| /* |
| * Copyright (C) 2016 Stefan Roese <sr@denx.de> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef _CONFIG_MVEBU_ARMADA_8K_H |
| #define _CONFIG_MVEBU_ARMADA_8K_H |
| |
| /* |
| * High Level Configuration Options (easy to change) |
| */ |
| #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ |
| |
| #define CONFIG_DISPLAY_BOARDINFO_LATE |
| |
| /* additions for new ARM relocation support */ |
| #define CONFIG_SYS_SDRAM_BASE 0x00000000 |
| |
| #define CONFIG_NR_DRAM_BANKS 1 |
| |
| /* auto boot */ |
| #define CONFIG_PREBOOT |
| |
| #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ |
| 115200, 230400, 460800, 921600 } |
| |
| /* |
| * For booting Linux, the board info and command line data |
| * have to be in the first 8 MB of memory, since this is |
| * the maximum mapped by the Linux kernel during initialization. |
| */ |
| #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ |
| #define CONFIG_INITRD_TAG /* enable INITRD tag */ |
| #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ |
| |
| #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ |
| |
| /* |
| * Size of malloc() pool |
| */ |
| #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MiB for malloc() */ |
| |
| /* |
| * Other required minimal configurations |
| */ |
| #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ |
| #define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ |
| #define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */ |
| #define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */ |
| #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ |
| #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ |
| |
| #define CONFIG_SYS_ALT_MEMTEST |
| |
| /* End of 16M scrubbed by training in bootrom */ |
| #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000) |
| |
| /* |
| * SPI Flash configuration |
| */ |
| #define CONFIG_ENV_SPI_BUS 0 |
| #define CONFIG_ENV_SPI_CS 0 |
| |
| /* SPI NOR flash default params, used by sf commands */ |
| #define CONFIG_SF_DEFAULT_SPEED 1000000 |
| #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 |
| #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE |
| |
| #define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */ |
| #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ |
| #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ |
| |
| #define CONFIG_SYS_MAX_NAND_DEVICE 1 |
| #define CONFIG_SYS_NAND_MAX_CHIPS 1 |
| #define CONFIG_SYS_NAND_ONFI_DETECTION |
| #define CONFIG_SYS_NAND_USE_FLASH_BBT |
| |
| /* |
| * Ethernet Driver configuration |
| */ |
| #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ |
| #define CONFIG_ARP_TIMEOUT 200 |
| #define CONFIG_NET_RETRY_COUNT 50 |
| |
| #define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3) |
| |
| /* USB ethernet */ |
| |
| /* |
| * SATA/SCSI/AHCI configuration |
| */ |
| #define CONFIG_SCSI_AHCI_PLAT |
| #define CONFIG_LBA48 |
| #define CONFIG_SYS_64BIT_LBA |
| |
| #define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 |
| #define CONFIG_SYS_SCSI_MAX_LUN 1 |
| #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ |
| CONFIG_SYS_SCSI_MAX_LUN) |
| |
| /* |
| * PCI configuration |
| */ |
| #ifdef CONFIG_PCIE_DW_MVEBU |
| #define CONFIG_E1000 |
| #endif |
| |
| #define BOOT_TARGET_DEVICES(func) \ |
| func(MMC, mmc, 1) \ |
| func(MMC, mmc, 0) \ |
| func(USB, usb, 0) \ |
| func(SCSI, scsi, 0) \ |
| func(PXE, pxe, na) \ |
| func(DHCP, dhcp, na) |
| |
| #include <config_distro_bootcmd.h> |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "scriptaddr=0x4d00000\0" \ |
| "pxefile_addr_r=0x4e00000\0" \ |
| "fdt_addr_r=0x4f00000\0" \ |
| "kernel_addr_r=0x5000000\0" \ |
| "ramdisk_addr_r=0x8000000\0" \ |
| "fdtfile=marvell/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ |
| BOOTENV |
| |
| #endif /* _CONFIG_MVEBU_ARMADA_8K_H */ |