board/freescale/p1_p2_rdb_pc/ddr.c - filogic/uboot - Gitiles

 // SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright 2010-2011 Freescale Semiconductor, Inc.
  */

 #include <common.h>
 #include <vsprintf.h>
 #include <asm/mmu.h>
 #include <asm/immap_85xx.h>
 #include <asm/processor.h>
 #include <fsl_ddr_sdram.h>
 #include <fsl_ddr_dimm_params.h>
 #include <asm/io.h>
 #include <asm/fsl_law.h>

 #ifdef CONFIG_SYS_DDR_RAW_TIMING
 #if	defined(CONFIG_P1020RDB_PROTO)
 /* Micron MT41J256M8_187E */
 dimm_params_t ddr_raw_timing = {
 	.n_ranks = 1,
 	.rank_density = 1073741824u,
 	.capacity = 1073741824u,
 	.primary_sdram_width = 32,
 	.ec_sdram_width = 0,
 	.registered_dimm = 0,
 	.mirrored_dimm = 0,
 	.n_row_addr = 15,
 	.n_col_addr = 10,
 	.n_banks_per_sdram_device = 8,
 	.edc_config = 0,
 	.burst_lengths_bitmask = 0x0c,

 	.tckmin_x_ps = 1870,
 	.caslat_x = 0x1e << 4,	/* 5,6,7,8 */
 	.taa_ps = 13125,
 	.twr_ps = 15000,
 	.trcd_ps = 13125,
 	.trrd_ps = 7500,
 	.trp_ps = 13125,
 	.tras_ps = 37500,
 	.trc_ps = 50625,
 	.trfc_ps = 160000,
 	.twtr_ps = 7500,
 	.trtp_ps = 7500,
 	.refresh_rate_ps = 7800000,
 	.tfaw_ps = 37500,
 };
 #elif defined(CONFIG_TARGET_P2020RDB)
 /* Micron MT41J128M16_15E */
 dimm_params_t ddr_raw_timing = {
 	.n_ranks = 1,
 	.rank_density = 1073741824u,
 	.capacity = 1073741824u,
 	.primary_sdram_width = 64,
 	.ec_sdram_width = 0,
 	.registered_dimm = 0,
 	.mirrored_dimm = 0,
 	.n_row_addr = 14,
 	.n_col_addr = 10,
 	.n_banks_per_sdram_device = 8,
 	.edc_config = 0,
 	.burst_lengths_bitmask = 0x0c,

 	.tckmin_x_ps = 1500,
 	.caslat_x = 0x7e << 4,	/* 5,6,7,8,9,10 */
 	.taa_ps = 13500,
 	.twr_ps = 15000,
 	.trcd_ps = 13500,
 	.trrd_ps = 6000,
 	.trp_ps = 13500,
 	.tras_ps = 36000,
 	.trc_ps = 49500,
 	.trfc_ps = 160000,
 	.twtr_ps = 7500,
 	.trtp_ps = 7500,
 	.refresh_rate_ps = 7800000,
 	.tfaw_ps = 30000,
 };
 #elif (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD))
 /* Micron MT41J512M8_187E */
 dimm_params_t ddr_raw_timing = {
 	.n_ranks = 2,
 	.rank_density = 1073741824u,
 	.capacity = 2147483648u,
 	.primary_sdram_width = 32,
 	.ec_sdram_width = 0,
 	.registered_dimm = 0,
 	.mirrored_dimm = 0,
 	.n_row_addr = 15,
 	.n_col_addr = 10,
 	.n_banks_per_sdram_device = 8,
 	.edc_config = 0,
 	.burst_lengths_bitmask = 0x0c,

