| /* |
| * (C) Copyright 2010 |
| * Matthias Weisser <weisserm@arcor.de> |
| * |
| * Configuation settings for the jadecpu board |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #define CONFIG_MB86R0x |
| #define CONFIG_MB86R0x_IOCLK get_bus_freq(0) |
| #define CONFIG_SYS_HZ 1000 |
| |
| #define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ |
| #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ |
| |
| /* |
| * Environment settings |
| */ |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "gs_fast_boot=setenv bootdelay 5\0" \ |
| "gs_slow_boot=setenv bootdelay 10\0" \ |
| "bootcmd=mw.l 0x40000000 0 1024; usb start;" \ |
| "fatls usb 0; fatload usb 0 0x40000000 jadecpu-init.bin;" \ |
| "bootelf 0x40000000\0" \ |
| "" |
| |
| #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ |
| #define CONFIG_SETUP_MEMORY_TAGS 1 |
| #define CONFIG_INITRD_TAG 1 |
| #define BOARD_LATE_INIT 1 |
| |
| /* |
| * Compressions |
| */ |
| #define CONFIG_LZO |
| |
| /* |
| * Hardware drivers |
| */ |
| |
| /* |
| * Serial |
| */ |
| #define CONFIG_SERIAL_MULTI |
| #define CONFIG_SYS_NS16550 |
| #define CONFIG_SYS_NS16550_SERIAL |
| #define CONFIG_SYS_NS16550_REG_SIZE (-4) |
| #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) |
| #define CONFIG_SYS_NS16550_COM1 0xfffe1000 /* UART 0 */ |
| #define CONFIG_SYS_NS16550_COM2 0xfff50000 /* UART 2 */ |
| #define CONFIG_SYS_NS16550_COM3 0xfff51000 /* UART 3 */ |
| #define CONFIG_SYS_NS16550_COM4 0xfff43000 /* UART 4 */ |
| |
| #define CONFIG_CONS_INDEX 4 |
| |
| /* |
| * Ethernet |
| */ |
| #define CONFIG_NET_MULTI |
| #define CONFIG_SMC911X |
| #define CONFIG_SMC911X_BASE 0x02000000 |
| #define CONFIG_SMC911X_16_BIT |
| |
| /* |
| * Video |
| */ |
| #define CONFIG_VIDEO |
| #define CONFIG_VIDEO_MB86R0xGDC |
| #define CONFIG_SYS_WHITE_ON_BLACK |
| #define CONFIG_CFB_CONSOLE |
| #define CONFIG_SYS_CONSOLE_IS_IN_ENV |
| #define CONFIG_SYS_CONSOLE_ENV_OVERWRITE |
| #define CONFIG_VIDEO_LOGO |
| #define CONFIG_SPLASH_SCREEN |
| #define CONFIG_SPLASH_SCREEN_ALIGN |
| #define CONFIG_VIDEO_BMP_LOGO |
| #define CONFIG_VIDEO_BMP_GZIP |
| #define CONFIG_VIDEO_BMP_RLE8 |
| #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (800*480 + 256*4 + 10*1024) |
| #define VIDEO_FB_16BPP_WORD_SWAP |
| #define VIDEO_KBD_INIT_FCT 0 |
| #define VIDEO_TSTC_FCT serial_tstc |
| #define VIDEO_GETC_FCT serial_getc |
| |
| /* |
| * BOOTP options |
| */ |
| #define CONFIG_BOOTP_BOOTFILESIZE 1 |
| #define CONFIG_BOOTP_BOOTPATH 1 |
| #define CONFIG_BOOTP_GATEWAY 1 |
| #define CONFIG_BOOTP_HOSTNAME 1 |
| |
| /* |
| * Command line configuration. |
| */ |
| #include <config_cmd_default.h> |
| #undef CONFIG_CMD_BDI |
| #undef CONFIG_CMD_FPGA |
| #undef CONFIG_CMD_IMLS |
| #undef CONFIG_CMD_LOADS |
| #undef CONFIG_CMD_SOURCE |
| #undef CONFIG_CMD_NFS |
| #undef CONFIG_CMD_XIMG |
