| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Generic PHY Management code |
| * |
| * Copyright 2011 Freescale Semiconductor, Inc. |
| * author Andy Fleming |
| * |
| * Based loosely off of Linux's PHY Lib |
| */ |
| #include <common.h> |
| #include <console.h> |
| #include <dm.h> |
| #include <log.h> |
| #include <malloc.h> |
| #include <net.h> |
| #include <command.h> |
| #include <miiphy.h> |
| #include <phy.h> |
| #include <errno.h> |
| #include <asm/global_data.h> |
| #include <dm/of_extra.h> |
| #include <linux/bitops.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/compiler.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* Generic PHY support and helper functions */ |
| |
| /** |
| * genphy_config_advert - sanitize and advertise auto-negotiation parameters |
| * @phydev: target phy_device struct |
| * |
| * Description: Writes MII_ADVERTISE with the appropriate values, |
| * after sanitizing the values to make sure we only advertise |
| * what is supported. Returns < 0 on error, 0 if the PHY's advertisement |
| * hasn't changed, and > 0 if it has changed. |
| */ |
| static int genphy_config_advert(struct phy_device *phydev) |
| { |
| u32 advertise; |
| int oldadv, adv, bmsr; |
| int err, changed = 0; |
| |
| /* Only allow advertising what this PHY supports */ |
| phydev->advertising &= phydev->supported; |
| advertise = phydev->advertising; |
| |
| /* Setup standard advertisement */ |
| adv = phy_read(phydev, MDIO_DEVAD_NONE, MII_ADVERTISE); |
| oldadv = adv; |
| |
| if (adv < 0) |
| return adv; |
| |
| adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP | |
| ADVERTISE_PAUSE_ASYM); |
| if (advertise & ADVERTISED_10baseT_Half) |
| adv |= ADVERTISE_10HALF; |
| if (advertise & ADVERTISED_10baseT_Full) |
| adv |= ADVERTISE_10FULL; |
| if (advertise & ADVERTISED_100baseT_Half) |
| adv |= ADVERTISE_100HALF; |
| if (advertise & ADVERTISED_100baseT_Full) |
| adv |= ADVERTISE_100FULL; |
| if (advertise & ADVERTISED_Pause) |
| adv |= ADVERTISE_PAUSE_CAP; |
| if (advertise & ADVERTISED_Asym_Pause) |
| adv |= ADVERTISE_PAUSE_ASYM; |
| if (advertise & ADVERTISED_1000baseX_Half) |
| adv |= ADVERTISE_1000XHALF; |
| if (advertise & ADVERTISED_1000baseX_Full) |
| adv |= ADVERTISE_1000XFULL; |
| |
| if (adv != oldadv) { |
| err = phy_write(phydev, MDIO_DEVAD_NONE, MII_ADVERTISE, adv); |
| |
| if (err < 0) |
| return err; |
| changed = 1; |
| } |
| |
| bmsr = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR); |
| if (bmsr < 0) |
| return bmsr; |
| |
| /* Per 802.3-2008, Section 22.2.4.2.16 Extended status all |
| * 1000Mbits/sec capable PHYs shall have the BMSR_ESTATEN bit set to a |
| * logical 1. |
| */ |
| if (!(bmsr & BMSR_ESTATEN)) |
| return changed; |
| |
| /* Configure gigabit if it's supported */ |
| adv = phy_read(phydev, MDIO_DEVAD_NONE, MII_CTRL1000); |
| oldadv = adv; |
| |
| if (adv < 0) |
| return adv; |
| |
| adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); |
| |
| if (phydev->supported & (SUPPORTED_1000baseT_Half | |
| SUPPORTED_1000baseT_Full)) { |
| if (advertise & SUPPORTED_1000baseT_Half) |
| adv |= ADVERTISE_1000HALF; |
| if (advertise & SUPPORTED_1000baseT_Full) |
| adv |= ADVERTISE_1000FULL; |
| } |
| |
| if (adv != oldadv) |
| changed = 1; |
| |
| err = phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, adv); |
| if (err < 0) |
| return err; |
| |
| return changed; |
| } |
| |
| /** |
| * genphy_setup_forced - configures/forces speed/duplex from @phydev |
