arch/arm/mach-mvebu/dram.c - filogic/uboot - Gitiles

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * (C) Copyright 2009
  * Marvell Semiconductor <www.marvell.com>
  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
  */

 #include <config.h>
 #include <init.h>
 #include <asm/global_data.h>
 #include <asm/u-boot.h>
 #include <asm/io.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/soc.h>

 #if defined(CONFIG_ARCH_MVEBU)
 /* Use common XOR definitions for A3x and AXP */
 #include "../../../drivers/ddr/marvell/axp/xor.h"
 #include "../../../drivers/ddr/marvell/axp/xor_regs.h"
 #endif

 DECLARE_GLOBAL_DATA_PTR;

 struct sdram_bank {
 	u32	win_bar;
 	u32	win_sz;
 };

 struct sdram_addr_dec {
 	struct sdram_bank sdram_bank[4];
 };

 #define REG_CPUCS_WIN_ENABLE		(1 << 0)
 #define REG_CPUCS_WIN_WR_PROTECT	(1 << 1)
 #define REG_CPUCS_WIN_WIN0_CS(x)	(((x) & 0x3) << 2)
 #define REG_CPUCS_WIN_SIZE(x)		(((x) & 0xff) << 24)

 #ifndef MVEBU_SDRAM_SIZE_MAX
 #define MVEBU_SDRAM_SIZE_MAX		0xc0000000
 #endif

 #define SCRUB_MAGIC		0xbeefdead

 #define SCRB_XOR_UNIT		0
 #define SCRB_XOR_CHAN		1
 #define SCRB_XOR_WIN		0

 #define XEBARX_BASE_OFFS	16

 /*
  * mvebu_sdram_bar - reads SDRAM Base Address Register
  */
 u32 mvebu_sdram_bar(enum memory_bank bank)
 {
 	struct sdram_addr_dec *base =
 		(struct sdram_addr_dec *)MVEBU_SDRAM_BASE;
 	u32 result = 0;
 	u32 enable = 0x01 & readl(&base->sdram_bank[bank].win_sz);

 	if ((!enable) || (bank > BANK3))
 		return 0;

 	result = readl(&base->sdram_bank[bank].win_bar);
 	return result;
 }

 /*
  * mvebu_sdram_bs_set - writes SDRAM Bank size
  */
 static void mvebu_sdram_bs_set(enum memory_bank bank, u32 size)
 {
 	struct sdram_addr_dec *base =
 		(struct sdram_addr_dec *)MVEBU_SDRAM_BASE;
 	/* Read current register value */
 	u32 reg = readl(&base->sdram_bank[bank].win_sz);

 	/* Clear window size */
 	reg &= ~REG_CPUCS_WIN_SIZE(0xFF);

 	/* Set new window size */
 	reg |= REG_CPUCS_WIN_SIZE((size - 1) >> 24);

 	writel(reg, &base->sdram_bank[bank].win_sz);
 }

 /*
  * mvebu_sdram_bs - reads SDRAM Bank size
  */
 u32 mvebu_sdram_bs(enum memory_bank bank)
 {
 	struct sdram_addr_dec *base =
 		(struct sdram_addr_dec *)MVEBU_SDRAM_BASE;
 	u32 result = 0;
 	u32 enable = 0x01 & readl(&base->sdram_bank[bank].win_sz);

 	if ((!enable) || (bank > BANK3))
 		return 0;
 	result = 0xff000000 & readl(&base->sdram_bank[bank].win_sz);
 	result += 0x01000000;
 	return result;
 }

 void mvebu_sdram_size_adjust(enum memory_bank bank)
 {
 	u32 size;

 	/* probe currently equipped RAM size */
 	size = get_ram_size((void *)mvebu_sdram_bar(bank),
 			    mvebu_sdram_bs(bank));

 	/* adjust SDRAM window size accordingly */
 	mvebu_sdram_bs_set(bank, size);
 }

 #if defined(CONFIG_ARCH_MVEBU)
 static u32 xor_ctrl_save;
 static u32 xor_base_save;
 static u32 xor_mask_save;

 static void mv_xor_init2(u32 cs)
 {
 	u32 reg, base, size, base2;
 	u32 bank_attr[4] = { 0xe00, 0xd00, 0xb00, 0x700 };

 	xor_ctrl_save = reg_read(XOR_WINDOW_CTRL_REG(SCRB_XOR_UNIT,
 						     SCRB_XOR_CHAN));
 	xor_base_save = reg_read(XOR_BASE_ADDR_REG(SCRB_XOR_UNIT,
 						   SCRB_XOR_WIN));
 	xor_mask_save = reg_read(XOR_SIZE_MASK_REG(SCRB_XOR_UNIT,
 						   SCRB_XOR_WIN));