 	.tckmin_x_ps = 1870,
 	.caslat_x = 0x1e << 4,	/* 5,6,7,8 */
 	.taa_ps = 13125,
 	.twr_ps = 15000,
 	.trcd_ps = 13125,
 	.trrd_ps = 7500,
 	.trp_ps = 13125,
 	.tras_ps = 37500,
 	.trc_ps = 50625,
 	.trfc_ps = 160000,
 	.twtr_ps = 7500,
 	.trtp_ps = 7500,
 	.refresh_rate_ps = 7800000,
 	.tfaw_ps = 37500,
 };
 #elif defined(CONFIG_TARGET_P1020RDB_PC)
 /*
  * Samsung K4B2G0846C-HCF8
  * The following timing are for "downshift"
  * i.e. to use CL9 part as CL7
  * otherwise, tAA, tRCD, tRP will be 13500ps
  * and tRC will be 49500ps
  */
 dimm_params_t ddr_raw_timing = {
 	.n_ranks = 1,
 	.rank_density = 1073741824u,
 	.capacity = 1073741824u,
 	.primary_sdram_width = 32,
 	.ec_sdram_width = 0,
 	.registered_dimm = 0,
 	.mirrored_dimm = 0,
 	.n_row_addr = 15,
 	.n_col_addr = 10,
 	.n_banks_per_sdram_device = 8,
 	.edc_config = 0,
 	.burst_lengths_bitmask = 0x0c,

 	.tckmin_x_ps = 1875,
 	.caslat_x = 0x1e << 4,	/* 5,6,7,8 */
 	.taa_ps = 13125,
 	.twr_ps = 15000,
 	.trcd_ps = 13125,
 	.trrd_ps = 7500,
 	.trp_ps = 13125,
 	.tras_ps = 37500,
 	.trc_ps = 50625,
 	.trfc_ps = 160000,
 	.twtr_ps = 7500,
 	.trtp_ps = 7500,
 	.refresh_rate_ps = 7800000,
 	.tfaw_ps = 37500,
 };
 #elif	defined(CONFIG_TARGET_P1024RDB)
 /*
  * Samsung K4B2G0846C-HCH9
  * The following timing are for "downshift"
  * i.e. to use CL9 part as CL7
  * otherwise, tAA, tRCD, tRP will be 13500ps
  * and tRC will be 49500ps
  */
 dimm_params_t ddr_raw_timing = {
 	.n_ranks = 1,
 	.rank_density = 1073741824u,
 	.capacity = 1073741824u,
 	.primary_sdram_width = 32,
 	.ec_sdram_width = 0,
 	.registered_dimm = 0,
 	.mirrored_dimm = 0,
 	.n_row_addr = 15,
 	.n_col_addr = 10,
 	.n_banks_per_sdram_device = 8,
 	.edc_config = 0,
 	.burst_lengths_bitmask = 0x0c,

 	.tckmin_x_ps = 1500,
 	.caslat_x = 0x3e << 4,	/* 5,6,7,8,9 */
 	.taa_ps = 13125,
 	.twr_ps = 15000,
 	.trcd_ps = 13125,
 	.trrd_ps = 6000,
 	.trp_ps = 13125,
 	.tras_ps = 36000,
 	.trc_ps = 49125,
 	.trfc_ps = 160000,
 	.twtr_ps = 7500,
 	.trtp_ps = 7500,
 	.refresh_rate_ps = 7800000,
 	.tfaw_ps = 30000,
 };
 #else
 #error Missing raw timing data for this board
 #endif

 int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
 		unsigned int controller_number,
 		unsigned int dimm_number)
 {
 	const char dimm_model[] = "Fixed DDR on board";

 	if ((controller_number == 0) && (dimm_number == 0)) {
 		memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
 		memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
 		memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
 	}

