| # SPDX-License-Identifier: GPL-2.0+ |
| # |
| # Copyright (C) 2014-2016 Stefan Roese <sr@denx.de> |
| |
| ifdef CONFIG_ARM64 |
| |
| obj-$(CONFIG_ARMADA_3700) += armada3700/ |
| obj-$(CONFIG_ARMADA_8K) += armada8k/ |
| obj-$(CONFIG_ALLEYCAT_5) += alleycat5/ |
| obj-y += arm64-common.o |
| |
| else # CONFIG_ARM64 |
| |
| ifdef CONFIG_ARCH_KIRKWOOD |
| |
| obj-y = dram.o |
| obj-y += gpio.o |
| obj-y += mbus.o |
| |
| else # CONFIG_ARCH_KIRKWOOD |
| |
| obj-y = cpu.o |
| obj-y += dram.o |
| obj-y += lowlevel.o |
| obj-$(CONFIG_DM_RESET) += system-controller.o |
| ifndef CONFIG_SPL_BUILD |
| obj-$(CONFIG_ARMADA_375) += ../../../drivers/ddr/marvell/axp/xor.o |
| obj-$(CONFIG_ARMADA_38X) += ../../../drivers/ddr/marvell/a38x/xor.o |
| obj-$(CONFIG_ARMADA_XP) += ../../../drivers/ddr/marvell/axp/xor.o |
| obj-$(CONFIG_ARMADA_MSYS) += ../../../drivers/ddr/marvell/axp/xor.o |
| |
| ifdef CONFIG_ARMADA_38X |
| obj-$(CONFIG_MVEBU_EFUSE) += efuse.o |
| endif |
| |
| extra-y += kwbimage.cfg |
| |
| ifneq ($(CONFIG_ARMADA_XP),) |
| KWB_REPLACE += CPU |
| KWB_CFG_CPU = SHEEVA |
| else ifneq ($(CONFIG_ARMADA_375)$(CONFIG_ARMADA_38X),) |
| KWB_REPLACE += CPU |
| KWB_CFG_CPU = A9 |
| endif |
| |
| KWB_REPLACE += LOAD_ADDRESS |
| KWB_CFG_LOAD_ADDRESS = $(CONFIG_SPL_TEXT_BASE) |
| |
| KWB_REPLACE += BOOT_FROM |
| ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI),) |
| KWB_CFG_BOOT_FROM=spi |
| endif |
| ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_NAND),) |
| KWB_CFG_BOOT_FROM=nand |
| endif |
| ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC),) |
| KWB_CFG_BOOT_FROM=sdio |
| endif |
| ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_SATA),) |
| KWB_CFG_BOOT_FROM=sata |
| endif |
| ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_PEX),) |
| KWB_CFG_BOOT_FROM=pex |
| endif |
| ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_UART),) |
| KWB_CFG_BOOT_FROM=uart |
| endif |
| |
| ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_NAND),) |
| KWB_REPLACE += NAND_PAGE_SIZE NAND_BLKSZ NAND_BADBLK_LOCATION |
| KWB_CFG_NAND_PAGE_SIZE = $(CONFIG_SYS_NAND_PAGE_SIZE) |
| KWB_CFG_NAND_BLKSZ = $(CONFIG_SYS_NAND_BLOCK_SIZE) |
| KWB_CFG_NAND_BADBLK_LOCATION = $(CONFIG_MVEBU_SPL_NAND_BADBLK_LOCATION) |
| endif |
| |
| ifneq ($(CONFIG_SECURED_MODE_IMAGE),) |
| KWB_REPLACE += CSK_INDEX |
| KWB_CFG_CSK_INDEX = $(CONFIG_SECURED_MODE_CSK_INDEX) |
| |
| KWB_REPLACE += SEC_BOOT_DEV |
| ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI),) |
| KWB_CFG_SEC_BOOT_DEV=0x34 |
| endif |
| ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC),) |
| KWB_CFG_SEC_BOOT_DEV=0x31 |
| endif |
| |
| KWB_REPLACE += SEC_FUSE_DUMP |
| KWB_CFG_SEC_FUSE_DUMP = a38x |
| endif |
| |
| ifdef CONFIG_ARMADA_38X |
| # BootROM output is by default enabled on pre-A38x and disabled on A38x |
| # DEBUG flag on A38x for non-UART boot source only enable BootROM output and nothing more |
| KWB_REPLACE += DEBUG |
| KWB_CFG_DEBUG = 1 |
| endif |
| |
| quiet_cmd_kwbcfg = KWBCFG $@ |
| cmd_kwbcfg = sed -ne '$(foreach V,$(KWB_REPLACE),s/\#@$(V)/$(V) $(KWB_CFG_$(V))/;)p' \ |
| <$< >$(dir $@)$(@F) |
| |
| $(obj)/kwbimage.cfg: $(src)/kwbimage.cfg.in include/autoconf.mk \ |
| include/config/auto.conf |
| $(call cmd,kwbcfg) |
| |
| endif # CONFIG_SPL_BUILD |
| obj-y += gpio.o |
| obj-y += mbus.o |
| obj-$(CONFIG_SPL_BUILD) += spl.o |
| obj-$(CONFIG_SPL_BUILD) += lowlevel_spl.o |
| |
| obj-$(CONFIG_ARMADA_38X) += serdes/a38x/ |
| obj-$(CONFIG_ARMADA_XP) += serdes/axp/ |
| |
| endif # CONFIG_ARCH_KIRKWOOD |
| endif # CONFIG_ARM64 |