blob: db72c64b1edbcad526efb7dd909443e95919e1d4 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Devicetree file for running sandbox tests
*
* This includes lots of extra devices used by various tests.
*
* Note that SPL use the main sandbox.dts file
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/gpio/sandbox-gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/sandbox-pinmux.h>
#include <dt-bindings/mux/mux.h>
/ {
model = "sandbox";
compatible = "sandbox";
#address-cells = <1>;
#size-cells = <1>;
aliases {
console = &uart0;
ethernet0 = "/eth@10002000";
ethernet2 = &swp_0;
ethernet3 = &eth_3;
ethernet4 = &dsa_eth0;
ethernet5 = &eth_5;
ethernet6 = "/eth@10004000";
ethernet7 = &swp_1;
ethernet8 = &phy_eth0;
gpio1 = &gpio_a;
gpio2 = &gpio_b;
gpio3 = &gpio_c;
i2c0 = "/i2c@0";
mmc0 = "/mmc0";
mmc1 = "/mmc1";
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
remoteproc0 = &rproc_1;
remoteproc1 = &rproc_2;
rtc0 = &rtc_0;
rtc1 = &rtc_1;
spi0 = "/spi@0";
testfdt6 = "/e-test";
testbus3 = "/some-bus";
testfdt0 = "/some-bus/c-test@0";
testfdt12 = "/some-bus/c-test@1";
testfdt3 = "/b-test";
testfdt5 = "/some-bus/c-test@5";
testfdt8 = "/a-test";
testfdtm1 = &testfdtm1;
fdt-dummy0 = "/translation-test@8000/dev@0,0";
fdt-dummy1 = "/translation-test@8000/dev@1,100";
fdt-dummy2 = "/translation-test@8000/dev@2,200";
fdt-dummy3 = "/translation-test@8000/noxlatebus@3,300/dev@42";
usb0 = &usb_0;
usb1 = &usb_1;
usb2 = &usb_2;
axi0 = &axi;
osd0 = "/osd";
};
binman {
};
config {
testing-bool;
testing-int = <123>;
testing-str = "testing";
environment {
from_fdt = "yes";
fdt_env_path = "";
};
};
bootstd {
compatible = "u-boot,boot-std";
filename-prefixes = "/", "/boot/";
bootdev-order = "mmc2", "mmc1";
syslinux {
compatible = "u-boot,distro-syslinux";
};
efi {
compatible = "u-boot,distro-efi";
};
};
fuzzing-engine {
compatible = "sandbox,fuzzing-engine";
};
reboot-mode0 {
compatible = "reboot-mode-gpio";
gpios = <&gpio_c 0 GPIO_ACTIVE_HIGH>, <&gpio_c 1 GPIO_ACTIVE_HIGH>;
u-boot,env-variable = "bootstatus";
mode-test = <0x01>;
mode-download = <0x03>;
};
reboot_mode1: reboot-mode@14 {
compatible = "reboot-mode-rtc";
rtc = <&rtc_0>;
reg = <0x30 4>;
u-boot,env-variable = "bootstatus";
big-endian;
mode-test = <0x21969147>;
mode-download = <0x51939147>;
};
audio: audio-codec {
compatible = "sandbox,audio-codec";
#sound-dai-cells = <1>;
};
buttons {
compatible = "gpio-keys";
btn1 {
gpios = <&gpio_a 3 0>;
label = "button1";
};
btn2 {
gpios = <&gpio_a 4 0>;
label = "button2";
};
};
buttons2 {
compatible = "adc-keys";
io-channels = <&adc 3>;
keyup-threshold-microvolt = <3000000>;
button-up {
label = "button3";
linux,code = <KEY_F3>;
press-threshold-microvolt = <1500000>;
};
button-down {
label = "button4";
linux,code = <KEY_F4>;
press-threshold-microvolt = <1000000>;
};
button-enter {
label = "button5";
linux,code = <KEY_F5>;
press-threshold-microvolt = <500000>;
};
};
cros_ec: cros-ec {
reg = <0 0>;
compatible = "google,cros-ec-sandbox";
/*
* This describes the flash memory within the EC. Note
* that the STM32L flash erases to 0, not 0xff.
