| config ARCH_LS1021A |
| bool |
| select FSL_DEVICE_DISABLE |
| select FSL_IFC if !QSPI_BOOT && !SD_BOOT_QSPI |
| select LS102XA_STREAM_ID |
| select SYS_FSL_DDR_BE if SYS_FSL_DDR |
| select SYS_FSL_DDR_VER_50 if SYS_FSL_DDR |
| select SYS_FSL_IFC_BE |
| select SYS_FSL_ERRATUM_A008378 |
| select SYS_FSL_ERRATUM_A008407 |
| select SYS_FSL_ERRATUM_A008850 if SYS_FSL_DDR |
| select SYS_FSL_ERRATUM_A008997 if USB |
| select SYS_FSL_ERRATUM_A009008 if USB |
| select SYS_FSL_ERRATUM_A009663 |
| select SYS_FSL_ERRATUM_A009798 if USB |
| select SYS_FSL_ERRATUM_A009942 |
| select SYS_FSL_ERRATUM_A010315 |
| select SYS_FSL_ESDHC_BE |
| select SYS_FSL_HAS_CCI400 |
| select SYS_FSL_HAS_DDR3 if SYS_FSL_DDR |
| select SYS_FSL_HAS_DDR4 if SYS_FSL_DDR |
| select SYS_FSL_HAS_SEC |
| select SYS_FSL_SEC_COMPAT_5 |
| select SYS_FSL_SEC_LE |
| select SYS_FSL_SRDS_1 |
| select SYS_HAS_SERDES |
| select SYS_I2C_MXC |
| imply CMD_PCI |
| imply SCSI |
| imply SCSI_AHCI |
| |
| menu "LS102xA architecture" |
| depends on ARCH_LS1021A |
| |
| config FSL_DEVICE_DISABLE |
| bool |
| |
| config LS1_DEEP_SLEEP |
| bool "Deep sleep" |
| |
| config LS102XA_STREAM_ID |
| bool |
| |
| config MAX_CPUS |
| int "Maximum number of CPUs permitted for LS102xA" |
| default 2 |
| help |
| Set this number to the maximum number of possible CPUs in the SoC. |
| SoCs may have multiple clusters with each cluster may have multiple |
| ports. If some ports are reserved but higher ports are used for |
| cores, count the reserved ports. This will allocate enough memory |
| in spin table to properly handle all cores. |
| |
| config PEN_ADDR_BIG_ENDIAN |
| bool |
| |
| config SYS_CCI400_OFFSET |
| hex "Offset for CCI400 base" |
| depends on SYS_FSL_HAS_CCI400 |
| default 0x180000 |
| help |
| Offset for CCI400 base. |
| CCI400 base addr = CCSRBAR + CCI400_OFFSET |
| |
| config SYS_FSL_ERRATUM_A008850 |
| bool |
| help |
| Workaround for DDR erratum A008850 |
| |
| config SYS_FSL_ERRATUM_A008997 |
| bool |
| help |
| Workaround for USB PHY erratum A008997 |
| |
| config SYS_FSL_ERRATUM_A009007 |
| bool |
| help |
| Workaround for USB PHY erratum A009007 |
| |
| config SYS_FSL_ERRATUM_A009008 |
| bool |
| help |
| Workaround for USB PHY erratum A009008 |
| |
| config SYS_FSL_ERRATUM_A009798 |
| bool |
| help |
| Workaround for USB PHY erratum A009798 |
| |
| config SYS_FSL_ERRATUM_A010315 |
| bool "Workaround for PCIe erratum A010315" |
| |
| config SYS_FSL_HAS_CCI400 |
| bool |
| |
| config SYS_FSL_ERRATUM_A008407 |
| bool |
| |
| config SYS_FSL_QSPI_SKIP_CLKSEL |
| bool "Skip setting QSPI clock during SoC init" |
| help |
| To improve startup times when booting from QSPI flash, the QSPI |
| frequency can be set very early in the boot process. If this option |
| is enabled, the QSPI frequency will not be changed by U-Boot during |
| SoC initialization. |
| |
| endmenu |