 	return 0;
 }
 #endif /* CONFIG_SYS_DDR_RAW_TIMING */

 #ifdef CFG_SYS_DDR_CS0_BNDS
 /* Fixed sdram init -- doesn't use serial presence detect. */
 phys_size_t fixed_sdram(void)
 {
 	sys_info_t sysinfo;
 	char buf[32];
 	size_t ddr_size;
 	fsl_ddr_cfg_regs_t ddr_cfg_regs = {
 		.cs[0].bnds = CFG_SYS_DDR_CS0_BNDS,
 		.cs[0].config = CFG_SYS_DDR_CS0_CONFIG,
 		.cs[0].config_2 = CFG_SYS_DDR_CS0_CONFIG_2,
 #if CONFIG_CHIP_SELECTS_PER_CTRL > 1
 		.cs[1].bnds = CFG_SYS_DDR_CS1_BNDS,
 		.cs[1].config = CFG_SYS_DDR_CS1_CONFIG,
 		.cs[1].config_2 = CFG_SYS_DDR_CS1_CONFIG_2,
 #endif
 		.timing_cfg_3 = CFG_SYS_DDR_TIMING_3,
 		.timing_cfg_0 = CFG_SYS_DDR_TIMING_0,
 		.timing_cfg_1 = CFG_SYS_DDR_TIMING_1,
 		.timing_cfg_2 = CFG_SYS_DDR_TIMING_2,
 		.ddr_sdram_cfg = CFG_SYS_DDR_CONTROL,
 		.ddr_sdram_cfg_2 = CFG_SYS_DDR_CONTROL_2,
 		.ddr_sdram_mode = CFG_SYS_DDR_MODE_1,
 		.ddr_sdram_mode_2 = CFG_SYS_DDR_MODE_2,
 		.ddr_sdram_md_cntl = CFG_SYS_DDR_MODE_CONTROL,
 		.ddr_sdram_interval = CFG_SYS_DDR_INTERVAL,
 		.ddr_data_init = 0xdeadbeef, /* Poison value */
 		.ddr_sdram_clk_cntl = CFG_SYS_DDR_CLK_CTRL,
 		.ddr_init_addr = CFG_SYS_DDR_INIT_ADDR,
 		.ddr_init_ext_addr = CFG_SYS_DDR_INIT_EXT_ADDR,
 		.timing_cfg_4 = CFG_SYS_DDR_TIMING_4,
 		.timing_cfg_5 = CFG_SYS_DDR_TIMING_5,
 		.ddr_zq_cntl = CFG_SYS_DDR_ZQ_CONTROL,
 		.ddr_wrlvl_cntl = CFG_SYS_DDR_WRLVL_CONTROL,
 		.ddr_sr_cntr = CFG_SYS_DDR_SR_CNTR,
 		.ddr_sdram_rcw_1 = CFG_SYS_DDR_RCW_1,
 		.ddr_sdram_rcw_2 = CFG_SYS_DDR_RCW_2
 	};

 	get_sys_info(&sysinfo);
 	printf("Configuring DDR for %s MT/s data rate\n",
 			strmhz(buf, sysinfo.freq_ddrbus));

 	ddr_size = CFG_SYS_SDRAM_SIZE * 1024 * 1024;

 	fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0);

 	if (set_ddr_laws(CFG_SYS_DDR_SDRAM_BASE,
 				ddr_size, LAW_TRGT_IF_DDR_1) < 0) {
 		printf("ERROR setting Local Access Windows for DDR\n");
 		return 0;
 	};

 	return ddr_size;
 }
 #endif

 void fsl_ddr_board_options(memctl_options_t *popts,
 				dimm_params_t *pdimm,
 				unsigned int ctrl_num)
 {
 	int i;
 	popts->clk_adjust = 6;
 	popts->cpo_override = 0x1f;
 	popts->write_data_delay = 2;
 	popts->half_strength_driver_enable = 1;
 	/* Write leveling override */
 	popts->wrlvl_en = 1;
 	popts->wrlvl_override = 1;
 	popts->wrlvl_sample = 0xf;
 	popts->wrlvl_start = 0x8;
 	popts->trwt_override = 1;
 	popts->trwt = 0;

 	if (pdimm->primary_sdram_width == 64)
 		popts->data_bus_width = 0;
 	else if (pdimm->primary_sdram_width == 32)
 		popts->data_bus_width = 1;
 	else
 		printf("Error in DDR bus width configuration!\n");

