| /* |
| * watchdog.c - driver for i.mx on-chip watchdog |
| * |
| * Licensed under the GPL-2 or later. |
| */ |
| |
| #include <common.h> |
| #include <asm/io.h> |
| #include <watchdog.h> |
| #include <asm/arch/imx-regs.h> |
| #ifdef CONFIG_FSL_LSCH2 |
| #include <asm/arch/immap_lsch2.h> |
| #endif |
| #include <fsl_wdog.h> |
| |
| #ifdef CONFIG_IMX_WATCHDOG |
| void hw_watchdog_reset(void) |
| { |
| struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR; |
| |
| writew(0x5555, &wdog->wsr); |
| writew(0xaaaa, &wdog->wsr); |
| } |
| |
| void hw_watchdog_init(void) |
| { |
| struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR; |
| u16 timeout; |
| |
| /* |
| * The timer watchdog can be set between |
| * 0.5 and 128 Seconds. If not defined |
| * in configuration file, sets 128 Seconds |
| */ |
| #ifndef CONFIG_WATCHDOG_TIMEOUT_MSECS |
| #define CONFIG_WATCHDOG_TIMEOUT_MSECS 128000 |
| #endif |
| timeout = (CONFIG_WATCHDOG_TIMEOUT_MSECS / 500) - 1; |
| #ifdef CONFIG_FSL_LSCH2 |
| writew((WCR_WDA | WCR_SRS | WCR_WDE) << 8 | timeout, &wdog->wcr); |
| #else |
| writew(WCR_WDZST | WCR_WDBG | WCR_WDE | WCR_WDT | WCR_SRS | |
| WCR_WDA | SET_WCR_WT(timeout), &wdog->wcr); |
| #endif /* CONFIG_FSL_LSCH2*/ |
| hw_watchdog_reset(); |
| } |
| #endif |
| |
| void __attribute__((weak)) reset_cpu(ulong addr) |
| { |
| struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR; |
| |
| clrsetbits_le16(&wdog->wcr, WCR_WT_MSK, WCR_WDE); |
| |
| writew(0x5555, &wdog->wsr); |
| writew(0xaaaa, &wdog->wsr); /* load minimum 1/2 second timeout */ |
| while (1) { |
| /* |
| * spin for .5 seconds before reset |
| */ |
| } |
| } |