 	/* Enable Window x for each CS */
 	reg = 0x1;
 	reg |= (0x3 << 16);
 	reg_write(XOR_WINDOW_CTRL_REG(SCRB_XOR_UNIT, SCRB_XOR_CHAN), reg);

 	base = 0;
 	size = mvebu_sdram_bs(cs) - 1;
 	if (size) {
 		base2 = ((base / (64 << 10)) << XEBARX_BASE_OFFS) |
 			bank_attr[cs];
 		reg_write(XOR_BASE_ADDR_REG(SCRB_XOR_UNIT, SCRB_XOR_WIN),
 			  base2);

 		base += size + 1;
 		size = (size / (64 << 10)) << 16;
 		/* Window x - size - 256 MB */
 		reg_write(XOR_SIZE_MASK_REG(SCRB_XOR_UNIT, SCRB_XOR_WIN), size);
 	}

 	mv_xor_hal_init(0);

 	return;
 }

 static void mv_xor_finish2(void)
 {
 	reg_write(XOR_WINDOW_CTRL_REG(SCRB_XOR_UNIT, SCRB_XOR_CHAN),
 		  xor_ctrl_save);
 	reg_write(XOR_BASE_ADDR_REG(SCRB_XOR_UNIT, SCRB_XOR_WIN),
 		  xor_base_save);
 	reg_write(XOR_SIZE_MASK_REG(SCRB_XOR_UNIT, SCRB_XOR_WIN),
 		  xor_mask_save);
 }

 static void dram_ecc_scrubbing(void)
 {
 	int cs;
 	u32 size, temp;
 	u32 total_mem = 0;
 	u64 total;
 	u32 start_addr;

 	/*
 	 * The DDR training code from the bin_hdr / SPL already
 	 * scrubbed the DDR till 0x1000000. And the main U-Boot
 	 * is loaded to an address < 0x1000000. So we need to
 	 * skip this range to not re-scrub this area again.
 	 */
 	temp = reg_read(REG_SDRAM_CONFIG_ADDR);
 	temp |= (1 << REG_SDRAM_CONFIG_IERR_OFFS);
 	reg_write(REG_SDRAM_CONFIG_ADDR, temp);

 	for (cs = 0; cs < CONFIG_NR_DRAM_BANKS; cs++) {
 		size = mvebu_sdram_bs(cs);
 		if (size == 0)
 			continue;

 		total = (u64)size;
 		total_mem += (u32)(total / (1 << 30));
 		start_addr = 0;
 		mv_xor_init2(cs);

 		/* Skip first 16 MiB */
 		if (0 == cs) {
 			start_addr = 0x1000000;
 			size -= start_addr;
 		}

 		mv_xor_mem_init(SCRB_XOR_CHAN, start_addr, size - 1,
 				SCRUB_MAGIC, SCRUB_MAGIC);

 		/* Wait for previous transfer completion */
 		while (mv_xor_state_get(SCRB_XOR_CHAN) != MV_IDLE)
 			;

 		mv_xor_finish2();
 	}

 	temp = reg_read(REG_SDRAM_CONFIG_ADDR);
 	temp &= ~(1 << REG_SDRAM_CONFIG_IERR_OFFS);
 	reg_write(REG_SDRAM_CONFIG_ADDR, temp);
 }

 static int ecc_enabled(void)
 {
 	if (reg_read(REG_SDRAM_CONFIG_ADDR) & (1 << REG_SDRAM_CONFIG_ECC_OFFS))
 		return 1;

 	return 0;
 }

 /* Return the width of the DRAM bus. */
 static int bus_width(void)
 {
 	int full_width = 0;

 	if (reg_read(REG_SDRAM_CONFIG_ADDR) & (1 << REG_SDRAM_CONFIG_WIDTH_OFFS))
 		full_width = 1;

 #ifdef CONFIG_ARMADA_XP
 	return full_width ? 64 : 32;
 #else
 	return full_width ? 32 : 16;
 #endif
 }

 static int cycle_mode(void)
 {
 	int val = reg_read(REG_DUNIT_CTRL_LOW_ADDR);

 	return (val >> REG_DUNIT_CTRL_LOW_2T_OFFS) & REG_DUNIT_CTRL_LOW_2T_MASK;
 }

 #else
 static void dram_ecc_scrubbing(void)
 {
 }

 static int ecc_enabled(void)
 {
 	return 0;
 }
 #endif

 int dram_init(void)
 {
 	u64 size = 0;
 	int i;