*/
flash {
image-pos = <0x08000000>;
size = <0x20000>;
erase-value = <0>;
/* Information for sandbox */
ro {
image-pos = <0>;
size = <0xf000>;
};
wp-ro {
image-pos = <0xf000>;
size = <0x1000>;
used = <0x884>;
compress = "lz4";
uncomp-size = <0xcf8>;
hash {
algo = "sha256";
value = [00 01 02 03 04 05 06 07
08 09 0a 0b 0c 0d 0e 0f
10 11 12 13 14 15 16 17
18 19 1a 1b 1c 1d 1e 1f];
};
};
rw {
image-pos = <0x10000>;
size = <0x10000>;
};
};
cros_ec_pwm: cros-ec-pwm {
compatible = "google,cros-ec-pwm";
#pwm-cells = <1>;
};
};
dsi_host: dsi_host {
compatible = "sandbox,dsi-host";
};
a-test {
reg = <0 1>;
compatible = "denx,u-boot-fdt-test";
ping-expect = <0>;
ping-add = <0>;
u-boot,dm-pre-reloc;
test-gpios = <&gpio_a 1>, <&gpio_a 4>,
<&gpio_b 5 GPIO_ACTIVE_HIGH 3 2 1>,
<0>, <&gpio_a 12>;
test2-gpios = <&gpio_a 1>, <&gpio_a 4>,
<&gpio_b 6 GPIO_ACTIVE_LOW 3 2 1>,
<&gpio_b 7 GPIO_IN 3 2 1>,
<&gpio_b 8 GPIO_OUT 3 2 1>,
<&gpio_b 9 (GPIO_OUT|GPIO_OUT_ACTIVE) 3 2 1>;
test3-gpios =
<&gpio_c 0 (GPIO_OUT|GPIO_OPEN_DRAIN)>,
<&gpio_c 1 (GPIO_OUT|GPIO_OPEN_SOURCE)>,
<&gpio_c 2 GPIO_OUT>,
<&gpio_c 3 (GPIO_IN|GPIO_PULL_UP)>,
<&gpio_c 4 (GPIO_IN|GPIO_PULL_DOWN)>,
<&gpio_c 5 GPIO_IN>,
<&gpio_c 6 (GPIO_ACTIVE_LOW|GPIO_OUT|GPIO_OPEN_DRAIN)>,
<&gpio_c 7 (GPIO_ACTIVE_LOW|GPIO_OUT|GPIO_OPEN_SOURCE)>;
test4-gpios = <&gpio_a 14>, <&gpio_b 4 1 3 2 1>;
test5-gpios = <&gpio_a 19>;
bool-value;
int8-value = /bits/ 8 <0x12>;
int16-value = /bits/ 16 <0x1234>;
int-value = <1234>;
uint-value = <(-1234)>;
int64-value = /bits/ 64 <0x1111222233334444>;
int-array = <5678 9123 4567>;
str-value = "test string";
interrupts-extended = <&irq 3 0>;
acpi,name = "GHIJ";
phandle-value = <&gpio_c 10>, <0xFFFFFFFF 20>, <&gpio_a 30>;
mux-controls = <&muxcontroller0 0>, <&muxcontroller0 1>,
<&muxcontroller0 2>, <&muxcontroller0 3>,
<&muxcontroller1>;
mux-control-names = "mux0", "mux1", "mux2", "mux3", "mux4";
mux-syscon = <&syscon3>;
display-timings {
timing0: 240x320 {
clock-frequency = <6500000>;
hactive = <240>;
vactive = <320>;
hfront-porch = <6>;
hback-porch = <7>;
hsync-len = <1>;
vback-porch = <5>;
vfront-porch = <8>;
vsync-len = <2>;
hsync-active = <1>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
interlaced;
doublescan;
doubleclk;
};
timing1: 480x800 {
clock-frequency = <9000000>;
hactive = <480>;
vactive = <800>;
hfront-porch = <10>;
hback-porch = <59>;
hsync-len = <12>;
vback-porch = <15>;
vfront-porch = <17>;
vsync-len = <16>;
hsync-active = <0>;
vsync-active = <1>;
de-active = <0>;
pixelclk-active = <0>;
};
timing2: 800x480 {
clock-frequency = <33500000>;
hactive = <800>;
vactive = <480>;
hback-porch = <89>;
hfront-porch = <164>;
vback-porch = <23>;
vfront-porch = <10>;
hsync-len = <11>;
vsync-len = <13>;
};
};
};
junk {
reg = <1 1>;
compatible = "not,compatible";
};
no-compatible {
reg = <2 1>;
};
backlight: backlight {
compatible = "pwm-backlight";
enable-gpios = <&gpio_a 1>;
power-supply = <&ldo_1>;
pwms = <&pwm 0 1000>;
default-brightness-level = <5>;
brightness-levels = <0 16 32 64 128 170 202 234 255>;
};
bind-test {
compatible = "simple-bus";
bind-test-child1 {
compatible = "sandbox,phy";
#phy-cells = <1>;
};
bind-test-child2 {
compatible = "simple-bus";
};
};
b-test {
reg = <3 1>;
compatible = "denx,u-boot-fdt-test";
ping-expect = <3>;
ping-add = <3>;
mux-controls = <&muxcontroller0 0>;
mux-control-names = "mux0";
};
phy_provider0: gen_phy@0 {
compatible = "sandbox,phy";
#phy-cells = <1>;
};
phy_provider1: gen_phy@1 {
compatible = "sandbox,phy";
#phy-cells = <0>;
broken;
};
phy_provider2: gen_phy@2 {
compatible = "sandbox,phy";
#phy-cells = <0>;
};
gen_phy_user: gen_phy_user {
compatible = "simple-bus";
phys = <&phy_provider0 0>, <&phy_provider0 1>, <&phy_provider1>;
