| // SPDX-License-Identifier: GPL-2.0-only OR MIT |
| /* |
| * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/ |
| * |
| * J721E SK URL: https://www.ti.com/tool/SK-TDA4VM |
| */ |
| |
| /dts-v1/; |
| |
| #include "k3-j721e.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/net/ti-dp83867.h> |
| |
| / { |
| compatible = "ti,j721e-sk", "ti,j721e"; |
| model = "Texas Instruments J721E SK"; |
| |
| aliases { |
| serial0 = &wkup_uart0; |
| serial1 = &mcu_uart0; |
| serial2 = &main_uart0; |
| serial3 = &main_uart1; |
| ethernet0 = &cpsw_port1; |
| mmc1 = &main_sdhci1; |
| }; |
| |
| chosen { |
| stdout-path = "serial2:115200n8"; |
| }; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| /* 4G RAM */ |
| reg = <0x00000000 0x80000000 0x00000000 0x80000000>, |
| <0x00000008 0x80000000 0x00000000 0x80000000>; |
| }; |
| |
| reserved_memory: reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| secure_ddr: optee@9e800000 { |
| reg = <0x00 0x9e800000 0x00 0x01800000>; |
| alignment = <0x1000>; |
| no-map; |
| }; |
| |
| mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { |
| compatible = "shared-dma-pool"; |
| reg = <0x00 0xa0000000 0x00 0x100000>; |
| no-map; |
| }; |
| |
| mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { |
| compatible = "shared-dma-pool"; |
| reg = <0x00 0xa0100000 0x00 0xf00000>; |
| no-map; |
| }; |
| |
| mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { |
| compatible = "shared-dma-pool"; |
| reg = <0x00 0xa1000000 0x00 0x100000>; |
| no-map; |
| }; |
| |
| mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { |
| compatible = "shared-dma-pool"; |
| reg = <0x00 0xa1100000 0x00 0xf00000>; |
| no-map; |
| }; |
| |
| main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 { |
| compatible = "shared-dma-pool"; |
| reg = <0x00 0xa2000000 0x00 0x100000>; |
| no-map; |
| }; |
| |
| main_r5fss0_core0_memory_region: r5f-memory@a2100000 { |
| compatible = "shared-dma-pool"; |
| reg = <0x00 0xa2100000 0x00 0xf00000>; |
| no-map; |
| }; |
| |
| main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 { |
| compatible = "shared-dma-pool"; |
| reg = <0x00 0xa3000000 0x00 0x100000>; |
| no-map; |
| }; |
| |
| main_r5fss0_core1_memory_region: r5f-memory@a3100000 { |
| compatible = "shared-dma-pool"; |
| reg = <0x00 0xa3100000 0x00 0xf00000>; |
| no-map; |
| }; |
| |
| main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 { |
| compatible = "shared-dma-pool"; |
| reg = <0x00 0xa4000000 0x00 0x100000>; |
| no-map; |
| }; |
| |
| main_r5fss1_core0_memory_region: r5f-memory@a4100000 { |
| compatible = "shared-dma-pool"; |
| reg = <0x00 0xa4100000 0x00 0xf00000>; |
| no-map; |
| }; |
| |
| main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 { |
| compatible = "shared-dma-pool"; |
| reg = <0x00 0xa5000000 0x00 0x100000>; |
| no-map; |
| }; |
| |
| main_r5fss1_core1_memory_region: r5f-memory@a5100000 { |
| compatible = "shared-dma-pool"; |
| reg = <0x00 0xa5100000 0x00 0xf00000>; |
| no-map; |
| }; |
| |
| c66_1_dma_memory_region: c66-dma-memory@a6000000 { |
| compatible = "shared-dma-pool"; |
| reg = <0x00 0xa6000000 0x00 0x100000>; |
| no-map; |
| }; |
| |
| c66_0_memory_region: c66-memory@a6100000 { |
| compatible = "shared-dma-pool"; |
| reg = <0x00 0xa6100000 0x00 0xf00000>; |
| no-map; |
| }; |
| |
| c66_0_dma_memory_region: c66-dma-memory@a7000000 { |
| compatible = "shared-dma-pool"; |
| reg = <0x00 0xa7000000 0x00 0x100000>; |
| no-map; |
| }; |
| |
| c66_1_memory_region: c66-memory@a7100000 { |
| compatible = "shared-dma-pool"; |
| reg = <0x00 0xa7100000 0x00 0xf00000>; |
| no-map; |
| }; |
| |
| c71_0_dma_memory_region: c71-dma-memory@a8000000 { |
| compatible = "shared-dma-pool"; |
| reg = <0x00 0xa8000000 0x00 0x100000>; |
| no-map; |
| }; |
| |
| c71_0_memory_region: c71-memory@a8100000 { |
| compatible = "shared-dma-pool"; |
| reg = <0x00 0xa8100000 0x00 0xf00000>; |
| no-map; |
| }; |
| |
| rtos_ipc_memory_region: ipc-memories@aa000000 { |
| reg = <0x00 0xaa000000 0x00 0x01c00000>; |
| alignment = <0x1000>; |
| no-map; |