 	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
 		popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
 		popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
 	}
 }
	// SPDX-License-Identifier: GPL-2.0
	/*
	* Copyright 2010-2011 Freescale Semiconductor, Inc.
	*/

	#include <common.h>
	#include <vsprintf.h>
	#include <asm/mmu.h>
	#include <asm/immap_85xx.h>
	#include <asm/processor.h>
	#include <fsl_ddr_sdram.h>
	#include <fsl_ddr_dimm_params.h>
	#include <asm/io.h>
	#include <asm/fsl_law.h>

	#ifdef CONFIG_SYS_DDR_RAW_TIMING
	#if defined(CONFIG_P1020RDB_PROTO)
	/* Micron MT41J256M8_187E */
	dimm_params_t ddr_raw_timing = {
	.n_ranks = 1,
	.rank_density = 1073741824u,
	.capacity = 1073741824u,
	.primary_sdram_width = 32,
	.ec_sdram_width = 0,
	.registered_dimm = 0,
	.mirrored_dimm = 0,
	.n_row_addr = 15,
	.n_col_addr = 10,
	.n_banks_per_sdram_device = 8,
	.edc_config = 0,
	.burst_lengths_bitmask = 0x0c,

	.tckmin_x_ps = 1870,
	.caslat_x = 0x1e << 4, /* 5,6,7,8 */
	.taa_ps = 13125,
	.twr_ps = 15000,
	.trcd_ps = 13125,
	.trrd_ps = 7500,
	.trp_ps = 13125,
	.tras_ps = 37500,
	.trc_ps = 50625,
	.trfc_ps = 160000,
	.twtr_ps = 7500,
	.trtp_ps = 7500,
	.refresh_rate_ps = 7800000,
	.tfaw_ps = 37500,
	};
	#elif defined(CONFIG_TARGET_P2020RDB)
	/* Micron MT41J128M16_15E */
	dimm_params_t ddr_raw_timing = {
	.n_ranks = 1,
	.rank_density = 1073741824u,
	.capacity = 1073741824u,
	.primary_sdram_width = 64,
	.ec_sdram_width = 0,
	.registered_dimm = 0,
	.mirrored_dimm = 0,
	.n_row_addr = 14,
	.n_col_addr = 10,
	.n_banks_per_sdram_device = 8,
	.edc_config = 0,
	.burst_lengths_bitmask = 0x0c,

	.tckmin_x_ps = 1500,
	.caslat_x = 0x7e << 4, /* 5,6,7,8,9,10 */
	.taa_ps = 13500,
	.twr_ps = 15000,
	.trcd_ps = 13500,
	.trrd_ps = 6000,
	.trp_ps = 13500,
	.tras_ps = 36000,
	.trc_ps = 49500,
	.trfc_ps = 160000,
	.twtr_ps = 7500,
	.trtp_ps = 7500,
	.refresh_rate_ps = 7800000,
	.tfaw_ps = 30000,
	};
	#elif (defined(CONFIG_TARGET_P1020MBG) \|\| defined(CONFIG_TARGET_P1020RDB_PD))
	/* Micron MT41J512M8_187E */
	dimm_params_t ddr_raw_timing = {
	.n_ranks = 2,
	.rank_density = 1073741824u,
	.capacity = 2147483648u,
	.primary_sdram_width = 32,
	.ec_sdram_width = 0,
	.registered_dimm = 0,
	.mirrored_dimm = 0,
	.n_row_addr = 15,
	.n_col_addr = 10,
	.n_banks_per_sdram_device = 8,
	.edc_config = 0,
	.burst_lengths_bitmask = 0x0c,