phy-names = "phy1", "phy2", "phy3";
};
gen_phy_user1: gen_phy_user1 {
compatible = "simple-bus";
phys = <&phy_provider0 0>, <&phy_provider2>;
phy-names = "phy1", "phy2";
};
some-bus {
#address-cells = <1>;
#size-cells = <0>;
compatible = "denx,u-boot-test-bus";
reg = <3 1>;
ping-expect = <4>;
ping-add = <4>;
c-test@5 {
compatible = "denx,u-boot-fdt-test";
reg = <5>;
ping-expect = <5>;
ping-add = <5>;
};
c-test@0 {
compatible = "denx,u-boot-fdt-test";
reg = <0>;
ping-expect = <6>;
ping-add = <6>;
};
c-test@1 {
compatible = "denx,u-boot-fdt-test";
reg = <1>;
ping-expect = <7>;
ping-add = <7>;
};
};
d-test {
reg = <3 1>;
ping-expect = <6>;
ping-add = <6>;
compatible = "google,another-fdt-test";
};
e-test {
reg = <3 1>;
ping-expect = <6>;
ping-add = <6>;
compatible = "google,another-fdt-test";
};
f-test {
compatible = "denx,u-boot-fdt-test";
};
g-test {
compatible = "denx,u-boot-fdt-test";
};
h-test {
compatible = "denx,u-boot-fdt-test1";
};
i-test {
compatible = "mediatek,u-boot-fdt-test";
#address-cells = <1>;
#size-cells = <0>;
subnode@0 {
reg = <0>;
};
subnode@1 {
reg = <1>;
};
subnode@2 {
reg = <2>;
};
};
devres-test {
compatible = "denx,u-boot-devres-test";
};
another-test {
reg = <0 2>;
compatible = "denx,u-boot-fdt-test";
test4-gpios = <&gpio_a 14>, <&gpio_b 4 1 3 2 1>;
test5-gpios = <&gpio_a 19>;
};
mmio-bus@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "denx,u-boot-test-bus";
dma-ranges = <0x10000000 0x00000000 0x00040000>;
subnode@0 {
compatible = "denx,u-boot-fdt-test";
};
};
mmio-bus@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "denx,u-boot-test-bus";
subnode@0 {
compatible = "denx,u-boot-fdt-test";
};
};
acpi_test1: acpi-test {
compatible = "denx,u-boot-acpi-test";
acpi-ssdt-test-data = "ab";
acpi-dsdt-test-data = "hi";
child {
compatible = "denx,u-boot-acpi-test";
};
};
acpi_test2: acpi-test2 {
compatible = "denx,u-boot-acpi-test";
acpi-ssdt-test-data = "cd";
acpi-dsdt-test-data = "jk";
};
clocks {
clk_fixed: clk-fixed {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <1234>;
};
clk_fixed_factor: clk-fixed-factor {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clock-div = <3>;
clock-mult = <2>;
clocks = <&clk_fixed>;
};
osc {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <20000000>;
};
};
clk_sandbox: clk-sbox {
compatible = "sandbox,clk";
#clock-cells = <1>;
assigned-clocks = <&clk_sandbox 3>;
assigned-clock-rates = <321>;
};
clk-test {
compatible = "sandbox,clk-test";
clocks = <&clk_fixed>,
<&clk_sandbox 1>,
<&clk_sandbox 0>,
<&clk_sandbox 3>,
<&clk_sandbox 2>;
clock-names = "fixed", "i2c", "spi", "uart2", "uart1";
};
ccf: clk-ccf {
compatible = "sandbox,clk-ccf";
};
efi-media {
compatible = "sandbox,efi-media";
};
eth@10002000 {
compatible = "sandbox,eth";
reg = <0x10002000 0x1000>;
};
eth_5: eth@10003000 {
compatible = "sandbox,eth";
reg = <0x10003000 0x1000>;
nvmem-cells = <&eth5_addr>;
nvmem-cell-names = "mac-address";
};
eth_3: sbe5 {
compatible = "sandbox,eth";
reg = <0x10005000 0x1000>;
nvmem-cells = <&eth3_addr>;
nvmem-cell-names = "mac-address";
};
eth@10004000 {
compatible = "sandbox,eth";
reg = <0x10004000 0x1000>;
};
phy_eth0: phy-test-eth {
compatible = "sandbox,eth";
reg = <0x10007000 0x1000>;
mac-address = [ 02 00 11 22 33 49 ];
phy-handle = <&ethphy1>;
phy-mode = "2500base-x";
};
dsa_eth0: dsa-test-eth {
compatible = "sandbox,eth";
reg = <0x10006000 0x1000>;
nvmem-cells = <&eth4_addr>;
nvmem-cell-names = "mac-address";
};
dsa-test {
compatible = "sandbox,dsa";
ports {
#address-cells = <1>;
#size-cells = <0>;
swp_0: port@0 {
reg = <0>;
label = "lan0";
phy-mode = "rgmii-rxid";
fixed-link {
speed = <100>;
full-duplex;
};