| }; |
| }; |
| |
| vusb_main: fixedregulator-vusb-main5v0 { |
| /* USB MAIN INPUT 5V DC */ |
| compatible = "regulator-fixed"; |
| regulator-name = "vusb-main5v0"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| vsys_3v3: fixedregulator-vsys3v3 { |
| /* Output of LM5141 */ |
| compatible = "regulator-fixed"; |
| regulator-name = "vsys_3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| vin-supply = <&vusb_main>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| vdd_mmc1: fixedregulator-sd { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&vdd_mmc1_en_pins_default>; |
| regulator-name = "vdd_mmc1"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| enable-active-high; |
| vin-supply = <&vsys_3v3>; |
| gpio = <&wkup_gpio0 8 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| vdd_sd_dv_alt: gpio-regulator-tps659411 { |
| compatible = "regulator-gpio"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&vdd_sd_dv_alt_pins_default>; |
| regulator-name = "tps659411"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| vin-supply = <&vsys_3v3>; |
| gpios = <&wkup_gpio0 9 GPIO_ACTIVE_HIGH>; |
| states = <1800000 0x0>, |
| <3300000 0x1>; |
| }; |
| |
| dp_pwr_3v3: fixedregulator-dp-prw { |
| compatible = "regulator-fixed"; |
| regulator-name = "dp-pwr"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&dp_pwr_en_pins_default>; |
| gpio = <&main_gpio0 111 0>; /* DP0_3V3 _EN */ |
| enable-active-high; |
| }; |
| |
| dp0: connector { |
| compatible = "dp-connector"; |
| label = "DP0"; |
| type = "full-size"; |
| dp-pwr-supply = <&dp_pwr_3v3>; |
| |
| port { |
| dp_connector_in: endpoint { |
| remote-endpoint = <&dp0_out>; |
| }; |
| }; |
| }; |
| |
| hdmi-connector { |
| compatible = "hdmi-connector"; |
| label = "hdmi"; |
| type = "a"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hdmi_hpd_pins_default>; |
| |
| ddc-i2c-bus = <&main_i2c1>; |
| |
| /* HDMI_HPD */ |
| hpd-gpios = <&main_gpio1 0 GPIO_ACTIVE_HIGH>; |
| |
| port { |
| hdmi_connector_in: endpoint { |
| remote-endpoint = <&tfp410_out>; |
| }; |
| }; |
| }; |
| |
| dvi-bridge { |
| compatible = "ti,tfp410"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hdmi_pdn_pins_default>; |
| |
| powerdown-gpios = <&main_gpio0 127 GPIO_ACTIVE_LOW>; |
| ti,deskew = <0>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| tfp410_in: endpoint { |
| remote-endpoint = <&dpi1_out>; |
| pclk-sample = <1>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| tfp410_out: endpoint { |
| remote-endpoint = |
| <&hdmi_connector_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| csi_mux: mux-controller { |
| compatible = "gpio-mux"; |
| #mux-state-cells = <1>; |
| mux-gpios = <&main_gpio0 88 GPIO_ACTIVE_HIGH>; |
| idle-state = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&main_csi_mux_sel_pins_default>; |
| }; |
| }; |
| |
| &main_pmx0 { |
| main_mmc1_pins_default: main-mmc1-default-pins { |
| pinctrl-single,pins = < |
| J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */ |
| J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */ |
| J721E_IOPAD(0x2ac, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */ |
| J721E_IOPAD(0x24c, PIN_INPUT, 0) /* (R24) MMC1_DAT0 */ |
| J721E_IOPAD(0x248, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */ |
| J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */ |
| J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */ |
| J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */ |
| >; |
| }; |
| |
| main_uart0_pins_default: main-uart0-default-pins { |
| pinctrl-single,pins = < |
| J721E_IOPAD(0x1f0, PIN_INPUT, 0) /* (AC2) UART0_CTSn */ |
| J721E_IOPAD(0x1f4, PIN_OUTPUT, 0) /* (AB1) UART0_RTSn */ |
| J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */ |
| J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */ |
| >; |
| }; |
| |
| main_uart1_pins_default: main-uart1-default-pins { |
| pinctrl-single,pins = < |
| J721E_IOPAD(0x1f8, PIN_INPUT, 0) /* (AA4) UART1_RXD */ |
| J721E_IOPAD(0x1fc, PIN_OUTPUT, 0) /* (AB4) UART1_TXD */ |
| >; |
| }; |