| * @phydev: target phy_device struct |
| * |
| * Description: Configures MII_BMCR to force speed/duplex |
| * to the values in phydev. Assumes that the values are valid. |
| */ |
| static int genphy_setup_forced(struct phy_device *phydev) |
| { |
| int err; |
| int ctl = BMCR_ANRESTART; |
| |
| phydev->pause = 0; |
| phydev->asym_pause = 0; |
| |
| if (phydev->speed == SPEED_1000) |
| ctl |= BMCR_SPEED1000; |
| else if (phydev->speed == SPEED_100) |
| ctl |= BMCR_SPEED100; |
| |
| if (phydev->duplex == DUPLEX_FULL) |
| ctl |= BMCR_FULLDPLX; |
| |
| err = phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, ctl); |
| |
| return err; |
| } |
| |
| /** |
| * genphy_restart_aneg - Enable and Restart Autonegotiation |
| * @phydev: target phy_device struct |
| */ |
| int genphy_restart_aneg(struct phy_device *phydev) |
| { |
| int ctl; |
| |
| ctl = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); |
| |
| if (ctl < 0) |
| return ctl; |
| |
| ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); |
| |
| /* Don't isolate the PHY if we're negotiating */ |
| ctl &= ~(BMCR_ISOLATE); |
| |
| ctl = phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, ctl); |
| |
| return ctl; |
| } |
| |
| /** |
| * genphy_config_aneg - restart auto-negotiation or write BMCR |
| * @phydev: target phy_device struct |
| * |
| * Description: If auto-negotiation is enabled, we configure the |
| * advertising, and then restart auto-negotiation. If it is not |
| * enabled, then we write the BMCR. |
| */ |
| int genphy_config_aneg(struct phy_device *phydev) |
| { |
| int result; |
| |
| if (phydev->autoneg != AUTONEG_ENABLE) |
| return genphy_setup_forced(phydev); |
| |
| result = genphy_config_advert(phydev); |
| |
| if (result < 0) /* error */ |
| return result; |
| |
| if (result == 0) { |
| /* |
| * Advertisment hasn't changed, but maybe aneg was never on to |
| * begin with? Or maybe phy was isolated? |
| */ |
| int ctl = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); |
| |
| if (ctl < 0) |
| return ctl; |
| |
| if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE)) |
| result = 1; /* do restart aneg */ |
| } |
| |
| /* |
| * Only restart aneg if we are advertising something different |
| * than we were before. |
| */ |
| if (result > 0) |
| result = genphy_restart_aneg(phydev); |
| |
| return result; |
| } |
| |
| /** |
| * genphy_update_link - update link status in @phydev |
| * @phydev: target phy_device struct |
| * |
| * Description: Update the value in phydev->link to reflect the |
| * current link value. In order to do this, we need to read |
| * the status register twice, keeping the second value. |
| */ |
| int genphy_update_link(struct phy_device *phydev) |
| { |
| unsigned int mii_reg; |
| |
| /* |
| * Wait if the link is up, and autonegotiation is in progress |
| * (ie - we're capable and it's not done) |
| */ |
| mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR); |
| |
| /* |
| * If we already saw the link up, and it hasn't gone down, then |
| * we don't need to wait for autoneg again |
| */ |
| if (phydev->link && mii_reg & BMSR_LSTATUS) |
| return 0; |
| |
| if ((phydev->autoneg == AUTONEG_ENABLE) && |
| !(mii_reg & BMSR_ANEGCOMPLETE)) { |
| int i = 0; |
| |
| printf("%s Waiting for PHY auto negotiation to complete", |
| phydev->dev->name); |
| while (!(mii_reg & BMSR_ANEGCOMPLETE)) { |
| /* |
| * Timeout reached ? |
| */ |
