| /* |
| * Copyright 2015-2016 Freescale Semiconductor, Inc. |
| * Copyright 2017 NXP |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <net/pfe_eth/pfe_eth.h> |
| #include <net/pfe_eth/pfe_firmware.h> |
| |
| static struct tx_desc_s *g_tx_desc; |
| static struct rx_desc_s *g_rx_desc; |
| |
| /* |
| * HIF Rx interface function |
| * Reads the rx descriptor from the current location (rx_to_read). |
| * - If the descriptor has a valid data/pkt, then get the data pointer |
| * - check for the input rx phy number |
| * - increment the rx data pointer by pkt_head_room_size |
| * - decrement the data length by pkt_head_room_size |
| * - handover the packet to caller. |
| * |
| * @param[out] pkt_ptr - Pointer to store rx packet |
| * @param[out] phy_port - Pointer to store recv phy port |
| * |
| * @return -1 if no packet, else return length of packet. |
| */ |
| int pfe_recv(uchar **pkt_ptr, int *phy_port) |
| { |
| struct rx_desc_s *rx_desc = g_rx_desc; |
| struct buf_desc *bd; |
| int len = 0; |
| |
| struct hif_header_s *hif_header; |
| |
| bd = rx_desc->rx_base + rx_desc->rx_to_read; |
| |
| if (readl(&bd->ctrl) & BD_CTRL_DESC_EN) |
| return len; /* No pending Rx packet */ |
| |
| /* this len include hif_header(8 bytes) */ |
| len = readl(&bd->ctrl) & 0xFFFF; |
| |
| hif_header = (struct hif_header_s *)DDR_PFE_TO_VIRT(readl(&bd->data)); |
| |
| /* Get the receive port info from the packet */ |
| debug("Pkt received:"); |
| debug(" Pkt ptr(%p), len(%d), gemac_port(%d) status(%08x)\n", |
| hif_header, len, hif_header->port_no, readl(&bd->status)); |
| #ifdef DEBUG |
| { |
| int i; |
| unsigned char *p = (unsigned char *)hif_header; |
| |
| for (i = 0; i < len; i++) { |
| if (!(i % 16)) |
| printf("\n"); |
| printf(" %02x", p[i]); |
| } |
| printf("\n"); |
| } |
| #endif |
| |
| *pkt_ptr = (uchar *)(hif_header + 1); |
| *phy_port = hif_header->port_no; |
| len -= sizeof(struct hif_header_s); |
| |
| return len; |
| } |
| |
| /* |
| * HIF function to check the Rx done |
| * This function will check the rx done indication of the current rx_to_read |
| * locations |
| * if success, moves the rx_to_read to next location. |
| */ |
| int pfe_eth_free_pkt(struct udevice *dev, uchar *packet, int length) |
| { |
| struct rx_desc_s *rx_desc = g_rx_desc; |
| struct buf_desc *bd; |
| |
| debug("%s:rx_base: %p, rx_to_read: %d\n", __func__, rx_desc->rx_base, |
| rx_desc->rx_to_read); |
| |
| bd = rx_desc->rx_base + rx_desc->rx_to_read; |
| |
| /* reset the control field */ |
| writel((MAX_FRAME_SIZE | BD_CTRL_LIFM | BD_CTRL_DESC_EN |
| | BD_CTRL_DIR), &bd->ctrl); |
| writel(0, &bd->status); |
| |
| debug("Rx Done : status: %08x, ctrl: %08x\n", readl(&bd->status), |
| readl(&bd->ctrl)); |
| |
| /* Give START_STROBE to BDP to fetch the descriptor __NOW__, |