| |
| main_i2c0_pins_default: main-i2c0-default-pins { |
| pinctrl-single,pins = < |
| J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */ |
| J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */ |
| >; |
| }; |
| |
| main_i2c1_pins_default: main-i2c1-default-pins { |
| pinctrl-single,pins = < |
| J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */ |
| J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */ |
| >; |
| }; |
| |
| main_i2c3_pins_default: main-i2c3-default-pins { |
| pinctrl-single,pins = < |
| J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */ |
| J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */ |
| >; |
| }; |
| |
| main_usbss0_pins_default: main-usbss0-default-pins { |
| pinctrl-single,pins = < |
| J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */ |
| J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */ |
| >; |
| }; |
| |
| main_usbss1_pins_default: main-usbss1-default-pins { |
| pinctrl-single,pins = < |
| J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */ |
| >; |
| }; |
| |
| main_csi_mux_sel_pins_default: main-csi-mux-sel-default-pins { |
| pinctrl-single,pins = < |
| J721E_IOPAD(0x164, PIN_OUTPUT, 7) /* (V29) RGMII5_TD2 */ |
| >; |
| }; |
| |
| dp0_pins_default: dp0-default-pins { |
| pinctrl-single,pins = < |
| J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */ |
| >; |
| }; |
| |
| dp_pwr_en_pins_default: dp-pwr-en-default-pins { |
| pinctrl-single,pins = < |
| J721E_IOPAD(0x1c0, PIN_INPUT, 7) /* (AA2) SPI0_CS0.GPIO0_111 */ |
| >; |
| }; |
| |
| dss_vout0_pins_default: dss-vout0-default-pins { |
| pinctrl-single,pins = < |
| J721E_IOPAD(0x58, PIN_OUTPUT, 10) /* (AE22) PRG1_PRU1_GPO0.VOUT0_DATA0 */ |
| J721E_IOPAD(0x5c, PIN_OUTPUT, 10) /* (AG23) PRG1_PRU1_GPO1.VOUT0_DATA1 */ |
| J721E_IOPAD(0x60, PIN_OUTPUT, 10) /* (AF23) PRG1_PRU1_GPO2.VOUT0_DATA2 */ |
| J721E_IOPAD(0x64, PIN_OUTPUT, 10) /* (AD23) PRG1_PRU1_GPO3.VOUT0_DATA3 */ |
| J721E_IOPAD(0x68, PIN_OUTPUT, 10) /* (AH24) PRG1_PRU1_GPO4.VOUT0_DATA4 */ |
| J721E_IOPAD(0x6c, PIN_OUTPUT, 10) /* (AG21) PRG1_PRU1_GPO5.VOUT0_DATA5 */ |
| J721E_IOPAD(0x70, PIN_OUTPUT, 10) /* (AE23) PRG1_PRU1_GPO6.VOUT0_DATA6 */ |
| J721E_IOPAD(0x74, PIN_OUTPUT, 10) /* (AC21) PRG1_PRU1_GPO7.VOUT0_DATA7 */ |
| J721E_IOPAD(0x78, PIN_OUTPUT, 10) /* (Y23) PRG1_PRU1_GPO8.VOUT0_DATA8 */ |
| J721E_IOPAD(0x7c, PIN_OUTPUT, 10) /* (AF21) PRG1_PRU1_GPO9.VOUT0_DATA9 */ |
| J721E_IOPAD(0x80, PIN_OUTPUT, 10) /* (AB23) PRG1_PRU1_GPO10.VOUT0_DATA10 */ |
| J721E_IOPAD(0x84, PIN_OUTPUT, 10) /* (AJ25) PRG1_PRU1_GPO11.VOUT0_DATA11 */ |
| J721E_IOPAD(0x88, PIN_OUTPUT, 10) /* (AH25) PRG1_PRU1_GPO12.VOUT0_DATA12 */ |
| J721E_IOPAD(0x8c, PIN_OUTPUT, 10) /* (AG25) PRG1_PRU1_GPO13.VOUT0_DATA13 */ |
| J721E_IOPAD(0x90, PIN_OUTPUT, 10) /* (AH26) PRG1_PRU1_GPO14.VOUT0_DATA14 */ |
| J721E_IOPAD(0x94, PIN_OUTPUT, 10) /* (AJ27) PRG1_PRU1_GPO15.VOUT0_DATA15 */ |
| J721E_IOPAD(0x30, PIN_OUTPUT, 10) /* (AF24) PRG1_PRU0_GPO11.VOUT0_DATA16 */ |
| J721E_IOPAD(0x34, PIN_OUTPUT, 10) /* (AJ24) PRG1_PRU0_GPO12.VOUT0_DATA17 */ |
| J721E_IOPAD(0x38, PIN_OUTPUT, 10) /* (AG24) PRG1_PRU0_GPO13.VOUT0_DATA18 */ |
| J721E_IOPAD(0x3c, PIN_OUTPUT, 10) /* (AD24) PRG1_PRU0_GPO14.VOUT0_DATA19 */ |
| J721E_IOPAD(0x40, PIN_OUTPUT, 10) /* (AC24) PRG1_PRU0_GPO15.VOUT0_DATA20 */ |
| J721E_IOPAD(0x44, PIN_OUTPUT, 10) /* (AE24) PRG1_PRU0_GPO16.VOUT0_DATA21 */ |
| J721E_IOPAD(0x24, PIN_OUTPUT, 10) /* (AJ20) PRG1_PRU0_GPO8.VOUT0_DATA22 */ |
| J721E_IOPAD(0x28, PIN_OUTPUT, 10) /* (AG20) PRG1_PRU0_GPO9.VOUT0_DATA23 */ |
| J721E_IOPAD(0x9c, PIN_OUTPUT, 10) /* (AC22) PRG1_PRU1_GPO17.VOUT0_DE */ |
| J721E_IOPAD(0x98, PIN_OUTPUT, 10) /* (AJ26) PRG1_PRU1_GPO16.VOUT0_HSYNC */ |
| J721E_IOPAD(0xa4, PIN_OUTPUT, 10) /* (AH22) PRG1_PRU1_GPO19.VOUT0_PCLK */ |
| J721E_IOPAD(0xa0, PIN_OUTPUT, 10) /* (AJ22) PRG1_PRU1_GPO18.VOUT0_VSYNC */ |
| >; |
| }; |
| |
| hdmi_hpd_pins_default: hdmi-hpd-default-pins { |
| pinctrl-single,pins = < |
| J721E_IOPAD(0x204, PIN_INPUT, 7) /* (AD5) UART1_RTSn.GPIO1_0 */ |
| >; |
| }; |
| |