 	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
 		/*
 		 * It is assumed that all memory banks are consecutive
 		 * and without gaps.
 		 * If the gap is found, ram_size will be reported for
 		 * consecutive memory only
 		 */
 		if (mvebu_sdram_bar(i) != size)
 			break;

 		/*
 		 * Don't report more than 3GiB of SDRAM, otherwise there is no
 		 * address space left for the internal registers etc.
 		 */
 		size += mvebu_sdram_bs(i);
 		if (size > MVEBU_SDRAM_SIZE_MAX)
 			size = MVEBU_SDRAM_SIZE_MAX;
 	}

 	if (ecc_enabled())
 		dram_ecc_scrubbing();

 	gd->ram_size = size;

 	return 0;
 }

 /*
  * If this function is not defined here,
  * board.c alters dram bank zero configuration defined above.
  */
 int dram_init_banksize(void)
 {
 	u64 size = 0;
 	int i;

 	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
 		gd->bd->bi_dram[i].start = mvebu_sdram_bar(i);
 		gd->bd->bi_dram[i].size = mvebu_sdram_bs(i);

 		/* Clip the banksize to 1GiB if it exceeds the max size */
 		size += gd->bd->bi_dram[i].size;
 		if (size > MVEBU_SDRAM_SIZE_MAX)
 			mvebu_sdram_bs_set(i, 0x40000000);
 	}

 	return 0;
 }

 #if defined(CONFIG_ARCH_MVEBU)
 void board_add_ram_info(int use_default)
 {
 	struct sar_freq_modes sar_freq;
 	int mode;
 	int width;

 	get_sar_freq(&sar_freq);
 	printf(" (%d MHz, ", sar_freq.d_clk);

 	width = bus_width();
 	if (width)
 		printf("%d-bit, ", width);

 	mode = cycle_mode();
 	/* Mode 0 = Single cycle
 	 * Mode 1 = Two cycles   (2T)
 	 * Mode 2 = Three cycles (3T)
 	 */
 	if (mode == 1)
 		printf("2T, ");
 	if (mode == 2)
 		printf("3T, ");

 	if (ecc_enabled())
 		printf("ECC");
 	else
 		printf("ECC not");
 	printf(" enabled)");
 }
 #endif
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* (C) Copyright 2009
	* Marvell Semiconductor <www.marvell.com>
	* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
	*/

	#include <config.h>
	#include <init.h>
	#include <asm/global_data.h>
	#include <asm/u-boot.h>
	#include <asm/io.h>
	#include <asm/arch/cpu.h>
	#include <asm/arch/soc.h>

	#if defined(CONFIG_ARCH_MVEBU)
	/* Use common XOR definitions for A3x and AXP */
	#include "../../../drivers/ddr/marvell/axp/xor.h"
	#include "../../../drivers/ddr/marvell/axp/xor_regs.h"
	#endif

	DECLARE_GLOBAL_DATA_PTR;

	struct sdram_bank {
	u32 win_bar;
	u32 win_sz;
	};

	struct sdram_addr_dec {
	struct sdram_bank sdram_bank[4];
	};

	#define REG_CPUCS_WIN_ENABLE (1 << 0)
	#define REG_CPUCS_WIN_WR_PROTECT (1 << 1)
	#define REG_CPUCS_WIN_WIN0_CS(x) (((x) & 0x3) << 2)
	#define REG_CPUCS_WIN_SIZE(x) (((x) & 0xff) << 24)

	#ifndef MVEBU_SDRAM_SIZE_MAX
	#define MVEBU_SDRAM_SIZE_MAX 0xc0000000
	#endif

	#define SCRUB_MAGIC 0xbeefdead

	#define SCRB_XOR_UNIT 0
	#define SCRB_XOR_CHAN 1
	#define SCRB_XOR_WIN 0

	#define XEBARX_BASE_OFFS 16

	/*
	* mvebu_sdram_bar - reads SDRAM Base Address Register
	*/
	u32 mvebu_sdram_bar(enum memory_bank bank)
	{
	struct sdram_addr_dec *base =
	(struct sdram_addr_dec *)MVEBU_SDRAM_BASE;
	u32 result = 0;
	u32 enable = 0x01 & readl(&base->sdram_bank[bank].win_sz);

	if ((!enable) \|\| (bank > BANK3))
	return 0;

	result = readl(&base->sdram_bank[bank].win_bar);
	return result;
	}

	/*
	* mvebu_sdram_bs_set - writes SDRAM Bank size
	*/
	static void mvebu_sdram_bs_set(enum memory_bank bank, u32 size)
	{
	struct sdram_addr_dec *base =
	(struct sdram_addr_dec *)MVEBU_SDRAM_BASE;
	/* Read current register value */
	u32 reg = readl(&base->sdram_bank[bank].win_sz);

