arch/arm/mach-imx/Makefile - filogic/uboot - Gitiles

 # SPDX-License-Identifier: GPL-2.0+
 #
 # (C) Copyright 2000-2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # (C) Copyright 2011 Freescale Semiconductor, Inc.

 ifeq ($(SOC),$(filter $(SOC),mx25 mx35 mx5 mx6 mx7 imx8m vf610))
 obj-y	= iomux-v3.o
 endif

 ifeq ($(SOC),$(filter $(SOC),imx8m))
 ifneq ($(CONFIG_SPL_BUILD),y)
 obj-$(CONFIG_IMX_BOOTAUX) += imx_bootaux.o
 endif
 obj-$(CONFIG_ENV_IS_IN_MMC) += mmc_env.o
 obj-$(CONFIG_FEC_MXC) += mac.o
 obj-$(CONFIG_DWC_ETH_QOS) += mac.o
 obj-$(CONFIG_SYS_I2C_MXC) += i2c-mxv7.o
 obj-$(CONFIG_IMX_HAB) += hab.o
 obj-y += cpu.o
 endif

 ifeq ($(SOC),$(filter $(SOC),mx5 mx6))
 obj-y	+= cpu.o speed.o
 ifneq ($(CONFIG_MX51),y)
 obj-y	+= mmdc_size.o
 endif
 obj-$(CONFIG_GPT_TIMER) += timer.o
 obj-$(CONFIG_SYS_I2C_MXC) += i2c-mxv7.o
 endif
 ifeq ($(SOC),$(filter $(SOC),mx7 mx6 mxs imx8m imx8 imxrt))
 obj-y	+= misc.o
 obj-$(CONFIG_CMD_PRIBLOB) += priblob.o
 obj-$(CONFIG_SPL_BUILD)	+= spl.o
 endif
 ifeq ($(SOC),$(filter $(SOC),mx7))
 obj-y	+= cpu.o
 obj-$(CONFIG_SYS_I2C_MXC) += i2c-mxv7.o
 obj-$(CONFIG_ENV_IS_IN_MMC) += mmc_env.o
 endif
 ifeq ($(SOC),$(filter $(SOC),mx7 imx8m))
 ifneq ($(CONFIG_SPL_BUILD),y)
 obj-$(CONFIG_FSL_MFGPROT) += cmd_mfgprot.o
 endif
 endif
 ifeq ($(SOC),$(filter $(SOC),mx5 mx6 mx7))
 obj-$(CONFIG_IMX_VIDEO_SKIP) += video.o
 endif
 ifeq ($(SOC),$(filter $(SOC),mx6 mx7))
 obj-y	+= cache.o init.o
 obj-$(CONFIG_FEC_MXC) += mac.o
 obj-$(CONFIG_IMX_RDC) += rdc-sema.o
 ifneq ($(CONFIG_SPL_BUILD),y)
 obj-$(CONFIG_IMX_BOOTAUX) += imx_bootaux.o
 endif
 obj-$(CONFIG_SATA) += sata.o
 obj-$(CONFIG_IMX_HAB)    += hab.o
 obj-$(CONFIG_SYSCOUNTER_TIMER) += syscounter.o
 endif
 ifeq ($(SOC),$(filter $(SOC),mx7ulp))
 obj-y  += cache.o mmdc_size.o
 obj-$(CONFIG_IMX_HAB) += hab.o
 endif
 ifeq ($(SOC),$(filter $(SOC),vf610))
 obj-y += ddrmc-vf610.o
 obj-$(CONFIG_DDRMC_VF610_CALIBRATION) += ddrmc-vf610-calibration.o
 endif
 ifneq ($(CONFIG_SPL_BUILD),y)
 obj-$(CONFIG_CMD_BMODE) += cmd_bmode.o
 obj-$(CONFIG_CMD_HDMIDETECT) += cmd_hdmidet.o
 obj-$(CONFIG_CMD_DEKBLOB) += cmd_dek.o
 obj-$(CONFIG_CMD_NANDBCB) += cmd_nandbcb.o
 endif

 ifeq ($(CONFIG_SPL_BUILD),y)
 obj-$(CONFIG_SPL_LOAD_IMX_CONTAINER) += image-container.o parse-container.o
 endif

 PLUGIN = board/$(BOARDDIR)/plugin

 ifeq ($(CONFIG_USE_IMXIMG_PLUGIN),y)