| hdmi_pdn_pins_default: hdmi-pdn-default-pins { |
| pinctrl-single,pins = < |
| J721E_IOPAD(0x200, PIN_INPUT, 7) /* (AC4) UART1_CTSn.GPIO0_127 */ |
| >; |
| }; |
| |
| /* Reset for M.2 E Key slot on PCIe0 */ |
| ekey_reset_pins_default: ekey-reset-pns-default-pins { |
| pinctrl-single,pins = < |
| J721E_IOPAD(0x124, PIN_INPUT, 7) /* (Y24) PRG0_PRU1_GPO9.GPIO0_72 */ |
| >; |
| }; |
| |
| main_i2c5_pins_default: main-i2c5-default-pins { |
| pinctrl-single,pins = < |
| J721E_IOPAD(0x150, PIN_INPUT_PULLUP, 2) /* (Y26) PRG0_MDIO0_MDIO.I2C5_SCL */ |
| J721E_IOPAD(0x154, PIN_INPUT_PULLUP, 2) /* (AA27) PRG0_MDIO0_MDC.I2C5_SDA */ |
| >; |
| }; |
| |
| rpi_header_gpio0_pins_default: rpi-header-gpio0-default-pins { |
| pinctrl-single,pins = < |
| J721E_IOPAD(0x01C, PIN_INPUT, 7) /* (AD22) PRG1_PRU0_GPO6.GPIO0_7 */ |
| J721E_IOPAD(0x120, PIN_INPUT, 7) /* (AA28) PRG0_PRU1_GPO8.GPIO0_71 */ |
| J721E_IOPAD(0x14C, PIN_INPUT, 7) /* (AA29) PRG0_PRU1_GPO19.GPIO0_82 */ |
| J721E_IOPAD(0x02C, PIN_INPUT, 7) /* (AD21) PRG1_PRU0_GPO10.GPIO0_11 */ |
| J721E_IOPAD(0x198, PIN_INPUT, 7) /* (V25) RGMII6_TD1.GPIO0_101 */ |
| J721E_IOPAD(0x1B0, PIN_INPUT, 7) /* (W24) RGMII6_RD1.GPIO0_107 */ |
| J721E_IOPAD(0x1A0, PIN_INPUT, 7) /* (W29) RGMII6_TXC.GPIO0_103 */ |
| J721E_IOPAD(0x008, PIN_INPUT, 7) /* (AG22) PRG1_PRU0_GPO1.GPIO0_2 */ |
| J721E_IOPAD(0x1D0, PIN_INPUT, 7) /* (AA3) SPI0_D1.GPIO0_115 */ |
| J721E_IOPAD(0x11C, PIN_INPUT, 7) /* (AA24) PRG0_PRU1_GPO7.GPIO0_70 */ |
| J721E_IOPAD(0x148, PIN_INPUT, 7) /* (AA26) PRG0_PRU1_GPO18.GPIO0_81 */ |
| J721E_IOPAD(0x004, PIN_INPUT, 7) /* (AC23) PRG1_PRU0_GPO0.GPIO0_1 */ |
| J721E_IOPAD(0x014, PIN_INPUT, 7) /* (AH23) PRG1_PRU0_GPO4.GPIO0_5 */ |
| J721E_IOPAD(0x020, PIN_INPUT, 7) /* (AE20) PRG1_PRU0_GPO7.GPIO0_8 */ |
| J721E_IOPAD(0x19C, PIN_INPUT, 7) /* (W27) RGMII6_TD0.GPIO0_102 */ |
| J721E_IOPAD(0x1B4, PIN_INPUT, 7) /* (W25) RGMII6_RD0.GPIO0_108 */ |
| J721E_IOPAD(0x188, PIN_INPUT, 7) /* (Y28) RGMII6_TX_CTL.GPIO0_97 */ |
| J721E_IOPAD(0x00C, PIN_INPUT, 7) /* (AF22) PRG1_PRU0_GPO2.GPIO0_3 */ |
| J721E_IOPAD(0x010, PIN_INPUT, 7) /* (AJ23) PRG1_PRU0_GPO3.GPIO0_4 */ |
| J721E_IOPAD(0x178, PIN_INPUT, 7) /* (U27) RGMII5_RD3.GPIO0_93 */ |
| J721E_IOPAD(0x17C, PIN_INPUT, 7) /* (U24) RGMII5_RD2.GPIO0_94 */ |
| J721E_IOPAD(0x190, PIN_INPUT, 7) /* (W23) RGMII6_TD3.GPIO0_99 */ |
| J721E_IOPAD(0x18C, PIN_INPUT, 7) /* (V23) RGMII6_RX_CTL.GPIO0_98 */ |
| >; |
| }; |
| |
| rpi_header_gpio1_pins_default: rpi-header-gpio1-default-pins { |
| pinctrl-single,pins = < |
| J721E_IOPAD(0x234, PIN_INPUT, 7) /* (U3) EXT_REFCLK1.GPIO1_12 */ |
| >; |
| }; |
| }; |
| |
| &wkup_pmx0 { |
| pmic_irq_pins_default: pmic-irq-default-pins { |
| pinctrl-single,pins = < |
| J721E_WKUP_IOPAD(0x0cc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */ |
| >; |
| }; |
| |
| mcu_cpsw_pins_default: mcu-cpsw-default-pins { |
| pinctrl-single,pins = < |
| J721E_WKUP_IOPAD(0x84, PIN_INPUT, 0) /* (B24) MCU_RGMII1_RD0 */ |
| J721E_WKUP_IOPAD(0x80, PIN_INPUT, 0) /* (A24) MCU_RGMII1_RD1 */ |
| J721E_WKUP_IOPAD(0x7c, PIN_INPUT, 0) /* (D24) MCU_RGMII1_RD2 */ |
| J721E_WKUP_IOPAD(0x78, PIN_INPUT, 0) /* (A25) MCU_RGMII1_RD3 */ |
| J721E_WKUP_IOPAD(0x74, PIN_INPUT, 0) /* (C24) MCU_RGMII1_RXC */ |
| J721E_WKUP_IOPAD(0x5c, PIN_INPUT, 0) /* (C25) MCU_RGMII1_RX_CTL */ |
| J721E_WKUP_IOPAD(0x6c, PIN_OUTPUT, 0) /* (B25) MCU_RGMII1_TD0 */ |
| J721E_WKUP_IOPAD(0x68, PIN_OUTPUT, 0) /* (A26) MCU_RGMII1_TD1 */ |
| J721E_WKUP_IOPAD(0x64, PIN_OUTPUT, 0) /* (A27) MCU_RGMII1_TD2 */ |
| J721E_WKUP_IOPAD(0x60, PIN_OUTPUT, 0) /* (A28) MCU_RGMII1_TD3 */ |
| J721E_WKUP_IOPAD(0x70, PIN_OUTPUT, 0) /* (B26) MCU_RGMII1_TXC */ |
| J721E_WKUP_IOPAD(0x58, PIN_OUTPUT, 0) /* (B27) MCU_RGMII1_TX_CTL */ |
| >; |
| }; |
| |
| mcu_mdio_pins_default: mcu-mdio1-default-pins { |
| pinctrl-single,pins = < |
| J721E_WKUP_IOPAD(0x8c, PIN_OUTPUT, 0) /* (F23) MCU_MDIO0_MDC */ |
| J721E_WKUP_IOPAD(0x88, PIN_INPUT, 0) /* (E23) MCU_MDIO0_MDIO */ |
| >; |
| }; |
| |
| mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { |
| pinctrl-single,pins = < |