| if (i > (PHY_ANEG_TIMEOUT / 50)) { |
| printf(" TIMEOUT !\n"); |
| phydev->link = 0; |
| return -ETIMEDOUT; |
| } |
| |
| if (ctrlc()) { |
| puts("user interrupt!\n"); |
| phydev->link = 0; |
| return -EINTR; |
| } |
| |
| if ((i++ % 10) == 0) |
| printf("."); |
| |
| mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR); |
| mdelay(50); /* 50 ms */ |
| } |
| printf(" done\n"); |
| phydev->link = 1; |
| } else { |
| /* Read the link a second time to clear the latched state */ |
| mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR); |
| |
| if (mii_reg & BMSR_LSTATUS) |
| phydev->link = 1; |
| else |
| phydev->link = 0; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Generic function which updates the speed and duplex. If |
| * autonegotiation is enabled, it uses the AND of the link |
| * partner's advertised capabilities and our advertised |
| * capabilities. If autonegotiation is disabled, we use the |
| * appropriate bits in the control register. |
| * |
| * Stolen from Linux's mii.c and phy_device.c |
| */ |
| int genphy_parse_link(struct phy_device *phydev) |
| { |
| int mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR); |
| |
| /* We're using autonegotiation */ |
| if (phydev->autoneg == AUTONEG_ENABLE) { |
| u32 lpa = 0; |
| int gblpa = 0; |
| u32 estatus = 0; |
| |
| /* Check for gigabit capability */ |
| if (phydev->supported & (SUPPORTED_1000baseT_Full | |
| SUPPORTED_1000baseT_Half)) { |
| /* We want a list of states supported by |
| * both PHYs in the link |
| */ |
| gblpa = phy_read(phydev, MDIO_DEVAD_NONE, MII_STAT1000); |
| if (gblpa < 0) { |
| debug("Could not read MII_STAT1000. "); |
| debug("Ignoring gigabit capability\n"); |
| gblpa = 0; |
| } |
| gblpa &= phy_read(phydev, |
| MDIO_DEVAD_NONE, MII_CTRL1000) << 2; |
| } |
| |
| /* Set the baseline so we only have to set them |
| * if they're different |
| */ |
| phydev->speed = SPEED_10; |
| phydev->duplex = DUPLEX_HALF; |
| |
| /* Check the gigabit fields */ |
| if (gblpa & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) { |
| phydev->speed = SPEED_1000; |
| |
| if (gblpa & PHY_1000BTSR_1000FD) |
| phydev->duplex = DUPLEX_FULL; |
| |
| /* We're done! */ |
| return 0; |
| } |
| |
| lpa = phy_read(phydev, MDIO_DEVAD_NONE, MII_ADVERTISE); |
| lpa &= phy_read(phydev, MDIO_DEVAD_NONE, MII_LPA); |
| |
| if (lpa & (LPA_100FULL | LPA_100HALF)) { |
| phydev->speed = SPEED_100; |
| |
| if (lpa & LPA_100FULL) |
| phydev->duplex = DUPLEX_FULL; |
| |
| } else if (lpa & LPA_10FULL) { |
| phydev->duplex = DUPLEX_FULL; |
| } |
| |
| /* |
| * Extended status may indicate that the PHY supports |
| * 1000BASE-T/X even though the 1000BASE-T registers |
| * are missing. In this case we can't tell whether the |
| * peer also supports it, so we only check extended |
| * status if the 1000BASE-T registers are actually |
| * missing. |
| */ |
| if ((mii_reg & BMSR_ESTATEN) && !(mii_reg & BMSR_ERCAP)) |
| estatus = phy_read(phydev, MDIO_DEVAD_NONE, |
| MII_ESTATUS); |
| |
| if (estatus & (ESTATUS_1000_XFULL | ESTATUS_1000_XHALF | |
| ESTATUS_1000_TFULL | ESTATUS_1000_THALF)) { |
| phydev->speed = SPEED_1000; |
| if (estatus & (ESTATUS_1000_XFULL | ESTATUS_1000_TFULL)) |
| phydev->duplex = DUPLEX_FULL; |
| } |
| |
| } else { |
| u32 bmcr = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); |
| |
| phydev->speed = SPEED_10; |
| phydev->duplex = DUPLEX_HALF; |
| |
| if (bmcr & BMCR_FULLDPLX) |
| phydev->duplex = DUPLEX_FULL; |
