| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * QE UEC ethernet controller driver |
| * |
| * based on drivers/qe/uec.c from NXP |
| * |
| * Copyright (C) 2020 Heiko Schocher <hs@denx.de> |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <memalign.h> |
| #include <miiphy.h> |
| #include <asm/io.h> |
| |
| #include "dm_qe_uec.h" |
| |
| #define QE_UEC_DRIVER_NAME "ucc_geth" |
| |
| /* Default UTBIPAR SMI address */ |
| #ifndef CONFIG_UTBIPAR_INIT_TBIPA |
| #define CONFIG_UTBIPAR_INIT_TBIPA 0x1F |
| #endif |
| |
| static int uec_mac_enable(struct uec_priv *uec, comm_dir_e mode) |
| { |
| uec_t *uec_regs; |
| u32 maccfg1; |
| |
| uec_regs = uec->uec_regs; |
| maccfg1 = in_be32(&uec_regs->maccfg1); |
| |
| if (mode & COMM_DIR_TX) { |
| maccfg1 |= MACCFG1_ENABLE_TX; |
| out_be32(&uec_regs->maccfg1, maccfg1); |
| uec->mac_tx_enabled = 1; |
| } |
| |
| if (mode & COMM_DIR_RX) { |
| maccfg1 |= MACCFG1_ENABLE_RX; |
| out_be32(&uec_regs->maccfg1, maccfg1); |
| uec->mac_rx_enabled = 1; |
| } |
| |
| return 0; |
| } |
| |
| static int uec_mac_disable(struct uec_priv *uec, comm_dir_e mode) |
| { |
| uec_t *uec_regs; |
| u32 maccfg1; |
| |
| uec_regs = uec->uec_regs; |
| maccfg1 = in_be32(&uec_regs->maccfg1); |
| |
| if (mode & COMM_DIR_TX) { |
| maccfg1 &= ~MACCFG1_ENABLE_TX; |
| out_be32(&uec_regs->maccfg1, maccfg1); |
| uec->mac_tx_enabled = 0; |
| } |
| |
| if (mode & COMM_DIR_RX) { |
| maccfg1 &= ~MACCFG1_ENABLE_RX; |
| out_be32(&uec_regs->maccfg1, maccfg1); |
| uec->mac_rx_enabled = 0; |
| } |
| |
| return 0; |
| } |
| |
| static int uec_restart_tx(struct uec_priv *uec) |
| { |
| struct uec_inf *ui = uec->uec_info; |
| u32 cecr_subblock; |
| |
| cecr_subblock = ucc_fast_get_qe_cr_subblock(ui->uf_info.ucc_num); |
| qe_issue_cmd(QE_RESTART_TX, cecr_subblock, |
| (u8)QE_CR_PROTOCOL_ETHERNET, 0); |
| |
| uec->grace_stopped_tx = 0; |
| |
| return 0; |
| } |
| |
| static int uec_restart_rx(struct uec_priv *uec) |
| { |
| struct uec_inf *ui = uec->uec_info; |
| u32 cecr_subblock; |
| |
| cecr_subblock = ucc_fast_get_qe_cr_subblock(ui->uf_info.ucc_num); |
| qe_issue_cmd(QE_RESTART_RX, cecr_subblock, |
| (u8)QE_CR_PROTOCOL_ETHERNET, 0); |
| |
| uec->grace_stopped_rx = 0; |
| |
| return 0; |
| } |
| |
| static int uec_open(struct uec_priv *uec, comm_dir_e mode) |
| { |
| struct ucc_fast_priv *uccf; |
| |
| uccf = uec->uccf; |
| |
| /* check if the UCC number is in range. */ |
| if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) { |
| printf("%s: ucc_num out of range.\n", __func__); |
| return -EINVAL; |
| } |
| |
| /* Enable MAC */ |
| uec_mac_enable(uec, mode); |
| |
| /* Enable UCC fast */ |
| ucc_fast_enable(uccf, mode); |
| |
| /* RISC microcode start */ |
| if ((mode & COMM_DIR_TX) && uec->grace_stopped_tx) |
| uec_restart_tx(uec); |
| |
| if ((mode & COMM_DIR_RX) && uec->grace_stopped_rx) |
| uec_restart_rx(uec); |
| |
| return 0; |
| } |
| |
| static int uec_set_mac_if_mode(struct uec_priv *uec) |
| { |
| struct uec_inf *uec_info = uec->uec_info; |
| phy_interface_t enet_if_mode; |
| uec_t *uec_regs; |
| u32 upsmr; |
| u32 maccfg2; |
| |
| uec_regs = uec->uec_regs; |
| enet_if_mode = uec_info->enet_interface_type; |
| |
| maccfg2 = in_be32(&uec_regs->maccfg2); |
| maccfg2 &= ~MACCFG2_INTERFACE_MODE_MASK; |
| |
| upsmr = in_be32(&uec->uccf->uf_regs->upsmr); |
| upsmr &= ~(UPSMR_RPM | UPSMR_TBIM | UPSMR_R10M | UPSMR_RMM); |
| |
| switch (uec_info->speed) { |
| case SPEED_10: |
| maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE; |
| switch (enet_if_mode) { |
| case PHY_INTERFACE_MODE_MII: |
| break; |
| case PHY_INTERFACE_MODE_RGMII: |
| upsmr |= (UPSMR_RPM | UPSMR_R10M); |
| break; |
| case PHY_INTERFACE_MODE_RMII: |
| upsmr |= (UPSMR_R10M | UPSMR_RMM); |
| break; |
| default: |
| return -EINVAL; |
| } |
| break; |
| case SPEED_100: |
| maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE; |
| switch (enet_if_mode) { |
| case PHY_INTERFACE_MODE_MII: |
| break; |
| case PHY_INTERFACE_MODE_RGMII: |
| upsmr |= UPSMR_RPM; |
| break; |
| case PHY_INTERFACE_MODE_RMII: |