| J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 0) /* (E20) MCU_OSPI0_CLK */ |
| J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 0) /* (F19) MCU_OSPI0_CSn0 */ |
| J721E_WKUP_IOPAD(0xc, PIN_INPUT, 0) /* (D20) MCU_OSPI0_D0 */ |
| J721E_WKUP_IOPAD(0x10, PIN_INPUT, 0) /* (G19) MCU_OSPI0_D1 */ |
| J721E_WKUP_IOPAD(0x14, PIN_INPUT, 0) /* (G20) MCU_OSPI0_D2 */ |
| J721E_WKUP_IOPAD(0x18, PIN_INPUT, 0) /* (F20) MCU_OSPI0_D3 */ |
| J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 0) /* (F21) MCU_OSPI0_D4 */ |
| J721E_WKUP_IOPAD(0x20, PIN_INPUT, 0) /* (E21) MCU_OSPI0_D5 */ |
| J721E_WKUP_IOPAD(0x24, PIN_INPUT, 0) /* (B22) MCU_OSPI0_D6 */ |
| J721E_WKUP_IOPAD(0x28, PIN_INPUT, 0) /* (G21) MCU_OSPI0_D7 */ |
| J721E_WKUP_IOPAD(0x8, PIN_INPUT, 0) /* (D21) MCU_OSPI0_DQS */ |
| >; |
| }; |
| |
| vdd_mmc1_en_pins_default: vdd-mmc1-en-default-pins { |
| pinctrl-single,pins = < |
| J721E_WKUP_IOPAD(0xd0, PIN_OUTPUT, 7) /* (G27) WKUP_GPIO0_8 */ |
| >; |
| }; |
| |
| vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-default-pins { |
| pinctrl-single,pins = < |
| J721E_WKUP_IOPAD(0xd4, PIN_OUTPUT, 7) /* (G26) WKUP_GPIO0_9 */ |
| >; |
| }; |
| |
| wkup_uart0_pins_default: wkup-uart0-default-pins { |
| pinctrl-single,pins = < |
| J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */ |
| J721E_WKUP_IOPAD(0xa4, PIN_OUTPUT, 0) /* (J28) WKUP_UART0_TXD */ |
| >; |
| }; |
| |
| mcu_uart0_pins_default: mcu-uart0-default-pins { |
| pinctrl-single,pins = < |
| J721E_WKUP_IOPAD(0xf0, PIN_INPUT, 2) /* (D26) MCU_I3C0_SCL.MCU_UART0_CTSn */ |
| J721E_WKUP_IOPAD(0xf4, PIN_OUTPUT, 2)/* (D25) MCU_I3C0_SDA.MCU_UART0_RTSn */ |
| J721E_WKUP_IOPAD(0xe4, PIN_INPUT, 0) /* (H28) WKUP_GPIO0_13.MCU_UART0_RXD */ |
| J721E_WKUP_IOPAD(0xe0, PIN_OUTPUT, 0)/* (G29) WKUP_GPIO0_12.MCU_UART0_TXD */ |
| >; |
| }; |
| |
| wkup_i2c0_pins_default: wkup-i2c0-default-pins { |
| pinctrl-single,pins = < |
| J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */ |
| J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */ |
| >; |
| }; |
| |
| /* Reset for M.2 M Key slot on PCIe1 */ |
| mkey_reset_pins_default: mkey-reset-pns-default-pins { |
| pinctrl-single,pins = < |
| J721E_WKUP_IOPAD(0xdc, PIN_INPUT, 7) /* (H27) WKUP_GPIO0_11 */ |
| >; |
| }; |
| }; |
| |
| &wkup_uart0 { |
| /* Wakeup UART is used by System firmware */ |
| status = "reserved"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&wkup_uart0_pins_default>; |
| }; |
| |
| &wkup_i2c0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&wkup_i2c0_pins_default>; |
| clock-frequency = <400000>; |
| |
| eeprom@51 { |
| /* AT24C512C-MAHM-T */ |
| compatible = "atmel,24c512"; |
| reg = <0x51>; |
| }; |
| |
| tps659413: pmic@48 { |
| compatible = "ti,tps6594-q1"; |
| reg = <0x48>; |
| system-power-controller; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pmic_irq_pins_default>; |
| interrupt-parent = <&wkup_gpio0>; |
| interrupts = <7 IRQ_TYPE_EDGE_FALLING>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ti,primary-pmic; |
| buck123-supply = <&vsys_3v3>; |
| buck4-supply = <&vsys_3v3>; |
| buck5-supply = <&vsys_3v3>; |
| ldo1-supply = <&vsys_3v3>; |
| ldo2-supply = <&vsys_3v3>; |
| ldo3-supply = <&vsys_3v3>; |
| ldo4-supply = <&vsys_3v3>; |
| |
| regulators { |
| bucka123: buck123 { |
| regulator-name = "vdd_cpu_avs"; |
| regulator-min-microvolt = <600000>; |
| regulator-max-microvolt = <900000>; |
| regulator-boot-on; |
| regulator-always-on; |
| bootph-pre-ram; |
| }; |
| |
| bucka4: buck4 { |
| regulator-name = "vdd_mcu_0v85"; |
| regulator-min-microvolt = <850000>; |
| regulator-max-microvolt = <850000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| bucka5: buck5 { |
| regulator-name = "vdd_phyio_1v8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldoa1: ldo1 { |
| regulator-name = "vdd1_lpddr4_1v8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldoa2: ldo2 { |
| regulator-name = "vdd_mcuio_1v8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldoa3: ldo3 { |
| regulator-name = "vdda_dll_0v8"; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldoa4: ldo4 { |
