| /* |
| * (C) Copyright 2003 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * (C) Copyright 2004 |
| * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. |
| * |
| * (C) Copyright 2005-2007 |
| * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <mpc5xxx.h> |
| #include <malloc.h> |
| #include <pci.h> |
| #include <i2c.h> |
| #include <fpga.h> |
| #include <environment.h> |
| #include <fdt_support.h> |
| #include <netdev.h> |
| #include <asm/io.h> |
| #include "fpga.h" |
| #include "mvbc_p.h" |
| #include "../common/mv_common.h" |
| |
| #define SDRAM_MODE 0x00CD0000 |
| #define SDRAM_CONTROL 0x504F0000 |
| #define SDRAM_CONFIG1 0xD2322800 |
| #define SDRAM_CONFIG2 0x8AD70000 |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static void sdram_start (int hi_addr) |
| { |
| long hi_bit = hi_addr ? 0x01000000 : 0; |
| |
| /* unlock mode register */ |
| out_be32((u32*)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | 0x80000000 | hi_bit); |
| |
| /* precharge all banks */ |
| out_be32((u32*)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | 0x80000002 | hi_bit); |
| |
| /* precharge all banks */ |
| out_be32((u32*)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | 0x80000002 | hi_bit); |
| |
| /* auto refresh */ |
| out_be32((u32*)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | 0x80000004 | hi_bit); |
| |
| /* set mode register */ |
| out_be32((u32*)MPC5XXX_SDRAM_MODE, SDRAM_MODE); |
| |
| /* normal operation */ |
| out_be32((u32*)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | hi_bit); |
| } |
| |
| phys_addr_t initdram (int board_type) |
| { |
| ulong dramsize = 0; |
| ulong test1, |
| test2; |
| |
| /* setup SDRAM chip selects */ |
| out_be32((u32*)MPC5XXX_SDRAM_CS0CFG, 0x0000001e); |
| |
| /* setup config registers */ |
| out_be32((u32*)MPC5XXX_SDRAM_CONFIG1, SDRAM_CONFIG1); |
| out_be32((u32*)MPC5XXX_SDRAM_CONFIG2, SDRAM_CONFIG2); |
| |
| /* find RAM size using SDRAM CS0 only */ |
| sdram_start(0); |
| test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); |
| sdram_start(1); |
| test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); |
| if (test1 > test2) { |
| sdram_start(0); |
| dramsize = test1; |
| } else |
| dramsize = test2; |
| |
| if (dramsize < (1 << 20)) |
| dramsize = 0; |
| |
| if (dramsize > 0) |
| out_be32((u32*)MPC5XXX_SDRAM_CS0CFG, 0x13 + |
| __builtin_ffs(dramsize >> 20) - 1); |
| else |
| out_be32((u32*)MPC5XXX_SDRAM_CS0CFG, 0); |
| |
| return dramsize; |
| } |
| |
| void mvbc_init_gpio(void) |
| { |
| struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO; |
| |
| printf("Ports : 0x%08x\n", gpio->port_config); |
| printf("PORCFG: 0x%08lx\n", *(vu_long*)MPC5XXX_CDM_PORCFG); |
| |
| out_be32(&gpio->simple_ddr, SIMPLE_DDR); |
| out_be32(&gpio->simple_dvo, SIMPLE_DVO); |
| out_be32(&gpio->simple_ode, SIMPLE_ODE); |
| out_be32(&gpio->simple_gpioe, SIMPLE_GPIOEN); |
| |
| out_8(&gpio->sint_ode, SINT_ODE); |
| out_8(&gpio->sint_ddr, SINT_DDR); |
| out_8(&gpio->sint_dvo, SINT_DVO); |
| out_8(&gpio->sint_inten, SINT_INTEN); |
| out_be16(&gpio->sint_itype, SINT_ITYPE); |
| out_8(&gpio->sint_gpioe, SINT_GPIOEN); |
| |
| out_8((u8*)MPC5XXX_WU_GPIO_ODE, WKUP_ODE); |
| out_8((u8*)MPC5XXX_WU_GPIO_DIR, WKUP_DIR); |
| out_8((u8*)MPC5XXX_WU_GPIO_DATA_O, WKUP_DO); |
| out_8((u8*)MPC5XXX_WU_GPIO_ENABLE, WKUP_EN); |
| |
