| # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/mfd/stericsson,ab8500.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: ST-Ericsson Analog Baseband AB8500 and AB8505 |
| |
| maintainers: |
| - Linus Walleij <linus.walleij@linaro.org> |
| |
| description: |
| the AB8500 "Analog Baseband" is the mixed-signals integrated circuit |
| handling power management (regulators), analog-to-digital conversion |
| (ADC), battery charging, fuel gauging of the battery, battery-backed |
| RTC, PWM, USB PHY and some GPIO lines in the ST-Ericsson U8500 platforms |
| in connection with the DB8500 digital baseband. The DB8500 PRCMU |
| communicates directly and autonomously with the AB8500 and thus it |
| appears as a subnode of the DB8500 PRCMU. An altered version called |
| AB8505 also exist, the difference in AB8505 is that some of the USB and |
| USB charging handling has changed, and it has an embedded USB-to-serial |
| converter. Most subblocks takes their interrupts directly from the |
| AB8500 embedded interrupt controller. |
| |
| properties: |
| $nodename: |
| pattern: '^ab850[05]$' |
| |
| compatible: |
| enum: |
| - stericsson,ab8500 |
| - stericsson,ab8505 |
| |
| interrupts: |
| maxItems: 1 |
| |
| interrupt-controller: true |
| |
| '#interrupt-cells': |
| const: 2 |
| |
| # Some subnodes use a reg, some don't. Those that do use a single cell. |
| '#address-cells': |
| const: 1 |
| |
| '#size-cells': |
| const: 0 |
| |
| clock-controller: |
| description: Node describing the AB8500 clock controller. This |
| provides the reference clock for the entire U8500 system and |
| the DB8500 counterpart. |
| type: object |
| additionalProperties: false |
| |
| properties: |
| compatible: |
| const: stericsson,ab8500-clk |
| |
| '#clock-cells': |
| const: 1 |
| |
| gpio: |
| description: Node describing the AB8500 GPIO controller. A few |
| GPIO pins available for misc usage. |
| type: object |
| additionalProperties: false |
| |
| properties: |
| compatible: |
| enum: |
| - stericsson,ab8500-gpio |
| - stericsson,ab8505-gpio |
| |
| gpio-controller: true |
| |
| '#gpio-cells': |
| const: 2 |
| |
| rtc: |
| description: Node describing the AB8500 battery-backed RTC. |
| type: object |
| additionalProperties: false |
| |
| properties: |
| compatible: |
| const: stericsson,ab8500-rtc |
| |
| interrupts: |
| items: |
| - description: 60 second interval alarm interrupt |
| - description: RTC alarm |
| |
| interrupt-names: |
| items: |
| - const: 60S |
| - const: ALARM |
| |
| adc: |
| description: Node describing the AB8500 general purpose analog to digital |
| converter, GPADC. |
| type: object |
| |
| properties: |
| compatible: |
| const: stericsson,ab8500-gpadc |
| |
| # AB8505 only supports one (software) EOC interrupt |
| interrupts: |
| minItems: 1 |
| maxItems: 2 |
| |
| interrupt-names: true |
| |
| vddadc-supply: true |
| |
| '#address-cells': |
| const: 1 |
| |
| '#size-cells': |
| const: 0 |
| |
| '#io-channel-cells': |
| const: 1 |
| |
| patternProperties: |
| "^channel@[0-9a-f]+$": |
| type: object |
| $ref: ../iio/adc/adc.yaml# |
| description: Represents each of the external channels which are |
| connected to the ADC. |
| |
| properties: |
| reg: |
| items: |
| minimum: 1 |
| maximum: 31 |
| |
| required: |
| - reg |
| |
| additionalProperties: false |
| |
| required: |
| - compatible |
| - interrupts |
| - interrupt-names |
| - vddadc-supply |
| - '#address-cells' |
| - '#size-cells' |
| - '#io-channel-cells' |
| |
| additionalProperties: false |
| |
| thermal: |
| description: Node describing the AB8500 thermal control block. All this block |
| really does is to fire an interrupt when the die becomes 130 degrees Celsius |
| in temperature. |
| type: object |
| |
| properties: |
| compatible: |
| const: stericsson,abx500-temp |
| |
| interrupts: |
| items: |
| - description: Thermal warm warning interrupt |
| |
| interrupt-names: |
| items: |
| - const: ABX500_TEMP_WARM |
| |
| required: |
| - compatible |
| - interrupts |
| - interrupt-names |
| |
| additionalProperties: false |
| |
| ab8500_fg: |