};
swp_1: port@1 {
reg = <1>;
label = "lan1";
phy-mode = "rgmii-txid";
fixed-link = <0 1 100 0 0>;
};
port@2 {
reg = <2>;
ethernet = <&dsa_eth0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
firmware {
sandbox_firmware: sandbox-firmware {
compatible = "sandbox,firmware";
};
scmi {
compatible = "sandbox,scmi-agent";
#address-cells = <1>;
#size-cells = <0>;
protocol@10 {
reg = <0x10>;
};
clk_scmi: protocol@14 {
reg = <0x14>;
#clock-cells = <1>;
};
reset_scmi: protocol@16 {
reg = <0x16>;
#reset-cells = <1>;
};
protocol@17 {
reg = <0x17>;
regulators {
#address-cells = <1>;
#size-cells = <0>;
regul0_scmi: reg@0 {
reg = <0>;
regulator-name = "sandbox-voltd0";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <3300000>;
};
regul1_scmi: reg@1 {
reg = <0x1>;
regulator-name = "sandbox-voltd1";
regulator-min-microvolt = <1800000>;
};
};
};
};
};
fpga {
compatible = "sandbox,fpga";
};
pinctrl-gpio {
compatible = "sandbox,pinctrl-gpio";
gpio_a: base-gpios {
compatible = "sandbox,gpio";
gpio-controller;
#gpio-cells = <1>;
gpio-bank-name = "a";
sandbox,gpio-count = <20>;
hog_input_active_low {
gpio-hog;
input;
gpios = <10 GPIO_ACTIVE_LOW>;
};
hog_input_active_high {
gpio-hog;
input;
gpios = <11 GPIO_ACTIVE_HIGH>;
};
hog_output_low {
gpio-hog;
output-low;
gpios = <12 GPIO_ACTIVE_HIGH>;
};
hog_output_high {
gpio-hog;
output-high;
gpios = <13 GPIO_ACTIVE_HIGH>;
};
};
gpio_b: extra-gpios {
compatible = "sandbox,gpio";
gpio-controller;
#gpio-cells = <5>;
gpio-bank-name = "b";
sandbox,gpio-count = <10>;
};
gpio_c: pinmux-gpios {
compatible = "sandbox,gpio";
gpio-controller;
#gpio-cells = <2>;
gpio-bank-name = "c";
sandbox,gpio-count = <10>;
};
};
i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0 1>;
compatible = "sandbox,i2c";
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinmux_i2c0_pins>;
eeprom@2c {
#address-cells = <1>;
#size-cells = <1>;
reg = <0x2c>;
compatible = "i2c-eeprom";
sandbox,emul = <&emul_eeprom>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
bootcount_i2c: bootcount@10 {
reg = <10 2>;
};
};
eth3_addr: mac-address@24 {
reg = <24 6>;
};
};
rtc_0: rtc@43 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0x43>;
compatible = "sandbox-rtc";
sandbox,emul = <&emul0>;
eth4_addr: mac-address@40 {
reg = <0x40 6>;
};
};
rtc_1: rtc@61 {
reg = <0x61>;
compatible = "sandbox-rtc";
sandbox,emul = <&emul1>;
};
i2c_emul: emul {
reg = <0xff>;
compatible = "sandbox,i2c-emul-parent";
emul_eeprom: emul-eeprom {
compatible = "sandbox,i2c-eeprom";
sandbox,filename = "i2c.bin";
sandbox,size = <256>;
};
emul0: emul0 {
compatible = "sandbox,i2c-rtc-emul";
};
emul1: emull {
compatible = "sandbox,i2c-rtc-emul";
};
};
sandbox_pmic: sandbox_pmic {
reg = <0x40>;
sandbox,emul = <&emul_pmic0>;
};
mc34708: pmic@41 {
reg = <0x41>;
sandbox,emul = <&emul_pmic1>;
};
};
bootcount@0 {
compatible = "u-boot,bootcount-rtc";
rtc = <&rtc_1>;
offset = <0x13>;
};
bootcount {
compatible = "u-boot,bootcount-i2c-eeprom";
i2c-eeprom = <&bootcount_i2c>;
};
bootcount_4@0 {
compatible = "u-boot,bootcount-syscon";
syscon = <&syscon0>;
reg = <0x0 0x04>, <0x0 0x04>;
reg-names = "syscon_reg", "offset";
};
bootcount_2@0 {
compatible = "u-boot,bootcount-syscon";
syscon = <&syscon0>;
reg = <0x0 0x04>, <0x0 0x02> ;
reg-names = "syscon_reg", "offset";
};
adc: adc@0 {
compatible = "sandbox,adc";
#io-channel-cells = <1>;
vdd-supply = <&buck2>;
vss-microvolts = <0>;
};
iommu: iommu@0 {
compatible = "sandbox,iommu";
#iommu-cells = <0>;
};
irq: irq {
compatible = "sandbox,irq";
interrupt-controller;
#interrupt-cells = <2>;
};
lcd {
u-boot,dm-pre-reloc;
compatible = "sandbox,lcd-sdl";
pinctrl-names = "default";
pinctrl-0 = <&pinmux_lcd_pins>;
xres = <1366>;