 $(PLUGIN).o: $(PLUGIN).S FORCE
 	$(Q)mkdir -p $(dir $@)
 	$(call if_changed_dep,as_o_S)

 $(PLUGIN).bin: $(PLUGIN).o FORCE
 	$(Q)mkdir -p $(dir $@)
 	$(OBJCOPY) -O binary --gap-fill 0xff $< $@
 else

 $(PLUGIN).bin:

 endif

 quiet_cmd_cpp_cfg = CFGS    $@
       cmd_cpp_cfg = $(CPP) $(cpp_flags) -D__ASSEMBLY__ -x c -o $@ $<

 # mkimage source config file
 IMX_CONFIG = $(CONFIG_IMX_CONFIG:"%"=%)

 # How to create a cpp processed config file, they all use the same source
 %.cfgout: $(IMX_CONFIG) FORCE
 	$(Q)mkdir -p $(dir $@)
 	$(call if_changed_dep,cpp_cfg)

 IMX_CONTAINER_CFG = $(CONFIG_IMX_CONTAINER_CFG:"%"=%)
 container.cfg: $(IMX_CONTAINER_CFG) FORCE
 	$(Q)mkdir -p $(dir $@)
 	$(call if_changed_dep,cpp_cfg)

 ifeq ($(CONFIG_ARCH_IMX8), y)
 CNTR_DEPFILES := $(srctree)/tools/imx_cntr_image.sh
 IMAGE_TYPE := imx8image
 ifeq ($(CONFIG_SPL_BUILD),y)
 SPL_DEPFILE_EXISTS := $(shell $(CPP) $(cpp_flags) -x c -o spl/u-boot-spl.cfgout $(srctree)/$(IMX_CONFIG); if [ -f spl/u-boot-spl.cfgout ]; then $(CNTR_DEPFILES) spl/u-boot-spl.cfgout; echo $$?; fi)
 endif
 DEPFILE_EXISTS := $(shell $(CPP) $(cpp_flags) -x c -o u-boot-dtb.cfgout $(srctree)/$(IMX_CONFIG); if [ -f u-boot-dtb.cfgout ]; then $(CNTR_DEPFILES) u-boot-dtb.cfgout; echo $$?; fi)
 else ifeq ($(CONFIG_ARCH_IMX8M), y)
 IMAGE_TYPE := imx8mimage
 DEPFILE_EXISTS := 0
 else
 IMAGE_TYPE := imximage
 DEPFILE_EXISTS := 0
 endif

 MKIMAGEFLAGS_u-boot.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \
 	-T $(IMAGE_TYPE) -e $(CONFIG_SYS_TEXT_BASE)
 u-boot.imx: MKIMAGEOUTPUT = u-boot.imx.log

 u-boot.imx: u-boot.bin u-boot.cfgout $(PLUGIN).bin FORCE
 	$(call if_changed,mkimage)

 ifeq ($(CONFIG_MULTI_DTB_FIT),y)
 MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \
 	-T $(IMAGE_TYPE) -e $(CONFIG_SYS_TEXT_BASE)
 u-boot-dtb.imx: MKIMAGEOUTPUT = u-boot-dtb.imx.log

 u-boot-dtb.imx: u-boot-fit-dtb.bin u-boot-dtb.cfgout $(PLUGIN).bin FORCE
 ifeq ($(DEPFILE_EXISTS),0)
 	$(call if_changed,mkimage)
 endif
 else ifeq ($(CONFIG_OF_SEPARATE),y)
 MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \
 	-T $(IMAGE_TYPE) -e $(CONFIG_SYS_TEXT_BASE)
 u-boot-dtb.imx: MKIMAGEOUTPUT = u-boot-dtb.imx.log

 u-boot-dtb.imx: u-boot-dtb.bin u-boot-dtb.cfgout $(PLUGIN).bin FORCE
 ifeq ($(DEPFILE_EXISTS),0)
 	$(call if_changed,mkimage)
 endif
 endif

 ifdef CONFIG_ARM64
 ifeq ($(CONFIG_ARCH_IMX8M), y)