| |
| if (bmcr & BMCR_SPEED1000) |
| phydev->speed = SPEED_1000; |
| else if (bmcr & BMCR_SPEED100) |
| phydev->speed = SPEED_100; |
| } |
| |
| return 0; |
| } |
| |
| int genphy_config(struct phy_device *phydev) |
| { |
| int val; |
| u32 features; |
| |
| features = (SUPPORTED_TP | SUPPORTED_MII |
| | SUPPORTED_AUI | SUPPORTED_FIBRE | |
| SUPPORTED_BNC); |
| |
| /* Do we support autonegotiation? */ |
| val = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR); |
| |
| if (val < 0) |
| return val; |
| |
| if (val & BMSR_ANEGCAPABLE) |
| features |= SUPPORTED_Autoneg; |
| |
| if (val & BMSR_100FULL) |
| features |= SUPPORTED_100baseT_Full; |
| if (val & BMSR_100HALF) |
| features |= SUPPORTED_100baseT_Half; |
| if (val & BMSR_10FULL) |
| features |= SUPPORTED_10baseT_Full; |
| if (val & BMSR_10HALF) |
| features |= SUPPORTED_10baseT_Half; |
| |
| if (val & BMSR_ESTATEN) { |
| val = phy_read(phydev, MDIO_DEVAD_NONE, MII_ESTATUS); |
| |
| if (val < 0) |
| return val; |
| |
| if (val & ESTATUS_1000_TFULL) |
| features |= SUPPORTED_1000baseT_Full; |
| if (val & ESTATUS_1000_THALF) |
| features |= SUPPORTED_1000baseT_Half; |
| if (val & ESTATUS_1000_XFULL) |
| features |= SUPPORTED_1000baseX_Full; |
| if (val & ESTATUS_1000_XHALF) |
| features |= SUPPORTED_1000baseX_Half; |
| } |
| |
| phydev->supported &= features; |
| phydev->advertising &= features; |
| |
| genphy_config_aneg(phydev); |
| |
| return 0; |
| } |
| |
| int genphy_startup(struct phy_device *phydev) |
| { |
| int ret; |
| |
| ret = genphy_update_link(phydev); |
| if (ret) |
| return ret; |
| |
| return genphy_parse_link(phydev); |
| } |
| |
| int genphy_shutdown(struct phy_device *phydev) |
| { |
| return 0; |
| } |
| |
| static struct phy_driver genphy_driver = { |
| .uid = 0xffffffff, |
| .mask = 0xffffffff, |
| .name = "Generic PHY", |
| .features = PHY_GBIT_FEATURES | SUPPORTED_MII | |
| SUPPORTED_AUI | SUPPORTED_FIBRE | |
| SUPPORTED_BNC, |
| .config = genphy_config, |
| .startup = genphy_startup, |
| .shutdown = genphy_shutdown, |
| }; |
| |
| static int genphy_init(void) |
| { |
| return phy_register(&genphy_driver); |
| } |
| |
| static LIST_HEAD(phy_drivers); |
| |
| int phy_init(void) |
| { |
| #ifdef CONFIG_NEEDS_MANUAL_RELOC |
| /* |
| * The pointers inside phy_drivers also needs to be updated incase of |
| * manual reloc, without which these points to some invalid |
| * pre reloc address and leads to invalid accesses, hangs. |
| */ |
| struct list_head *head = &phy_drivers; |
| |
| head->next = (void *)head->next + gd->reloc_off; |
| head->prev = (void *)head->prev + gd->reloc_off; |
| #endif |
| |
| #ifdef CONFIG_B53_SWITCH |
| phy_b53_init(); |
| #endif |
| #ifdef CONFIG_MV88E61XX_SWITCH |
| phy_mv88e61xx_init(); |
| #endif |
| #ifdef CONFIG_PHY_ADIN |
| phy_adin_init(); |
| #endif |
| #ifdef CONFIG_PHY_AQUANTIA |
| phy_aquantia_init(); |
| #endif |
| #ifdef CONFIG_PHY_ATHEROS |
| phy_atheros_init(); |
| #endif |
| #ifdef CONFIG_PHY_BROADCOM |
| phy_broadcom_init(); |
| #endif |
| #ifdef CONFIG_PHY_CORTINA |
| phy_cortina_init(); |
| #endif |
| #ifdef CONFIG_PHY_CORTINA_ACCESS |
| phy_cortina_access_init(); |
| #endif |
| #ifdef CONFIG_PHY_DAVICOM |
| phy_davicom_init(); |
| #endif |
| #ifdef CONFIG_PHY_ET1011C |
| phy_et1011c_init(); |
| #endif |
| #ifdef CONFIG_PHY_LXT |
| phy_lxt_init(); |
| #endif |
| #ifdef CONFIG_PHY_MARVELL |
| phy_marvell_init(); |
| #endif |