yres = <768>;
};
leds {
compatible = "gpio-leds";
iracibble {
gpios = <&gpio_a 1 0>;
label = "sandbox:red";
};
martinet {
gpios = <&gpio_a 2 0>;
label = "sandbox:green";
};
default_on {
gpios = <&gpio_a 5 0>;
label = "sandbox:default_on";
default-state = "on";
};
default_off {
gpios = <&gpio_a 6 0>;
/* label intentionally omitted */
default-state = "off";
};
};
wdt-gpio-toggle {
gpios = <&gpio_a 7 0>;
compatible = "linux,wdt-gpio";
hw_margin_ms = <100>;
hw_algo = "toggle";
always-running;
};
wdt-gpio-level {
gpios = <&gpio_a 7 0>;
compatible = "linux,wdt-gpio";
hw_margin_ms = <100>;
hw_algo = "level";
always-running;
};
mbox: mbox {
compatible = "sandbox,mbox";
#mbox-cells = <1>;
};
mbox-test {
compatible = "sandbox,mbox-test";
mboxes = <&mbox 100>, <&mbox 1>;
mbox-names = "other", "test";
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
timebase-frequency = <2000000>;
cpu1: cpu@1 {
device_type = "cpu";
reg = <0x1>;
timebase-frequency = <3000000>;
compatible = "sandbox,cpu_sandbox";
u-boot,dm-pre-reloc;
};
cpu2: cpu@2 {
device_type = "cpu";
reg = <0x2>;
compatible = "sandbox,cpu_sandbox";
u-boot,dm-pre-reloc;
};
cpu3: cpu@3 {
device_type = "cpu";
reg = <0x3>;
compatible = "sandbox,cpu_sandbox";
u-boot,dm-pre-reloc;
};
};
chipid: chipid {
compatible = "sandbox,soc";
};
i2s: i2s {
compatible = "sandbox,i2s";
#sound-dai-cells = <1>;
sandbox,silent; /* Don't emit sounds while testing */
};
nop-test_0 {
compatible = "sandbox,nop_sandbox1";
nop-test_1 {
compatible = "sandbox,nop_sandbox2";
bind = "True";
};
nop-test_2 {
compatible = "sandbox,nop_sandbox2";
bind = "False";
};
};
memory-controller {
compatible = "sandbox,memory";
};
misc-test {
#address-cells = <1>;
#size-cells = <1>;
compatible = "sandbox,misc_sandbox";
eth5_addr: mac-address@10 {
reg = <0x10 6>;
};
};
mmc2 {
compatible = "sandbox,mmc";
non-removable;
};
/* This is used for the bootdev tests */
mmc1 {
compatible = "sandbox,mmc";
filename = "mmc1.img";
};
/* This is used for the fastboot tests */
mmc0 {
compatible = "sandbox,mmc";
};
pch {
compatible = "sandbox,pch";
};
pci0: pci@0 {
compatible = "sandbox,pci";
device_type = "pci";
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x02000000 0 0x10000000 0x10000000 0 0x2000000
0x01000000 0 0x20000000 0x20000000 0 0x2000>;
pci@0,0 {
compatible = "pci-generic";
reg = <0x0000 0 0 0 0>;
sandbox,emul = <&swap_case_emul0_0>;
};
pci@1,0 {
compatible = "pci-generic";
/* reg 0 is at 0x14, using FDT_PCI_SPACE_MEM32 */
reg = <0x02000814 0 0 0 0
0x01000810 0 0 0 0>;
sandbox,emul = <&swap_case_emul0_1>;
};
p2sb-pci@2,0 {
compatible = "sandbox,p2sb";
reg = <0x02001010 0 0 0 0>;
sandbox,emul = <&p2sb_emul>;
adder {
intel,p2sb-port-id = <3>;
compatible = "sandbox,adder";
};
};
pci@1e,0 {
compatible = "sandbox,pmc";
reg = <0xf000 0 0 0 0>;
sandbox,emul = <&pmc_emul1e>;
acpi-base = <0x400>;
gpe0-dwx-mask = <0xf>;
gpe0-dwx-shift-base = <4>;
gpe0-dw = <6 7 9>;
gpe0-sts = <0x20>;
gpe0-en = <0x30>;
};
pci@1f,0 {
compatible = "pci-generic";
/* reg 0 is at 0x10, using FDT_PCI_SPACE_IO */
reg = <0x0100f810 0 0 0 0>;
sandbox,emul = <&swap_case_emul0_1f>;
};
};
pci-emul0 {
compatible = "sandbox,pci-emul-parent";
swap_case_emul0_0: emul0@0,0 {
compatible = "sandbox,swap-case";
};
swap_case_emul0_1: emul0@1,0 {
compatible = "sandbox,swap-case";
use-ea;
};
swap_case_emul0_1f: emul0@1f,0 {
compatible = "sandbox,swap-case";
};
p2sb_emul: emul@2,0 {
compatible = "sandbox,p2sb-emul";
};
pmc_emul1e: emul@1e,0 {
compatible = "sandbox,pmc-emul";
};
};
pci1: pci@1 {
compatible = "sandbox,pci";
device_type = "pci";
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x02000000 0 0x30000000 0x30000000 0 0x2000 // MEM0