	.tckmin_x_ps = 1870,
	.caslat_x = 0x1e << 4, /* 5,6,7,8 */
	.taa_ps = 13125,
	.twr_ps = 15000,
	.trcd_ps = 13125,
	.trrd_ps = 7500,
	.trp_ps = 13125,
	.tras_ps = 37500,
	.trc_ps = 50625,
	.trfc_ps = 160000,
	.twtr_ps = 7500,
	.trtp_ps = 7500,
	.refresh_rate_ps = 7800000,
	.tfaw_ps = 37500,
	};
	#elif defined(CONFIG_TARGET_P1020RDB_PC)
	/*
	* Samsung K4B2G0846C-HCF8
	* The following timing are for "downshift"
	* i.e. to use CL9 part as CL7
	* otherwise, tAA, tRCD, tRP will be 13500ps
	* and tRC will be 49500ps
	*/
	dimm_params_t ddr_raw_timing = {
	.n_ranks = 1,
	.rank_density = 1073741824u,
	.capacity = 1073741824u,
	.primary_sdram_width = 32,
	.ec_sdram_width = 0,
	.registered_dimm = 0,
	.mirrored_dimm = 0,
	.n_row_addr = 15,
	.n_col_addr = 10,
	.n_banks_per_sdram_device = 8,
	.edc_config = 0,
	.burst_lengths_bitmask = 0x0c,

	.tckmin_x_ps = 1875,
	.caslat_x = 0x1e << 4, /* 5,6,7,8 */
	.taa_ps = 13125,
	.twr_ps = 15000,
	.trcd_ps = 13125,
	.trrd_ps = 7500,
	.trp_ps = 13125,
	.tras_ps = 37500,
	.trc_ps = 50625,
	.trfc_ps = 160000,
	.twtr_ps = 7500,
	.trtp_ps = 7500,
	.refresh_rate_ps = 7800000,
	.tfaw_ps = 37500,
	};
	#elif defined(CONFIG_TARGET_P1024RDB)
	/*
	* Samsung K4B2G0846C-HCH9
	* The following timing are for "downshift"
	* i.e. to use CL9 part as CL7
	* otherwise, tAA, tRCD, tRP will be 13500ps
	* and tRC will be 49500ps
	*/
	dimm_params_t ddr_raw_timing = {
	.n_ranks = 1,
	.rank_density = 1073741824u,
	.capacity = 1073741824u,
	.primary_sdram_width = 32,
	.ec_sdram_width = 0,
	.registered_dimm = 0,
	.mirrored_dimm = 0,
	.n_row_addr = 15,
	.n_col_addr = 10,
	.n_banks_per_sdram_device = 8,
	.edc_config = 0,
	.burst_lengths_bitmask = 0x0c,

	.tckmin_x_ps = 1500,
	.caslat_x = 0x3e << 4, /* 5,6,7,8,9 */
	.taa_ps = 13125,
	.twr_ps = 15000,
	.trcd_ps = 13125,
	.trrd_ps = 6000,
	.trp_ps = 13125,
	.tras_ps = 36000,
	.trc_ps = 49125,
	.trfc_ps = 160000,
	.twtr_ps = 7500,
	.trtp_ps = 7500,
	.refresh_rate_ps = 7800000,
	.tfaw_ps = 30000,
	};
	#else
	#error Missing raw timing data for this board
	#endif

	int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
	unsigned int controller_number,
	unsigned int dimm_number)
	{
	const char dimm_model[] = "Fixed DDR on board";

	if ((controller_number == 0) && (dimm_number == 0)) {
	memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
	memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
	memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
	}