| #ifdef CONFIG_PHY_MICREL_KSZ8XXX |
| phy_micrel_ksz8xxx_init(); |
| #endif |
| #ifdef CONFIG_PHY_MICREL_KSZ90X1 |
| phy_micrel_ksz90x1_init(); |
| #endif |
| #ifdef CONFIG_PHY_MESON_GXL |
| phy_meson_gxl_init(); |
| #endif |
| #ifdef CONFIG_PHY_NATSEMI |
| phy_natsemi_init(); |
| #endif |
| #ifdef CONFIG_NXP_C45_TJA11XX_PHY |
| phy_nxp_tja11xx_init(); |
| #endif |
| #ifdef CONFIG_PHY_REALTEK |
| phy_realtek_init(); |
| #endif |
| #ifdef CONFIG_PHY_SMSC |
| phy_smsc_init(); |
| #endif |
| #ifdef CONFIG_PHY_TERANETICS |
| phy_teranetics_init(); |
| #endif |
| #ifdef CONFIG_PHY_TI |
| phy_ti_init(); |
| #endif |
| #ifdef CONFIG_PHY_VITESSE |
| phy_vitesse_init(); |
| #endif |
| #ifdef CONFIG_PHY_XILINX |
| phy_xilinx_init(); |
| #endif |
| #ifdef CONFIG_PHY_MSCC |
| phy_mscc_init(); |
| #endif |
| #ifdef CONFIG_PHY_FIXED |
| phy_fixed_init(); |
| #endif |
| #ifdef CONFIG_PHY_NCSI |
| phy_ncsi_init(); |
| #endif |
| #ifdef CONFIG_PHY_XILINX_GMII2RGMII |
| phy_xilinx_gmii2rgmii_init(); |
| #endif |
| genphy_init(); |
| |
| return 0; |
| } |
| |
| int phy_register(struct phy_driver *drv) |
| { |
| INIT_LIST_HEAD(&drv->list); |
| list_add_tail(&drv->list, &phy_drivers); |
| |
| #ifdef CONFIG_NEEDS_MANUAL_RELOC |
| if (drv->probe) |
| drv->probe += gd->reloc_off; |
| if (drv->config) |
| drv->config += gd->reloc_off; |
| if (drv->startup) |
| drv->startup += gd->reloc_off; |
| if (drv->shutdown) |
| drv->shutdown += gd->reloc_off; |
| if (drv->readext) |
| drv->readext += gd->reloc_off; |
| if (drv->writeext) |
| drv->writeext += gd->reloc_off; |
| if (drv->read_mmd) |
| drv->read_mmd += gd->reloc_off; |
| if (drv->write_mmd) |
| drv->write_mmd += gd->reloc_off; |
| #endif |
| return 0; |
| } |
| |
| int phy_set_supported(struct phy_device *phydev, u32 max_speed) |
| { |
| /* The default values for phydev->supported are provided by the PHY |
| * driver "features" member, we want to reset to sane defaults first |
| * before supporting higher speeds. |
| */ |
| phydev->supported &= PHY_DEFAULT_FEATURES; |
| |
| switch (max_speed) { |
| default: |
| return -ENOTSUPP; |
| case SPEED_1000: |
| phydev->supported |= PHY_1000BT_FEATURES; |
| /* fall through */ |
| case SPEED_100: |
| phydev->supported |= PHY_100BT_FEATURES; |
| /* fall through */ |
| case SPEED_10: |
| phydev->supported |= PHY_10BT_FEATURES; |
| } |
| |
| return 0; |
| } |
| |
| static int phy_probe(struct phy_device *phydev) |
| { |
| int err = 0; |
| |
| phydev->advertising = phydev->drv->features; |
| phydev->supported = phydev->drv->features; |
| |
| phydev->mmds = phydev->drv->mmds; |
| |
| if (phydev->drv->probe) |
| err = phydev->drv->probe(phydev); |
| |
| return err; |
| } |
| |
| static struct phy_driver *generic_for_phy(struct phy_device *phydev) |
| { |
| #ifdef CONFIG_PHYLIB_10G |
| if (phydev->is_c45) |
| return &gen10g_driver; |
| #endif |
| |
| return &genphy_driver; |
| } |
| |
| static struct phy_driver *get_phy_driver(struct phy_device *phydev) |
| { |
| struct list_head *entry; |
| int phy_id = phydev->phy_id; |
| struct phy_driver *drv = NULL; |
| |
| list_for_each(entry, &phy_drivers) { |
| drv = list_entry(entry, struct phy_driver, list); |
| if ((drv->uid & drv->mask) == (phy_id & drv->mask)) |
| return drv; |
| } |
| |
| /* If we made it here, there's no driver for this PHY */ |
| return generic_for_phy(phydev); |
| } |
| |
| struct phy_device *phy_device_create(struct mii_dev *bus, int addr, |
| u32 phy_id, bool is_c45) |