| * BDP need not wait for rx_poll_cycle time to fetch the descriptor, |
| * In idle state (ie., no rx pkt), BDP will not fetch |
| * the descriptor even if strobe is given. |
| */ |
| writel((readl(HIF_RX_CTRL) | HIF_CTRL_BDP_CH_START_WSTB), HIF_RX_CTRL); |
| |
| /* increment the rx_to_read index to next location */ |
| rx_desc->rx_to_read = (rx_desc->rx_to_read + 1) |
| & (rx_desc->rx_ring_size - 1); |
| |
| debug("Rx next pkt location: %d\n", rx_desc->rx_to_read); |
| |
| return 0; |
| } |
| |
| /* |
| * HIF Tx interface function |
| * This function sends a single packet to PFE from HIF interface. |
| * - No interrupt indication on tx completion. |
| * - Data is copied to tx buffers before tx descriptor is updated |
| * and TX DMA is enabled. |
| * |
| * @param[in] phy_port Phy port number to send out this packet |
| * @param[in] data Pointer to the data |
| * @param[in] length Length of the ethernet packet to be transferred. |
| * |
| * @return -1 if tx Q is full, else returns the tx location where the pkt is |
| * placed. |
| */ |
| int pfe_send(int phy_port, void *data, int length) |
| { |
| struct tx_desc_s *tx_desc = g_tx_desc; |
| struct buf_desc *bd; |
| struct hif_header_s hif_header; |
| u8 *tx_buf_va; |
| |
| debug("%s:pkt: %p, len: %d, tx_base: %p, tx_to_send: %d\n", __func__, |
| data, length, tx_desc->tx_base, tx_desc->tx_to_send); |
| |
| bd = tx_desc->tx_base + tx_desc->tx_to_send; |
| |
| /* check queue-full condition */ |
| if (readl(&bd->ctrl) & BD_CTRL_DESC_EN) |
| return -1; |
| |
| /* PFE checks for min pkt size */ |
| if (length < MIN_PKT_SIZE) |
| length = MIN_PKT_SIZE; |
| |
| tx_buf_va = (void *)DDR_PFE_TO_VIRT(readl(&bd->data)); |
| debug("%s: tx_buf_va: %p, tx_buf_pa: %08x\n", __func__, tx_buf_va, |
| readl(&bd->data)); |
| |
| /* Fill the gemac/phy port number to send this packet out */ |
| memset(&hif_header, 0, sizeof(struct hif_header_s)); |
| hif_header.port_no = phy_port; |
| |
| memcpy(tx_buf_va, (u8 *)&hif_header, sizeof(struct hif_header_s)); |
| memcpy(tx_buf_va + sizeof(struct hif_header_s), data, length); |
| length += sizeof(struct hif_header_s); |
| |
| #ifdef DEBUG |
| { |
| int i; |
| unsigned char *p = (unsigned char *)tx_buf_va; |
| |
| for (i = 0; i < length; i++) { |
| if (!(i % 16)) |
| printf("\n"); |
| printf("%02x ", p[i]); |
| } |
| } |
| #endif |
| |
| debug("Tx Done: status: %08x, ctrl: %08x\n", readl(&bd->status), |
| readl(&bd->ctrl)); |
| |
| /* fill the tx desc */ |
| writel((u32)(BD_CTRL_DESC_EN | BD_CTRL_LIFM | (length & 0xFFFF)), |
| &bd->ctrl); |
| writel(0, &bd->status); |
| |
| writel((HIF_CTRL_DMA_EN | HIF_CTRL_BDP_CH_START_WSTB), HIF_TX_CTRL); |
| |
| udelay(100); |
| |
| return tx_desc->tx_to_send; |
| } |
| |
| /* |