0x02000000 0 0x31000000 0x3e000000 0 0x2000 // MEM1
0x01000000 0 0x40000000 0x40000000 0 0x2000>;
sandbox,dev-info = <0x08 0x00 0x1234 0x5678
0x0c 0x00 0x1234 0x5678
0x10 0x00 0x1234 0x5678>;
pci@10,0 {
reg = <0x8000 0 0 0 0>;
};
};
pci2: pci@2 {
compatible = "sandbox,pci";
device_type = "pci";
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x02000000 0 0x50000000 0x50000000 0 0x2000
0x01000000 0 0x60000000 0x60000000 0 0x2000>;
sandbox,dev-info = <0x08 0x00 0x1234 0x5678>;
pci@1f,0 {
compatible = "pci-generic";
reg = <0xf800 0 0 0 0>;
sandbox,emul = <&swap_case_emul2_1f>;
};
};
pci-emul2 {
compatible = "sandbox,pci-emul-parent";
swap_case_emul2_1f: emul2@1f,0 {
compatible = "sandbox,swap-case";
};
};
pci_ep: pci_ep {
compatible = "sandbox,pci_ep";
};
probing {
compatible = "simple-bus";
test1 {
compatible = "denx,u-boot-probe-test";
};
test2 {
compatible = "denx,u-boot-probe-test";
};
test3 {
compatible = "denx,u-boot-probe-test";
};
test4 {
compatible = "denx,u-boot-probe-test";
first-syscon = <&syscon0>;
second-sys-ctrl = <&another_system_controller>;
third-syscon = <&syscon2>;
};
};
pwrdom: power-domain {
compatible = "sandbox,power-domain";
#power-domain-cells = <1>;
};
power-domain-test {
compatible = "sandbox,power-domain-test";
power-domains = <&pwrdom 2>;
};
pwm: pwm {
compatible = "sandbox,pwm";
#pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinmux_pwm_pins>;
};
pwm2 {
compatible = "sandbox,pwm";
#pwm-cells = <2>;
};
ram {
compatible = "sandbox,ram";
};
reset@0 {
compatible = "sandbox,warm-reset";
u-boot,dm-pre-proper;
};
reset@1 {
compatible = "sandbox,reset";
u-boot,dm-pre-proper;
};
resetc: reset-ctl {
compatible = "sandbox,reset-ctl";
#reset-cells = <1>;
};
reset-ctl-test {
compatible = "sandbox,reset-ctl-test";
resets = <&resetc 100>, <&resetc 2>, <&resetc 20>, <&resetc 40>;
reset-names = "other", "test", "test2", "test3";
};
rng {
compatible = "sandbox,sandbox-rng";
};
rproc_1: rproc@1 {
compatible = "sandbox,test-processor";
remoteproc-name = "remoteproc-test-dev1";
};
rproc_2: rproc@2 {
compatible = "sandbox,test-processor";
internal-memory-mapped;
remoteproc-name = "remoteproc-test-dev2";
};
panel {
compatible = "simple-panel";
backlight = <&backlight 0 100>;
};
scsi {
compatible = "sandbox,scsi";
sandbox,filepath = "scsi.img";
};
smem@0 {
compatible = "sandbox,smem";
};
sound {
compatible = "sandbox,sound";
cpu {
sound-dai = <&i2s 0>;
};
codec {
sound-dai = <&audio 0>;
};
};
spi@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0 1>;
compatible = "sandbox,spi";
cs-gpios = <0>, <0>, <&gpio_a 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinmux_spi0_pins>;
spi.bin@0 {
reg = <0>;
compatible = "spansion,m25p16", "jedec,spi-nor";
spi-max-frequency = <40000000>;
sandbox,filename = "spi.bin";
};
spi.bin@1 {
reg = <1>;
compatible = "spansion,m25p16", "jedec,spi-nor";
spi-max-frequency = <50000000>;
sandbox,filename = "spi.bin";
spi-cpol;
spi-cpha;
};
};
syscon0: syscon@0 {
compatible = "sandbox,syscon0";
reg = <0x10 16>;
};
another_system_controller: syscon@1 {
compatible = "sandbox,syscon1";
reg = <0x20 5
0x28 6
0x30 7
0x38 8>;
};
syscon2: syscon@2 {
compatible = "simple-mfd", "syscon";
reg = <0x40 5
0x48 6
0x50 7
0x58 8>;
};
syscon3: syscon@3 {
compatible = "simple-mfd", "syscon";
reg = <0x000100 0x10>;
muxcontroller0: a-mux-controller {
compatible = "mmio-mux";
#mux-control-cells = <1>;
mux-reg-masks = <0x0 0x30>, /* 0: reg 0x0, bits 5:4 */
<0xc 0x1E>, /* 1: reg 0xc, bits 4:1 */
<0x4 0xFF>; /* 2: reg 0x4, bits 7:0 */
idle-states = <MUX_IDLE_AS_IS>, <0x02>, <0x73>;
u-boot,mux-autoprobe;
};
};
muxcontroller1: emul-mux-controller {
compatible = "mux-emul";
#mux-control-cells = <0>;
