arch/arm/dts/zynqmp-sc-revB.dts - filogic/uboot - Gitiles

 // SPDX-License-Identifier: GPL-2.0
 /*
  * dts file for Xilinx ZynqMP Generic System Controller
  *
  * (C) Copyright 2021 - 2022, Xilinx, Inc.
  * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
  *
  * Michal Simek <michal.simek@amd.com>
  */
 /dts-v1/;

 #include "zynqmp.dtsi"
 #include "zynqmp-clk-ccf.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/net/ti-dp83867.h>
 #include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
 #include <dt-bindings/phy/phy.h>

 / {
 	model = "ZynqMP Generic System Controller";
 	compatible = "xlnx,zynqmp-sc-revB", "xlnx,zynqmp-sc", "xlnx,zynqmp";

 	aliases {
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		mmc0 = &sdhci0;
 		mmc1 = &sdhci1;
 		nvmem0 = &eeprom;
 		rtc0 = &rtc;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &dcc;
 		spi0 = &qspi;
 		spi1 = &spi0;
 		spi2 = &spi1;
 	};

 	chosen {
 		bootargs = "earlycon";
 		stdout-path = "serial1:115200n8";
 	};

 	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};

 	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
 		key-fwuen {
 			label = "sw16";
 			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
 			wakeup-source;
 			autorepeat;
 		};
 	};

 	leds {
 		compatible = "gpio-leds";
 		ds40-led {
 			label = "heartbeat";
 			gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 		ds44-led {
 			label = "status";
 			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
 		};
 	};

 	si5332_2: si5332-2 { /* u42 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 	};

 	pwm-fan {
 		compatible = "pwm-fan";
 		status = "okay";
 		pwms = <&ttc0 2 40000 1>;
 	};
 };

 &gpio {
 	status = "okay";
 	gpio-line-names = "QSPI_CLK", "QSPI_DQ1", "QSPI_DQ2", "QSPI_DQ3", "QSPI_DQ0", /* 0 - 4 */
 		"QSPI_CS_B", "", "LED1", "LED2", "", /* 5 - 9 */
 		"", "ZU4_TRIGGER", "FWUEN", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */
 		"EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */
 		"EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST_B", "I2C1_SCL", /* 20 - 24 */
 		"I2C1_SDA", "UART0_RXD", "UART0_TXD", "", "", /* 25 - 29 */
 		"", "", "", "", "I2C0_SCL", /* 30 - 34 */
 		"I2C0_SDA", "UART1_TXD", "UART1_RXD", "GEM_TX_CLK", "GEM_TX_D0", /* 35 - 39 */
 		"GEM_TX_D1", "GEM_TX_D2", "GEM_TX_D3", "GEM_TX_CTL", "GEM_RX_CLK", /* 40 - 44 */
 		"GEM_RX_D0", "GEM_RX_D1", "GEM_RX_D2", "GEM_RX_D3", "GEM_RX_CTL", /* 45 - 49 */
 		"GEM_MDC", "GEM_MDIO", "USB0_CLK", "USB0_DIR", "USB0_DATA2", /* 50 - 54 */
 		"USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", /* 55 - 59 */
 		"USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "", /* 60 - 64 */
 		"", "", "", "", "", /* 65 - 69 */
 		"", "", "", "", "", /* 70 - 74 */
 		"", "", "ETH_RESET_B", /* 75 - 77, MIO end and EMIO start */
 		"", "", /* 78 - 79 */
 		"", "", "", "", "", /* 80 - 84 */
 		"", "", "", "", "", /* 85 -89 */
 		"", "", "", "", "", /* 90 - 94 */
 		"", "", "", "", "", /* 95 - 99 */
 		"", "", "", "", "", /* 100 - 104 */
 		"", "", "", "", "", /* 105 - 109 */
 		"", "", "", "", "", /* 110 - 114 */
 		"", "", "", "", "", /* 115 - 119 */
 		"", "", "", "", "", /* 120 - 124 */
 		"", "", "", "", "", /* 125 - 129 */
 		"", "", "", "", "", /* 130 - 134 */
 		"", "", "", "", "", /* 135 - 139 */
 		"", "", "", "", "", /* 140 - 144 */
 		"", "", "", "", "", /* 145 - 149 */
 		"", "", "", "", "", /* 150 - 154 */
 		"", "", "", "", "", /* 155 - 159 */
 		"", "", "", "", "", /* 160 - 164 */
 		"", "", "", "", "", /* 165 - 169 */
 		"", "", "", ""; /* 170 - 173 */
 };