| upsmr |= UPSMR_RMM; |
| break; |
| default: |
| return -EINVAL; |
| } |
| break; |
| case SPEED_1000: |
| maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE; |
| switch (enet_if_mode) { |
| case PHY_INTERFACE_MODE_GMII: |
| break; |
| case PHY_INTERFACE_MODE_TBI: |
| upsmr |= UPSMR_TBIM; |
| break; |
| case PHY_INTERFACE_MODE_RTBI: |
| upsmr |= (UPSMR_RPM | UPSMR_TBIM); |
| break; |
| case PHY_INTERFACE_MODE_RGMII_RXID: |
| case PHY_INTERFACE_MODE_RGMII_TXID: |
| case PHY_INTERFACE_MODE_RGMII_ID: |
| case PHY_INTERFACE_MODE_RGMII: |
| upsmr |= UPSMR_RPM; |
| break; |
| case PHY_INTERFACE_MODE_SGMII: |
| upsmr |= UPSMR_SGMM; |
| break; |
| default: |
| return -EINVAL; |
| } |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| out_be32(&uec_regs->maccfg2, maccfg2); |
| out_be32(&uec->uccf->uf_regs->upsmr, upsmr); |
| |
| return 0; |
| } |
| |
| static int qe_uec_start(struct udevice *dev) |
| { |
| struct qe_uec_priv *priv = dev_get_priv(dev); |
| struct uec_priv *uec = priv->uec; |
| struct phy_device *phydev = priv->phydev; |
| struct uec_inf *uec_info = uec->uec_info; |
| int err; |
| |
| if (!phydev) |
| return -ENODEV; |
| |
| /* Setup MAC interface mode */ |
| genphy_update_link(phydev); |
| genphy_parse_link(phydev); |
| uec_info->speed = phydev->speed; |
| uec_set_mac_if_mode(uec); |
| |
| err = uec_open(uec, COMM_DIR_RX_AND_TX); |
| if (err) { |
| printf("%s: cannot enable UEC device\n", dev->name); |
| return -EINVAL; |
| } |
| |
| return (phydev->link ? 0 : -EINVAL); |
| } |
| |
| static int qe_uec_send(struct udevice *dev, void *packet, int length) |
| { |
| struct qe_uec_priv *priv = dev_get_priv(dev); |
| struct uec_priv *uec = priv->uec; |
| struct ucc_fast_priv *uccf = uec->uccf; |
| struct buffer_descriptor *bd; |
| u16 status; |
| int i; |
| int result = 0; |
| |
| uccf = uec->uccf; |
| bd = uec->tx_bd; |
| |
| /* Find an empty TxBD */ |
| for (i = 0; BD_STATUS(bd) & TX_BD_READY; i++) { |
| if (i > 0x100000) { |
| printf("%s: tx buffer not ready\n", dev->name); |
| return result; |
| } |
| } |
| |
| /* Init TxBD */ |
| BD_DATA_SET(bd, packet); |
| BD_LENGTH_SET(bd, length); |
| status = BD_STATUS(bd); |
| status &= BD_WRAP; |
| status |= (TX_BD_READY | TX_BD_LAST); |
| BD_STATUS_SET(bd, status); |
| |
| /* Tell UCC to transmit the buffer */ |
| ucc_fast_transmit_on_demand(uccf); |
| |
| /* Wait for buffer to be transmitted */ |
| for (i = 0; BD_STATUS(bd) & TX_BD_READY; i++) { |
| if (i > 0x100000) { |
| printf("%s: tx error\n", dev->name); |
| return result; |
| } |
| } |
| |
| /* Ok, the buffer be transimitted */ |
| BD_ADVANCE(bd, status, uec->p_tx_bd_ring); |
| uec->tx_bd = bd; |
| result = 1; |
| |
| return result; |
| } |
| |
| /* |
| * Receive frame: |
| * - wait for the next BD to get ready bit set |
| * - clean up the descriptor |
| * - move on and indicate to HW that the cleaned BD is available for Rx |
| */ |
| static int qe_uec_recv(struct udevice *dev, int flags, uchar **packetp) |
| { |
| struct qe_uec_priv *priv = dev_get_priv(dev); |
| struct uec_priv *uec = priv->uec; |
| struct buffer_descriptor *bd; |
| u16 status; |
| u16 len = 0; |
| u8 *data; |
| |
| *packetp = memalign(ARCH_DMA_MINALIGN, MAX_RXBUF_LEN); |
| if (*packetp == 0) { |
| printf("%s: error allocating packetp\n", __func__); |
| return -ENOMEM; |
| } |
| |
| bd = uec->rx_bd; |
| status = BD_STATUS(bd); |
| |
| while (!(status & RX_BD_EMPTY)) { |
| if (!(status & RX_BD_ERROR)) { |
| data = BD_DATA(bd); |
| len = BD_LENGTH(bd); |
| memcpy(*packetp, (char *)data, len); |
| } else { |
| printf("%s: Rx error\n", dev->name); |
| } |
| status &= BD_CLEAN; |
| BD_LENGTH_SET(bd, 0); |
| BD_STATUS_SET(bd, status | RX_BD_EMPTY); |
| BD_ADVANCE(bd, status, uec->p_rx_bd_ring); |
| status = BD_STATUS(bd); |
| } |
| uec->rx_bd = bd; |
| |
| return len; |
| } |
| |
| static int uec_graceful_stop_tx(struct uec_priv *uec) |
| { |
| ucc_fast_t *uf_regs; |
| u32 cecr_subblock; |
| u32 ucce; |
| |
| uf_regs = uec->uccf->uf_regs; |
| |
| /* Clear the grace stop event */ |
| out_be32(&uf_regs->ucce, UCCE_GRA); |
