drivers/spi/sh_qspi.c - filogic/uboot - Gitiles

 // SPDX-License-Identifier: GPL-2.0
 /*
  * SH QSPI (Quad SPI) driver
  *
  * Copyright (C) 2013 Renesas Electronics Corporation
  * Copyright (C) 2013 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
  */

 #define LOG_CATEGORY UCLASS_SPI

 #include <common.h>
 #include <console.h>
 #include <malloc.h>
 #include <spi.h>
 #include <wait_bit.h>
 #include <asm/arch/renesas.h>
 #include <asm/io.h>
 #include <linux/bitops.h>

 /* SH QSPI register bit masks <REG>_<BIT> */
 #define SPCR_MSTR	0x08
 #define SPCR_SPE	0x40
 #define SPSR_SPRFF	0x80
 #define SPSR_SPTEF	0x20
 #define SPPCR_IO3FV	0x04
 #define SPPCR_IO2FV	0x02
 #define SPPCR_IO1FV	0x01
 #define SPBDCR_RXBC0	BIT(0)
 #define SPCMD_SCKDEN	BIT(15)
 #define SPCMD_SLNDEN	BIT(14)
 #define SPCMD_SPNDEN	BIT(13)
 #define SPCMD_SSLKP	BIT(7)
 #define SPCMD_BRDV0	BIT(2)
 #define SPCMD_INIT1	SPCMD_SCKDEN | SPCMD_SLNDEN | \
 			SPCMD_SPNDEN | SPCMD_SSLKP | \
 			SPCMD_BRDV0
 #define SPCMD_INIT2	SPCMD_SPNDEN | SPCMD_SSLKP | \
 			SPCMD_BRDV0
 #define SPBFCR_TXRST	BIT(7)
 #define SPBFCR_RXRST	BIT(6)
 #define SPBFCR_TXTRG	0x30
 #define SPBFCR_RXTRG	0x07

 /* SH QSPI register set */
 struct sh_qspi_regs {
 	u8	spcr;
 	u8	sslp;
 	u8	sppcr;
 	u8	spsr;
 	u32	spdr;
 	u8	spscr;
 	u8	spssr;
 	u8	spbr;
 	u8	spdcr;
 	u8	spckd;
 	u8	sslnd;
 	u8	spnd;
 	u8	dummy0;
 	u16	spcmd0;
 	u16	spcmd1;
 	u16	spcmd2;
 	u16	spcmd3;
 	u8	spbfcr;
 	u8	dummy1;
 	u16	spbdcr;
 	u32	spbmul0;
 	u32	spbmul1;
 	u32	spbmul2;
 	u32	spbmul3;
 };

 struct sh_qspi_slave {
 #if !CONFIG_IS_ENABLED(DM_SPI)
 	struct spi_slave	slave;
 #endif
 	struct sh_qspi_regs	*regs;
 };

 static void sh_qspi_init(struct sh_qspi_slave *ss)
 {
 	/* QSPI initialize */
 	/* Set master mode only */
 	writeb(SPCR_MSTR, &ss->regs->spcr);

 	/* Set SSL signal level */
 	writeb(0x00, &ss->regs->sslp);

 	/* Set MOSI signal value when transfer is in idle state */
 	writeb(SPPCR_IO3FV|SPPCR_IO2FV, &ss->regs->sppcr);

 	/* Set bit rate. See 58.3.8 Quad Serial Peripheral Interface */
 	writeb(0x01, &ss->regs->spbr);

 	/* Disable Dummy Data Transmission */
 	writeb(0x00, &ss->regs->spdcr);

 	/* Set clock delay value */
 	writeb(0x00, &ss->regs->spckd);

 	/* Set SSL negation delay value */
 	writeb(0x00, &ss->regs->sslnd);

 	/* Set next-access delay value */
 	writeb(0x00, &ss->regs->spnd);