| { |
| struct phy_device *dev; |
| |
| /* |
| * We allocate the device, and initialize the |
| * default values |
| */ |
| dev = malloc(sizeof(*dev)); |
| if (!dev) { |
| printf("Failed to allocate PHY device for %s:%d\n", |
| bus ? bus->name : "(null bus)", addr); |
| return NULL; |
| } |
| |
| memset(dev, 0, sizeof(*dev)); |
| |
| dev->duplex = -1; |
| dev->link = 0; |
| dev->interface = PHY_INTERFACE_MODE_NA; |
| |
| #ifdef CONFIG_DM_ETH |
| dev->node = ofnode_null(); |
| #endif |
| |
| dev->autoneg = AUTONEG_ENABLE; |
| |
| dev->addr = addr; |
| dev->phy_id = phy_id; |
| dev->is_c45 = is_c45; |
| dev->bus = bus; |
| |
| dev->drv = get_phy_driver(dev); |
| |
| if (phy_probe(dev)) { |
| printf("%s, PHY probe failed\n", __func__); |
| return NULL; |
| } |
| |
| if (addr >= 0 && addr < PHY_MAX_ADDR && phy_id != PHY_FIXED_ID) |
| bus->phymap[addr] = dev; |
| |
| return dev; |
| } |
| |
| /** |
| * get_phy_id - reads the specified addr for its ID. |
| * @bus: the target MII bus |
| * @addr: PHY address on the MII bus |
| * @phy_id: where to store the ID retrieved. |
| * |
| * Description: Reads the ID registers of the PHY at @addr on the |
| * @bus, stores it in @phy_id and returns zero on success. |
| */ |
| int __weak get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id) |
| { |
| int phy_reg; |
| |
| /* |
| * Grab the bits from PHYIR1, and put them |
| * in the upper half |
| */ |
| phy_reg = bus->read(bus, addr, devad, MII_PHYSID1); |
| |
| if (phy_reg < 0) |
| return -EIO; |
| |
| *phy_id = (phy_reg & 0xffff) << 16; |
| |
| /* Grab the bits from PHYIR2, and put them in the lower half */ |
| phy_reg = bus->read(bus, addr, devad, MII_PHYSID2); |
| |
| if (phy_reg < 0) |
| return -EIO; |
| |
| *phy_id |= (phy_reg & 0xffff); |
| |
| return 0; |
| } |
| |
| static struct phy_device *create_phy_by_mask(struct mii_dev *bus, |
| uint phy_mask, int devad) |
| { |
| u32 phy_id = 0xffffffff; |
| bool is_c45; |
| |
| while (phy_mask) { |
| int addr = ffs(phy_mask) - 1; |
| int r = get_phy_id(bus, addr, devad, &phy_id); |
| |
| /* |
| * If the PHY ID is flat 0 we ignore it. There are C45 PHYs |
| * that return all 0s for C22 reads (like Aquantia AQR112) and |
| * there are C22 PHYs that return all 0s for C45 reads (like |
| * Atheros AR8035). |
| */ |
| if (r == 0 && phy_id == 0) |
| goto next; |
| |
| /* If the PHY ID is mostly f's, we didn't find anything */ |
| if (r == 0 && (phy_id & 0x1fffffff) != 0x1fffffff) { |
| is_c45 = (devad == MDIO_DEVAD_NONE) ? false : true; |
| return phy_device_create(bus, addr, phy_id, is_c45); |
| } |
| next: |
| phy_mask &= ~(1 << addr); |
| } |
| return NULL; |
| } |
| |
| static struct phy_device *search_for_existing_phy(struct mii_dev *bus, |
| uint phy_mask) |
| { |
| /* If we have one, return the existing device, with new interface */ |
| while (phy_mask) { |
| int addr = ffs(phy_mask) - 1; |
| |
| if (bus->phymap[addr]) |
| return bus->phymap[addr]; |
| |
| phy_mask &= ~(1 << addr); |
| } |
| return NULL; |
| } |
| |
| static struct phy_device *get_phy_device_by_mask(struct mii_dev *bus, |
| uint phy_mask) |
| { |
| struct phy_device *phydev; |
| int devad[] = { |
| /* Clause-22 */ |
| MDIO_DEVAD_NONE, |
| /* Clause-45 */ |
| MDIO_MMD_PMAPMD, |
| MDIO_MMD_WIS, |
| MDIO_MMD_PCS, |
| MDIO_MMD_PHYXS, |
| MDIO_MMD_VEND1, |
| }; |
| int i, devad_cnt; |
| |
| devad_cnt = sizeof(devad)/sizeof(int); |
| phydev = search_for_existing_phy(bus, phy_mask); |