| regulator-name = "vda_mcu_1v8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| |
| tps659411: pmic@4c { |
| compatible = "ti,tps6594-q1"; |
| reg = <0x4c>; |
| system-power-controller; |
| interrupt-parent = <&wkup_gpio0>; |
| interrupts = <7 IRQ_TYPE_EDGE_FALLING>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| buck1234-supply = <&vsys_3v3>; |
| buck5-supply = <&vsys_3v3>; |
| ldo1-supply = <&vsys_3v3>; |
| ldo2-supply = <&vsys_3v3>; |
| ldo3-supply = <&vsys_3v3>; |
| ldo4-supply = <&vsys_3v3>; |
| |
| regulators { |
| buckb1234: buck1234 { |
| regulator-name = "vdd_core_0v8"; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| buckb5: buck5 { |
| regulator-name = "vdd_ram_0v85"; |
| regulator-min-microvolt = <850000>; |
| regulator-max-microvolt = <850000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldob1: ldo1 { |
| regulator-name = "vdd_sd_dv"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldob2: ldo2 { |
| regulator-name = "vdd_usb_3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldob3: ldo3 { |
| regulator-name = "vdd_io_1v8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldob4: ldo4 { |
| regulator-name = "vda_pll_1v8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| }; |
| |
| &mcu_uart0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mcu_uart0_pins_default>; |
| }; |
| |
| &main_uart0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&main_uart0_pins_default>; |
| /* Shared with ATF on this platform */ |
| power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; |
| }; |
| |
| &main_uart1 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&main_uart1_pins_default>; |
| }; |
| |
| &main_sdhci1 { |
| /* SD Card */ |
| status = "okay"; |
| vmmc-supply = <&vdd_mmc1>; |
| vqmmc-supply = <&vdd_sd_dv_alt>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&main_mmc1_pins_default>; |
| ti,driver-strength-ohm = <50>; |
| disable-wp; |
| }; |
| |
| &ospi0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; |
| |
| flash@0 { |
| compatible = "jedec,spi-nor"; |
| reg = <0x0>; |
| spi-tx-bus-width = <8>; |
| spi-rx-bus-width = <8>; |
| spi-max-frequency = <25000000>; |
| cdns,tshsl-ns = <60>; |
| cdns,tsd2d-ns = <60>; |
| cdns,tchsh-ns = <60>; |
| cdns,tslch-ns = <60>; |
| cdns,read-delay = <4>; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| partition@0 { |
| label = "ospi.tiboot3"; |
| reg = <0x0 0x80000>; |
| }; |
| |
| partition@80000 { |
| label = "ospi.tispl"; |
| reg = <0x80000 0x200000>; |
| }; |
| |
| partition@280000 { |
| label = "ospi.u-boot"; |
| reg = <0x280000 0x400000>; |
| }; |
| |
| partition@680000 { |
| label = "ospi.env"; |
| reg = <0x680000 0x40000>; |
| }; |
| |
| partition@6c0000 { |
| label = "ospi.sysfw"; |
| reg = <0x6c0000 0x100000>; |
| }; |
| |
| partition@7c0000 { |
| label = "ospi.env.backup"; |
| reg = <0x7c0000 0x40000>; |
| }; |
| |
| partition@800000 { |
| label = "ospi.rootfs"; |
| reg = <0x800000 0x37c0000>; |
| }; |
| |
| partition@3fc0000 { |
| label = "ospi.phypattern"; |
| reg = <0x3fc0000 0x40000>; |
| }; |
| }; |
| }; |
| }; |
| |
| &main_i2c0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&main_i2c0_pins_default>; |
| clock-frequency = <400000>; |
| |
| i2c-mux@71 { |
| compatible = "nxp,pca9543"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x71>; |
| |
| /* PCIe1 M.2 M Key I2C */ |
| i2c@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| }; |
| |
| /* PCIe0 M.2 E Key I2C */ |
| i2c@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| }; |
| }; |
| }; |
| |
| &main_i2c1 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&main_i2c1_pins_default>; |
| /* i2c1 is used for DVI DDC, so we need to use 100kHz */ |
| clock-frequency = <100000>; |
| }; |
| |
| &main_i2c3 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&main_i2c3_pins_default>; |
| clock-frequency = <400000>; |
| |
| i2c-mux@70 { |
| compatible = "nxp,pca9543"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x70>; |
| |
| /* CSI0 I2C */ |