	/* Clear window size */
	reg &= ~REG_CPUCS_WIN_SIZE(0xFF);

	/* Set new window size */
	reg \|= REG_CPUCS_WIN_SIZE((size - 1) >> 24);

	writel(reg, &base->sdram_bank[bank].win_sz);
	}

	/*
	* mvebu_sdram_bs - reads SDRAM Bank size
	*/
	u32 mvebu_sdram_bs(enum memory_bank bank)
	{
	struct sdram_addr_dec *base =
	(struct sdram_addr_dec *)MVEBU_SDRAM_BASE;
	u32 result = 0;
	u32 enable = 0x01 & readl(&base->sdram_bank[bank].win_sz);

	if ((!enable) \|\| (bank > BANK3))
	return 0;
	result = 0xff000000 & readl(&base->sdram_bank[bank].win_sz);
	result += 0x01000000;
	return result;
	}

	void mvebu_sdram_size_adjust(enum memory_bank bank)
	{
	u32 size;

	/* probe currently equipped RAM size */
	size = get_ram_size((void *)mvebu_sdram_bar(bank),
	mvebu_sdram_bs(bank));

	/* adjust SDRAM window size accordingly */
	mvebu_sdram_bs_set(bank, size);
	}

	#if defined(CONFIG_ARCH_MVEBU)
	static u32 xor_ctrl_save;
	static u32 xor_base_save;
	static u32 xor_mask_save;

	static void mv_xor_init2(u32 cs)
	{
	u32 reg, base, size, base2;
	u32 bank_attr[4] = { 0xe00, 0xd00, 0xb00, 0x700 };

	xor_ctrl_save = reg_read(XOR_WINDOW_CTRL_REG(SCRB_XOR_UNIT,
	SCRB_XOR_CHAN));
	xor_base_save = reg_read(XOR_BASE_ADDR_REG(SCRB_XOR_UNIT,
	SCRB_XOR_WIN));
	xor_mask_save = reg_read(XOR_SIZE_MASK_REG(SCRB_XOR_UNIT,
	SCRB_XOR_WIN));

	/* Enable Window x for each CS */
	reg = 0x1;
	reg \|= (0x3 << 16);
	reg_write(XOR_WINDOW_CTRL_REG(SCRB_XOR_UNIT, SCRB_XOR_CHAN), reg);

	base = 0;
	size = mvebu_sdram_bs(cs) - 1;
	if (size) {
	base2 = ((base / (64 << 10)) << XEBARX_BASE_OFFS) \|
	bank_attr[cs];
	reg_write(XOR_BASE_ADDR_REG(SCRB_XOR_UNIT, SCRB_XOR_WIN),
	base2);

	base += size + 1;
	size = (size / (64 << 10)) << 16;
	/* Window x - size - 256 MB */
	reg_write(XOR_SIZE_MASK_REG(SCRB_XOR_UNIT, SCRB_XOR_WIN), size);
	}

	mv_xor_hal_init(0);

	return;
	}

	static void mv_xor_finish2(void)
	{
	reg_write(XOR_WINDOW_CTRL_REG(SCRB_XOR_UNIT, SCRB_XOR_CHAN),
	xor_ctrl_save);
	reg_write(XOR_BASE_ADDR_REG(SCRB_XOR_UNIT, SCRB_XOR_WIN),
	xor_base_save);
	reg_write(XOR_SIZE_MASK_REG(SCRB_XOR_UNIT, SCRB_XOR_WIN),
	xor_mask_save);
	}

	static void dram_ecc_scrubbing(void)
	{
	int cs;
	u32 size, temp;
	u32 total_mem = 0;
	u64 total;
	u32 start_addr;

