misc: stm32: Add STM32MP1 support
Following next kernel rcc bindings, we must use a MFD
RCC driver which is able to bind both clock and reset
drivers.
We can reuse and adapt RCC MFD driver already available
for MCU SoCs (F4/F7/H7).
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
diff --git a/drivers/clk/clk_stm32mp1.c b/drivers/clk/clk_stm32mp1.c
index 1a77eba..af7d05f 100644
--- a/drivers/clk/clk_stm32mp1.c
+++ b/drivers/clk/clk_stm32mp1.c
@@ -1764,15 +1764,9 @@
.get_rate = stm32mp1_clk_get_rate,
};
-static const struct udevice_id stm32mp1_clk_ids[] = {
- { .compatible = "st,stm32mp1-rcc-clk" },
- { }
-};
-
U_BOOT_DRIVER(stm32mp1_clock) = {
.name = "stm32mp1_clk",
.id = UCLASS_CLK,
- .of_match = stm32mp1_clk_ids,
.ops = &stm32mp1_clk_ops,
.priv_auto_alloc_size = sizeof(struct stm32mp1_clk_priv),
.probe = stm32mp1_clk_probe,
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 17b3a80..c031dfd 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -169,7 +169,7 @@
config STM32_RCC
bool "Enable RCC driver for the STM32 SoC's family"
- depends on STM32 && MISC
+ depends on (STM32 || ARCH_STM32MP) && MISC
help
Enable the STM32 RCC driver. The RCC block (Reset and Clock Control
block) is responsible of the management of the clock and reset
diff --git a/drivers/misc/stm32_rcc.c b/drivers/misc/stm32_rcc.c
index 980b3a5..13d7069 100644
--- a/drivers/misc/stm32_rcc.c
+++ b/drivers/misc/stm32_rcc.c
@@ -30,6 +30,11 @@
.drv_name = "stm32h7_rcc_clock",
};
+struct stm32_rcc_clk stm32_rcc_clk_mp1 = {
+ .drv_name = "stm32mp1_clk",
+ .soc = STM32MP1,
+};
+
static int stm32_rcc_bind(struct udevice *dev)
{
struct udevice *child;
@@ -39,7 +44,6 @@
int ret;
debug("%s(dev=%p)\n", __func__, dev);
-
drv = lists_driver_lookup_name(rcc_clk->drv_name);
if (!drv) {
debug("Cannot find driver '%s'\n", rcc_clk->drv_name);
@@ -53,9 +57,15 @@
if (ret)
return ret;
+ drv = lists_driver_lookup_name("stm32_rcc_reset");
+ if (!drv) {
+ dev_err(dev, "Cannot find driver stm32_rcc_reset'\n");
+ return -ENOENT;
+ }
+
- return device_bind_driver_to_node(dev, "stm32_rcc_reset",
- "stm32_rcc_reset",
- dev_ofnode(dev), &child);
+ return device_bind_with_driver_data(dev, drv, "stm32_rcc_reset",
+ rcc_clk->soc,
+ dev_ofnode(dev), &child);
}
static const struct misc_ops stm32_rcc_ops = {
@@ -66,6 +76,7 @@
{.compatible = "st,stm32f469-rcc", .data = (ulong)&stm32_rcc_clk_f469 },
{.compatible = "st,stm32f746-rcc", .data = (ulong)&stm32_rcc_clk_f7 },
{.compatible = "st,stm32h743-rcc", .data = (ulong)&stm32_rcc_clk_h7 },
+ {.compatible = "st,stm32mp1-rcc", .data = (ulong)&stm32_rcc_clk_mp1 },
{ }
};
diff --git a/drivers/reset/stm32-reset.c b/drivers/reset/stm32-reset.c
index c21ede2..16d3dba 100644
--- a/drivers/reset/stm32-reset.c
+++ b/drivers/reset/stm32-reset.c
@@ -8,16 +8,12 @@
#include <dm.h>
#include <errno.h>
#include <reset-uclass.h>
+#include <stm32_rcc.h>
#include <asm/io.h>
/* reset clear offset for STM32MP RCC */
#define RCC_CL 0x4
-enum rcc_type {
- RCC_STM32 = 0,
- RCC_STM32MP,
-};
-
struct stm32_reset_priv {
fdt_addr_t base;
};
@@ -40,7 +36,7 @@
debug("%s: reset id = %ld bank = %d offset = %d)\n", __func__,
reset_ctl->id, bank, offset);
- if (dev_get_driver_data(reset_ctl->dev) == RCC_STM32MP)
+ if (dev_get_driver_data(reset_ctl->dev) == STM32MP1)
/* reset assert is done in rcc set register */
writel(BIT(offset), priv->base + bank);
else
@@ -57,7 +53,7 @@
debug("%s: reset id = %ld bank = %d offset = %d)\n", __func__,
reset_ctl->id, bank, offset);
- if (dev_get_driver_data(reset_ctl->dev) == RCC_STM32MP)
+ if (dev_get_driver_data(reset_ctl->dev) == STM32MP1)
/* reset deassert is done in rcc clr register */
writel(BIT(offset), priv->base + bank + RCC_CL);
else
@@ -88,15 +84,9 @@
return 0;
}
-static const struct udevice_id stm32_reset_ids[] = {
- { .compatible = "st,stm32mp1-rcc-rst", .data = RCC_STM32MP },
- { }
-};
-
U_BOOT_DRIVER(stm32_rcc_reset) = {
.name = "stm32_rcc_reset",
.id = UCLASS_RESET,
- .of_match = stm32_reset_ids,
.probe = stm32_reset_probe,
.priv_auto_alloc_size = sizeof(struct stm32_reset_priv),
.ops = &stm32_reset_ops,