 SPL: spl/u-boot-spl.bin spl/u-boot-spl.cfgout FORCE

 MKIMAGEFLAGS_flash.bin = -n spl/u-boot-spl.cfgout \
 		   -T $(IMAGE_TYPE) -e $(CONFIG_SPL_TEXT_BASE)
 flash.bin: MKIMAGEOUTPUT = flash.log

 spl/u-boot-spl.cfgout: $(IMX_CONFIG) FORCE
 	$(Q)mkdir -p $(dir $@)
 	$(call if_changed_dep,cpp_cfg)

 spl/u-boot-spl-ddr.bin: spl/u-boot-spl.bin spl/u-boot-spl.cfgout FORCE

 flash.bin: spl/u-boot-spl-ddr.bin u-boot.itb FORCE
 	$(call if_changed,mkimage)
 endif

 ifeq ($(CONFIG_ARCH_IMX8), y)
 SPL:

 MKIMAGEFLAGS_flash.bin = -n spl/u-boot-spl.cfgout -T $(IMAGE_TYPE) -e 0x100000
 flash.bin: MKIMAGEOUTPUT = flash.log

 MKIMAGEFLAGS_u-boot.cnt = -n container.cfg -T $(IMAGE_TYPE) -e 0x100000
 u-boot.cnt: MKIMAGEOUTPUT = u-boot.cnt.log

 ifeq ($(CONFIG_SPL_LOAD_IMX_CONTAINER), y)
 u-boot.cnt: u-boot.bin container.cfg FORCE
 	$(call if_changed,mkimage)
 flash.bin: spl/u-boot-spl.bin FORCE
 	$(call if_changed,mkimage)
 	@flashbin_size=`wc -c flash.bin | awk '{print $$1}'`; \
                    pad_cnt=$$(((flashbin_size + 0x400 - 1) / 0x400)); \
                    echo "append u-boot.cnt at $$pad_cnt KB"; \
                    dd if=u-boot.cnt of=flash.bin bs=1K seek=$$pad_cnt;
 else
 flash.bin: spl/u-boot-spl.bin FORCE
 	$(call if_changed,mkimage)
 endif
 endif

 else
 MKIMAGEFLAGS_SPL = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \
 		   -T $(IMAGE_TYPE) -e $(CONFIG_SPL_TEXT_BASE)
 SPL: MKIMAGEOUTPUT = SPL.log

 SPL: spl/u-boot-spl.bin spl/u-boot-spl.cfgout $(PLUGIN).bin FORCE
 	$(call if_changed,mkimage)

 MKIMAGEFLAGS_u-boot.uim = -A arm -O U-Boot -a $(CONFIG_SYS_TEXT_BASE) \
 		-e $(CONFIG_SYS_TEXT_BASE) -C none -T firmware

 u-boot.uim: u-boot.bin FORCE
 	$(call if_changed,mkimage)

 OBJCOPYFLAGS += -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
 append = cat $(filter-out $< $(PHONY), $^) >> $@

 quiet_cmd_pad_cat = CAT     $@
 cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@

 u-boot-with-spl.imx: SPL $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE
 	$(call if_changed,pad_cat)

 u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE
 	$(call if_changed,pad_cat)

 quiet_cmd_u-boot-nand-spl_imx = GEN     $@
 cmd_u-boot-nand-spl_imx = (printf '\000\000\000\000\106\103\102\040\001' && \
 	dd bs=1015 count=1 if=/dev/zero 2>/dev/null) | cat - $< > $@

 spl/u-boot-nand-spl.imx: SPL FORCE
 	$(call if_changed,u-boot-nand-spl_imx)
 endif

 targets += $(addprefix ../../../,SPL spl/u-boot-spl.cfgout u-boot-dtb.cfgout u-boot.cfgout u-boot.uim spl/u-boot-nand-spl.imx)

 obj-$(CONFIG_ARM64) += lowlevel.o

 obj-$(CONFIG_MX5) += mx5/
 obj-$(CONFIG_MX6) += mx6/
 obj-$(CONFIG_MX7) += mx7/
 obj-$(CONFIG_ARCH_MX7ULP) += mx7ulp/
 obj-$(CONFIG_ARCH_IMX8ULP) += imx8ulp/
 obj-$(CONFIG_IMX8M) += imx8m/
 obj-$(CONFIG_ARCH_IMX8) += imx8/
 obj-$(CONFIG_ARCH_IMXRT) += imxrt/

 obj-$(CONFIG_SPL_BOOTROM_SUPPORT) += spl_imx_romapi.o
 obj-$(CONFIG_IMX8_ROMAPI) += romapi.o
	# SPDX-License-Identifier: GPL-2.0+
	#
	# (C) Copyright 2000-2006
	# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	#
	# (C) Copyright 2011 Freescale Semiconductor, Inc.