| description: Node describing the AB8500 fuel gauge control block. |
| type: object |
| $ref: ../power/supply/stericsson,ab8500-fg.yaml |
| |
| ab8500_btemp: |
| description: Node describing the AB8500 battery temperature control block. |
| type: object |
| $ref: ../power/supply/stericsson,ab8500-btemp.yaml |
| |
| ab8500_charger: |
| description: Node describing the AB8500 battery charger control block. |
| type: object |
| $ref: ../power/supply/stericsson,ab8500-charger.yaml |
| |
| ab8500_chargalg: |
| description: Node describing the AB8500 battery charger algorithm. |
| type: object |
| $ref: ../power/supply/stericsson,ab8500-chargalg.yaml |
| |
| phy: |
| description: Node describing the AB8500 USB PHY control block. |
| type: object |
| |
| properties: |
| compatible: |
| const: stericsson,ab8500-usb |
| |
| interrupts: |
| items: |
| - description: ID wakeup rising IRQ |
| - description: ID wakeup falling IRQ |
| - description: VBUS detection falling IRQ |
| - description: VBUS detection rising IRQ |
| - description: USB link status change IRQ |
| - description: ADP probe plug IRQ |
| - description: ADP probe unplug IRQ |
| |
| interrupt-names: |
| items: |
| - const: ID_WAKEUP_R |
| - const: ID_WAKEUP_F |
| - const: VBUS_DET_F |
| - const: VBUS_DET_R |
| - const: USB_LINK_STATUS |
| - const: USB_ADP_PROBE_PLUG |
| - const: USB_ADP_PROBE_UNPLUG |
| |
| vddulpivio18-supply: true |
| v-ape-supply: true |
| musb_1v8-supply: true |
| |
| clocks: |
| items: |
| - description: PRCMY system clock |
| |
| clock-names: |
| items: |
| - const: sysclk |
| |
| '#phy-cells': |
| const: 0 |
| |
| required: |
| - compatible |
| - interrupts |
| - interrupt-names |
| - vddulpivio18-supply |
| - v-ape-supply |
| - musb_1v8-supply |
| - clocks |
| - clock-names |
| - '#phy-cells' |
| |
| additionalProperties: false |
| |
| key: |
| description: Node describing the AB8500 power-on key control block. |
| type: object |
| |
| properties: |
| compatible: |
| const: stericsson,ab8500-poweron-key |
| |
| interrupts: |
| items: |
| - description: ON key falling IRQ |
| - description: ON key rising IRQ |
| |
| interrupt-names: |
| items: |
| - const: ONKEY_DBF |
| - const: ONKEY_DBR |
| |
| required: |
| - compatible |
| - interrupts |
| - interrupt-names |
| |
| additionalProperties: false |
| |
| ab8500-sysctrl: |
| description: Node describing the AB8500 system control block. |
| type: object |
| |
| properties: |
| compatible: |
| const: stericsson,ab8500-sysctrl |
| |
| required: |
| - compatible |
| |
| additionalProperties: false |
| |
| codec: |
| description: Node describing the AB8500 audio codec block. |
| type: object |
| |
| properties: |
| compatible: |
| const: stericsson,ab8500-codec |
| |
| V-AUD-supply: true |
| V-AMIC1-supply: true |
| V-AMIC2-supply: true |
| V-DMIC-supply: true |
| |
| clocks: |
| items: |
| - description: Audio system clock |
| |
| clock-names: |
| items: |
| - const: audioclk |
| |
| stericsson,earpeice-cmv: |
| description: Earpiece voltage |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| enum: [ 950, 1100, 1270, 1580 ] |
| |
| required: |
| - compatible |
| |
| additionalProperties: false |
| |
| regulator: |
| description: Node describing the AB8500 internal regulators. |
| type: object |
| |
| properties: |
| compatible: |
| enum: |
| - stericsson,ab8500-regulator |
| - stericsson,ab8505-regulator |
| |
| vin-supply: |
| description: The regulator supplying all of the internal regulators |
| with power. |
| |
| ab8500_ldo_aux1: |
| description: The voltage for the auxiliary LDO regulator 1 |
| type: object |
| $ref: ../regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| ab8500_ldo_aux2: |
| description: The voltage for the auxiliary LDO regulator 2 |
| type: object |
| $ref: ../regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| ab8500_ldo_aux3: |
| description: The voltage for the auxiliary LDO regulator 3 |
| type: object |
| $ref: ../regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| ab8500_ldo_aux4: |
| description: The voltage for the auxiliary LDO regulator 4 |
| only present on AB8505 |
