| if RCAR_32 |
| |
| config ARCH_RMOBILE_BOARD_STRING |
| string "Renesas RCar Gen2 board name" |
| default "Board" |
| |
| config RCAR_GEN2 |
| bool "Renesas RCar Gen2" |
| |
| config R8A7740 |
| bool "Renesas SoC R8A7740" |
| |
| config R8A7790 |
| bool "Renesas SoC R8A7790" |
| select RCAR_GEN2 |
| select ARM_CORTEX_A15_CVE_2017_5715 |
| |
| config R8A7791 |
| bool "Renesas SoC R8A7791" |
| select RCAR_GEN2 |
| select ARM_CORTEX_A15_CVE_2017_5715 |
| |
| config R8A7792 |
| bool "Renesas SoC R8A7792" |
| select RCAR_GEN2 |
| select ARM_CORTEX_A15_CVE_2017_5715 |
| |
| config R8A7793 |
| bool "Renesas SoC R8A7793" |
| select RCAR_GEN2 |
| select ARM_CORTEX_A15_CVE_2017_5715 |
| |
| config R8A7794 |
| bool "Renesas SoC R8A7794" |
| select RCAR_GEN2 |
| |
| choice |
| prompt "Renesas ARM SoCs board select" |
| optional |
| |
| config TARGET_ARMADILLO_800EVA |
| bool "armadillo 800 eva board" |
| |
| config TARGET_BLANCHE |
| bool "Blanche board" |
| select DM |
| select DM_SERIAL |
| select USE_TINY_PRINTF |
| |
| config TARGET_GOSE |
| bool "Gose board" |
| select DM |
| select DM_SERIAL |
| select SUPPORT_SPL |
| select USE_TINY_PRINTF |
| select SPL_TINY_MEMSET |
| |
| config TARGET_KOELSCH |
| bool "Koelsch board" |
| select DM |
| select DM_SERIAL |
| select SUPPORT_SPL |
| select USE_TINY_PRINTF |
| select SPL_TINY_MEMSET |
| |
| config TARGET_LAGER |
| bool "Lager board" |
| select DM |
| select DM_SERIAL |
| select SUPPORT_SPL |
| select USE_TINY_PRINTF |
| select SPL_TINY_MEMSET |
| |
| config TARGET_KZM9G |
| bool "KZM9D board" |
| |
| config TARGET_ALT |
| bool "Alt board" |
| select DM |
| select DM_SERIAL |
| select SUPPORT_SPL |
| select USE_TINY_PRINTF |
| select SPL_TINY_MEMSET |
| |
| config TARGET_SILK |
| bool "Silk board" |
| select DM |
| select DM_SERIAL |
| select SUPPORT_SPL |
| select USE_TINY_PRINTF |
| select SPL_TINY_MEMSET |
| |
| config TARGET_PORTER |
| bool "Porter board" |
| select DM |
| select DM_SERIAL |
| select SUPPORT_SPL |
| select USE_TINY_PRINTF |
| select SPL_TINY_MEMSET |
| |
| config TARGET_STOUT |
| bool "Stout board" |
| select DM |
| select DM_SERIAL |
| select SUPPORT_SPL |
| select USE_TINY_PRINTF |
| select SPL_TINY_MEMSET |
| |
| endchoice |
| |
| config SYS_SOC |
| default "rmobile" |
| |
| config RMOBILE_EXTRAM_BOOT |
| bool "Enable boot from RAM" |
| depends on TARGET_ALT || TARGET_BLANCHE || TARGET_KOELSCH || TARGET_LAGER || TARGET_PORTER || TARGET_SILK || TARGET_STOUT |
| default n |
| |
| choice |
| prompt "Qos setting primary" |
| depends on TARGET_ALT || TARGET_BLANCHE || TARGET_GOSE || TARGET_KOELSCH || TARGET_LAGER |
| default QOS_PRI_NORMAL |
| |
| config QOS_PRI_NORMAL |
| bool "Non primary" |
| help |
| Select normal mode for QoS setting. |
| |
| config QOS_PRI_MEDIA |
| bool "Media primary" |
| help |
| Select multimedia primary mode for QoS setting. |
| |
| config QOS_PRI_GFX |
| bool "GFX primary" |
| help |
| Select GFX(graphics) primary mode for QoS setting. |
| |
| endchoice |
| |
| source "board/atmark-techno/armadillo-800eva/Kconfig" |
| source "board/renesas/blanche/Kconfig" |
| source "board/renesas/gose/Kconfig" |
| source "board/renesas/koelsch/Kconfig" |
| source "board/renesas/lager/Kconfig" |
| source "board/kmc/kzm9g/Kconfig" |
| source "board/renesas/alt/Kconfig" |
| source "board/renesas/silk/Kconfig" |
| source "board/renesas/porter/Kconfig" |
| source "board/renesas/stout/Kconfig" |
| |
| endif |