	ifeq ($(SOC),$(filter $(SOC),mx25 mx35 mx5 mx6 mx7 imx8m vf610))
	obj-y = iomux-v3.o
	endif

	ifeq ($(SOC),$(filter $(SOC),imx8m))
	ifneq ($(CONFIG_SPL_BUILD),y)
	obj-$(CONFIG_IMX_BOOTAUX) += imx_bootaux.o
	endif
	obj-$(CONFIG_ENV_IS_IN_MMC) += mmc_env.o
	obj-$(CONFIG_FEC_MXC) += mac.o
	obj-$(CONFIG_DWC_ETH_QOS) += mac.o
	obj-$(CONFIG_SYS_I2C_MXC) += i2c-mxv7.o
	obj-$(CONFIG_IMX_HAB) += hab.o
	obj-y += cpu.o
	endif

	ifeq ($(SOC),$(filter $(SOC),mx5 mx6))
	obj-y += cpu.o speed.o
	ifneq ($(CONFIG_MX51),y)
	obj-y += mmdc_size.o
	endif
	obj-$(CONFIG_GPT_TIMER) += timer.o
	obj-$(CONFIG_SYS_I2C_MXC) += i2c-mxv7.o
	endif
	ifeq ($(SOC),$(filter $(SOC),mx7 mx6 mxs imx8m imx8 imxrt))
	obj-y += misc.o
	obj-$(CONFIG_CMD_PRIBLOB) += priblob.o
	obj-$(CONFIG_SPL_BUILD) += spl.o
	endif
	ifeq ($(SOC),$(filter $(SOC),mx7))
	obj-y += cpu.o
	obj-$(CONFIG_SYS_I2C_MXC) += i2c-mxv7.o
	obj-$(CONFIG_ENV_IS_IN_MMC) += mmc_env.o
	endif
	ifeq ($(SOC),$(filter $(SOC),mx7 imx8m))
	ifneq ($(CONFIG_SPL_BUILD),y)
	obj-$(CONFIG_FSL_MFGPROT) += cmd_mfgprot.o
	endif
	endif
	ifeq ($(SOC),$(filter $(SOC),mx5 mx6 mx7))
	obj-$(CONFIG_IMX_VIDEO_SKIP) += video.o
	endif
	ifeq ($(SOC),$(filter $(SOC),mx6 mx7))
	obj-y += cache.o init.o
	obj-$(CONFIG_FEC_MXC) += mac.o
	obj-$(CONFIG_IMX_RDC) += rdc-sema.o
	ifneq ($(CONFIG_SPL_BUILD),y)
	obj-$(CONFIG_IMX_BOOTAUX) += imx_bootaux.o
	endif
	obj-$(CONFIG_SATA) += sata.o
	obj-$(CONFIG_IMX_HAB) += hab.o
	obj-$(CONFIG_SYSCOUNTER_TIMER) += syscounter.o
	endif
	ifeq ($(SOC),$(filter $(SOC),mx7ulp))
	obj-y += cache.o mmdc_size.o
	obj-$(CONFIG_IMX_HAB) += hab.o
	endif
	ifeq ($(SOC),$(filter $(SOC),vf610))
	obj-y += ddrmc-vf610.o
	obj-$(CONFIG_DDRMC_VF610_CALIBRATION) += ddrmc-vf610-calibration.o
	endif
	ifneq ($(CONFIG_SPL_BUILD),y)
	obj-$(CONFIG_CMD_BMODE) += cmd_bmode.o
	obj-$(CONFIG_CMD_HDMIDETECT) += cmd_hdmidet.o
	obj-$(CONFIG_CMD_DEKBLOB) += cmd_dek.o
	obj-$(CONFIG_CMD_NANDBCB) += cmd_nandbcb.o
	endif

	ifeq ($(CONFIG_SPL_BUILD),y)
	obj-$(CONFIG_SPL_LOAD_IMX_CONTAINER) += image-container.o parse-container.o
	endif

	PLUGIN = board/$(BOARDDIR)/plugin

	ifeq ($(CONFIG_USE_IMXIMG_PLUGIN),y)