| cam0_i2c: i2c@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| }; |
| |
| /* CSI1 I2C */ |
| cam1_i2c: i2c@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| }; |
| }; |
| }; |
| |
| &main_i2c5 { |
| /* Brought out on RPi Header */ |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&main_i2c5_pins_default>; |
| clock-frequency = <400000>; |
| }; |
| |
| &main_gpio0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&rpi_header_gpio0_pins_default>; |
| }; |
| |
| &main_gpio1 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&rpi_header_gpio1_pins_default>; |
| }; |
| |
| &wkup_gpio0 { |
| status = "okay"; |
| }; |
| |
| &usb_serdes_mux { |
| idle-states = <1>, <1>; /* USB0 to SERDES3, USB1 to SERDES2 */ |
| }; |
| |
| &serdes_ln_ctrl { |
| idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_IP4_UNUSED>, |
| <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>, |
| <J721E_SERDES2_LANE0_IP1_UNUSED>, <J721E_SERDES2_LANE1_USB3_1>, |
| <J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>, |
| <J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>, |
| <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>; |
| }; |
| |
| &serdes_wiz3 { |
| typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_HIGH>; |
| typec-dir-debounce-ms = <700>; /* TUSB321, tCCB_DEFAULT 133 ms */ |
| }; |
| |
| &serdes3 { |
| serdes3_usb_link: phy@0 { |
| reg = <0>; |
| cdns,num-lanes = <2>; |
| #phy-cells = <0>; |
| cdns,phy-type = <PHY_TYPE_USB3>; |
| resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>; |
| }; |
| }; |
| |
| &serdes4 { |
| torrent_phy_dp: phy@0 { |
| reg = <0>; |
| resets = <&serdes_wiz4 1>; |
| cdns,phy-type = <PHY_TYPE_DP>; |
| cdns,num-lanes = <4>; |
| cdns,max-bit-rate = <5400>; |
| #phy-cells = <0>; |
| }; |
| }; |
| |
| &mhdp { |
| phys = <&torrent_phy_dp>; |
| phy-names = "dpphy"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&dp0_pins_default>; |
| }; |
| |
| &usbss0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&main_usbss0_pins_default>; |
| ti,vbus-divider; |
| }; |
| |
| &usb0 { |
| dr_mode = "otg"; |
| maximum-speed = "super-speed"; |
| phys = <&serdes3_usb_link>; |
| phy-names = "cdns3,usb3-phy"; |
| }; |
| |
| &serdes2 { |
| serdes2_usb_link: phy@1 { |
| reg = <1>; |
| cdns,num-lanes = <1>; |
| #phy-cells = <0>; |
| cdns,phy-type = <PHY_TYPE_USB3>; |
| resets = <&serdes_wiz2 2>; |
| }; |
| }; |
| |
| &usbss1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&main_usbss1_pins_default>; |
| ti,vbus-divider; |
| }; |
| |
| &usb1 { |
| dr_mode = "host"; |
| maximum-speed = "super-speed"; |
| phys = <&serdes2_usb_link>; |
| phy-names = "cdns3,usb3-phy"; |
| }; |
| |
| &mcu_cpsw { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>; |
| }; |
| |
| &davinci_mdio { |
| phy0: ethernet-phy@0 { |
| reg = <0>; |
| ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; |
| ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; |
| }; |
| }; |
| |
| &cpsw_port1 { |
| phy-mode = "rgmii-rxid"; |
| phy-handle = <&phy0>; |
| }; |
| |
| &dss { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&dss_vout0_pins_default>; |
| |
| assigned-clocks = <&k3_clks 152 1>, /* VP 1 pixel clock */ |
| <&k3_clks 152 4>, /* VP 2 pixel clock */ |
| <&k3_clks 152 9>, /* VP 3 pixel clock */ |
| <&k3_clks 152 13>; /* VP 4 pixel clock */ |
| assigned-clock-parents = <&k3_clks 152 2>, /* PLL16_HSDIV0 */ |
| <&k3_clks 152 6>, /* DPI0_EXT_CLKSEL_OUT0 */ |
| <&k3_clks 152 11>, /* PLL18_HSDIV0 */ |
| <&k3_clks 152 18>; /* DPI1_EXT_CLKSEL_OUT0 */ |
| }; |
| |
| &dss_ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| dpi0_out: endpoint { |
| remote-endpoint = <&dp0_in>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| dpi1_out: endpoint { |
| remote-endpoint = <&tfp410_in>; |
| }; |
| }; |
| }; |
| |
| &dp0_ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| dp0_in: endpoint { |
| remote-endpoint = <&dpi0_out>; |
| }; |
| }; |
| |
| port@4 { |
| reg = <4>; |
| dp0_out: endpoint { |
| remote-endpoint = <&dp_connector_in>; |
| }; |
| }; |
| }; |
| |
| &serdes0 { |
