| /* |
| * Driver for SST serial flashes |
| * |
| * (C) Copyright 2000-2002 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * Copyright 2008, Network Appliance Inc. |
| * Jason McMullan <mcmullan@netapp.com> |
| * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. |
| * TsiChung Liew (Tsi-Chung.Liew@freescale.com) |
| * Copyright (c) 2008-2009 Analog Devices Inc. |
| * |
| * Licensed under the GPL-2 or later. |
| */ |
| |
| #include <common.h> |
| #include <malloc.h> |
| #include <spi_flash.h> |
| |
| #include "spi_flash_internal.h" |
| |
| #define CMD_SST_BP 0x02 /* Byte Program */ |
| #define CMD_SST_AAI_WP 0xAD /* Auto Address Incr Word Program */ |
| |
| #define SST_SR_WIP (1 << 0) /* Write-in-Progress */ |
| #define SST_SR_WEL (1 << 1) /* Write enable */ |
| #define SST_SR_BP0 (1 << 2) /* Block Protection 0 */ |
| #define SST_SR_BP1 (1 << 3) /* Block Protection 1 */ |
| #define SST_SR_BP2 (1 << 4) /* Block Protection 2 */ |
| #define SST_SR_AAI (1 << 6) /* Addressing mode */ |
| #define SST_SR_BPL (1 << 7) /* BP bits lock */ |
| |
| #define SST_FEAT_WP (1 << 0) /* Supports AAI word program */ |
| #define SST_FEAT_MBP (1 << 1) /* Supports multibyte program */ |
| |
| struct sst_spi_flash_params { |
| u8 idcode1; |
| u8 flags; |
| u16 nr_sectors; |
| const char *name; |
| }; |
| |
| struct sst_spi_flash { |
| struct spi_flash flash; |
| const struct sst_spi_flash_params *params; |
| }; |
| |
| static const struct sst_spi_flash_params sst_spi_flash_table[] = { |
| { |
| .idcode1 = 0x8d, |
| .flags = SST_FEAT_WP, |
| .nr_sectors = 128, |
| .name = "SST25VF040B", |
| }, |
| { |
| .idcode1 = 0x8e, |
| .flags = SST_FEAT_WP, |
| .nr_sectors = 256, |
| .name = "SST25VF080B", |
| }, |
| { |
| .idcode1 = 0x41, |
| .flags = SST_FEAT_WP, |
| .nr_sectors = 512, |
| .name = "SST25VF016B", |
| }, |
| { |
| .idcode1 = 0x4a, |
| .flags = SST_FEAT_WP, |
| .nr_sectors = 1024, |
| .name = "SST25VF032B", |
| }, |
| { |
| .idcode1 = 0x4b, |
| .flags = SST_FEAT_MBP, |
| .nr_sectors = 2048, |
| .name = "SST25VF064C", |
| }, |
| { |
| .idcode1 = 0x01, |
| .flags = SST_FEAT_WP, |
| .nr_sectors = 16, |
| .name = "SST25WF512", |
| }, |
| { |
| .idcode1 = 0x02, |
| .flags = SST_FEAT_WP, |
| .nr_sectors = 32, |
| .name = "SST25WF010", |
| }, |
| { |
| .idcode1 = 0x03, |
| .flags = SST_FEAT_WP, |
| .nr_sectors = 64, |
| .name = "SST25WF020", |
| }, |
| { |
| .idcode1 = 0x04, |
| .flags = SST_FEAT_WP, |
| .nr_sectors = 128, |
| .name = "SST25WF040", |
| }, |
| }; |
| |
| static int |
| sst_byte_write(struct spi_flash *flash, u32 offset, const void *buf) |
| { |
| int ret; |
| u8 cmd[4] = { |
| CMD_SST_BP, |
| offset >> 16, |
| offset >> 8, |
| offset, |
| }; |
| |
| debug("BP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n", |
| spi_w8r8(flash->spi, CMD_READ_STATUS), buf, cmd[0], offset); |
| |
| ret = spi_flash_cmd_write_enable(flash); |
| if (ret) |
| return ret; |
| |
| ret = spi_flash_cmd_write(flash->spi, cmd, sizeof(cmd), buf, 1); |
| if (ret) |
| return ret; |
| |
| return spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); |
| } |
| |
| static int |
| sst_write_wp(struct spi_flash *flash, u32 offset, size_t len, const void *buf) |
| { |
| size_t actual, cmd_len; |
| int ret; |
| u8 cmd[4]; |
| |
| ret = spi_claim_bus(flash->spi); |
| if (ret) { |
| debug("SF: Unable to claim SPI bus\n"); |
| return ret; |
| } |
| |
| /* If the data is not word aligned, write out leading single byte */ |
| actual = offset % 2; |
| if (actual) { |
| ret = sst_byte_write(flash, offset, buf); |
| if (ret) |
| goto done; |
| } |
| offset += actual; |
| |
| ret = spi_flash_cmd_write_enable(flash); |
| if (ret) |
| goto done; |
| |
| cmd_len = 4; |
| cmd[0] = CMD_SST_AAI_WP; |
| cmd[1] = offset >> 16; |
| cmd[2] = offset >> 8; |
| cmd[3] = offset; |
| |
| for (; actual < len - 1; actual += 2) { |
| debug("WP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n", |
| spi_w8r8(flash->spi, CMD_READ_STATUS), buf + actual, |
| cmd[0], offset); |
| |
| ret = spi_flash_cmd_write(flash->spi, cmd, cmd_len, |
| buf + actual, 2); |
| if (ret) { |
| debug("SF: sst word program failed\n"); |
| break; |
| } |
| |
| ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); |
| if (ret) |
| break; |
| |
| cmd_len = 1; |
| offset += 2; |
| } |
| |
| if (!ret) |
| ret = spi_flash_cmd_write_disable(flash); |
| |
| /* If there is a single trailing byte, write it out */ |
| if (!ret && actual != len) |
| ret = sst_byte_write(flash, offset, buf + actual); |
| |
| done: |
| debug("SF: sst: program %s %zu bytes @ 0x%zx\n", |
| ret ? "failure" : "success", len, offset - actual); |
| |
| spi_release_bus(flash->spi); |
| return ret; |
| } |
| |
| struct spi_flash * |
| spi_flash_probe_sst(struct spi_slave *spi, u8 *idcode) |
| { |
| const struct sst_spi_flash_params *params; |
| struct sst_spi_flash *stm; |
| size_t i; |
| |
| for (i = 0; i < ARRAY_SIZE(sst_spi_flash_table); ++i) { |
| params = &sst_spi_flash_table[i]; |
| if (params->idcode1 == idcode[2]) |
| break; |
| } |
| |
| if (i == ARRAY_SIZE(sst_spi_flash_table)) { |
| debug("SF: Unsupported SST ID %02x\n", idcode[1]); |
| return NULL; |
| } |
| |
| stm = spi_flash_alloc(struct sst_spi_flash, spi, params->name); |
| if (!stm) { |
| debug("SF: Failed to allocate memory\n"); |
| return NULL; |
| } |
| |
| stm->params = params; |
| |
| if (stm->params->flags & SST_FEAT_WP) |
| stm->flash.write = sst_write_wp; |
| stm->flash.page_size = 256; |
| stm->flash.sector_size = 4096; |
| stm->flash.size = stm->flash.sector_size * params->nr_sectors; |
| |
| /* Flash powers up read-only, so clear BP# bits */ |
| spi_flash_cmd_write_status(&stm->flash, 0); |
| |
| return &stm->flash; |
| } |