp;
debug ("Reserving %zu Bytes for Global Data at: %08lx\n",
sizeof (gd_t), addr_sp);
/* Reserve memory for boot params. */
addr_sp -= CONFIG_SYS_BOOTPARAMS_LEN;
bd->bi_boot_params = addr_sp;
debug ("Reserving %dk for boot parameters at: %08lx\n",
CONFIG_SYS_BOOTPARAMS_LEN >> 10, addr_sp);
/*
* Finally, we set up a new (bigger) stack.
*
* Leave some safety gap for SP, force alignment on 16 byte boundary
* Clear initial stack frame
*/
addr_sp -= 16;
addr_sp &= ~0xF;
paddr = (ulong *)addr_sp;
*paddr-- = 0;
*paddr-- = 0;
addr_sp = (ulong)paddr;
debug ("Stack Pointer at: %08lx\n", addr_sp);
/*
* Save local variables to board info struct
*/
bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; /* start of DRAM memory */
bd->bi_memsize = gd->ram_size; /* size of DRAM memory in bytes */
#ifdef CONFIG_SYS_INIT_RAM_ADDR
bd->bi_sramstart = CONFIG_SYS_INIT_RAM_ADDR; /* start of SRAM memory */
bd->bi_sramsize = CONFIG_SYS_INIT_RAM_SIZE; /* size of SRAM memory */
#endif
bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */
bd->bi_bootflags = bootflag; /* boot / reboot flag (for LynxOS) */
WATCHDOG_RESET ();
bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */
bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */
#ifdef CONFIG_PCI
bd->bi_pcifreq = gd->pci_clk; /* PCI Freq in Hz */
#endif
#ifdef CONFIG_EXTRA_CLOCK
bd->bi_inpfreq = gd->arch.inp_clk; /* input Freq in Hz */
bd->bi_vcofreq = gd->arch.vco_clk; /* vco Freq in Hz */
bd->bi_flbfreq = gd->arch.flb_clk; /* flexbus Freq in Hz */
#endif
bd->bi_baudrate = gd->baudrate; /* Console Baudrate */
#ifdef CONFIG_SYS_EXTBDINFO
strncpy (bd->bi_s_version, "1.2", sizeof (bd->bi_s_version));
strncpy (bd->bi_r_version, U_BOOT_VERSION, sizeof (bd->bi_r_version));
#endif
WATCHDOG_RESET ();
#ifdef CONFIG_POST
post_bootmode_init();
post_run (NULL, POST_ROM | post_bootmode_get(0));
#endif
WATCHDOG_RESET();
memcpy (id, (void *)gd, sizeof (gd_t));
debug ("Start relocate of code from %08x to %08lx\n", CONFIG_SYS_MONITOR_BASE, addr);
relocate_code (addr_sp, id, addr);
/* NOTREACHED - jump_to_ram() does not return */
}
/************************************************************************
*
* This is the next part if the initialization sequence: we are now
* running from RAM and have a "normal" C environment, i. e. global
* data can be written, BSS has been cleared, the stack size in not
* that critical any more, etc.
*
************************************************************************
*/
void board_init_r (gd_t *id, ulong dest_addr)
{
char *s __maybe_unused;
bd_t *bd;
#ifndef CONFIG_ENV_IS_NOWHERE
extern char * env_name_spec;
#endif
#ifndef CONFIG_SYS_NO_FLASH
ulong flash_size;
#endif
gd = id; /* initialize RAM version of global data */
bd = gd->bd;
gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
WATCHDOG_RESET ();
gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE;
serial_initialize();
monitor_flash_len = (ulong)&__init_end - dest_addr;
#if defined(CONFIG_NEEDS_MANUAL_RELOC)
/*
* We have to relocate the command table manually
*/
fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd),
ll_entry_count(cmd_tbl_t, cmd));
#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
/* there are some other pointer constants we must deal with */
#ifndef CONFIG_ENV_IS_NOWHERE
env_name_spec += gd->reloc_off;
#endif
WATCHDOG_RESET ();
#ifdef CONFIG_LOGBUFFER
logbuff_init_ptrs ();
#endif
#ifdef CONFIG_POST
post_output_backlog ();
post_reloc ();
#endif
WATCHDOG_RESET();
#if 0
/* instruction cache enabled in cpu_init_f() for faster relocation */
icache_enable (); /* it's time to enable the instruction cache */
#endif
/*
* Setup trap handlers
*/
trap_init (CONFIG_SYS_SDRAM_BASE);
/* The Malloc area is immediately below the monitor copy in DRAM */
mem_malloc_init (CONFIG_SYS_MONITOR_BASE + gd->reloc_off -
TOTAL_MALLOC_LEN, TOTAL_MALLOC_LEN);
#if !defined(CONFIG_SYS_NO_FLASH)
puts ("Flash: ");
if ((flash_size = flash_init ()) > 0) {
# ifdef CONFIG_SYS_FLASH_CHECKSUM
print_size (flash_size, "");
/*
* Compute and print flash CRC if flashchecksum is set to 'y'