 	/* Set equence command */
 	writew(SPCMD_INIT2, &ss->regs->spcmd0);

 	/* Reset transfer and receive Buffer */
 	setbits_8(&ss->regs->spbfcr, SPBFCR_TXRST|SPBFCR_RXRST);

 	/* Clear transfer and receive Buffer control bit */
 	clrbits_8(&ss->regs->spbfcr, SPBFCR_TXRST|SPBFCR_RXRST);

 	/* Set equence control method. Use equence0 only */
 	writeb(0x00, &ss->regs->spscr);

 	/* Enable SPI function */
 	setbits_8(&ss->regs->spcr, SPCR_SPE);
 }

 static void sh_qspi_cs_activate(struct sh_qspi_slave *ss)
 {
 	/* Set master mode only */
 	writeb(SPCR_MSTR, &ss->regs->spcr);

 	/* Set command */
 	writew(SPCMD_INIT1, &ss->regs->spcmd0);

 	/* Reset transfer and receive Buffer */
 	setbits_8(&ss->regs->spbfcr, SPBFCR_TXRST|SPBFCR_RXRST);

 	/* Clear transfer and receive Buffer control bit */
 	clrbits_8(&ss->regs->spbfcr, SPBFCR_TXRST|SPBFCR_RXRST);

 	/* Set equence control method. Use equence0 only */
 	writeb(0x00, &ss->regs->spscr);

 	/* Enable SPI function */
 	setbits_8(&ss->regs->spcr, SPCR_SPE);
 }

 static void sh_qspi_cs_deactivate(struct sh_qspi_slave *ss)
 {
 	/* Disable SPI Function */
 	clrbits_8(&ss->regs->spcr, SPCR_SPE);
 }

 static int sh_qspi_xfer_common(struct sh_qspi_slave *ss, unsigned int bitlen,
 			       const void *dout, void *din, unsigned long flags)
 {
 	u32 nbyte, chunk;
 	int i, ret = 0;
 	u8 dtdata = 0, drdata;
 	u8 *tdata = &dtdata, *rdata = &drdata;
 	u32 *spbmul0 = &ss->regs->spbmul0;

 	if (dout == NULL && din == NULL) {
 		if (flags & SPI_XFER_END)
 			sh_qspi_cs_deactivate(ss);
 		return 0;
 	}

 	if (bitlen % 8) {
 		log_warning("bitlen is not 8bit aligned %d", bitlen);
 		return 1;
 	}

 	nbyte = bitlen / 8;

 	if (flags & SPI_XFER_BEGIN) {
 		sh_qspi_cs_activate(ss);

 		/* Set 1048576 byte */
 		writel(0x100000, spbmul0);
 	}

 	if (flags & SPI_XFER_END)
 		writel(nbyte, spbmul0);

 	if (dout != NULL)
 		tdata = (u8 *)dout;

 	if (din != NULL)
 		rdata = din;

 	while (nbyte > 0) {
 		/*
 		 * Check if there is 32 Byte chunk and if there is, transfer
 		 * it in one burst, otherwise transfer on byte-by-byte basis.
 		 */
 		chunk = (nbyte >= 32) ? 32 : 1;

 		clrsetbits_8(&ss->regs->spbfcr, SPBFCR_TXTRG | SPBFCR_RXTRG,
 			     chunk == 32 ? SPBFCR_TXTRG | SPBFCR_RXTRG : 0);

 		ret = wait_for_bit_8(&ss->regs->spsr, SPSR_SPTEF,
 				     true, 1000, true);
 		if (ret)
 			return ret;

 		for (i = 0; i < chunk; i++) {
 			writeb(*tdata, &ss->regs->spdr);
 			if (dout != NULL)
 				tdata++;
 		}

 		ret = wait_for_bit_8(&ss->regs->spsr, SPSR_SPRFF,
 				     true, 1000, true);
 		if (ret)
 			return ret;