| |
| #define CONFIG_CMD_BMP 1 |
| #define CONFIG_CMD_CAN 1 |
| #define CONFIG_CMD_DHCP 1 |
| #define CONFIG_CMD_ELF 1 |
| #define CONFIG_CMD_FAT 1 |
| #define CONFIG_CMD_PING 1 |
| #define CONFIG_CMD_USB 1 |
| |
| #define CONFIG_SYS_HUSH_PARSER |
| #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " |
| |
| /* USB */ |
| #define CONFIG_USB_OHCI_NEW |
| #define CONFIG_SYS_USB_OHCI_REGS_BASE 0xFFF81000 |
| #define CONFIG_SYS_USB_OHCI_SLOT_NAME "mb86r0x" |
| #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 |
| #define CONFIG_USB_STORAGE |
| #define CONFIG_DOS_PARTITION |
| |
| /* SDRAM */ |
| #define CONFIG_NR_DRAM_BANKS 1 |
| #define PHYS_SDRAM 0x40000000 /* Start address of DDRRAM */ |
| #define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ |
| |
| /* |
| * FLASH and environment organization |
| */ |
| #define CONFIG_SYS_FLASH_BASE 0x10000000 |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 |
| #define CONFIG_SYS_MAX_FLASH_SECT 256 |
| #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE |
| |
| #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00040000) |
| #define CONFIG_ENV_IS_IN_FLASH 1 |
| #define CONFIG_ENV_SECT_SIZE (128 * 1024) |
| #define CONFIG_ENV_SIZE (128 * 1024) |
| |
| /* |
| * CFI FLASH driver setup |
| */ |
| #define CONFIG_SYS_FLASH_CFI 1 |
| #define CONFIG_FLASH_CFI_DRIVER 1 |
| #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* ~10x faster */ |
| |
| #define CONFIG_SYS_LOAD_ADDR 0x40000000 /* load address */ |
| |
| #define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM + (512*1024)) |
| #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM + PHYS_SDRAM_SIZE) |
| |
| #define CONFIG_BAUDRATE 115200 |
| #define CONFIG_SYS_BAUDRATE_TABLE {115200, 19200, 38400, 57600, 9600 } |
| |
| #define CONFIG_SYS_PROMPT "jade> " |
| #define CONFIG_SYS_CBSIZE 256 |
| #define CONFIG_SYS_MAXARGS 16 |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ |
| sizeof(CONFIG_SYS_PROMPT) + 16) |
| #define CONFIG_SYS_LONGHELP 1 |
| #define CONFIG_CMDLINE_EDITING 1 |
| |
| #define CONFIG_PREBOOT "" |
| |
| #define CONFIG_BOOTDELAY 5 |
| #define CONFIG_AUTOBOOT_KEYED |
| #define CONFIG_AUTOBOOT_PROMPT "boot in %d s\n", bootdelay |
| #define CONFIG_AUTOBOOT_DELAY_STR "delaygs" |
| #define CONFIG_AUTOBOOT_STOP_STR "stopgs" |
| |
| /* |
| * Size of malloc() pool |
| */ |
| #define CONFIG_SYS_MALLOC_LEN (0x400000 - 0x8000) |
| #define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ |
| |
| #define CONFIG_STACKSIZE (32*1024) /* regular stack */ |
| |
| /* |
| * Clock reset generator init |
| */ |
| #define CONFIG_SYS_CRG_CRHA_INIT 0xffff |
| #define CONFIG_SYS_CRG_CRPA_INIT 0xffff |
| #define CONFIG_SYS_CRG_CRPB_INIT 0xfffe |
| #define CONFIG_SYS_CRG_CRHB_INIT 0xffff |
| #define CONFIG_SYS_CRG_CRAM_INIT 0xffef |
| |
| /* |