 &gem1 { /* gem1 MIO38-49, MDIO MIO50/51 */
 	status = "okay";
 	phy-mode = "rgmii-id";
 	phy-handle = <&phy0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gem1_default>;

 	mdio: mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;

 		phy0: ethernet-phy@1 {
 			#phy-cells = <1>;
 			compatible = "ethernet-phy-id2000.a231";
 			reg = <1>;
 			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
 			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 			ti,dp83867-rxctrl-strap-quirk;
 			reset-gpios = <&gpio 77 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <100>;
 			reset-deassert-us = <280>;
 		};
 	};
 };

 &i2c0 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 	status = "okay";
 	clock-frequency = <100000>;
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c0_default>;
 	pinctrl-1 = <&pinctrl_i2c0_gpio>;
 	scl-gpios = <&gpio 34 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio 35 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 };

 &i2c1 { /* i2c1 MIO 24-25 */
 	status = "okay";
 	bootph-all;
 	clock-frequency = <100000>;
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1_default>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
 	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;

 	/* Use for storing information about SC board */
 	eeprom: eeprom@54 { /* u34 - m24128 16kB */
 		compatible = "st,24c128", "atmel,24c128";
 		reg = <0x54>; /* & 0x5c */
 		bootph-all;
 	};
 };

 /* USB 3.0 only */
 &psgtr {
 	status = "okay";
 	/* nc, nc, usb3 */
 	clocks = <&si5332_2>;
 	clock-names = "ref2";
 };

 &qspi { /* MIO 0-5 */
 	status = "okay";
 	/* QSPI should also have PINCTRL setup */
 	flash@0 {
 		compatible = "m25p80", "jedec,spi-nor"; /* mt25qu512abb8e12 512Mib */
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0>;
 		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
 		spi-max-frequency = <40000000>; /* 40MHz */
 		partition@0 {
 			label = "Image Selector";
 			reg = <0x0 0x80000>; /* 512KB */
 			read-only;
 			lock;
 		};
 		partition@80000 {
 			label = "Image Selector Golden";
 			reg = <0x80000 0x80000>; /* 512KB */
 			read-only;
 			lock;
 		};
 		partition@100000 {
 			label = "Persistent Register";
 			reg = <0x100000 0x20000>; /* 128KB */
 		};
 		partition@120000 {
 			label = "Persistent Register Backup";
 			reg = <0x120000 0x20000>; /* 128KB */
 		};
 		partition@140000 {
 			label = "Open_1";
 			reg = <0x140000 0xC0000>; /* 768KB */
 		};
 		partition@200000 {
 			label = "Image A (FSBL, PMU, ATF, U-Boot)";
 			reg = <0x200000 0xD00000>; /* 13MB */
 		};
 		partition@f00000 {
 			label = "ImgSel Image A Catch";
 			reg = <0xF00000 0x80000>; /* 512KB */
 			read-only;
 			lock;
 		};
 		partition@f80000 {
 			label = "Image B (FSBL, PMU, ATF, U-Boot)";
 			reg = <0xF80000 0xD00000>; /* 13MB */
 		};
 		partition@1c80000 {
 			label = "ImgSel Image B Catch";
 			reg = <0x1C80000 0x80000>; /* 512KB */
 			read-only;
 			lock;
 		};
 		partition@1d00000 {
 			label = "Open_2";
 			reg = <0x1D00000 0x100000>; /* 1MB */
 		};
 		partition@1e00000 {
 			label = "Recovery Image";
 			reg = <0x1E00000 0x200000>; /* 2MB */
 			read-only;
 			lock;
 		};
 		partition@2000000 {
 			label = "Recovery Image Backup";
 			reg = <0x2000000 0x200000>; /* 2MB */
 			read-only;
 			lock;
 		};
 		partition@2200000 {
 			label = "U-Boot storage variables";
 			reg = <0x2200000 0x20000>; /* 128KB */
 		};
 		partition@2220000 {
 			label = "U-Boot storage variables backup";
 			reg = <0x2220000 0x20000>; /* 128KB */
 		};
 		partition@2240000 {
 			label = "SHA256";
 			reg = <0x2240000 0x40000>; /* 256B but 256KB sector */
 			read-only;
 			lock;
 		};
 		partition@2280000 {
 			label = "Secure OS Storage";
 			reg = <0x2280000 0x20000>; /* 128KB */
 		};
 		partition@22A0000 {
 			label = "User";
 			reg = <0x22A0000 0x1d60000>; /* 29.375 MB */
 		};
 	};
 };