	return 0;
	}
	#endif /* CONFIG_SYS_DDR_RAW_TIMING */

	#ifdef CFG_SYS_DDR_CS0_BNDS
	/* Fixed sdram init -- doesn't use serial presence detect. */
	phys_size_t fixed_sdram(void)
	{
	sys_info_t sysinfo;
	char buf[32];
	size_t ddr_size;
	fsl_ddr_cfg_regs_t ddr_cfg_regs = {
	.cs[0].bnds = CFG_SYS_DDR_CS0_BNDS,
	.cs[0].config = CFG_SYS_DDR_CS0_CONFIG,
	.cs[0].config_2 = CFG_SYS_DDR_CS0_CONFIG_2,
	#if CONFIG_CHIP_SELECTS_PER_CTRL > 1
	.cs[1].bnds = CFG_SYS_DDR_CS1_BNDS,
	.cs[1].config = CFG_SYS_DDR_CS1_CONFIG,
	.cs[1].config_2 = CFG_SYS_DDR_CS1_CONFIG_2,
	#endif
	.timing_cfg_3 = CFG_SYS_DDR_TIMING_3,
	.timing_cfg_0 = CFG_SYS_DDR_TIMING_0,
	.timing_cfg_1 = CFG_SYS_DDR_TIMING_1,
	.timing_cfg_2 = CFG_SYS_DDR_TIMING_2,
	.ddr_sdram_cfg = CFG_SYS_DDR_CONTROL,
	.ddr_sdram_cfg_2 = CFG_SYS_DDR_CONTROL_2,
	.ddr_sdram_mode = CFG_SYS_DDR_MODE_1,
	.ddr_sdram_mode_2 = CFG_SYS_DDR_MODE_2,
	.ddr_sdram_md_cntl = CFG_SYS_DDR_MODE_CONTROL,
	.ddr_sdram_interval = CFG_SYS_DDR_INTERVAL,
	.ddr_data_init = 0xdeadbeef, /* Poison value */
	.ddr_sdram_clk_cntl = CFG_SYS_DDR_CLK_CTRL,
	.ddr_init_addr = CFG_SYS_DDR_INIT_ADDR,
	.ddr_init_ext_addr = CFG_SYS_DDR_INIT_EXT_ADDR,
	.timing_cfg_4 = CFG_SYS_DDR_TIMING_4,
	.timing_cfg_5 = CFG_SYS_DDR_TIMING_5,
	.ddr_zq_cntl = CFG_SYS_DDR_ZQ_CONTROL,
	.ddr_wrlvl_cntl = CFG_SYS_DDR_WRLVL_CONTROL,
	.ddr_sr_cntr = CFG_SYS_DDR_SR_CNTR,
	.ddr_sdram_rcw_1 = CFG_SYS_DDR_RCW_1,
	.ddr_sdram_rcw_2 = CFG_SYS_DDR_RCW_2
	};

	get_sys_info(&sysinfo);
	printf("Configuring DDR for %s MT/s data rate\n",
	strmhz(buf, sysinfo.freq_ddrbus));

	ddr_size = CFG_SYS_SDRAM_SIZE * 1024 * 1024;

	fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0);

	if (set_ddr_laws(CFG_SYS_DDR_SDRAM_BASE,
	ddr_size, LAW_TRGT_IF_DDR_1) < 0) {
	printf("ERROR setting Local Access Windows for DDR\n");
	return 0;
	};

	return ddr_size;
	}
	#endif

	void fsl_ddr_board_options(memctl_options_t *popts,
	dimm_params_t *pdimm,
	unsigned int ctrl_num)
	{
	int i;
	popts->clk_adjust = 6;
	popts->cpo_override = 0x1f;
	popts->write_data_delay = 2;
	popts->half_strength_driver_enable = 1;
	/* Write leveling override */
	popts->wrlvl_en = 1;
	popts->wrlvl_override = 1;
	popts->wrlvl_sample = 0xf;
	popts->wrlvl_start = 0x8;
	popts->trwt_override = 1;
	popts->trwt = 0;

	if (pdimm->primary_sdram_width == 64)
	popts->data_bus_width = 0;
	else if (pdimm->primary_sdram_width == 32)
	popts->data_bus_width = 1;
	else
	printf("Error in DDR bus width configuration!\n");

	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
	popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
	popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
	}
	}