| if (phydev) |
| return phydev; |
| /* try different access clauses */ |
| for (i = 0; i < devad_cnt; i++) { |
| phydev = create_phy_by_mask(bus, phy_mask, devad[i]); |
| if (IS_ERR(phydev)) |
| return NULL; |
| if (phydev) |
| return phydev; |
| } |
| |
| debug("\n%s PHY: ", bus->name); |
| while (phy_mask) { |
| int addr = ffs(phy_mask) - 1; |
| |
| debug("%d ", addr); |
| phy_mask &= ~(1 << addr); |
| } |
| debug("not found\n"); |
| |
| return NULL; |
| } |
| |
| /** |
| * get_phy_device - reads the specified PHY device and returns its |
| * @phy_device struct |
| * @bus: the target MII bus |
| * @addr: PHY address on the MII bus |
| * |
| * Description: Reads the ID registers of the PHY at @addr on the |
| * @bus, then allocates and returns the phy_device to represent it. |
| */ |
| static struct phy_device *get_phy_device(struct mii_dev *bus, int addr) |
| { |
| return get_phy_device_by_mask(bus, 1 << addr); |
| } |
| |
| int phy_reset(struct phy_device *phydev) |
| { |
| int reg; |
| int timeout = 500; |
| int devad = MDIO_DEVAD_NONE; |
| |
| if (phydev->flags & PHY_FLAG_BROKEN_RESET) |
| return 0; |
| |
| #ifdef CONFIG_PHYLIB_10G |
| /* If it's 10G, we need to issue reset through one of the MMDs */ |
| if (phydev->is_c45) { |
| if (!phydev->mmds) |
| gen10g_discover_mmds(phydev); |
| |
| devad = ffs(phydev->mmds) - 1; |
| } |
| #endif |
| |
| if (phy_write(phydev, devad, MII_BMCR, BMCR_RESET) < 0) { |
| debug("PHY reset failed\n"); |
| return -1; |
| } |
| |
| #if CONFIG_PHY_RESET_DELAY > 0 |
| udelay(CONFIG_PHY_RESET_DELAY); /* Intel LXT971A needs this */ |
| #endif |
| /* |
| * Poll the control register for the reset bit to go to 0 (it is |
| * auto-clearing). This should happen within 0.5 seconds per the |
| * IEEE spec. |
| */ |
| reg = phy_read(phydev, devad, MII_BMCR); |
| while ((reg & BMCR_RESET) && timeout--) { |
| reg = phy_read(phydev, devad, MII_BMCR); |
| |
| if (reg < 0) { |
| debug("PHY status read failed\n"); |
| return -1; |
| } |
| udelay(1000); |
| } |
| |
| if (reg & BMCR_RESET) { |
| puts("PHY reset timed out\n"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| int miiphy_reset(const char *devname, unsigned char addr) |
| { |
| struct mii_dev *bus = miiphy_get_dev_by_name(devname); |
| struct phy_device *phydev; |
| |
| phydev = get_phy_device(bus, addr); |
| |
| return phy_reset(phydev); |
| } |
| |
| struct phy_device *phy_find_by_mask(struct mii_dev *bus, uint phy_mask) |
| { |
| /* Reset the bus */ |
| if (bus->reset) { |
| bus->reset(bus); |
| |
| /* Wait 15ms to make sure the PHY has come out of hard reset */ |
| mdelay(15); |
| } |
| |
| return get_phy_device_by_mask(bus, phy_mask); |
| } |
| |
| #ifdef CONFIG_DM_ETH |
| void phy_connect_dev(struct phy_device *phydev, struct udevice *dev, |
| phy_interface_t interface) |
| #else |
| void phy_connect_dev(struct phy_device *phydev, struct eth_device *dev, |
| phy_interface_t interface) |
| #endif |
| { |
| /* Soft Reset the PHY */ |
| phy_reset(phydev); |
| if (phydev->dev && phydev->dev != dev) { |
| printf("%s:%d is connected to %s. Reconnecting to %s\n", |
| phydev->bus->name, phydev->addr, |
| phydev->dev->name, dev->name); |
| } |
| phydev->dev = dev; |
| phydev->interface = interface; |
| debug("%s connected to %s mode %s\n", dev->name, phydev->drv->name, |
| phy_string_for_interface(interface)); |
| } |
| |
| #ifdef CONFIG_PHY_XILINX_GMII2RGMII |