| printf("simple_gpioe: 0x%08x\n", gpio->simple_gpioe); |
| printf("sint_gpioe : 0x%08x\n", gpio->sint_gpioe); |
| } |
| |
| int misc_init_r(void) |
| { |
| char *s = getenv("reset_env"); |
| |
| if (!s) { |
| if (in_8((u8*)MPC5XXX_WU_GPIO_DATA_I) & MPC5XXX_GPIO_WKUP_6) |
| return 0; |
| udelay(50000); |
| if (in_8((u8*)MPC5XXX_WU_GPIO_DATA_I) & MPC5XXX_GPIO_WKUP_6) |
| return 0; |
| udelay(50000); |
| if (in_8((u8*)MPC5XXX_WU_GPIO_DATA_I) & MPC5XXX_GPIO_WKUP_6) |
| return 0; |
| } |
| printf(" === FACTORY RESET ===\n"); |
| mv_reset_environment(); |
| saveenv(); |
| |
| return -1; |
| } |
| |
| int checkboard(void) |
| { |
| mvbc_init_gpio(); |
| printf("Board: Matrix Vision mvBlueCOUGAR-P\n"); |
| |
| return 0; |
| } |
| |
| void flash_preinit(void) |
| { |
| /* |
| * Now, when we are in RAM, enable flash write |
| * access for detection process. |
| * Note that CS_BOOT cannot be cleared when |
| * executing in flash. |
| */ |
| clrbits_be32((u32*)MPC5XXX_BOOTCS_CFG, 0x1); |
| } |
| |
| void flash_afterinit(ulong size) |
| { |
| out_be32((u32*)MPC5XXX_BOOTCS_START, START_REG(CONFIG_SYS_BOOTCS_START | |
| size)); |
| out_be32((u32*)MPC5XXX_CS0_START, START_REG(CONFIG_SYS_BOOTCS_START | |
| size)); |
| out_be32((u32*)MPC5XXX_BOOTCS_STOP, STOP_REG(CONFIG_SYS_BOOTCS_START | size, |
| size)); |
| out_be32((u32*)MPC5XXX_CS0_STOP, STOP_REG(CONFIG_SYS_BOOTCS_START | size, |
| size)); |
| } |
| |
| void pci_mvbc_fixup_irq(struct pci_controller *hose, pci_dev_t dev) |
| { |
| unsigned char line = 0xff; |
| char *s = getenv("pci_latency"); |
| u32 base; |
| u8 val = 0; |
| |
| if (s) |
| val = simple_strtoul(s, NULL, 16); |
| |
| if (PCI_BUS(dev) == 0) { |
| switch (PCI_DEV (dev)) { |
| case 0xa: /* FPGA */ |
| line = 3; |
| pci_hose_read_config_dword(hose, dev, PCI_BASE_ADDRESS_0, &base); |
| printf("found FPGA - enable arbitration\n"); |
| writel(0x03, (u32*)(base + 0x80c0)); |
| writel(0xf0, (u32*)(base + 0x8080)); |
| if (val) |
| pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, val); |
| break; |
| case 0xb: /* LAN */ |
| line = 2; |
| if (val) |
| pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, val); |
| break; |
| case 0x1a: |
| break; |
| default: |
| printf ("***pci_scan: illegal dev = 0x%08x\n", PCI_DEV (dev)); |
| break; |
| } |
| pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, line); |
| } |
| } |
| |
| struct pci_controller hose = { |
| fixup_irq:pci_mvbc_fixup_irq |
| }; |
| |
| extern void pci_mpc5xxx_init(struct pci_controller *); |
| |
| void pci_init_board(void) |
| { |
| mvbc_p_init_fpga(); |
| mv_load_fpga(); |
| pci_mpc5xxx_init(&hose); |
| } |
| |
| void show_boot_progress(int val) |
| { |
| struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO; |
| |
| switch(val) { |
| case 0: /* FPGA ok */ |
| setbits_be32(&gpio->simple_dvo, LED_G0); |
| break; |
| case 65: |
| setbits_be32(&gpio->simple_dvo, LED_G1); |
| break; |
| case 12: |
| setbits_be32(&gpio->simple_dvo, LED_Y); |
| break; |
| case 15: |
| setbits_be32(&gpio->simple_dvo, LED_R); |
| break; |
| default: |
| break; |
| } |
| |
| } |
| |
| void ft_board_setup(void *blob, bd_t *bd) |
| { |
| ft_cpu_setup(blob, bd); |
| fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); |
| } |
| |
| int board_eth_init(bd_t *bis) |
| { |
| cpu_eth_init(bis); /* Built in FEC comes first */ |
| return pci_eth_init(bis); |
| } |