	/*
	* The DDR training code from the bin_hdr / SPL already
	* scrubbed the DDR till 0x1000000. And the main U-Boot
	* is loaded to an address < 0x1000000. So we need to
	* skip this range to not re-scrub this area again.
	*/
	temp = reg_read(REG_SDRAM_CONFIG_ADDR);
	temp \|= (1 << REG_SDRAM_CONFIG_IERR_OFFS);
	reg_write(REG_SDRAM_CONFIG_ADDR, temp);

	for (cs = 0; cs < CONFIG_NR_DRAM_BANKS; cs++) {
	size = mvebu_sdram_bs(cs);
	if (size == 0)
	continue;

	total = (u64)size;
	total_mem += (u32)(total / (1 << 30));
	start_addr = 0;
	mv_xor_init2(cs);

	/* Skip first 16 MiB */
	if (0 == cs) {
	start_addr = 0x1000000;
	size -= start_addr;
	}

	mv_xor_mem_init(SCRB_XOR_CHAN, start_addr, size - 1,
	SCRUB_MAGIC, SCRUB_MAGIC);

	/* Wait for previous transfer completion */
	while (mv_xor_state_get(SCRB_XOR_CHAN) != MV_IDLE)
	;

	mv_xor_finish2();
	}

	temp = reg_read(REG_SDRAM_CONFIG_ADDR);
	temp &= ~(1 << REG_SDRAM_CONFIG_IERR_OFFS);
	reg_write(REG_SDRAM_CONFIG_ADDR, temp);
	}

	static int ecc_enabled(void)
	{
	if (reg_read(REG_SDRAM_CONFIG_ADDR) & (1 << REG_SDRAM_CONFIG_ECC_OFFS))
	return 1;

	return 0;
	}

	/* Return the width of the DRAM bus. */
	static int bus_width(void)
	{
	int full_width = 0;

	if (reg_read(REG_SDRAM_CONFIG_ADDR) & (1 << REG_SDRAM_CONFIG_WIDTH_OFFS))
	full_width = 1;

	#ifdef CONFIG_ARMADA_XP
	return full_width ? 64 : 32;
	#else
	return full_width ? 32 : 16;
	#endif
	}

	static int cycle_mode(void)
	{
	int val = reg_read(REG_DUNIT_CTRL_LOW_ADDR);

	return (val >> REG_DUNIT_CTRL_LOW_2T_OFFS) & REG_DUNIT_CTRL_LOW_2T_MASK;
	}

	#else
	static void dram_ecc_scrubbing(void)
	{
	}

	static int ecc_enabled(void)
	{
	return 0;
	}
	#endif

	int dram_init(void)
	{
	u64 size = 0;
	int i;

	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
	/*
	* It is assumed that all memory banks are consecutive
	* and without gaps.
	* If the gap is found, ram_size will be reported for
	* consecutive memory only
	*/
	if (mvebu_sdram_bar(i) != size)
	break;

	/*
	* Don't report more than 3GiB of SDRAM, otherwise there is no
	* address space left for the internal registers etc.
	*/
	size += mvebu_sdram_bs(i);
	if (size > MVEBU_SDRAM_SIZE_MAX)
	size = MVEBU_SDRAM_SIZE_MAX;
	}

	if (ecc_enabled())
	dram_ecc_scrubbing();

	gd->ram_size = size;

	return 0;
	}

	/*
	* If this function is not defined here,
	* board.c alters dram bank zero configuration defined above.
	*/
	int dram_init_banksize(void)
	{
	u64 size = 0;
	int i;

	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
	gd->bd->bi_dram[i].start = mvebu_sdram_bar(i);
	gd->bd->bi_dram[i].size = mvebu_sdram_bs(i);

	/* Clip the banksize to 1GiB if it exceeds the max size */
	size += gd->bd->bi_dram[i].size;
	if (size > MVEBU_SDRAM_SIZE_MAX)
	mvebu_sdram_bs_set(i, 0x40000000);
	}

	return 0;
	}

	#if defined(CONFIG_ARCH_MVEBU)
	void board_add_ram_info(int use_default)
	{
	struct sar_freq_modes sar_freq;
	int mode;
	int width;

	get_sar_freq(&sar_freq);
	printf(" (%d MHz, ", sar_freq.d_clk);

	width = bus_width();
	if (width)
	printf("%d-bit, ", width);

	mode = cycle_mode();
	/* Mode 0 = Single cycle
	* Mode 1 = Two cycles (2T)
	* Mode 2 = Three cycles (3T)
	*/
	if (mode == 1)
	printf("2T, ");
	if (mode == 2)
	printf("3T, ");

	if (ecc_enabled())
	printf("ECC");
	else
	printf("ECC not");
	printf(" enabled)");
	}
	#endif