	$(PLUGIN).o: $(PLUGIN).S FORCE
	$(Q)mkdir -p $(dir $@)
	$(call if_changed_dep,as_o_S)

	$(PLUGIN).bin: $(PLUGIN).o FORCE
	$(Q)mkdir -p $(dir $@)
	$(OBJCOPY) -O binary --gap-fill 0xff $< $@
	else

	$(PLUGIN).bin:

	endif

	quiet_cmd_cpp_cfg = CFGS $@
	cmd_cpp_cfg = $(CPP) $(cpp_flags) -D__ASSEMBLY__ -x c -o $@ $<

	# mkimage source config file
	IMX_CONFIG = $(CONFIG_IMX_CONFIG:"%"=%)

	# How to create a cpp processed config file, they all use the same source
	%.cfgout: $(IMX_CONFIG) FORCE
	$(Q)mkdir -p $(dir $@)
	$(call if_changed_dep,cpp_cfg)

	IMX_CONTAINER_CFG = $(CONFIG_IMX_CONTAINER_CFG:"%"=%)
	container.cfg: $(IMX_CONTAINER_CFG) FORCE
	$(Q)mkdir -p $(dir $@)
	$(call if_changed_dep,cpp_cfg)

	ifeq ($(CONFIG_ARCH_IMX8), y)
	CNTR_DEPFILES := $(srctree)/tools/imx_cntr_image.sh
	IMAGE_TYPE := imx8image
	ifeq ($(CONFIG_SPL_BUILD),y)
	SPL_DEPFILE_EXISTS := $(shell $(CPP) $(cpp_flags) -x c -o spl/u-boot-spl.cfgout $(srctree)/$(IMX_CONFIG); if [ -f spl/u-boot-spl.cfgout ]; then $(CNTR_DEPFILES) spl/u-boot-spl.cfgout; echo $$?; fi)
	endif
	DEPFILE_EXISTS := $(shell $(CPP) $(cpp_flags) -x c -o u-boot-dtb.cfgout $(srctree)/$(IMX_CONFIG); if [ -f u-boot-dtb.cfgout ]; then $(CNTR_DEPFILES) u-boot-dtb.cfgout; echo $$?; fi)
	else ifeq ($(CONFIG_ARCH_IMX8M), y)
	IMAGE_TYPE := imx8mimage
	DEPFILE_EXISTS := 0
	else
	IMAGE_TYPE := imximage
	DEPFILE_EXISTS := 0
	endif

	MKIMAGEFLAGS_u-boot.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \
	-T $(IMAGE_TYPE) -e $(CONFIG_SYS_TEXT_BASE)
	u-boot.imx: MKIMAGEOUTPUT = u-boot.imx.log

	u-boot.imx: u-boot.bin u-boot.cfgout $(PLUGIN).bin FORCE
	$(call if_changed,mkimage)

	ifeq ($(CONFIG_MULTI_DTB_FIT),y)
	MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \
	-T $(IMAGE_TYPE) -e $(CONFIG_SYS_TEXT_BASE)
	u-boot-dtb.imx: MKIMAGEOUTPUT = u-boot-dtb.imx.log

	u-boot-dtb.imx: u-boot-fit-dtb.bin u-boot-dtb.cfgout $(PLUGIN).bin FORCE
	ifeq ($(DEPFILE_EXISTS),0)
	$(call if_changed,mkimage)
	endif
	else ifeq ($(CONFIG_OF_SEPARATE),y)
	MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \
	-T $(IMAGE_TYPE) -e $(CONFIG_SYS_TEXT_BASE)
	u-boot-dtb.imx: MKIMAGEOUTPUT = u-boot-dtb.imx.log

	u-boot-dtb.imx: u-boot-dtb.bin u-boot-dtb.cfgout $(PLUGIN).bin FORCE
	ifeq ($(DEPFILE_EXISTS),0)
	$(call if_changed,mkimage)
	endif
	endif

	ifdef CONFIG_ARM64
	ifeq ($(CONFIG_ARCH_IMX8M), y)