u-boot,mux-autoprobe;
idle-state = <0xabcd>;
};
testfdtm0 {
compatible = "denx,u-boot-fdtm-test";
};
testfdtm1: testfdtm1 {
compatible = "denx,u-boot-fdtm-test";
};
testfdtm2 {
compatible = "denx,u-boot-fdtm-test";
};
timer@0 {
compatible = "sandbox,timer";
clock-frequency = <1000000>;
};
timer@1 {
compatible = "sandbox,timer";
sandbox,timebase-frequency-fallback;
};
tpm2 {
compatible = "sandbox,tpm2";
};
uart0: serial {
compatible = "sandbox,serial";
u-boot,dm-pre-reloc;
pinctrl-names = "default";
pinctrl-0 = <&pinmux_uart0_pins>;
};
usb_0: usb@0 {
compatible = "sandbox,usb";
status = "disabled";
hub {
compatible = "sandbox,usb-hub";
#address-cells = <1>;
#size-cells = <0>;
flash-stick {
reg = <0>;
compatible = "sandbox,usb-flash";
};
};
};
usb_1: usb@1 {
compatible = "sandbox,usb";
iommus = <&iommu>;
hub {
compatible = "usb-hub";
usb,device-class = <9>;
#address-cells = <1>;
#size-cells = <0>;
hub-emul {
compatible = "sandbox,usb-hub";
#address-cells = <1>;
#size-cells = <0>;
flash-stick@0 {
reg = <0>;
compatible = "sandbox,usb-flash";
sandbox,filepath = "testflash.bin";
};
flash-stick@1 {
reg = <1>;
compatible = "sandbox,usb-flash";
sandbox,filepath = "testflash1.bin";
};
flash-stick@2 {
reg = <2>;
compatible = "sandbox,usb-flash";
sandbox,filepath = "testflash2.bin";
};
keyb@3 {
reg = <3>;
compatible = "sandbox,usb-keyb";
};
};
usbstor@1 {
reg = <1>;
};
usbstor@3 {
reg = <3>;
};
};
};
usb_2: usb@2 {
compatible = "sandbox,usb";
status = "disabled";
};
spmi: spmi@0 {
compatible = "sandbox,spmi";
#address-cells = <0x1>;
#size-cells = <0x1>;
ranges;
pm8916@0 {
compatible = "qcom,spmi-pmic";
reg = <0x0 0x1>;
#address-cells = <0x1>;
#size-cells = <0x1>;
ranges;
spmi_gpios: gpios@c000 {
compatible = "qcom,pm8916-gpio";
reg = <0xc000 0x400>;
gpio-controller;
gpio-count = <4>;
#gpio-cells = <2>;
gpio-bank-name="spmi";
};
};
};
wdt0: wdt@0 {
compatible = "sandbox,wdt";
hw_margin_ms = <200>;
};
axi: axi@0 {
compatible = "sandbox,axi";
#address-cells = <0x1>;
#size-cells = <0x1>;
store@0 {
compatible = "sandbox,sandbox_store";
reg = <0x0 0x400>;
};
};
chosen {
#address-cells = <1>;
#size-cells = <1>;
setting = "sunrise ohoka";
other-node = "/some-bus/c-test@5";
int-values = <0x1937 72993>;
u-boot,acpi-ssdt-order = <&acpi_test2 &acpi_test1>;
chosen-test {
compatible = "denx,u-boot-fdt-test";
reg = <9 1>;
};
fwupd {
compatible = "simple-bus";
firmware0 {
compatible = "fwupd,vbe-simple";
storage = "mmc1";
area-start = <0x400>;
area-size = <0x1000>;
skip-offset = <0x200>;
state-offset = <0x400>;
state-size = <0x40>;
version-offset = <0x800>;
version-size = <0x100>;
};
};
};
translation-test@8000 {
compatible = "simple-bus";
reg = <0x8000 0x4000>;
#address-cells = <0x2>;
#size-cells = <0x1>;
ranges = <0 0x0 0x8000 0x1000
1 0x100 0x9000 0x1000
2 0x200 0xA000 0x1000
3 0x300 0xB000 0x1000
>;
dma-ranges = <0 0x000 0x10000000 0x1000
1 0x100 0x20000000 0x1000
>;
dev@0,0 {
compatible = "denx,u-boot-fdt-dummy";
reg = <0 0x0 0x1000>;
reg-names = "sandbox-dummy-0";
};
dev@1,100 {
compatible = "denx,u-boot-fdt-dummy";
reg = <1 0x100 0x1000>;
};
dev@2,200 {
compatible = "denx,u-boot-fdt-dummy";
reg = <2 0x200 0x1000>;
};
noxlatebus@3,300 {
compatible = "simple-bus";
reg = <3 0x300 0x1000>;
#address-cells = <0x1>;
#size-cells = <0x0>;
dev@42 {
compatible = "denx,u-boot-fdt-dummy";
reg = <0x42>;
};
};
};
osd {
compatible = "sandbox,sandbox_osd";
};
sandbox_tee {
compatible = "sandbox,tee";
};
sandbox_virtio1 {
compatible = "sandbox,virtio1";
};
sandbox_virtio2 {
compatible = "sandbox,virtio2";
};
sandbox_scmi {
compatible = "sandbox,scmi-devices";
clocks = <&clk_scmi 2>, <&clk_scmi 0>;
resets = <&reset_scmi 3>;
regul0-supply = <&regul0_scmi>;