 		for (i = 0; i < chunk; i++) {
 			*rdata = readb(&ss->regs->spdr);
 			if (din != NULL)
 				rdata++;
 		}

 		nbyte -= chunk;
 	}

 	if (flags & SPI_XFER_END)
 		sh_qspi_cs_deactivate(ss);

 	return ret;
 }

 #if !CONFIG_IS_ENABLED(DM_SPI)
 static inline struct sh_qspi_slave *to_sh_qspi(struct spi_slave *slave)
 {
 	return container_of(slave, struct sh_qspi_slave, slave);
 }

 int spi_cs_is_valid(unsigned int bus, unsigned int cs)
 {
 	return 1;
 }

 void spi_cs_activate(struct spi_slave *slave)
 {
 	struct sh_qspi_slave *ss = to_sh_qspi(slave);

 	sh_qspi_cs_activate(ss);
 }

 void spi_cs_deactivate(struct spi_slave *slave)
 {
 	struct sh_qspi_slave *ss = to_sh_qspi(slave);

 	sh_qspi_cs_deactivate(ss);
 }

 struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 		unsigned int max_hz, unsigned int mode)
 {
 	struct sh_qspi_slave *ss;

 	if (!spi_cs_is_valid(bus, cs))
 		return NULL;

 	ss = spi_alloc_slave(struct sh_qspi_slave, bus, cs);
 	if (!ss) {
 		printf("SPI_error: Fail to allocate sh_qspi_slave\n");
 		return NULL;
 	}

 	ss->regs = (struct sh_qspi_regs *)SH_QSPI_BASE;

 	/* Init SH QSPI */
 	sh_qspi_init(ss);

 	return &ss->slave;
 }

 void spi_free_slave(struct spi_slave *slave)
 {
 	struct sh_qspi_slave *spi = to_sh_qspi(slave);

 	free(spi);
 }

 int spi_claim_bus(struct spi_slave *slave)
 {
 	return 0;
 }

 void spi_release_bus(struct spi_slave *slave)
 {
 }

 int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
 	     const void *dout, void *din, unsigned long flags)
 {
 	struct sh_qspi_slave *ss = to_sh_qspi(slave);

 	return sh_qspi_xfer_common(ss, bitlen, dout, din, flags);
 }

 #else

 #include <dm.h>

 static int sh_qspi_xfer(struct udevice *dev, unsigned int bitlen,
 			const void *dout, void *din, unsigned long flags)
 {
 	struct udevice *bus = dev->parent;
 	struct sh_qspi_slave *ss = dev_get_plat(bus);

 	return sh_qspi_xfer_common(ss, bitlen, dout, din, flags);
 }

 static int sh_qspi_set_speed(struct udevice *dev, uint speed)
 {
 	/* This is a SPI NOR controller, do nothing. */
 	return 0;
 }

 static int sh_qspi_set_mode(struct udevice *dev, uint mode)
 {
 	/* This is a SPI NOR controller, do nothing. */
 	return 0;
 }

 static int sh_qspi_probe(struct udevice *dev)
 {
 	struct sh_qspi_slave *ss = dev_get_plat(dev);

 	sh_qspi_init(ss);

 	return 0;
 }

 static int sh_qspi_of_to_plat(struct udevice *dev)
 {
 	struct sh_qspi_slave *plat = dev_get_plat(dev);

 	plat->regs = dev_read_addr_ptr(dev);

 	return 0;
 }

 static const struct dm_spi_ops sh_qspi_ops = {
 	.xfer		= sh_qspi_xfer,
 	.set_speed	= sh_qspi_set_speed,
 	.set_mode	= sh_qspi_set_mode,
 };

 static const struct udevice_id sh_qspi_ids[] = {
 	{ .compatible = "renesas,qspi" },
 	{ }
 };