| |
| /* Issue host command */ |
| cecr_subblock = |
| ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num); |
| qe_issue_cmd(QE_GRACEFUL_STOP_TX, cecr_subblock, |
| (u8)QE_CR_PROTOCOL_ETHERNET, 0); |
| |
| /* Wait for command to complete */ |
| do { |
| ucce = in_be32(&uf_regs->ucce); |
| } while (!(ucce & UCCE_GRA)); |
| |
| uec->grace_stopped_tx = 1; |
| |
| return 0; |
| } |
| |
| static int uec_graceful_stop_rx(struct uec_priv *uec) |
| { |
| u32 cecr_subblock; |
| u8 ack; |
| |
| if (!uec->p_rx_glbl_pram) { |
| printf("%s: No init rx global parameter\n", __func__); |
| return -EINVAL; |
| } |
| |
| /* Clear acknowledge bit */ |
| ack = uec->p_rx_glbl_pram->rxgstpack; |
| ack &= ~GRACEFUL_STOP_ACKNOWLEDGE_RX; |
| uec->p_rx_glbl_pram->rxgstpack = ack; |
| |
| /* Keep issuing cmd and checking ack bit until it is asserted */ |
| do { |
| /* Issue host command */ |
| cecr_subblock = |
| ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num); |
| qe_issue_cmd(QE_GRACEFUL_STOP_RX, cecr_subblock, |
| (u8)QE_CR_PROTOCOL_ETHERNET, 0); |
| ack = uec->p_rx_glbl_pram->rxgstpack; |
| } while (!(ack & GRACEFUL_STOP_ACKNOWLEDGE_RX)); |
| |
| uec->grace_stopped_rx = 1; |
| |
| return 0; |
| } |
| |
| static int uec_stop(struct uec_priv *uec, comm_dir_e mode) |
| { |
| /* check if the UCC number is in range. */ |
| if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) { |
| printf("%s: ucc_num out of range.\n", __func__); |
| return -EINVAL; |
| } |
| /* Stop any transmissions */ |
| if ((mode & COMM_DIR_TX) && !uec->grace_stopped_tx) |
| uec_graceful_stop_tx(uec); |
| |
| /* Stop any receptions */ |
| if ((mode & COMM_DIR_RX) && !uec->grace_stopped_rx) |
| uec_graceful_stop_rx(uec); |
| |
| /* Disable the UCC fast */ |
| ucc_fast_disable(uec->uccf, mode); |
| |
| /* Disable the MAC */ |
| uec_mac_disable(uec, mode); |
| |
| return 0; |
| } |
| |
| static void qe_uec_stop(struct udevice *dev) |
| { |
| struct qe_uec_priv *priv = dev_get_priv(dev); |
| struct uec_priv *uec = priv->uec; |
| |
| uec_stop(uec, COMM_DIR_RX_AND_TX); |
| } |
| |
| static int qe_uec_set_hwaddr(struct udevice *dev) |
| { |
| struct qe_uec_priv *priv = dev_get_priv(dev); |
| struct eth_pdata *pdata = dev_get_plat(dev); |
| struct uec_priv *uec = priv->uec; |
| uec_t *uec_regs = uec->uec_regs; |
| uchar *mac = pdata->enetaddr; |
| u32 mac_addr1; |
| u32 mac_addr2; |
| |
| /* |
| * if a station address of 0x12345678ABCD, perform a write to |
| * MACSTNADDR1 of 0xCDAB7856, |
| * MACSTNADDR2 of 0x34120000 |
| */ |
| |
| mac_addr1 = (mac[5] << 24) | (mac[4] << 16) | |
| (mac[3] << 8) | (mac[2]); |
| out_be32(&uec_regs->macstnaddr1, mac_addr1); |
| |
| mac_addr2 = ((mac[1] << 24) | (mac[0] << 16)) & 0xffff0000; |
| out_be32(&uec_regs->macstnaddr2, mac_addr2); |
| |
| return 0; |
| } |
| |
| static int qe_uec_free_pkt(struct udevice *dev, uchar *packet, int length) |
| { |
| if (packet) |
| free(packet); |
| |
| return 0; |
| } |
| |
| static const struct eth_ops qe_uec_eth_ops = { |
| .start = qe_uec_start, |
| .send = qe_uec_send, |
| .recv = qe_uec_recv, |
| .free_pkt = qe_uec_free_pkt, |
| .stop = qe_uec_stop, |
| .write_hwaddr = qe_uec_set_hwaddr, |
| }; |
| |
| static int uec_convert_threads_num(enum uec_num_of_threads threads_num, |
| int *threads_num_ret) |
| { |
| int num_threads_numerica; |
| |
| switch (threads_num) { |
| case UEC_NUM_OF_THREADS_1: |
| num_threads_numerica = 1; |
| break; |
| case UEC_NUM_OF_THREADS_2: |
| num_threads_numerica = 2; |
| break; |
| case UEC_NUM_OF_THREADS_4: |
| num_threads_numerica = 4; |
| break; |
| case UEC_NUM_OF_THREADS_6: |
| num_threads_numerica = 6; |
| break; |
| case UEC_NUM_OF_THREADS_8: |
| num_threads_numerica = 8; |
| break; |
| default: |
| printf("%s: Bad number of threads value.", |
| __func__); |
| return -EINVAL; |
| } |
| |
| *threads_num_ret = num_threads_numerica; |
| |
| return 0; |
| } |
| |
| static void uec_init_tx_parameter(struct uec_priv *uec, int num_threads_tx) |
| { |
| struct uec_inf *uec_info; |
| u32 end_bd; |
| u8 bmrx = 0; |