 &sdhci0 { /* emmc MIO 13-23 - with some settings MTFC16GAPALBH 16GB */
 	status = "okay";
 	non-removable;
 	disable-wp;
 	bus-width = <8>;
 	xlnx,mio-bank = <0>;
 };

 &ttc0 {
 	status = "okay";
 	#pwm-cells = <3>;
 };

 &uart1 { /* uart0 MIO36-37 */
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1_default>;
 };

 &pinctrl0 { /* required by spec */
 	status = "okay";

 	pinctrl_uart1_default: uart1-default {
 		conf {
 			groups = "uart1_9_grp";
 			slew-rate = <SLEW_RATE_SLOW>;
 			power-source = <IO_STANDARD_LVCMOS18>;
 			drive-strength = <12>;
 		};

 		conf-rx {
 			pins = "MIO37";
 			bias-high-impedance;
 		};

 		conf-tx {
 			pins = "MIO36";
 			bias-disable;
 		};

 		mux {
 			groups = "uart1_9_grp";
 			function = "uart1";
 		};
 	};

 	pinctrl_i2c0_default: i2c0-default {
 		mux {
 			groups = "i2c0_8_grp";
 			function = "i2c0";
 		};

 		conf {
 			groups = "i2c0_8_grp";
 			bias-pull-up;
 			slew-rate = <SLEW_RATE_SLOW>;
 			power-source = <IO_STANDARD_LVCMOS18>;
 		};
 	};

 	pinctrl_i2c0_gpio: i2c0-gpio-grp {
 		mux {
 			groups = "gpio0_34_grp", "gpio0_35_grp";
 			function = "gpio0";
 		};

 		conf {
 			groups = "gpio0_34_grp", "gpio0_35_grp";
 			slew-rate = <SLEW_RATE_SLOW>;
 			power-source = <IO_STANDARD_LVCMOS18>;
 		};
 	};

 	pinctrl_i2c1_default: i2c1-default {
 		conf {
 			groups = "i2c1_6_grp";
 			bias-pull-up;
 			slew-rate = <SLEW_RATE_SLOW>;
 			power-source = <IO_STANDARD_LVCMOS18>;
 		};

 		mux {
 			groups = "i2c1_6_grp";
 			function = "i2c1";
 		};
 	};

 	pinctrl_i2c1_gpio: i2c1-gpio-grp {
 		conf {
 			groups = "gpio0_24_grp", "gpio0_25_grp";
 			slew-rate = <SLEW_RATE_SLOW>;
 			power-source = <IO_STANDARD_LVCMOS18>;
 		};

 		mux {
 			groups = "gpio0_24_grp", "gpio0_25_grp";
 			function = "gpio0";
 		};
 	};

 	pinctrl_gem1_default: gem1-default {
 		conf {
 			groups = "ethernet1_0_grp";
 			slew-rate = <SLEW_RATE_SLOW>;
 			power-source = <IO_STANDARD_LVCMOS18>;
 		};

 		conf-rx {
 			pins = "MIO44", "MIO46", "MIO48";
 			bias-high-impedance;
 			low-power-disable;
 		};

 		conf-bootstrap {
 			pins = "MIO45", "MIO47", "MIO49";
 			bias-disable;
 			low-power-disable;
 		};

 		conf-tx {
 			pins = "MIO38", "MIO39", "MIO40",
 				"MIO41", "MIO42", "MIO43";
 			bias-disable;
 			low-power-enable;
 		};

 		conf-mdio {
 			groups = "mdio1_0_grp";
 			slew-rate = <SLEW_RATE_SLOW>;
 			power-source = <IO_STANDARD_LVCMOS18>;
 			bias-disable;
 		};

 		mux-mdio {
 			function = "mdio1";
 			groups = "mdio1_0_grp";
 		};

 		mux {
 			function = "ethernet1";
 			groups = "ethernet1_0_grp";
 		};
 	};
 };
	// SPDX-License-Identifier: GPL-2.0
	/*
	* dts file for Xilinx ZynqMP Generic System Controller
	*
	* (C) Copyright 2021 - 2022, Xilinx, Inc.
	* (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
	*
	* Michal Simek <michal.simek@amd.com>
	*/
	/dts-v1/;