| serdes0_pcie_link: phy@0 { |
| reg = <0>; |
| cdns,num-lanes = <1>; |
| #phy-cells = <0>; |
| cdns,phy-type = <PHY_TYPE_PCIE>; |
| resets = <&serdes_wiz0 1>; |
| }; |
| }; |
| |
| &serdes1 { |
| serdes1_pcie_link: phy@0 { |
| reg = <0>; |
| cdns,num-lanes = <2>; |
| #phy-cells = <0>; |
| cdns,phy-type = <PHY_TYPE_PCIE>; |
| resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>; |
| }; |
| }; |
| |
| &pcie0_rc { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&ekey_reset_pins_default>; |
| reset-gpios = <&main_gpio0 72 GPIO_ACTIVE_HIGH>; |
| |
| phys = <&serdes0_pcie_link>; |
| phy-names = "pcie-phy"; |
| num-lanes = <1>; |
| }; |
| |
| &pcie1_rc { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mkey_reset_pins_default>; |
| reset-gpios = <&wkup_gpio0 11 GPIO_ACTIVE_HIGH>; |
| |
| phys = <&serdes1_pcie_link>; |
| phy-names = "pcie-phy"; |
| num-lanes = <2>; |
| }; |
| |
| &ufs_wrapper { |
| status = "disabled"; |
| }; |
| |
| &mailbox0_cluster0 { |
| status = "okay"; |
| interrupts = <436>; |
| |
| mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { |
| ti,mbox-rx = <0 0 0>; |
| ti,mbox-tx = <1 0 0>; |
| }; |
| |
| mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { |
| ti,mbox-rx = <2 0 0>; |
| ti,mbox-tx = <3 0 0>; |
| }; |
| }; |
| |
| &mailbox0_cluster1 { |
| status = "okay"; |
| interrupts = <432>; |
| |
| mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { |
| ti,mbox-rx = <0 0 0>; |
| ti,mbox-tx = <1 0 0>; |
| }; |
| |
| mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { |
| ti,mbox-rx = <2 0 0>; |
| ti,mbox-tx = <3 0 0>; |
| }; |
| }; |
| |
| &mailbox0_cluster2 { |
| status = "okay"; |
| interrupts = <428>; |
| |
| mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { |
| ti,mbox-rx = <0 0 0>; |
| ti,mbox-tx = <1 0 0>; |
| }; |
| |
| mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { |
| ti,mbox-rx = <2 0 0>; |
| ti,mbox-tx = <3 0 0>; |
| }; |
| }; |
| |
| &mailbox0_cluster3 { |
| status = "okay"; |
| interrupts = <424>; |
| |
| mbox_c66_0: mbox-c66-0 { |
| ti,mbox-rx = <0 0 0>; |
| ti,mbox-tx = <1 0 0>; |
| }; |
| |
| mbox_c66_1: mbox-c66-1 { |
| ti,mbox-rx = <2 0 0>; |
| ti,mbox-tx = <3 0 0>; |
| }; |
| }; |
| |
| &mailbox0_cluster4 { |
| status = "okay"; |
| interrupts = <420>; |
| |
| mbox_c71_0: mbox-c71-0 { |
| ti,mbox-rx = <0 0 0>; |
| ti,mbox-tx = <1 0 0>; |
| }; |
| }; |
| |
| &mcu_r5fss0_core0 { |
| mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; |
| memory-region = <&mcu_r5fss0_core0_dma_memory_region>, |
| <&mcu_r5fss0_core0_memory_region>; |
| }; |
| |
| &mcu_r5fss0_core1 { |
| mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; |
| memory-region = <&mcu_r5fss0_core1_dma_memory_region>, |
| <&mcu_r5fss0_core1_memory_region>; |
| }; |
| |
| &main_r5fss0_core0 { |
| mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; |
| memory-region = <&main_r5fss0_core0_dma_memory_region>, |
| <&main_r5fss0_core0_memory_region>; |
| }; |
| |
| &main_r5fss0_core1 { |
| mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; |
| memory-region = <&main_r5fss0_core1_dma_memory_region>, |
| <&main_r5fss0_core1_memory_region>; |
| }; |
| |
| &main_r5fss1_core0 { |
| mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>; |
| memory-region = <&main_r5fss1_core0_dma_memory_region>, |
| <&main_r5fss1_core0_memory_region>; |
| }; |
| |
| &main_r5fss1_core1 { |
| mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>; |
| memory-region = <&main_r5fss1_core1_dma_memory_region>, |
| <&main_r5fss1_core1_memory_region>; |
| }; |
| |
| &c66_0 { |
| status = "okay"; |
| mboxes = <&mailbox0_cluster3 &mbox_c66_0>; |
| memory-region = <&c66_0_dma_memory_region>, |
| <&c66_0_memory_region>; |
| }; |
| |
| &c66_1 { |
| status = "okay"; |
| mboxes = <&mailbox0_cluster3 &mbox_c66_1>; |
| memory-region = <&c66_1_dma_memory_region>, |
| <&c66_1_memory_region>; |
| }; |
| |
| &c71_0 { |
| status = "okay"; |
| mboxes = <&mailbox0_cluster4 &mbox_c71_0>; |
| memory-region = <&c71_0_dma_memory_region>, |
| <&c71_0_memory_region>; |
| }; |