| int i; |
| |
| uec_info = uec->uec_info; |
| |
| /* Alloc global Tx parameter RAM page */ |
| uec->tx_glbl_pram_offset = |
| qe_muram_alloc(sizeof(struct uec_tx_global_pram), |
| UEC_TX_GLOBAL_PRAM_ALIGNMENT); |
| uec->p_tx_glbl_pram = (struct uec_tx_global_pram *) |
| qe_muram_addr(uec->tx_glbl_pram_offset); |
| |
| /* Zero the global Tx prameter RAM */ |
| memset(uec->p_tx_glbl_pram, 0, sizeof(struct uec_tx_global_pram)); |
| |
| /* Init global Tx parameter RAM */ |
| |
| /* TEMODER, RMON statistics disable, one Tx queue */ |
| out_be16(&uec->p_tx_glbl_pram->temoder, TEMODER_INIT_VALUE); |
| |
| /* SQPTR */ |
| uec->send_q_mem_reg_offset = |
| qe_muram_alloc(sizeof(struct uec_send_queue_qd), |
| UEC_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT); |
| uec->p_send_q_mem_reg = (struct uec_send_queue_mem_region *) |
| qe_muram_addr(uec->send_q_mem_reg_offset); |
| out_be32(&uec->p_tx_glbl_pram->sqptr, uec->send_q_mem_reg_offset); |
| |
| /* Setup the table with TxBDs ring */ |
| end_bd = (u32)uec->p_tx_bd_ring + (uec_info->tx_bd_ring_len - 1) |
| * SIZEOFBD; |
| out_be32(&uec->p_send_q_mem_reg->sqqd[0].bd_ring_base, |
| (u32)(uec->p_tx_bd_ring)); |
| out_be32(&uec->p_send_q_mem_reg->sqqd[0].last_bd_completed_address, |
| end_bd); |
| |
| /* Scheduler Base Pointer, we have only one Tx queue, no need it */ |
| out_be32(&uec->p_tx_glbl_pram->schedulerbasepointer, 0); |
| |
| /* TxRMON Base Pointer, TxRMON disable, we don't need it */ |
| out_be32(&uec->p_tx_glbl_pram->txrmonbaseptr, 0); |
| |
| /* TSTATE, global snooping, big endian, the CSB bus selected */ |
| bmrx = BMR_INIT_VALUE; |
| out_be32(&uec->p_tx_glbl_pram->tstate, ((u32)(bmrx) << BMR_SHIFT)); |
| |
| /* IPH_Offset */ |
| for (i = 0; i < MAX_IPH_OFFSET_ENTRY; i++) |
| out_8(&uec->p_tx_glbl_pram->iphoffset[i], 0); |
| |
| /* VTAG table */ |
| for (i = 0; i < UEC_TX_VTAG_TABLE_ENTRY_MAX; i++) |
| out_be32(&uec->p_tx_glbl_pram->vtagtable[i], 0); |
| |
| /* TQPTR */ |
| uec->thread_dat_tx_offset = |
| qe_muram_alloc(num_threads_tx * |
| sizeof(struct uec_thread_data_tx) + |
| 32 * (num_threads_tx == 1), |
| UEC_THREAD_DATA_ALIGNMENT); |
| |
| uec->p_thread_data_tx = (struct uec_thread_data_tx *) |
| qe_muram_addr(uec->thread_dat_tx_offset); |
| out_be32(&uec->p_tx_glbl_pram->tqptr, uec->thread_dat_tx_offset); |
| } |
| |
| static void uec_init_rx_parameter(struct uec_priv *uec, int num_threads_rx) |
| { |
| u8 bmrx = 0; |
| int i; |
| struct uec_82xx_add_filtering_pram *p_af_pram; |
| |
| /* Allocate global Rx parameter RAM page */ |
| uec->rx_glbl_pram_offset = |
| qe_muram_alloc(sizeof(struct uec_rx_global_pram), |
| UEC_RX_GLOBAL_PRAM_ALIGNMENT); |
| uec->p_rx_glbl_pram = (struct uec_rx_global_pram *) |
| qe_muram_addr(uec->rx_glbl_pram_offset); |
| |
| /* Zero Global Rx parameter RAM */ |
| memset(uec->p_rx_glbl_pram, 0, sizeof(struct uec_rx_global_pram)); |
| |
| /* Init global Rx parameter RAM */ |
| /* |
| * REMODER, Extended feature mode disable, VLAN disable, |
| * LossLess flow control disable, Receive firmware statisic disable, |
| * Extended address parsing mode disable, One Rx queues, |
| * Dynamic maximum/minimum frame length disable, IP checksum check |
| * disable, IP address alignment disable |
| */ |
| out_be32(&uec->p_rx_glbl_pram->remoder, REMODER_INIT_VALUE); |
| |
| /* RQPTR */ |
| uec->thread_dat_rx_offset = |
| qe_muram_alloc(num_threads_rx * |
| sizeof(struct uec_thread_data_rx), |
| UEC_THREAD_DATA_ALIGNMENT); |
| uec->p_thread_data_rx = (struct uec_thread_data_rx *) |
| qe_muram_addr(uec->thread_dat_rx_offset); |
| out_be32(&uec->p_rx_glbl_pram->rqptr, uec->thread_dat_rx_offset); |
| |
| /* Type_or_Len */ |
| out_be16(&uec->p_rx_glbl_pram->typeorlen, 3072); |
| |
| /* RxRMON base pointer, we don't need it */ |
| out_be32(&uec->p_rx_glbl_pram->rxrmonbaseptr, 0); |
| |
| /* IntCoalescingPTR, we don't need it, no interrupt */ |
| out_be32(&uec->p_rx_glbl_pram->intcoalescingptr, 0); |
| |
| /* RSTATE, global snooping, big endian, the CSB bus selected */ |
| bmrx = BMR_INIT_VALUE; |