| * HIF function to check the Tx done |
| * This function will check the tx done indication of the current tx_to_send |
| * locations |
| * if success, moves the tx_to_send to next location. |
| * |
| * @return -1 if TX ownership bit is not cleared by hw. |
| * else on success (tx done completion) return zero. |
| */ |
| int pfe_tx_done(void) |
| { |
| struct tx_desc_s *tx_desc = g_tx_desc; |
| struct buf_desc *bd; |
| |
| debug("%s:tx_base: %p, tx_to_send: %d\n", __func__, tx_desc->tx_base, |
| tx_desc->tx_to_send); |
| |
| bd = tx_desc->tx_base + tx_desc->tx_to_send; |
| |
| /* check queue-full condition */ |
| if (readl(&bd->ctrl) & BD_CTRL_DESC_EN) |
| return -1; |
| |
| /* reset the control field */ |
| writel(0, &bd->ctrl); |
| writel(0, &bd->status); |
| |
| debug("Tx Done : status: %08x, ctrl: %08x\n", readl(&bd->status), |
| readl(&bd->ctrl)); |
| |
| /* increment the txtosend index to next location */ |
| tx_desc->tx_to_send = (tx_desc->tx_to_send + 1) |
| & (tx_desc->tx_ring_size - 1); |
| |
| debug("Tx next pkt location: %d\n", tx_desc->tx_to_send); |
| |
| return 0; |
| } |
| |
| /* |
| * Helper function to dump Rx descriptors. |
| */ |
| static inline void hif_rx_desc_dump(void) |
| { |
| struct buf_desc *bd_va; |
| int i; |
| struct rx_desc_s *rx_desc; |
| |
| if (!g_rx_desc) { |
| printf("%s: HIF Rx desc no init\n", __func__); |
| return; |
| } |
| |
| rx_desc = g_rx_desc; |
| bd_va = rx_desc->rx_base; |
| |
| debug("HIF rx desc: base_va: %p, base_pa: %08x\n", rx_desc->rx_base, |
| rx_desc->rx_base_pa); |
| for (i = 0; i < rx_desc->rx_ring_size; i++) { |
| debug("status: %08x, ctrl: %08x, data: %08x, next: 0x%08x\n", |
| readl(&bd_va->status), |
| readl(&bd_va->ctrl), |
| readl(&bd_va->data), |
| readl(&bd_va->next)); |
| bd_va++; |
| } |
| } |
| |
| /* |
| * This function mark all Rx descriptors as LAST_BD. |
| */ |
| void hif_rx_desc_disable(void) |
| { |
| int i; |
| struct rx_desc_s *rx_desc; |
| struct buf_desc *bd_va; |
| |
| if (!g_rx_desc) { |
| printf("%s: HIF Rx desc not initialized\n", __func__); |
| return; |
| } |
| |
| rx_desc = g_rx_desc; |
| bd_va = rx_desc->rx_base; |
| |
| for (i = 0; i < rx_desc->rx_ring_size; i++) { |
| writel(readl(&bd_va->ctrl) | BD_CTRL_LAST_BD, &bd_va->ctrl); |
| bd_va++; |
| } |
| } |
| |
| /* |
| * HIF Rx Desc initialization function. |
| */ |
| static int hif_rx_desc_init(struct pfe_ddr_address *pfe_addr) |
| { |
| u32 ctrl; |
| struct buf_desc *bd_va; |
| struct buf_desc *bd_pa; |
| struct rx_desc_s *rx_desc; |
| u32 rx_buf_pa; |
| int i; |
| |
| /* sanity check */ |
| if (g_rx_desc) { |
| printf("%s: HIF Rx desc re-init request\n", __func__); |
| return 0; |
| } |
| |
| rx_desc = (struct rx_desc_s *)malloc(sizeof(struct rx_desc_s)); |
| if (!rx_desc) { |