| type: object |
| $ref: ../regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| ab8500_ldo_aux5: |
| description: The voltage for the auxiliary LDO regulator 5 |
| only present on AB8505 |
| type: object |
| $ref: ../regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| ab8500_ldo_aux6: |
| description: The voltage for the auxiliary LDO regulator 6 |
| only present on AB8505 |
| type: object |
| $ref: ../regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| # There is never any AUX7 regulator which is confusing |
| |
| ab8500_ldo_aux8: |
| description: The voltage for the auxiliary LDO regulator 8 |
| only present on AB8505 |
| type: object |
| $ref: ../regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| ab8500_ldo_intcore: |
| description: The LDO regulator for the internal core voltage |
| of the AB8500 |
| type: object |
| $ref: ../regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| ab8500_ldo_adc: |
| description: Analog power regulator for the analog to digital converter |
| ADC, only present on AB8505 |
| type: object |
| $ref: ../regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| ab8500_ldo_tvout: |
| description: The voltage for the TV output regulator, incidentally |
| this voltage is also used for other purposes such as measuring |
| the temperature of the NTC thermistor on the battery. |
| Only present on AB8500. |
| type: object |
| $ref: ../regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| ab8500_ldo_audio: |
| description: The LDO regulator for the audio codec output |
| type: object |
| $ref: ../regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| ab8500_ldo_anamic1: |
| description: The LDO regulator for the analog microphone 1 |
| type: object |
| $ref: ../regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| ab8500_ldo_anamic2: |
| description: The LDO regulator for the analog microphone 2 |
| type: object |
| $ref: ../regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| ab8500_ldo_dmic: |
| description: The LDO regulator for the digital microphone |
| only present on AB8500 |
| type: object |
| $ref: ../regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| ab8500_ldo_ana: |
| description: Analog power regulator for CSI and DSI interfaces, |
| Camera Serial Interface CSI and Display Serial Interface DSI. |
| type: object |
| $ref: ../regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| required: |
| - compatible |
| |
| additionalProperties: false |
| |
| |
| regulator-external: |
| description: Node describing the AB8500 external regulators. This |
| concerns the autonomous regulators VSMPS1, VSMPS2 and VSMPS3 |
| that are normally controlled by external electronics but also |
| sometimes need to be explicitly controlled by software. |
| type: object |
| |
| properties: |
| compatible: |
| const: stericsson,ab8500-ext-regulator |
| |
| ab8500_ext1: |
| description: The voltage for the VSMPS1 external regulator |
| type: object |
| $ref: ../regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| ab8500_ext2: |
| description: The voltage for the VSMPS2 external regulator |
| type: object |
| $ref: ../regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| ab8500_ext3: |
| description: The voltage for the VSMPS3 external regulator |
| type: object |
| $ref: ../regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| required: |
| - compatible |
| |
| additionalProperties: false |
| |
| patternProperties: |
| "^pwm@[1-9]+?$": |
| type: object |
| $ref: ../pwm/pwm.yaml# |
| unevaluatedProperties: false |
| description: Represents each of the PWM blocks in the AB8500 |
| |
| properties: |
| compatible: |
| const: stericsson,ab8500-pwm |
| |
| reg: true |
| |
| clocks: |
| items: |
| - description: internal clock |
| |
| clock-names: |
| items: |
| - const: intclk |
| |
| required: |
| - compatible |
| - reg |
| |
| required: |
| - compatible |
| - clock-controller |
| - gpio |
| - rtc |
| - adc |
| - thermal |
| - ab8500_fg |
| - ab8500_btemp |
| - ab8500_charger |
| - ab8500_chargalg |
| - phy |
| - key |
| - regulator |
| |
| additionalProperties: false |