| out_8(&uec->p_rx_glbl_pram->rstate, bmrx); |
| |
| /* MRBLR */ |
| out_be16(&uec->p_rx_glbl_pram->mrblr, MAX_RXBUF_LEN); |
| |
| /* RBDQPTR */ |
| uec->rx_bd_qs_tbl_offset = |
| qe_muram_alloc(sizeof(struct uec_rx_bd_queues_entry) + |
| sizeof(struct uec_rx_pref_bds), |
| UEC_RX_BD_QUEUES_ALIGNMENT); |
| uec->p_rx_bd_qs_tbl = (struct uec_rx_bd_queues_entry *) |
| qe_muram_addr(uec->rx_bd_qs_tbl_offset); |
| |
| /* Zero it */ |
| memset(uec->p_rx_bd_qs_tbl, 0, sizeof(struct uec_rx_bd_queues_entry) + |
| sizeof(struct uec_rx_pref_bds)); |
| out_be32(&uec->p_rx_glbl_pram->rbdqptr, uec->rx_bd_qs_tbl_offset); |
| out_be32(&uec->p_rx_bd_qs_tbl->externalbdbaseptr, |
| (u32)uec->p_rx_bd_ring); |
| |
| /* MFLR */ |
| out_be16(&uec->p_rx_glbl_pram->mflr, MAX_FRAME_LEN); |
| /* MINFLR */ |
| out_be16(&uec->p_rx_glbl_pram->minflr, MIN_FRAME_LEN); |
| /* MAXD1 */ |
| out_be16(&uec->p_rx_glbl_pram->maxd1, MAX_DMA1_LEN); |
| /* MAXD2 */ |
| out_be16(&uec->p_rx_glbl_pram->maxd2, MAX_DMA2_LEN); |
| /* ECAM_PTR */ |
| out_be32(&uec->p_rx_glbl_pram->ecamptr, 0); |
| /* L2QT */ |
| out_be32(&uec->p_rx_glbl_pram->l2qt, 0); |
| /* L3QT */ |
| for (i = 0; i < 8; i++) |
| out_be32(&uec->p_rx_glbl_pram->l3qt[i], 0); |
| |
| /* VLAN_TYPE */ |
| out_be16(&uec->p_rx_glbl_pram->vlantype, 0x8100); |
| /* TCI */ |
| out_be16(&uec->p_rx_glbl_pram->vlantci, 0); |
| |
| /* Clear PQ2 style address filtering hash table */ |
| p_af_pram = (struct uec_82xx_add_filtering_pram *) |
| uec->p_rx_glbl_pram->addressfiltering; |
| |
| p_af_pram->iaddr_h = 0; |
| p_af_pram->iaddr_l = 0; |
| p_af_pram->gaddr_h = 0; |
| p_af_pram->gaddr_l = 0; |
| } |
| |
| static int uec_issue_init_enet_rxtx_cmd(struct uec_priv *uec, |
| int thread_tx, int thread_rx) |
| { |
| struct uec_init_cmd_pram *p_init_enet_param; |
| u32 init_enet_param_offset; |
| struct uec_inf *uec_info; |
| struct ucc_fast_inf *uf_info; |
| int i; |
| int snum; |
| u32 off; |
| u32 entry_val; |
| u32 command; |
| u32 cecr_subblock; |
| |
| uec_info = uec->uec_info; |
| uf_info = &uec_info->uf_info; |
| |
| /* Allocate init enet command parameter */ |
| uec->init_enet_param_offset = |
| qe_muram_alloc(sizeof(struct uec_init_cmd_pram), 4); |
| init_enet_param_offset = uec->init_enet_param_offset; |
| uec->p_init_enet_param = (struct uec_init_cmd_pram *) |
| qe_muram_addr(uec->init_enet_param_offset); |
| |
| /* Zero init enet command struct */ |
| memset((void *)uec->p_init_enet_param, 0, |
| sizeof(struct uec_init_cmd_pram)); |
| |
| /* Init the command struct */ |
| p_init_enet_param = uec->p_init_enet_param; |
| p_init_enet_param->resinit0 = ENET_INIT_PARAM_MAGIC_RES_INIT0; |
| p_init_enet_param->resinit1 = ENET_INIT_PARAM_MAGIC_RES_INIT1; |
| p_init_enet_param->resinit2 = ENET_INIT_PARAM_MAGIC_RES_INIT2; |
| p_init_enet_param->resinit3 = ENET_INIT_PARAM_MAGIC_RES_INIT3; |
| p_init_enet_param->resinit4 = ENET_INIT_PARAM_MAGIC_RES_INIT4; |
| p_init_enet_param->largestexternallookupkeysize = 0; |
| |
| p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_rx) |
| << ENET_INIT_PARAM_RGF_SHIFT; |
| p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_tx) |
| << ENET_INIT_PARAM_TGF_SHIFT; |
| |
| /* Init Rx global parameter pointer */ |
| p_init_enet_param->rgftgfrxglobal |= uec->rx_glbl_pram_offset | |
| (u32)uec_info->risc_rx; |
| |
| /* Init Rx threads */ |
| for (i = 0; i < (thread_rx + 1); i++) { |
| snum = qe_get_snum(); |
| if (snum < 0) { |
| printf("%s can not get snum\n", __func__); |
| return -ENOMEM; |
| } |
| |
| if (i == 0) { |
| off = 0; |
| } else { |
| off = qe_muram_alloc(sizeof(struct uec_thread_rx_pram), |
| UEC_THREAD_RX_PRAM_ALIGNMENT); |
| } |
| |
| entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) | |
| off | (u32)uec_info->risc_rx; |
| p_init_enet_param->rxthread[i] = entry_val; |
| } |
| |
| /* Init Tx global parameter pointer */ |
| p_init_enet_param->txglobal = uec->tx_glbl_pram_offset | |
| (u32)uec_info->risc_tx; |
| |
| /* Init Tx threads */ |
| for (i = 0; i < thread_tx; i++) { |
| snum = qe_get_snum(); |
| if (snum < 0) { |
| printf("%s can not get snum\n", __func__); |