| printf("%s: Memory allocation failure\n", __func__); |
| return -ENOMEM; |
| } |
| memset(rx_desc, 0, sizeof(struct rx_desc_s)); |
| |
| /* init: Rx ring buffer */ |
| rx_desc->rx_ring_size = HIF_RX_DESC_NT; |
| |
| /* NOTE: must be 64bit aligned */ |
| bd_va = (struct buf_desc *)(pfe_addr->ddr_pfe_baseaddr |
| + RX_BD_BASEADDR); |
| bd_pa = (struct buf_desc *)(pfe_addr->ddr_pfe_phys_baseaddr |
| + RX_BD_BASEADDR); |
| |
| rx_desc->rx_base = bd_va; |
| rx_desc->rx_base_pa = (unsigned long)bd_pa; |
| |
| rx_buf_pa = pfe_addr->ddr_pfe_phys_baseaddr + HIF_RX_PKT_DDR_BASEADDR; |
| |
| debug("%s: Rx desc base: %p, base_pa: %08x, desc_count: %d\n", |
| __func__, rx_desc->rx_base, rx_desc->rx_base_pa, |
| rx_desc->rx_ring_size); |
| |
| memset(bd_va, 0, sizeof(struct buf_desc) * rx_desc->rx_ring_size); |
| |
| ctrl = (MAX_FRAME_SIZE | BD_CTRL_DESC_EN | BD_CTRL_DIR | BD_CTRL_LIFM); |
| |
| for (i = 0; i < rx_desc->rx_ring_size; i++) { |
| writel((unsigned long)(bd_pa + 1), &bd_va->next); |
| writel(ctrl, &bd_va->ctrl); |
| writel(rx_buf_pa + (i * MAX_FRAME_SIZE), &bd_va->data); |
| bd_va++; |
| bd_pa++; |
| } |
| --bd_va; |
| writel((u32)rx_desc->rx_base_pa, &bd_va->next); |
| |
| writel(rx_desc->rx_base_pa, HIF_RX_BDP_ADDR); |
| writel((readl(HIF_RX_CTRL) | HIF_CTRL_BDP_CH_START_WSTB), HIF_RX_CTRL); |
| |
| g_rx_desc = rx_desc; |
| |
| return 0; |
| } |
| |
| /* |
| * Helper function to dump Tx Descriptors. |
| */ |
| static inline void hif_tx_desc_dump(void) |
| { |
| struct tx_desc_s *tx_desc; |
| int i; |
| struct buf_desc *bd_va; |
| |
| if (!g_tx_desc) { |
| printf("%s: HIF Tx desc no init\n", __func__); |
| return; |
| } |
| |
| tx_desc = g_tx_desc; |
| bd_va = tx_desc->tx_base; |
| |
| debug("HIF tx desc: base_va: %p, base_pa: %08x\n", tx_desc->tx_base, |
| tx_desc->tx_base_pa); |
| |
| for (i = 0; i < tx_desc->tx_ring_size; i++) |
| bd_va++; |
| } |
| |
| /* |
| * HIF Tx descriptor initialization function. |
| */ |
| static int hif_tx_desc_init(struct pfe_ddr_address *pfe_addr) |
| { |
| struct buf_desc *bd_va; |
| struct buf_desc *bd_pa; |
| int i; |
| struct tx_desc_s *tx_desc; |
| u32 tx_buf_pa; |
| |
| /* sanity check */ |
| if (g_tx_desc) { |
| printf("%s: HIF Tx desc re-init request\n", __func__); |
| return 0; |
| } |
| |
| tx_desc = (struct tx_desc_s *)malloc(sizeof(struct tx_desc_s)); |
| if (!tx_desc) { |
| printf("%s:%d:Memory allocation failure\n", __func__, |
| __LINE__); |
| return -ENOMEM; |
| } |
| memset(tx_desc, 0, sizeof(struct tx_desc_s)); |
| |
| /* init: Tx ring buffer */ |
| tx_desc->tx_ring_size = HIF_TX_DESC_NT; |
| |
| /* NOTE: must be 64bit aligned */ |
| bd_va = (struct buf_desc *)(pfe_addr->ddr_pfe_baseaddr |
| + TX_BD_BASEADDR); |
| bd_pa = (struct buf_desc *)(pfe_addr->ddr_pfe_phys_baseaddr |