	#include "zynqmp.dtsi"
	#include "zynqmp-clk-ccf.dtsi"
	#include <dt-bindings/input/input.h>
	#include <dt-bindings/gpio/gpio.h>
	#include <dt-bindings/net/ti-dp83867.h>
	#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
	#include <dt-bindings/phy/phy.h>

	/ {
	model = "ZynqMP Generic System Controller";
	compatible = "xlnx,zynqmp-sc-revB", "xlnx,zynqmp-sc", "xlnx,zynqmp";

	aliases {
	i2c0 = &i2c0;
	i2c1 = &i2c1;
	mmc0 = &sdhci0;
	mmc1 = &sdhci1;
	nvmem0 = &eeprom;
	rtc0 = &rtc;
	serial0 = &uart0;
	serial1 = &uart1;
	serial2 = &dcc;
	spi0 = &qspi;
	spi1 = &spi0;
	spi2 = &spi1;
	};

	chosen {
	bootargs = "earlycon";
	stdout-path = "serial1:115200n8";
	};

	memory@0 {
	device_type = "memory";
	reg = <0x0 0x0 0x0 0x80000000>;
	};

	gpio-keys {
	compatible = "gpio-keys";
	autorepeat;
	key-fwuen {
	label = "sw16";
	gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
	linux,code = <BTN_MISC>;
	wakeup-source;
	autorepeat;
	};
	};

	leds {
	compatible = "gpio-leds";
	ds40-led {
	label = "heartbeat";
	gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
	linux,default-trigger = "heartbeat";
	};
	ds44-led {
	label = "status";
	gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
	};
	};

	si5332_2: si5332-2 { /* u42 */
	compatible = "fixed-clock";
	#clock-cells = <0>;
	clock-frequency = <26000000>;
	};

	pwm-fan {
	compatible = "pwm-fan";
	status = "okay";
	pwms = <&ttc0 2 40000 1>;
	};
	};

	&gpio {
	status = "okay";
	gpio-line-names = "QSPI_CLK", "QSPI_DQ1", "QSPI_DQ2", "QSPI_DQ3", "QSPI_DQ0", /* 0 - 4 */
	"QSPI_CS_B", "", "LED1", "LED2", "", /* 5 - 9 */
	"", "ZU4_TRIGGER", "FWUEN", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */
	"EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */
	"EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST_B", "I2C1_SCL", /* 20 - 24 */
	"I2C1_SDA", "UART0_RXD", "UART0_TXD", "", "", /* 25 - 29 */
	"", "", "", "", "I2C0_SCL", /* 30 - 34 */
	"I2C0_SDA", "UART1_TXD", "UART1_RXD", "GEM_TX_CLK", "GEM_TX_D0", /* 35 - 39 */
	"GEM_TX_D1", "GEM_TX_D2", "GEM_TX_D3", "GEM_TX_CTL", "GEM_RX_CLK", /* 40 - 44 */
	"GEM_RX_D0", "GEM_RX_D1", "GEM_RX_D2", "GEM_RX_D3", "GEM_RX_CTL", /* 45 - 49 */
	"GEM_MDC", "GEM_MDIO", "USB0_CLK", "USB0_DIR", "USB0_DATA2", /* 50 - 54 */
	"USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", /* 55 - 59 */
	"USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "", /* 60 - 64 */
	"", "", "", "", "", /* 65 - 69 */
	"", "", "", "", "", /* 70 - 74 */
	"", "", "ETH_RESET_B", /* 75 - 77, MIO end and EMIO start */
	"", "", /* 78 - 79 */
	"", "", "", "", "", /* 80 - 84 */
	"", "", "", "", "", /* 85 -89 */
	"", "", "", "", "", /* 90 - 94 */
	"", "", "", "", "", /* 95 - 99 */
	"", "", "", "", "", /* 100 - 104 */
	"", "", "", "", "", /* 105 - 109 */
	"", "", "", "", "", /* 110 - 114 */
	"", "", "", "", "", /* 115 - 119 */
	"", "", "", "", "", /* 120 - 124 */
	"", "", "", "", "", /* 125 - 129 */
	"", "", "", "", "", /* 130 - 134 */
	"", "", "", "", "", /* 135 - 139 */
	"", "", "", "", "", /* 140 - 144 */
	"", "", "", "", "", /* 145 - 149 */
	"", "", "", "", "", /* 150 - 154 */
	"", "", "", "", "", /* 155 - 159 */
	"", "", "", "", "", /* 160 - 164 */
	"", "", "", "", "", /* 165 - 169 */
	"", "", "", ""; /* 170 - 173 */
	};