 U_BOOT_DRIVER(sh_qspi) = {
 	.name		= "sh_qspi",
 	.id		= UCLASS_SPI,
 	.of_match	= sh_qspi_ids,
 	.ops		= &sh_qspi_ops,
 	.of_to_plat = sh_qspi_of_to_plat,
 	.plat_auto	= sizeof(struct sh_qspi_slave),
 	.probe		= sh_qspi_probe,
 };
 #endif
	// SPDX-License-Identifier: GPL-2.0
	/*
	* SH QSPI (Quad SPI) driver
	*
	* Copyright (C) 2013 Renesas Electronics Corporation
	* Copyright (C) 2013 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
	*/

	#define LOG_CATEGORY UCLASS_SPI

	#include <common.h>
	#include <console.h>
	#include <malloc.h>
	#include <spi.h>
	#include <wait_bit.h>
	#include <asm/arch/renesas.h>
	#include <asm/io.h>
	#include <linux/bitops.h>

	/* SH QSPI register bit masks <REG>_<BIT> */
	#define SPCR_MSTR 0x08
	#define SPCR_SPE 0x40
	#define SPSR_SPRFF 0x80
	#define SPSR_SPTEF 0x20
	#define SPPCR_IO3FV 0x04
	#define SPPCR_IO2FV 0x02
	#define SPPCR_IO1FV 0x01
	#define SPBDCR_RXBC0 BIT(0)
	#define SPCMD_SCKDEN BIT(15)
	#define SPCMD_SLNDEN BIT(14)
	#define SPCMD_SPNDEN BIT(13)
	#define SPCMD_SSLKP BIT(7)
	#define SPCMD_BRDV0 BIT(2)
	#define SPCMD_INIT1 SPCMD_SCKDEN \| SPCMD_SLNDEN \| \
	SPCMD_SPNDEN \| SPCMD_SSLKP \| \
	SPCMD_BRDV0
	#define SPCMD_INIT2 SPCMD_SPNDEN \| SPCMD_SSLKP \| \
	SPCMD_BRDV0
	#define SPBFCR_TXRST BIT(7)
	#define SPBFCR_RXRST BIT(6)
	#define SPBFCR_TXTRG 0x30
	#define SPBFCR_RXTRG 0x07

	/* SH QSPI register set */
	struct sh_qspi_regs {
	u8 spcr;
	u8 sslp;
	u8 sppcr;
	u8 spsr;
	u32 spdr;
	u8 spscr;
	u8 spssr;
	u8 spbr;
	u8 spdcr;
	u8 spckd;
	u8 sslnd;
	u8 spnd;
	u8 dummy0;
	u16 spcmd0;
	u16 spcmd1;
	u16 spcmd2;
	u16 spcmd3;
	u8 spbfcr;
	u8 dummy1;
	u16 spbdcr;
	u32 spbmul0;
	u32 spbmul1;
	u32 spbmul2;
	u32 spbmul3;
	};

	struct sh_qspi_slave {
	#if !CONFIG_IS_ENABLED(DM_SPI)
	struct spi_slave slave;
	#endif
	struct sh_qspi_regs *regs;
	};

	static void sh_qspi_init(struct sh_qspi_slave *ss)
	{
	/* QSPI initialize */
	/* Set master mode only */
	writeb(SPCR_MSTR, &ss->regs->spcr);

	/* Set SSL signal level */
	writeb(0x00, &ss->regs->sslp);

	/* Set MOSI signal value when transfer is in idle state */
	writeb(SPPCR_IO3FV\|SPPCR_IO2FV, &ss->regs->sppcr);

	/* Set bit rate. See 58.3.8 Quad Serial Peripheral Interface */
	writeb(0x01, &ss->regs->spbr);

	/* Disable Dummy Data Transmission */
	writeb(0x00, &ss->regs->spdcr);

	/* Set clock delay value */
	writeb(0x00, &ss->regs->spckd);

	/* Set SSL negation delay value */
	writeb(0x00, &ss->regs->sslnd);