| return -ENOMEM; |
| } |
| |
| off = qe_muram_alloc(sizeof(struct uec_thread_tx_pram), |
| UEC_THREAD_TX_PRAM_ALIGNMENT); |
| |
| entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) | |
| off | (u32)uec_info->risc_tx; |
| p_init_enet_param->txthread[i] = entry_val; |
| } |
| |
| __asm__ __volatile__("sync"); |
| |
| /* Issue QE command */ |
| command = QE_INIT_TX_RX; |
| cecr_subblock = ucc_fast_get_qe_cr_subblock(uf_info->ucc_num); |
| qe_issue_cmd(command, cecr_subblock, (u8)QE_CR_PROTOCOL_ETHERNET, |
| init_enet_param_offset); |
| |
| return 0; |
| } |
| |
| static int uec_startup(struct udevice *dev) |
| { |
| struct qe_uec_priv *priv = dev_get_priv(dev); |
| struct uec_priv *uec = priv->uec; |
| struct uec_inf *uec_info; |
| struct ucc_fast_inf *uf_info; |
| struct ucc_fast_priv *uccf; |
| ucc_fast_t *uf_regs; |
| uec_t *uec_regs; |
| int num_threads_tx; |
| int num_threads_rx; |
| u32 utbipar; |
| u32 length; |
| u32 align; |
| struct buffer_descriptor *bd; |
| u8 *buf; |
| int i; |
| |
| uec_info = uec->uec_info; |
| uf_info = &uec_info->uf_info; |
| |
| /* Check if Rx BD ring len is illegal */ |
| if (uec_info->rx_bd_ring_len < UEC_RX_BD_RING_SIZE_MIN || |
| uec_info->rx_bd_ring_len % UEC_RX_BD_RING_SIZE_ALIGNMENT) { |
| printf("%s: Rx BD ring len must be multiple of 4, and > 8.\n", |
| __func__); |
| return -EINVAL; |
| } |
| |
| /* Check if Tx BD ring len is illegal */ |
| if (uec_info->tx_bd_ring_len < UEC_TX_BD_RING_SIZE_MIN) { |
| printf("%s: Tx BD ring length must not be smaller than 2.\n", |
| __func__); |
| return -EINVAL; |
| } |
| |
| /* Check if MRBLR is illegal */ |
| if (MAX_RXBUF_LEN == 0 || (MAX_RXBUF_LEN % UEC_MRBLR_ALIGNMENT)) { |
| printf("%s: max rx buffer length must be mutliple of 128.\n", |
| __func__); |
| return -EINVAL; |
| } |
| |
| /* Both Rx and Tx are stopped */ |
| uec->grace_stopped_rx = 1; |
| uec->grace_stopped_tx = 1; |
| |
| /* Init UCC fast */ |
| if (ucc_fast_init(uf_info, &uccf)) { |
| printf("%s: failed to init ucc fast\n", __func__); |
| return -ENOMEM; |
| } |
| |
| /* Save uccf */ |
| uec->uccf = uccf; |
| |
| /* Convert the Tx threads number */ |
| if (uec_convert_threads_num(uec_info->num_threads_tx, |
| &num_threads_tx)) |
| return -EINVAL; |
| |
| /* Convert the Rx threads number */ |
| if (uec_convert_threads_num(uec_info->num_threads_rx, |
| &num_threads_rx)) |
| return -EINVAL; |
| |
| uf_regs = uccf->uf_regs; |
| |
| /* UEC register is following UCC fast registers */ |
| uec_regs = (uec_t *)(&uf_regs->ucc_eth); |
| |
| /* Save the UEC register pointer to UEC private struct */ |
| uec->uec_regs = uec_regs; |
| |
| /* Init UPSMR, enable hardware statistics (UCC) */ |
| out_be32(&uec->uccf->uf_regs->upsmr, UPSMR_INIT_VALUE); |
| |
| /* Init MACCFG1, flow control disable, disable Tx and Rx */ |
| out_be32(&uec_regs->maccfg1, MACCFG1_INIT_VALUE); |
| |
| /* Init MACCFG2, length check, MAC PAD and CRC enable */ |
| out_be32(&uec_regs->maccfg2, MACCFG2_INIT_VALUE); |
| |
| /* Setup UTBIPAR */ |
| utbipar = in_be32(&uec_regs->utbipar); |
| utbipar &= ~UTBIPAR_PHY_ADDRESS_MASK; |
| |
| /* Initialize UTBIPAR address to CONFIG_UTBIPAR_INIT_TBIPA for ALL UEC. |
| * This frees up the remaining SMI addresses for use. |
| */ |
| utbipar |= CONFIG_UTBIPAR_INIT_TBIPA << UTBIPAR_PHY_ADDRESS_SHIFT; |
| out_be32(&uec_regs->utbipar, utbipar); |
| |
| /* Allocate Tx BDs */ |
| length = ((uec_info->tx_bd_ring_len * SIZEOFBD) / |
| UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) * |
| UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT; |
| if ((uec_info->tx_bd_ring_len * SIZEOFBD) % |
| UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) |
| length += UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT; |
| |
| align = UEC_TX_BD_RING_ALIGNMENT; |
| uec->tx_bd_ring_offset = (u32)malloc((u32)(length + align)); |
| if (uec->tx_bd_ring_offset != 0) |
| uec->p_tx_bd_ring = (u8 *)((uec->tx_bd_ring_offset + align) |
| & ~(align - 1)); |
| |
| /* Zero all of Tx BDs */ |
| memset((void *)(uec->tx_bd_ring_offset), 0, length + align); |