	&gem1 { /* gem1 MIO38-49, MDIO MIO50/51 */
	status = "okay";
	phy-mode = "rgmii-id";
	phy-handle = <&phy0>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_gem1_default>;

	mdio: mdio {
	#address-cells = <1>;
	#size-cells = <0>;

	phy0: ethernet-phy@1 {
	#phy-cells = <1>;
	compatible = "ethernet-phy-id2000.a231";
	reg = <1>;
	ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
	ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
	ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
	ti,dp83867-rxctrl-strap-quirk;
	reset-gpios = <&gpio 77 GPIO_ACTIVE_LOW>;
	reset-assert-us = <100>;
	reset-deassert-us = <280>;
	};
	};
	};

	&i2c0 {
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";
	clock-frequency = <100000>;
	pinctrl-names = "default", "gpio";
	pinctrl-0 = <&pinctrl_i2c0_default>;
	pinctrl-1 = <&pinctrl_i2c0_gpio>;
	scl-gpios = <&gpio 34 (GPIO_ACTIVE_HIGH \| GPIO_OPEN_DRAIN)>;
	sda-gpios = <&gpio 35 (GPIO_ACTIVE_HIGH \| GPIO_OPEN_DRAIN)>;
	};

	&i2c1 { /* i2c1 MIO 24-25 */
	status = "okay";
	bootph-all;
	clock-frequency = <100000>;
	pinctrl-names = "default", "gpio";
	pinctrl-0 = <&pinctrl_i2c1_default>;
	pinctrl-1 = <&pinctrl_i2c1_gpio>;
	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH \| GPIO_OPEN_DRAIN)>;
	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH \| GPIO_OPEN_DRAIN)>;

	/* Use for storing information about SC board */
	eeprom: eeprom@54 { /* u34 - m24128 16kB */
	compatible = "st,24c128", "atmel,24c128";
	reg = <0x54>; /* & 0x5c */
	bootph-all;
	};
	};

	/* USB 3.0 only */
	&psgtr {
	status = "okay";
	/* nc, nc, usb3 */
	clocks = <&si5332_2>;
	clock-names = "ref2";
	};

	&qspi { /* MIO 0-5 */
	status = "okay";
	/* QSPI should also have PINCTRL setup */
	flash@0 {
	compatible = "m25p80", "jedec,spi-nor"; /* mt25qu512abb8e12 512Mib */
	#address-cells = <1>;
	#size-cells = <1>;
	reg = <0>;
	spi-tx-bus-width = <4>;
	spi-rx-bus-width = <4>;
	spi-max-frequency = <40000000>; /* 40MHz */
	partition@0 {
	label = "Image Selector";
	reg = <0x0 0x80000>; /* 512KB */
	read-only;
	lock;
	};
	partition@80000 {
	label = "Image Selector Golden";
	reg = <0x80000 0x80000>; /* 512KB */
	read-only;
	lock;
	};
	partition@100000 {
	label = "Persistent Register";
	reg = <0x100000 0x20000>; /* 128KB */
	};
	partition@120000 {
	label = "Persistent Register Backup";
	reg = <0x120000 0x20000>; /* 128KB */
	};
	partition@140000 {
	label = "Open_1";
	reg = <0x140000 0xC0000>; /* 768KB */
	};
	partition@200000 {
	label = "Image A (FSBL, PMU, ATF, U-Boot)";
	reg = <0x200000 0xD00000>; /* 13MB */
	};
	partition@f00000 {
	label = "ImgSel Image A Catch";
	reg = <0xF00000 0x80000>; /* 512KB */
	read-only;
	lock;
	};
	partition@f80000 {
	label = "Image B (FSBL, PMU, ATF, U-Boot)";
	reg = <0xF80000 0xD00000>; /* 13MB */
	};
	partition@1c80000 {
	label = "ImgSel Image B Catch";
	reg = <0x1C80000 0x80000>; /* 512KB */
	read-only;
	lock;
	};
	partition@1d00000 {
	label = "Open_2";
	reg = <0x1D00000 0x100000>; /* 1MB */
	};
	partition@1e00000 {
	label = "Recovery Image";
	reg = <0x1E00000 0x200000>; /* 2MB */
	read-only;
	lock;
	};
	partition@2000000 {
	label = "Recovery Image Backup";
	reg = <0x2000000 0x200000>; /* 2MB */
	read-only;
	lock;
	};
	partition@2200000 {
	label = "U-Boot storage variables";
	reg = <0x2200000 0x20000>; /* 128KB */
	};
	partition@2220000 {
	label = "U-Boot storage variables backup";
	reg = <0x2220000 0x20000>; /* 128KB */
	};
	partition@2240000 {
	label = "SHA256";
	reg = <0x2240000 0x40000>; /* 256B but 256KB sector */
	read-only;
	lock;
	};
	partition@2280000 {
	label = "Secure OS Storage";
	reg = <0x2280000 0x20000>; /* 128KB */
	};
	partition@22A0000 {
	label = "User";
	reg = <0x22A0000 0x1d60000>; /* 29.375 MB */
	};
	};
	};