| + TX_BD_BASEADDR); |
| |
| tx_desc->tx_base_pa = (unsigned long)bd_pa; |
| tx_desc->tx_base = bd_va; |
| |
| debug("%s: Tx desc_base: %p, base_pa: %08x, desc_count: %d\n", |
| __func__, tx_desc->tx_base, tx_desc->tx_base_pa, |
| tx_desc->tx_ring_size); |
| |
| memset(bd_va, 0, sizeof(struct buf_desc) * tx_desc->tx_ring_size); |
| |
| tx_buf_pa = pfe_addr->ddr_pfe_phys_baseaddr + HIF_TX_PKT_DDR_BASEADDR; |
| |
| for (i = 0; i < tx_desc->tx_ring_size; i++) { |
| writel((unsigned long)(bd_pa + 1), &bd_va->next); |
| writel(tx_buf_pa + (i * MAX_FRAME_SIZE), &bd_va->data); |
| bd_va++; |
| bd_pa++; |
| } |
| --bd_va; |
| writel((u32)tx_desc->tx_base_pa, &bd_va->next); |
| |
| writel(tx_desc->tx_base_pa, HIF_TX_BDP_ADDR); |
| |
| g_tx_desc = tx_desc; |
| |
| return 0; |
| } |
| |
| /* |
| * PFE/Class initialization. |
| */ |
| static void pfe_class_init(struct pfe_ddr_address *pfe_addr) |
| { |
| struct class_cfg class_cfg = { |
| .route_table_baseaddr = pfe_addr->ddr_pfe_phys_baseaddr + |
| ROUTE_TABLE_BASEADDR, |
| .route_table_hash_bits = ROUTE_TABLE_HASH_BITS, |
| }; |
| |
| class_init(&class_cfg); |
| |
| debug("class init complete\n"); |
| } |
| |
| /* |
| * PFE/TMU initialization. |
| */ |
| static void pfe_tmu_init(struct pfe_ddr_address *pfe_addr) |
| { |
| struct tmu_cfg tmu_cfg = { |
| .llm_base_addr = pfe_addr->ddr_pfe_phys_baseaddr |
| + TMU_LLM_BASEADDR, |
| .llm_queue_len = TMU_LLM_QUEUE_LEN, |
| }; |
| |
| tmu_init(&tmu_cfg); |
| |
| debug("tmu init complete\n"); |
| } |
| |
| /* |
| * PFE/BMU (both BMU1 & BMU2) initialization. |
| */ |
| static void pfe_bmu_init(struct pfe_ddr_address *pfe_addr) |
| { |
| struct bmu_cfg bmu1_cfg = { |
| .baseaddr = CBUS_VIRT_TO_PFE(LMEM_BASE_ADDR + |
| BMU1_LMEM_BASEADDR), |
| .count = BMU1_BUF_COUNT, |
| .size = BMU1_BUF_SIZE, |
| }; |
| |
| struct bmu_cfg bmu2_cfg = { |
| .baseaddr = pfe_addr->ddr_pfe_phys_baseaddr + BMU2_DDR_BASEADDR, |
| .count = BMU2_BUF_COUNT, |
| .size = BMU2_BUF_SIZE, |
| }; |
| |
| bmu_init(BMU1_BASE_ADDR, &bmu1_cfg); |
| debug("bmu1 init: done\n"); |
| |
| bmu_init(BMU2_BASE_ADDR, &bmu2_cfg); |
| debug("bmu2 init: done\n"); |
| } |
| |
| /* |
| * PFE/GPI initialization function. |
| * - egpi1, egpi2, egpi3, hgpi |
| */ |
| static void pfe_gpi_init(struct pfe_ddr_address *pfe_addr) |
| { |
| struct gpi_cfg egpi1_cfg = { |
| .lmem_rtry_cnt = EGPI1_LMEM_RTRY_CNT, |
| .tmlf_txthres = EGPI1_TMLF_TXTHRES, |
| .aseq_len = EGPI1_ASEQ_LEN, |
| }; |
| |
| struct gpi_cfg egpi2_cfg = { |
| .lmem_rtry_cnt = EGPI2_LMEM_RTRY_CNT, |
| .tmlf_txthres = EGPI2_TMLF_TXTHRES, |
| .aseq_len = EGPI2_ASEQ_LEN, |
| }; |
| |
| struct gpi_cfg hgpi_cfg = { |
| .lmem_rtry_cnt = HGPI_LMEM_RTRY_CNT, |
| .tmlf_txthres = HGPI_TMLF_TXTHRES, |
| .aseq_len = HGPI_ASEQ_LEN, |
| }; |
| |
