| if ROCKCHIP_RK3588 |
| |
| config TARGET_EVB_RK3588 |
| bool "Rockchip EVB1 v10" |
| select BOARD_LATE_INIT |
| help |
| RK3588 EVB is a evaluation board for Rockchp RK3588. |
| |
| config TARGET_RK3588_NEU6 |
| bool "Edgeble Neural Compute Module 6(Neu6) SoM" |
| select BOARD_LATE_INIT |
| help |
| Neu6A: |
| Neural Compute Module 6A(Neu6A) is a 96boards SoM-CB compute module |
| based on Rockchip RK3588 from Edgeble AI. |
| |
| Neu6A-IO: |
| Neural Compute Module 6A(Neu6A) IO board is an industrial form factor |
| IO board and Neu6a needs to mount on top of this IO board in order to |
| create complete Edgeble Neural Compute Module 6A(Neu6A) IO platform. |
| |
| Neu6B: |
| Neural Compute Module 6B(Neu6B) is a 96boards SoM-CB compute module |
| based on Rockchip RK3588J from Edgeble AI. |
| |
| Neu6A-IO: |
| Neural Compute Module 6B(Neu6B) IO board is an industrial form factor |
| IO board and Neu6a needs to mount on top of this IO board in order to |
| create complete Edgeble Neural Compute Module 6B(Neu6B) IO platform. |
| |
| config TARGET_ROCK5B_RK3588 |
| config TARGET_ROCK5B_RK3588 |
| bool "Radxa ROCK5B RK3588 board" |
| select BOARD_LATE_INIT |
| help |
| Radxa ROCK5B is a Rockchip RK3588 based SBC (Single Board Computer) |
| by Radxa. |
| |
| There are tree variants depending on the DRAM size : 4G, 8G and 16G. |
| |
| Specification: |
| |
| Rockchip Rk3588 SoC |
| 4x ARM Cortex-A76, 4x ARM Cortex-A55 |
| 4/8/16GB memory LPDDR4x |
| Mali G610MC4 GPU |
| 2x MIPI CSI 2 multiple lanes connector |
| eMMC module connector |
| uSD slot (up to 128GB) |
| 2x USB 2.0 Type-A, 2x USB 3.0 Type-A, 1x USB 3.0 Type-C |
| 2x HDMI 2.1 output, 1x micro HDMI input |
| 2.5 Gbps Ethernet port |
| 40-pin IO header including UART, SPI, I2C and 5V DC power in |
| USB PD over USB Type-C |
| Size: 100mm x 72mm (Pico-ITX form factor) |
| |
| config ROCKCHIP_BOOT_MODE_REG |
| default 0xfd588080 |
| |
| config ROCKCHIP_STIMER_BASE |
| default 0xfd8c8000 |
| |
| config SYS_SOC |
| default "rk3588" |
| |
| config SYS_MALLOC_F_LEN |
| default 0x80000 |
| |
| source board/edgeble/neural-compute-module-6/Kconfig |
| source board/rockchip/evb_rk3588/Kconfig |
| source board/radxa/rock5b-rk3588/Kconfig |
| |
| endif |