| * Memory controller settings |
| */ |
| #define CONFIG_SYS_MEMC_MCFMODE0_INIT 0x00000001 /* 16bit */ |
| #define CONFIG_SYS_MEMC_MCFMODE2_INIT 0x00000001 /* 16bit */ |
| #define CONFIG_SYS_MEMC_MCFMODE4_INIT 0x00000021 /* 16bit, Page*/ |
| #define CONFIG_SYS_MEMC_MCFTIM0_INIT 0x16191008 |
| #define CONFIG_SYS_MEMC_MCFTIM2_INIT 0x03061008 |
| #define CONFIG_SYS_MEMC_MCFTIM4_INIT 0x03061804 |
| #define CONFIG_SYS_MEMC_MCFAREA0_INIT 0x000000c0 /* 0x0c000000 1MB */ |
| #define CONFIG_SYS_MEMC_MCFAREA2_INIT 0x00000020 /* 0x02000000 1MB */ |
| #define CONFIG_SYS_MEMC_MCFAREA4_INIT 0x001f0000 /* 0x10000000 32 MB */ |
| |
| /* |
| * DDR2 controller init settings |
| */ |
| #define CONFIG_SYS_DDR2_DRIMS_INIT 0x5555 |
| #define CONFIG_SYS_CCNT_CDCRC_INIT_1 0x00000002 |
| #define CONFIG_SYS_CCNT_CDCRC_INIT_2 0x00000003 |
| #define CONFIG_SYS_DDR2_DRIC1_INIT 0x003f |
| #define CONFIG_SYS_DDR2_DRIC2_INIT 0x0000 |
| #define CONFIG_SYS_DDR2_DRCA_INIT 0xc124 /* 512Mbit DDR2SDRAM x 2 */ |
| #define CONFIG_SYS_DDR2_DRCM_INIT 0x0032 |
| #define CONFIG_SYS_DDR2_DRCST1_INIT 0x3418 |
| #define CONFIG_SYS_DDR2_DRCST2_INIT 0x6e32 |
| #define CONFIG_SYS_DDR2_DRCR_INIT 0x0141 |
| #define CONFIG_SYS_DDR2_DRCF_INIT 0x0002 |
| #define CONFIG_SYS_DDR2_DRASR_INIT 0x0001 |
| #define CONFIG_SYS_DDR2_DROBS_INIT 0x0001 |
| #define CONFIG_SYS_DDR2_DROABA_INIT 0x0103 |
| #define CONFIG_SYS_DDR2_DRIBSODT1_INIT 0x003F |
| #define CONFIG_SYS_DDR2_DROS_INIT 0x0001 |
| |
| /* |
| * DRAM init sequence |
| */ |
| |
| /* PALL Command */ |
| #define CONFIG_SYS_DDR2_INIT_DRIC1_1 0x0017 |
| #define CONFIG_SYS_DDR2_INIT_DRIC2_1 0x0400 |
| |
| /* EMR(2) command */ |
| #define CONFIG_SYS_DDR2_INIT_DRIC1_2 0x0006 |
| #define CONFIG_SYS_DDR2_INIT_DRIC2_2 0x0000 |
| |
| /* EMR(3) command */ |
| #define CONFIG_SYS_DDR2_INIT_DRIC1_3 0x0007 |
| #define CONFIG_SYS_DDR2_INIT_DRIC2_3 0x0000 |
| |
| /* EMR(1) command */ |
| #define CONFIG_SYS_DDR2_INIT_DRIC1_4 0x0005 |
| #define CONFIG_SYS_DDR2_INIT_DRIC2_4 0x0000 |
| |
| /* MRS command */ |
| #define CONFIG_SYS_DDR2_INIT_DRIC1_5 0x0004 |
| #define CONFIG_SYS_DDR2_INIT_DRIC2_5 0x0532 |
| |
| /* PALL command */ |
| #define CONFIG_SYS_DDR2_INIT_DRIC1_6 0x0017 |
| #define CONFIG_SYS_DDR2_INIT_DRIC2_6 0x0400 |
| |
| /* REF command 1 */ |
| #define CONFIG_SYS_DDR2_INIT_DRIC1_7 0x000f |
| #define CONFIG_SYS_DDR2_INIT_DRIC2_7 0x0000 |
| |
| /* MRS command */ |
| #define CONFIG_SYS_DDR2_INIT_DRIC1_8 0x0004 |
| #define CONFIG_SYS_DDR2_INIT_DRIC2_8 0x0432 |
| |
| /* EMR(1) command */ |
| #define CONFIG_SYS_DDR2_INIT_DRIC1_9 0x0005 |
| #define CONFIG_SYS_DDR2_INIT_DRIC2_9 0x0380 |
| |
| /* EMR(1) command */ |
| #define CONFIG_SYS_DDR2_INIT_DRIC1_10 0x0005 |
| #define CONFIG_SYS_DDR2_INIT_DRIC2_10 0x0002 |
| |
| #ifdef CONFIG_USE_IRQ |
| #error CONFIG_USE_IRQ not supported |
| #endif |
| |
| #endif /* __CONFIG_H */ |