| gpi_init(EGPI1_BASE_ADDR, &egpi1_cfg); |
| debug("GPI1 init complete\n"); |
| |
| gpi_init(EGPI2_BASE_ADDR, &egpi2_cfg); |
| debug("GPI2 init complete\n"); |
| |
| gpi_init(HGPI_BASE_ADDR, &hgpi_cfg); |
| debug("HGPI init complete\n"); |
| } |
| |
| /* |
| * PFE/HIF initialization function. |
| */ |
| static int pfe_hif_init(struct pfe_ddr_address *pfe_addr) |
| { |
| int ret = 0; |
| |
| hif_tx_disable(); |
| hif_rx_disable(); |
| |
| ret = hif_tx_desc_init(pfe_addr); |
| if (ret) |
| return ret; |
| ret = hif_rx_desc_init(pfe_addr); |
| if (ret) |
| return ret; |
| |
| hif_init(); |
| |
| hif_tx_enable(); |
| hif_rx_enable(); |
| |
| hif_rx_desc_dump(); |
| hif_tx_desc_dump(); |
| |
| debug("HIF init complete\n"); |
| return ret; |
| } |
| |
| /* |
| * PFE initialization |
| * - Firmware loading (CLASS-PE and TMU-PE) |
| * - BMU1 and BMU2 init |
| * - GEMAC init |
| * - GPI init |
| * - CLASS-PE init |
| * - TMU-PE init |
| * - HIF tx and rx descriptors init |
| * |
| * @param[in] edev Pointer to eth device structure. |
| * |
| * @return 0, on success. |
| */ |
| static int pfe_hw_init(struct pfe_ddr_address *pfe_addr) |
| { |
| int ret = 0; |
| |
| debug("%s: start\n", __func__); |
| |
| writel(0x3, CLASS_PE_SYS_CLK_RATIO); |
| writel(0x3, TMU_PE_SYS_CLK_RATIO); |
| writel(0x3, UTIL_PE_SYS_CLK_RATIO); |
| udelay(10); |
| |
| pfe_class_init(pfe_addr); |
| |
| pfe_tmu_init(pfe_addr); |
| |
| pfe_bmu_init(pfe_addr); |
| |
| pfe_gpi_init(pfe_addr); |
| |
| ret = pfe_hif_init(pfe_addr); |
| if (ret) |
| return ret; |
| |
| bmu_enable(BMU1_BASE_ADDR); |
| debug("bmu1 enabled\n"); |
| |
| bmu_enable(BMU2_BASE_ADDR); |
| debug("bmu2 enabled\n"); |
| |
| debug("%s: done\n", __func__); |
| |
| return ret; |
| } |
| |
| /* |
| * PFE driver init function. |
| * - Initializes pfe_lib |
| * - pfe hw init |
| * - fw loading and enables PEs |
| * - should be executed once. |
| * |
| * @param[in] pfe Pointer the pfe control block |
| */ |
| int pfe_drv_init(struct pfe_ddr_address *pfe_addr) |
| { |
| int ret = 0; |
| |
| pfe_lib_init(); |
| |
| ret = pfe_hw_init(pfe_addr); |
| if (ret) |
| return ret; |
| |
| /* Load the class,TM, Util fw. |
| * By now pfe is: |
| * - out of reset + disabled + configured. |
| * Fw loading should be done after pfe_hw_init() |
| */ |
| /* It loads default inbuilt sbl firmware */ |
| pfe_firmware_init(); |
| |
| return ret; |
| } |
| |
| /* |
| * PFE remove function |
| * - stops PEs |
| * - frees tx/rx descriptor resources |
| * - should be called once. |
| * |
| * @param[in] pfe Pointer to pfe control block. |
| */ |
| int pfe_eth_remove(struct udevice *dev) |
| { |
| if (g_tx_desc) |
| free(g_tx_desc); |
| |
| if (g_rx_desc) |
| free(g_rx_desc); |
| |
| pfe_firmware_exit(); |
| |
| return 0; |
| } |