*
* NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
*/
if (getenv_yesno("flashchecksum") == 1) {
printf (" CRC: %08X",
crc32 (0,
(const unsigned char *) CONFIG_SYS_FLASH_BASE,
flash_size)
);
}
putc ('\n');
# else /* !CONFIG_SYS_FLASH_CHECKSUM */
print_size (flash_size, "\n");
# endif /* CONFIG_SYS_FLASH_CHECKSUM */
} else {
puts (failed);
hang ();
}
bd->bi_flashstart = CONFIG_SYS_FLASH_BASE; /* update start of FLASH memory */
bd->bi_flashsize = flash_size; /* size of FLASH memory (final value) */
bd->bi_flashoffset = 0;
#else /* CONFIG_SYS_NO_FLASH */
bd->bi_flashsize = 0;
bd->bi_flashstart = 0;
bd->bi_flashoffset = 0;
#endif /* !CONFIG_SYS_NO_FLASH */
WATCHDOG_RESET ();
/* initialize higher level parts of CPU like time base and timers */
cpu_init_r ();
WATCHDOG_RESET ();
#ifdef CONFIG_SPI
# if !defined(CONFIG_ENV_IS_IN_EEPROM)
spi_init_f ();
# endif
spi_init_r ();
#endif
/* relocate environment function pointers etc. */
env_relocate ();
WATCHDOG_RESET ();
#if defined(CONFIG_PCI)
/*
* Do pci configuration
*/
pci_init ();
#endif
/** leave this here (after malloc(), environment and PCI are working) **/
/* Initialize stdio devices */
stdio_init ();
/* Initialize the jump table for applications */
jumptable_init ();
/* Initialize the console (after the relocation and devices init) */
console_init_r ();
#if defined(CONFIG_MISC_INIT_R)
/* miscellaneous platform dependent initialisations */
misc_init_r ();
#endif
#if defined(CONFIG_CMD_KGDB)
WATCHDOG_RESET ();
puts ("KGDB: ");
kgdb_init ();
#endif
debug ("U-Boot relocated to %08lx\n", dest_addr);
/*
* Enable Interrupts
*/
interrupt_init ();
/* Must happen after interrupts are initialized since
* an irq handler gets installed
*/
timer_init();
#ifdef CONFIG_STATUS_LED
status_led_set (STATUS_LED_BOOT, STATUS_LED_BLINKING);
#endif
udelay (20);
/* Insert function pointers now that we have relocated the code */
/* Initialize from environment */
load_addr = getenv_ulong("loadaddr", 16, load_addr);
WATCHDOG_RESET ();
#if defined(CONFIG_CMD_DOC)
WATCHDOG_RESET ();
puts ("DOC: ");
doc_init ();
#endif
#if defined(CONFIG_CMD_NAND)
WATCHDOG_RESET ();
puts ("NAND: ");
nand_init(); /* go init the NAND */
#endif
#ifdef CONFIG_BITBANGMII
bb_miiphy_init();
#endif
#if defined(CONFIG_CMD_NET)
WATCHDOG_RESET();
#if defined(FEC_ENET)
eth_init(bd);
#endif
puts ("Net: ");
eth_initialize (bd);
#endif
#ifdef CONFIG_POST
post_run (NULL, POST_RAM | post_bootmode_get(0));
#endif
#if defined(CONFIG_CMD_PCMCIA) \
&& !defined(CONFIG_CMD_IDE)
WATCHDOG_RESET ();
puts ("PCMCIA:");
pcmcia_init ();
#endif
#if defined(CONFIG_CMD_IDE)
WATCHDOG_RESET ();
puts ("IDE: ");
ide_init ();
#endif
#ifdef CONFIG_LAST_STAGE_INIT
WATCHDOG_RESET ();
/*
* Some parts can be only initialized if all others (like
* Interrupts) are up and running (i.e. the PC-style ISA
* keyboard).
*/
last_stage_init ();
#endif
#if defined(CONFIG_CMD_BEDBUG)
WATCHDOG_RESET ();
bedbug_init ();
#endif
#if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER)
/*
* Export available size of memory for Linux,
* taking into account the protected RAM at top of memory
*/
{
ulong pram = 0;
char memsz[32];
#ifdef CONFIG_PRAM
pram = getenv_ulong("pram", 10, CONFIG_PRAM);
#endif
#ifdef CONFIG_LOGBUFFER
/* Also take the logbuffer into account (pram is in kB) */
pram += (LOGBUFF_LEN+LOGBUFF_OVERHEAD)/1024;
#endif
sprintf (memsz, "%ldk", (bd->bi_memsize / 1024) - pram);
setenv ("mem", memsz);
}
#endif
#ifdef CONFIG_MODEM_SUPPORT
{
extern int do_mdm_init;
do_mdm_init = gd->do_mdm_init;
}
#endif
#ifdef CONFIG_WATCHDOG
/* disable watchdog if environment is set */
if ((s = getenv ("watchdog")) != NULL) {
if (strncmp (s, "off", 3) == 0) {
WATCHDOG_DISABLE ();
}
}
#endif /* CONFIG_WATCHDOG*/
/* Initialization complete - start the monitor */
/* main_loop() can return to retry autoboot, if so just run it again. */
for (;;) {
WATCHDOG_RESET ();
main_loop ();
}
/* NOTREACHED - no way out of command loop except booting */
}
void hang(void)
{
puts ("### ERROR ### Please RESET the board ###\n");
for (;;);
}