regul1-supply = <&regul1_scmi>;
};
pinctrl {
compatible = "sandbox,pinctrl";
pinctrl-names = "default", "alternate";
pinctrl-0 = <&pinctrl_gpios>, <&pinctrl_i2s>;
pinctrl-1 = <&pinctrl_spi>, <&pinctrl_i2c>;
pinctrl_gpios: gpios {
gpio0 {
pins = "P5";
function = "GPIO";
bias-pull-up;
input-disable;
};
gpio1 {
pins = "P6";
function = "GPIO";
output-high;
drive-open-drain;
};
gpio2 {
pinmux = <SANDBOX_PINMUX(7, SANDBOX_PINMUX_GPIO)>;
bias-pull-down;
input-enable;
};
gpio3 {
pinmux = <SANDBOX_PINMUX(8, SANDBOX_PINMUX_GPIO)>;
bias-disable;
};
};
pinctrl_i2c: i2c {
groups {
groups = "I2C_UART";
function = "I2C";
};
pins {
pins = "P0", "P1";
drive-open-drain;
};
};
pinctrl_i2s: i2s {
groups = "SPI_I2S";
function = "I2S";
};
pinctrl_spi: spi {
groups = "SPI_I2S";
function = "SPI";
cs {
pinmux = <SANDBOX_PINMUX(5, SANDBOX_PINMUX_CS)>,
<SANDBOX_PINMUX(6, SANDBOX_PINMUX_CS)>;
};
};
};
pinctrl-single-no-width {
compatible = "pinctrl-single";
reg = <0x0000 0x238>;
#pinctrl-cells = <1>;
pinctrl-single,function-mask = <0x7f>;
};
pinctrl-single-pins {
compatible = "pinctrl-single";
reg = <0x0000 0x238>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0x7f>;
pinmux_pwm_pins: pinmux_pwm_pins {
pinctrl-single,pins = < 0x48 0x06 >;
};
pinmux_spi0_pins: pinmux_spi0_pins {
pinctrl-single,pins = <
0x190 0x0c
0x194 0x0c
0x198 0x23
0x19c 0x0c
>;
};
pinmux_uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
0x70 0x30
0x74 0x00
>;
};
};
pinctrl-single-bits {
compatible = "pinctrl-single";
reg = <0x0000 0x50>;
#pinctrl-cells = <2>;
pinctrl-single,bit-per-mux;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0xf>;
pinmux_i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,bits = <
0x10 0x00002200 0x0000ff00
>;
};
pinmux_lcd_pins: pinmux_lcd_pins {
pinctrl-single,bits = <
0x40 0x22222200 0xffffff00
0x44 0x22222222 0xffffffff
0x48 0x00000022 0x000000ff
0x48 0x02000000 0x0f000000
0x4c 0x02000022 0x0f0000ff
>;
};
};
hwspinlock@0 {
compatible = "sandbox,hwspinlock";
};
dma: dma {
compatible = "sandbox,dma";
#dma-cells = <1>;
dmas = <&dma 0>, <&dma 1>, <&dma 2>;
dma-names = "m2m", "tx0", "rx0";
};
/*
* keep mdio-mux ahead of mdio so that the mux is removed first at the
* end of the test. If parent mdio is removed first, clean-up of the
* mux will trigger a 2nd probe of parent-mdio, leaving parent-mdio
* active at the end of the test. That it turn doesn't allow the mdio
* class to be destroyed, triggering an error.
*/
mdio-mux-test {
compatible = "sandbox,mdio-mux";
#address-cells = <1>;
#size-cells = <0>;
mdio-parent-bus = <&mdio>;
mdio-ch-test@0 {
reg = <0>;
};
mdio-ch-test@1 {
reg = <1>;
};
};
mdio: mdio-test {
compatible = "sandbox,mdio";
#address-cells = <1>;
#size-cells = <0>;
ethphy1: ethernet-phy@1 {
reg = <1>;
};
};
pm-bus-test {
compatible = "simple-pm-bus";
clocks = <&clk_sandbox 4>;
power-domains = <&pwrdom 1>;
};
resetc2: syscon-reset {
compatible = "syscon-reset";
#reset-cells = <1>;
regmap = <&syscon0>;
offset = <1>;
mask = <0x27FFFFFF>;
assert-high = <0>;
};
syscon-reset-test {
compatible = "sandbox,misc_sandbox";
resets = <&resetc2 15>, <&resetc2 30>, <&resetc2 60>;
reset-names = "valid", "no_mask", "out_of_range";
};
sysinfo {
compatible = "sandbox,sysinfo-sandbox";
};
sysinfo-gpio {
compatible = "gpio-sysinfo";
gpios = <&gpio_a 15>, <&gpio_a 16>, <&gpio_a 17>;
revisions = <19>, <5>;
names = "rev_a", "foo";
};
some_regmapped-bus {
#address-cells = <0x1>;
#size-cells = <0x1>;
ranges = <0x0 0x0 0x10>;
compatible = "simple-bus";
regmap-test_0 {
reg = <0 0x10>;
compatible = "sandbox,regmap_test";
};
};
thermal {
compatible = "sandbox,thermal";
};
};
#include "sandbox_pmic.dtsi"
#include "cros-ec-keyboard.dtsi"