| static struct phy_device *phy_connect_gmii2rgmii(struct mii_dev *bus, |
| struct udevice *dev) |
| { |
| struct phy_device *phydev = NULL; |
| ofnode node; |
| |
| ofnode_for_each_subnode(node, dev_ofnode(dev)) { |
| node = ofnode_by_compatible(node, "xlnx,gmii-to-rgmii-1.0"); |
| if (ofnode_valid(node)) { |
| phydev = phy_device_create(bus, 0, |
| PHY_GMII2RGMII_ID, false); |
| if (phydev) |
| phydev->node = node; |
| break; |
| } |
| |
| node = ofnode_first_subnode(node); |
| } |
| |
| return phydev; |
| } |
| #endif |
| |
| #ifdef CONFIG_PHY_FIXED |
| /** |
| * fixed_phy_create() - create an unconnected fixed-link pseudo-PHY device |
| * @node: OF node for the container of the fixed-link node |
| * |
| * Description: Creates a struct phy_device based on a fixed-link of_node |
| * description. Can be used without phy_connect by drivers which do not expose |
| * a UCLASS_ETH udevice. |
| */ |
| struct phy_device *fixed_phy_create(ofnode node) |
| { |
| struct phy_device *phydev; |
| ofnode subnode; |
| |
| subnode = ofnode_find_subnode(node, "fixed-link"); |
| if (!ofnode_valid(subnode)) { |
| return NULL; |
| } |
| |
| phydev = phy_device_create(NULL, 0, PHY_FIXED_ID, false); |
| if (phydev) |
| phydev->node = subnode; |
| |
| phydev->interface = ofnode_read_phy_mode(node); |
| |
| return phydev; |
| } |
| |
| static struct phy_device *phy_connect_fixed(struct mii_dev *bus, |
| struct udevice *dev) |
| { |
| ofnode node = dev_ofnode(dev), subnode; |
| struct phy_device *phydev = NULL; |
| |
| if (ofnode_phy_is_fixed_link(node, &subnode)) { |
| phydev = phy_device_create(bus, 0, PHY_FIXED_ID, false); |
| if (phydev) |
| phydev->node = subnode; |
| } |
| |
| return phydev; |
| } |
| #endif |
| |
| #ifdef CONFIG_DM_ETH |
| struct phy_device *phy_connect(struct mii_dev *bus, int addr, |
| struct udevice *dev, |
| phy_interface_t interface) |
| #else |
| struct phy_device *phy_connect(struct mii_dev *bus, int addr, |
| struct eth_device *dev, |
| phy_interface_t interface) |
| #endif |
| { |
| struct phy_device *phydev = NULL; |
| uint mask = (addr >= 0) ? (1 << addr) : 0xffffffff; |
| |
| #ifdef CONFIG_PHY_FIXED |
| phydev = phy_connect_fixed(bus, dev); |
| #endif |
| |
| #ifdef CONFIG_PHY_NCSI |
| if (!phydev) |
| phydev = phy_device_create(bus, 0, PHY_NCSI_ID, false); |
| #endif |
| |
| #ifdef CONFIG_PHY_ETHERNET_ID |
| if (!phydev) |
| phydev = phy_connect_phy_id(bus, dev); |
| #endif |
| |
| #ifdef CONFIG_PHY_XILINX_GMII2RGMII |
| if (!phydev) |
| phydev = phy_connect_gmii2rgmii(bus, dev); |
| #endif |
| |
| if (!phydev) |
| phydev = phy_find_by_mask(bus, mask); |
| |
| if (phydev) |
| phy_connect_dev(phydev, dev, interface); |
| else |
| printf("Could not get PHY for %s: addr %d\n", bus->name, addr); |
| return phydev; |
| } |
| |
| /* |
| * Start the PHY. Returns 0 on success, or a negative error code. |
| */ |
| int phy_startup(struct phy_device *phydev) |
| { |
| if (phydev->drv->startup) |
| return phydev->drv->startup(phydev); |
| |
| return 0; |
| } |
| |
| __weak int board_phy_config(struct phy_device *phydev) |
| { |
| if (phydev->drv->config) |
| return phydev->drv->config(phydev); |
| return 0; |
| } |
| |
| int phy_config(struct phy_device *phydev) |
| { |
| /* Invoke an optional board-specific helper */ |
| return board_phy_config(phydev); |
| } |
| |
| int phy_shutdown(struct phy_device *phydev) |
| { |
| if (phydev->drv->shutdown) |
| phydev->drv->shutdown(phydev); |
| |
| return 0; |
| } |