	/* Set next-access delay value */
	writeb(0x00, &ss->regs->spnd);

	/* Set equence command */
	writew(SPCMD_INIT2, &ss->regs->spcmd0);

	/* Reset transfer and receive Buffer */
	setbits_8(&ss->regs->spbfcr, SPBFCR_TXRST\|SPBFCR_RXRST);

	/* Clear transfer and receive Buffer control bit */
	clrbits_8(&ss->regs->spbfcr, SPBFCR_TXRST\|SPBFCR_RXRST);

	/* Set equence control method. Use equence0 only */
	writeb(0x00, &ss->regs->spscr);

	/* Enable SPI function */
	setbits_8(&ss->regs->spcr, SPCR_SPE);
	}

	static void sh_qspi_cs_activate(struct sh_qspi_slave *ss)
	{
	/* Set master mode only */
	writeb(SPCR_MSTR, &ss->regs->spcr);

	/* Set command */
	writew(SPCMD_INIT1, &ss->regs->spcmd0);

	/* Reset transfer and receive Buffer */
	setbits_8(&ss->regs->spbfcr, SPBFCR_TXRST\|SPBFCR_RXRST);

	/* Clear transfer and receive Buffer control bit */
	clrbits_8(&ss->regs->spbfcr, SPBFCR_TXRST\|SPBFCR_RXRST);

	/* Set equence control method. Use equence0 only */
	writeb(0x00, &ss->regs->spscr);

	/* Enable SPI function */
	setbits_8(&ss->regs->spcr, SPCR_SPE);
	}

	static void sh_qspi_cs_deactivate(struct sh_qspi_slave *ss)
	{
	/* Disable SPI Function */
	clrbits_8(&ss->regs->spcr, SPCR_SPE);
	}

	static int sh_qspi_xfer_common(struct sh_qspi_slave *ss, unsigned int bitlen,
	const void dout, void din, unsigned long flags)
	{
	u32 nbyte, chunk;
	int i, ret = 0;
	u8 dtdata = 0, drdata;
	u8 tdata = &dtdata, rdata = &drdata;
	u32 *spbmul0 = &ss->regs->spbmul0;

	if (dout == NULL && din == NULL) {
	if (flags & SPI_XFER_END)
	sh_qspi_cs_deactivate(ss);
	return 0;
	}

	if (bitlen % 8) {
	log_warning("bitlen is not 8bit aligned %d", bitlen);
	return 1;
	}

	nbyte = bitlen / 8;

	if (flags & SPI_XFER_BEGIN) {
	sh_qspi_cs_activate(ss);

	/* Set 1048576 byte */
	writel(0x100000, spbmul0);
	}

	if (flags & SPI_XFER_END)
	writel(nbyte, spbmul0);

	if (dout != NULL)
	tdata = (u8 *)dout;

	if (din != NULL)
	rdata = din;

	while (nbyte > 0) {
	/*
	* Check if there is 32 Byte chunk and if there is, transfer
	* it in one burst, otherwise transfer on byte-by-byte basis.
	*/
	chunk = (nbyte >= 32) ? 32 : 1;

	clrsetbits_8(&ss->regs->spbfcr, SPBFCR_TXTRG \| SPBFCR_RXTRG,
	chunk == 32 ? SPBFCR_TXTRG \| SPBFCR_RXTRG : 0);

	ret = wait_for_bit_8(&ss->regs->spsr, SPSR_SPTEF,
	true, 1000, true);
	if (ret)
	return ret;

	for (i = 0; i < chunk; i++) {
	writeb(*tdata, &ss->regs->spdr);
	if (dout != NULL)
	tdata++;
	}

	ret = wait_for_bit_8(&ss->regs->spsr, SPSR_SPRFF,
	true, 1000, true);
	if (ret)
	return ret;

	for (i = 0; i < chunk; i++) {
	*rdata = readb(&ss->regs->spdr);
	if (din != NULL)
	rdata++;
	}