| |
| /* Allocate Rx BDs */ |
| length = uec_info->rx_bd_ring_len * SIZEOFBD; |
| align = UEC_RX_BD_RING_ALIGNMENT; |
| uec->rx_bd_ring_offset = (u32)(malloc((u32)(length + align))); |
| if (uec->rx_bd_ring_offset != 0) |
| uec->p_rx_bd_ring = (u8 *)((uec->rx_bd_ring_offset + align) |
| & ~(align - 1)); |
| |
| /* Zero all of Rx BDs */ |
| memset((void *)(uec->rx_bd_ring_offset), 0, length + align); |
| |
| /* Allocate Rx buffer */ |
| length = uec_info->rx_bd_ring_len * MAX_RXBUF_LEN; |
| align = UEC_RX_DATA_BUF_ALIGNMENT; |
| uec->rx_buf_offset = (u32)malloc(length + align); |
| if (uec->rx_buf_offset != 0) |
| uec->p_rx_buf = (u8 *)((uec->rx_buf_offset + align) |
| & ~(align - 1)); |
| |
| /* Zero all of the Rx buffer */ |
| memset((void *)(uec->rx_buf_offset), 0, length + align); |
| |
| /* Init TxBD ring */ |
| bd = (struct buffer_descriptor *)uec->p_tx_bd_ring; |
| uec->tx_bd = bd; |
| |
| for (i = 0; i < uec_info->tx_bd_ring_len; i++) { |
| BD_DATA_CLEAR(bd); |
| BD_STATUS_SET(bd, 0); |
| BD_LENGTH_SET(bd, 0); |
| bd++; |
| } |
| BD_STATUS_SET((--bd), TX_BD_WRAP); |
| |
| /* Init RxBD ring */ |
| bd = (struct buffer_descriptor *)uec->p_rx_bd_ring; |
| uec->rx_bd = bd; |
| buf = uec->p_rx_buf; |
| for (i = 0; i < uec_info->rx_bd_ring_len; i++) { |
| BD_DATA_SET(bd, buf); |
| BD_LENGTH_SET(bd, 0); |
| BD_STATUS_SET(bd, RX_BD_EMPTY); |
| buf += MAX_RXBUF_LEN; |
| bd++; |
| } |
| BD_STATUS_SET((--bd), RX_BD_WRAP | RX_BD_EMPTY); |
| |
| /* Init global Tx parameter RAM */ |
| uec_init_tx_parameter(uec, num_threads_tx); |
| |
| /* Init global Rx parameter RAM */ |
| uec_init_rx_parameter(uec, num_threads_rx); |
| |
| /* Init ethernet Tx and Rx parameter command */ |
| if (uec_issue_init_enet_rxtx_cmd(uec, num_threads_tx, |
| num_threads_rx)) { |
| printf("%s issue init enet cmd failed\n", __func__); |
| return -ENOMEM; |
| } |
| return 0; |
| } |
| |
| /* Convert a string to a QE clock source enum |
| * |
| * This function takes a string, typically from a property in the device |
| * tree, and returns the corresponding "enum qe_clock" value. |
| */ |
| enum qe_clock qe_clock_source(const char *source) |
| { |
| unsigned int i; |
| |
| if (strcasecmp(source, "none") == 0) |
| return QE_CLK_NONE; |
| |
| if (strncasecmp(source, "brg", 3) == 0) { |
| i = simple_strtoul(source + 3, NULL, 10); |
| if (i >= 1 && i <= 16) |
| return (QE_BRG1 - 1) + i; |
| else |
| return QE_CLK_DUMMY; |
| } |
| |
| if (strncasecmp(source, "clk", 3) == 0) { |
| i = simple_strtoul(source + 3, NULL, 10); |
| if (i >= 1 && i <= 24) |
| return (QE_CLK1 - 1) + i; |
| else |
| return QE_CLK_DUMMY; |
| } |
| |
| return QE_CLK_DUMMY; |
| } |
| |
| static void qe_uec_set_eth_type(struct udevice *dev) |
| { |
| struct qe_uec_priv *priv = dev_get_priv(dev); |
| struct uec_priv *uec = priv->uec; |
| struct uec_inf *uec_info = uec->uec_info; |
| struct ucc_fast_inf *uf_info = &uec_info->uf_info; |
| |
| switch (uec_info->enet_interface_type) { |
| case PHY_INTERFACE_MODE_GMII: |
| case PHY_INTERFACE_MODE_RGMII: |
| case PHY_INTERFACE_MODE_RGMII_ID: |
| case PHY_INTERFACE_MODE_RGMII_RXID: |
| case PHY_INTERFACE_MODE_RGMII_TXID: |
| case PHY_INTERFACE_MODE_TBI: |
| case PHY_INTERFACE_MODE_RTBI: |
| case PHY_INTERFACE_MODE_SGMII: |
| uf_info->eth_type = GIGA_ETH; |
| break; |
| default: |
| uf_info->eth_type = FAST_ETH; |
| break; |
| } |
| } |
| |
| static int qe_uec_set_uec_info(struct udevice *dev) |
| { |
| struct qe_uec_priv *priv = dev_get_priv(dev); |
| struct eth_pdata *pdata = dev_get_plat(dev); |
| struct uec_priv *uec = priv->uec; |
| struct uec_inf *uec_info; |
| struct ucc_fast_inf *uf_info; |
| const char *s; |
| int ret; |
| u32 val; |
| |
| uec_info = (struct uec_inf *)malloc(sizeof(struct uec_inf)); |
| if (!uec_info) |
| return -ENOMEM; |
| |
| uf_info = &uec_info->uf_info; |
| |
| ret = dev_read_u32(dev, "cell-index", &val); |
| if (ret) { |
| ret = dev_read_u32(dev, "device-id", &val); |
| if (ret) { |
| pr_err("no cell-index nor device-id found!"); |
| goto out; |
| } |
| } |
| |
