Maxim DS2502 driver device binding - one wire protocol add only memory from Maxim | |
======================= | |
This memory needs to be connected to a onewire bus, as a child node. | |
The bus will read the device serial number and match this node with a found | |
device on the bus | |
Also check doc/device-tree-bindings/w1 for onewire bus drivers | |
Driver: | |
- drivers/w1-eeprom/ds2502.c | |
Ds2502 device-tree node properties: | |
Required: | |
* compatible = "maxim,ds2502" | |
Optional: | |
* none | |
Example: | |
eeprom1: eeprom@0 { | |
compatible = "maxim,ds2502"; | |
}; | |
Example with parent bus: | |
onewire { | |
compatible = "fsl,imx53-owire"; | |
reg = <0x63fa4000 0x4000>; | |
eeprom1: eeprom@0 { | |
compatible = "maxim,ds2502"; | |
}; | |
}; |