	&sdhci0 { /* emmc MIO 13-23 - with some settings MTFC16GAPALBH 16GB */
	status = "okay";
	non-removable;
	disable-wp;
	bus-width = <8>;
	xlnx,mio-bank = <0>;
	};

	&ttc0 {
	status = "okay";
	#pwm-cells = <3>;
	};

	&uart1 { /* uart0 MIO36-37 */
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1_default>;
	};

	&pinctrl0 { /* required by spec */
	status = "okay";

	pinctrl_uart1_default: uart1-default {
	conf {
	groups = "uart1_9_grp";
	slew-rate = <SLEW_RATE_SLOW>;
	power-source = <IO_STANDARD_LVCMOS18>;
	drive-strength = <12>;
	};

	conf-rx {
	pins = "MIO37";
	bias-high-impedance;
	};

	conf-tx {
	pins = "MIO36";
	bias-disable;
	};

	mux {
	groups = "uart1_9_grp";
	function = "uart1";
	};
	};

	pinctrl_i2c0_default: i2c0-default {
	mux {
	groups = "i2c0_8_grp";
	function = "i2c0";
	};

	conf {
	groups = "i2c0_8_grp";
	bias-pull-up;
	slew-rate = <SLEW_RATE_SLOW>;
	power-source = <IO_STANDARD_LVCMOS18>;
	};
	};

	pinctrl_i2c0_gpio: i2c0-gpio-grp {
	mux {
	groups = "gpio0_34_grp", "gpio0_35_grp";
	function = "gpio0";
	};

	conf {
	groups = "gpio0_34_grp", "gpio0_35_grp";
	slew-rate = <SLEW_RATE_SLOW>;
	power-source = <IO_STANDARD_LVCMOS18>;
	};
	};

	pinctrl_i2c1_default: i2c1-default {
	conf {
	groups = "i2c1_6_grp";
	bias-pull-up;
	slew-rate = <SLEW_RATE_SLOW>;
	power-source = <IO_STANDARD_LVCMOS18>;
	};

	mux {
	groups = "i2c1_6_grp";
	function = "i2c1";
	};
	};

	pinctrl_i2c1_gpio: i2c1-gpio-grp {
	conf {
	groups = "gpio0_24_grp", "gpio0_25_grp";
	slew-rate = <SLEW_RATE_SLOW>;
	power-source = <IO_STANDARD_LVCMOS18>;
	};

	mux {
	groups = "gpio0_24_grp", "gpio0_25_grp";
	function = "gpio0";
	};
	};

	pinctrl_gem1_default: gem1-default {
	conf {
	groups = "ethernet1_0_grp";
	slew-rate = <SLEW_RATE_SLOW>;
	power-source = <IO_STANDARD_LVCMOS18>;
	};

	conf-rx {
	pins = "MIO44", "MIO46", "MIO48";
	bias-high-impedance;
	low-power-disable;
	};

	conf-bootstrap {
	pins = "MIO45", "MIO47", "MIO49";
	bias-disable;
	low-power-disable;
	};

	conf-tx {
	pins = "MIO38", "MIO39", "MIO40",
	"MIO41", "MIO42", "MIO43";
	bias-disable;
	low-power-enable;
	};

	conf-mdio {
	groups = "mdio1_0_grp";
	slew-rate = <SLEW_RATE_SLOW>;
	power-source = <IO_STANDARD_LVCMOS18>;
	bias-disable;
	};

	mux-mdio {
	function = "mdio1";
	groups = "mdio1_0_grp";
	};

	mux {
	function = "ethernet1";
	groups = "ethernet1_0_grp";
	};
	};
	};