	SPL: spl/u-boot-spl.bin spl/u-boot-spl.cfgout FORCE

	MKIMAGEFLAGS_flash.bin = -n spl/u-boot-spl.cfgout \
	-T $(IMAGE_TYPE) -e $(CONFIG_SPL_TEXT_BASE)
	flash.bin: MKIMAGEOUTPUT = flash.log

	spl/u-boot-spl.cfgout: $(IMX_CONFIG) FORCE
	$(Q)mkdir -p $(dir $@)
	$(call if_changed_dep,cpp_cfg)

	spl/u-boot-spl-ddr.bin: spl/u-boot-spl.bin spl/u-boot-spl.cfgout FORCE

	flash.bin: spl/u-boot-spl-ddr.bin u-boot.itb FORCE
	$(call if_changed,mkimage)
	endif

	ifeq ($(CONFIG_ARCH_IMX8), y)
	SPL:

	MKIMAGEFLAGS_flash.bin = -n spl/u-boot-spl.cfgout -T $(IMAGE_TYPE) -e 0x100000
	flash.bin: MKIMAGEOUTPUT = flash.log

	MKIMAGEFLAGS_u-boot.cnt = -n container.cfg -T $(IMAGE_TYPE) -e 0x100000
	u-boot.cnt: MKIMAGEOUTPUT = u-boot.cnt.log

	ifeq ($(CONFIG_SPL_LOAD_IMX_CONTAINER), y)
	u-boot.cnt: u-boot.bin container.cfg FORCE
	$(call if_changed,mkimage)
	flash.bin: spl/u-boot-spl.bin FORCE
	$(call if_changed,mkimage)
	@flashbin_size=`wc -c flash.bin \| awk '{print $$1}'`; \
	pad_cnt=$$(((flashbin_size + 0x400 - 1) / 0x400)); \
	echo "append u-boot.cnt at $$pad_cnt KB"; \
	dd if=u-boot.cnt of=flash.bin bs=1K seek=$$pad_cnt;
	else
	flash.bin: spl/u-boot-spl.bin FORCE
	$(call if_changed,mkimage)
	endif
	endif

	else
	MKIMAGEFLAGS_SPL = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \
	-T $(IMAGE_TYPE) -e $(CONFIG_SPL_TEXT_BASE)
	SPL: MKIMAGEOUTPUT = SPL.log

	SPL: spl/u-boot-spl.bin spl/u-boot-spl.cfgout $(PLUGIN).bin FORCE
	$(call if_changed,mkimage)

	MKIMAGEFLAGS_u-boot.uim = -A arm -O U-Boot -a $(CONFIG_SYS_TEXT_BASE) \
	-e $(CONFIG_SYS_TEXT_BASE) -C none -T firmware

	u-boot.uim: u-boot.bin FORCE
	$(call if_changed,mkimage)

	OBJCOPYFLAGS += -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
	append = cat $(filter-out $< $(PHONY), $^) >> $@

	quiet_cmd_pad_cat = CAT $@
	cmd_pad_cat = $(cmd_objcopy) && $(append) \|\| rm -f $@

	u-boot-with-spl.imx: SPL $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE
	$(call if_changed,pad_cat)

	u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE
	$(call if_changed,pad_cat)

	quiet_cmd_u-boot-nand-spl_imx = GEN $@
	cmd_u-boot-nand-spl_imx = (printf '\000\000\000\000\106\103\102\040\001' && \
	dd bs=1015 count=1 if=/dev/zero 2>/dev/null) \| cat - $< > $@

	spl/u-boot-nand-spl.imx: SPL FORCE
	$(call if_changed,u-boot-nand-spl_imx)
	endif

	targets += $(addprefix ../../../,SPL spl/u-boot-spl.cfgout u-boot-dtb.cfgout u-boot.cfgout u-boot.uim spl/u-boot-nand-spl.imx)

	obj-$(CONFIG_ARM64) += lowlevel.o

	obj-$(CONFIG_MX5) += mx5/
	obj-$(CONFIG_MX6) += mx6/
	obj-$(CONFIG_MX7) += mx7/
	obj-$(CONFIG_ARCH_MX7ULP) += mx7ulp/
	obj-$(CONFIG_ARCH_IMX8ULP) += imx8ulp/
	obj-$(CONFIG_IMX8M) += imx8m/
	obj-$(CONFIG_ARCH_IMX8) += imx8/
	obj-$(CONFIG_ARCH_IMXRT) += imxrt/

	obj-$(CONFIG_SPL_BOOTROM_SUPPORT) += spl_imx_romapi.o
	obj-$(CONFIG_IMX8_ROMAPI) += romapi.o