	nbyte -= chunk;
	}

	if (flags & SPI_XFER_END)
	sh_qspi_cs_deactivate(ss);

	return ret;
	}

	#if !CONFIG_IS_ENABLED(DM_SPI)
	static inline struct sh_qspi_slave to_sh_qspi(struct spi_slave slave)
	{
	return container_of(slave, struct sh_qspi_slave, slave);
	}

	int spi_cs_is_valid(unsigned int bus, unsigned int cs)
	{
	return 1;
	}

	void spi_cs_activate(struct spi_slave *slave)
	{
	struct sh_qspi_slave *ss = to_sh_qspi(slave);

	sh_qspi_cs_activate(ss);
	}

	void spi_cs_deactivate(struct spi_slave *slave)
	{
	struct sh_qspi_slave *ss = to_sh_qspi(slave);

	sh_qspi_cs_deactivate(ss);
	}

	struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
	unsigned int max_hz, unsigned int mode)
	{
	struct sh_qspi_slave *ss;

	if (!spi_cs_is_valid(bus, cs))
	return NULL;

	ss = spi_alloc_slave(struct sh_qspi_slave, bus, cs);
	if (!ss) {
	printf("SPI_error: Fail to allocate sh_qspi_slave\n");
	return NULL;
	}

	ss->regs = (struct sh_qspi_regs *)SH_QSPI_BASE;

	/* Init SH QSPI */
	sh_qspi_init(ss);

	return &ss->slave;
	}

	void spi_free_slave(struct spi_slave *slave)
	{
	struct sh_qspi_slave *spi = to_sh_qspi(slave);

	free(spi);
	}

	int spi_claim_bus(struct spi_slave *slave)
	{
	return 0;
	}

	void spi_release_bus(struct spi_slave *slave)
	{
	}

	int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
	const void dout, void din, unsigned long flags)
	{
	struct sh_qspi_slave *ss = to_sh_qspi(slave);

	return sh_qspi_xfer_common(ss, bitlen, dout, din, flags);
	}

	#else

	#include <dm.h>

	static int sh_qspi_xfer(struct udevice *dev, unsigned int bitlen,
	const void dout, void din, unsigned long flags)
	{
	struct udevice *bus = dev->parent;
	struct sh_qspi_slave *ss = dev_get_plat(bus);

	return sh_qspi_xfer_common(ss, bitlen, dout, din, flags);
	}

	static int sh_qspi_set_speed(struct udevice *dev, uint speed)
	{
	/* This is a SPI NOR controller, do nothing. */
	return 0;
	}

	static int sh_qspi_set_mode(struct udevice *dev, uint mode)
	{
	/* This is a SPI NOR controller, do nothing. */
	return 0;
	}

	static int sh_qspi_probe(struct udevice *dev)
	{
	struct sh_qspi_slave *ss = dev_get_plat(dev);

	sh_qspi_init(ss);

	return 0;
	}

	static int sh_qspi_of_to_plat(struct udevice *dev)
	{
	struct sh_qspi_slave *plat = dev_get_plat(dev);

	plat->regs = dev_read_addr_ptr(dev);

	return 0;
	}

	static const struct dm_spi_ops sh_qspi_ops = {
	.xfer = sh_qspi_xfer,
	.set_speed = sh_qspi_set_speed,
	.set_mode = sh_qspi_set_mode,
	};

	static const struct udevice_id sh_qspi_ids[] = {
	{ .compatible = "renesas,qspi" },
	{ }
	};

	U_BOOT_DRIVER(sh_qspi) = {
	.name = "sh_qspi",
	.id = UCLASS_SPI,
	.of_match = sh_qspi_ids,
	.ops = &sh_qspi_ops,
	.of_to_plat = sh_qspi_of_to_plat,
	.plat_auto = sizeof(struct sh_qspi_slave),
	.probe = sh_qspi_probe,
	};
	#endif