| uf_info->ucc_num = val - 1; |
| if (uf_info->ucc_num < 0 || uf_info->ucc_num > 7) { |
| ret = -ENODEV; |
| goto out; |
| } |
| |
| ret = dev_read_string_index(dev, "rx-clock-name", 0, &s); |
| if (!ret) { |
| uf_info->rx_clock = qe_clock_source(s); |
| if (uf_info->rx_clock < QE_CLK_NONE || |
| uf_info->rx_clock > QE_CLK24) { |
| pr_err("invalid rx-clock-name property\n"); |
| ret = -EINVAL; |
| goto out; |
| } |
| } else { |
| ret = dev_read_u32(dev, "rx-clock", &val); |
| if (ret) { |
| /* |
| * If both rx-clock-name and rx-clock are missing, |
| * we want to tell people to use rx-clock-name. |
| */ |
| pr_err("missing rx-clock-name property\n"); |
| goto out; |
| } |
| if (val < QE_CLK_NONE || val > QE_CLK24) { |
| pr_err("invalid rx-clock property\n"); |
| ret = -EINVAL; |
| goto out; |
| } |
| uf_info->rx_clock = val; |
| } |
| |
| ret = dev_read_string_index(dev, "tx-clock-name", 0, &s); |
| if (!ret) { |
| uf_info->tx_clock = qe_clock_source(s); |
| if (uf_info->tx_clock < QE_CLK_NONE || |
| uf_info->tx_clock > QE_CLK24) { |
| pr_err("invalid tx-clock-name property\n"); |
| ret = -EINVAL; |
| goto out; |
| } |
| } else { |
| ret = dev_read_u32(dev, "tx-clock", &val); |
| if (ret) { |
| pr_err("missing tx-clock-name property\n"); |
| goto out; |
| } |
| if (val < QE_CLK_NONE || val > QE_CLK24) { |
| pr_err("invalid tx-clock property\n"); |
| ret = -EINVAL; |
| goto out; |
| } |
| uf_info->tx_clock = val; |
| } |
| |
| uec_info->num_threads_tx = UEC_NUM_OF_THREADS_1; |
| uec_info->num_threads_rx = UEC_NUM_OF_THREADS_1; |
| uec_info->risc_tx = QE_RISC_ALLOCATION_RISC1_AND_RISC2; |
| uec_info->risc_rx = QE_RISC_ALLOCATION_RISC1_AND_RISC2; |
| uec_info->tx_bd_ring_len = 16; |
| uec_info->rx_bd_ring_len = 16; |
| #if (MAX_QE_RISC == 4) |
| uec_info->risc_tx = QE_RISC_ALLOCATION_FOUR_RISCS; |
| uec_info->risc_rx = QE_RISC_ALLOCATION_FOUR_RISCS; |
| #endif |
| |
| uec_info->enet_interface_type = pdata->phy_interface; |
| |
| uec->uec_info = uec_info; |
| qe_uec_set_eth_type(dev); |
| |
| return 0; |
| out: |
| free(uec_info); |
| return ret; |
| } |
| |
| static int qe_uec_probe(struct udevice *dev) |
| { |
| struct qe_uec_priv *priv = dev_get_priv(dev); |
| struct eth_pdata *pdata = dev_get_plat(dev); |
| struct uec_priv *uec; |
| int ret; |
| |
| /* Allocate the UEC private struct */ |
| uec = (struct uec_priv *)malloc(sizeof(struct uec_priv)); |
| if (!uec) |
| return -ENOMEM; |
| |
| memset(uec, 0, sizeof(struct uec_priv)); |
| priv->uec = uec; |
| uec->uec_regs = (uec_t *)pdata->iobase; |
| |
| /* setup uec info struct */ |
| ret = qe_uec_set_uec_info(dev); |
| if (ret) { |
| free(uec); |
| return ret; |
| } |
| |
| ret = uec_startup(dev); |
| if (ret) { |
| free(uec->uec_info); |
| free(uec); |
| return ret; |
| } |
| |
| priv->phydev = dm_eth_phy_connect(dev); |
| return 0; |
| } |
| |
| /* |
| * Remove the driver from an interface: |
| * - free up allocated memory |
| */ |
| static int qe_uec_remove(struct udevice *dev) |
| { |
| struct qe_uec_priv *priv = dev_get_priv(dev); |
| |
| free(priv->uec); |
| return 0; |
| } |
| |
| static int qe_uec_of_to_plat(struct udevice *dev) |
| { |
| struct eth_pdata *pdata = dev_get_plat(dev); |
| const char *phy_mode; |
| |
| pdata->iobase = (phys_addr_t)devfdt_get_addr(dev); |
| |
| pdata->phy_interface = -1; |
| phy_mode = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), |
| "phy-connection-type", NULL); |
| if (phy_mode) |
| pdata->phy_interface = phy_get_interface_by_name(phy_mode); |
| if (pdata->phy_interface == -1) { |
| debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static const struct udevice_id qe_uec_ids[] = { |
| { .compatible = QE_UEC_DRIVER_NAME }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(eth_qe_uec) = { |
| .name = QE_UEC_DRIVER_NAME, |
| .id = UCLASS_ETH, |
| .of_match = qe_uec_ids, |
| .of_to_plat = qe_uec_of_to_plat, |
| .probe = qe_uec_probe, |
| .remove = qe_uec_remove, |
| .ops = &qe_uec_eth_ops, |
| .priv_auto = sizeof(struct qe_uec_priv), |
| .plat_auto = sizeof(struct eth_pdata), |
| }; |