| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * Copyright (c) 2023, Linaro Limited |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/firmware/qcom,scm.h> |
| #include <dt-bindings/leds/common.h> |
| #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> |
| #include <dt-bindings/regulator/qcom,rpmh-regulator.h> |
| #include <dt-bindings/sound/cs35l45.h> |
| #include "sm8550.dtsi" |
| #include "pm8010.dtsi" |
| #include "pm8550.dtsi" |
| #include "pm8550b.dtsi" |
| #define PMK8550VE_SID 5 |
| #include "pm8550ve.dtsi" |
| #include "pm8550vs.dtsi" |
| #include "pmk8550.dtsi" |
| /* TODO: Only one SID of PMR735D seems accessible? */ |
| |
| /delete-node/ &hwfence_shbuf; |
| /delete-node/ &mpss_mem; |
| /delete-node/ &rmtfs_mem; |
| / { |
| model = "Sony Xperia 1 V"; |
| compatible = "sony,pdx234", "qcom,sm8550"; |
| chassis-type = "handset"; |
| |
| aliases { |
| i2c0 = &i2c0; |
| i2c4 = &i2c4; |
| i2c10 = &i2c10; |
| i2c11 = &i2c11; |
| i2c16 = &i2c_hub_2; |
| serial0 = &uart7; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| label = "gpio-keys"; |
| |
| pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>; |
| pinctrl-names = "default"; |
| |
| key-camera-focus { |
| label = "Camera Focus"; |
| linux,code = <KEY_CAMERA_FOCUS>; |
| gpios = <&pm8550b_gpios 8 GPIO_ACTIVE_LOW>; |
| debounce-interval = <15>; |
| linux,can-disable; |
| wakeup-source; |
| }; |
| |
| key-camera-snapshot { |
| label = "Camera Snapshot"; |
| gpios = <&pm8550b_gpios 7 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_CAMERA>; |
| debounce-interval = <15>; |
| linux,can-disable; |
| wakeup-source; |
| }; |
| |
| key-volume-down { |
| label = "Volume Down"; |
| linux,code = <KEY_VOLUMEDOWN>; |
| gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; |
| debounce-interval = <15>; |
| linux,can-disable; |
| wakeup-source; |
| }; |
| }; |
| |
| pmic-glink { |
| compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; |
| orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| connector@0 { |
| compatible = "usb-c-connector"; |
| reg = <0>; |
| power-role = "dual"; |
| data-role = "dual"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| pmic_glink_hs_in: endpoint { |
| remote-endpoint = <&usb_1_dwc3_hs>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| pmic_glink_ss_in: endpoint { |
| remote-endpoint = <&usb_dp_qmpphy_out>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| reserved-memory { |
| mpss_mem: mpss-region@89800000 { |
| reg = <0x0 0x89800000 0x0 0x10800000>; |
| no-map; |
| }; |
| |
| splash@b8000000 { |
| reg = <0x0 0xb8000000 0x0 0x2b00000>; |
| no-map; |
| }; |
| |
| hwfence_shbuf: hwfence-shbuf-region@e6440000 { |
| reg = <0x0 0xe6440000 0x0 0x2dd000>; |
| no-map; |
| }; |
| |
| rmtfs_mem: memory@f8b00000 { |
| compatible = "qcom,rmtfs-mem"; |
| reg = <0x0 0xf8b00000 0x0 0x280000>; |
| no-map; |
| |
| qcom,client-id = <1>; |
| qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; |
| }; |
| |
| ramoops@ffd00000 { |
| compatible = "ramoops"; |
| reg = <0x0 0xffd00000 0x0 0xc0000>; |
| console-size = <0x40000>; |
| record-size = <0x1000>; |
| pmsg-size = <0x40000>; |
| ecc-size = <16>; |
| }; |
| |
| rdtag-store-region@ffdc0000 { |
| reg = <0x0 0xffdc0000 0x0 0x40000>; |
| no-map; |
| }; |
| }; |
| |
| vph_pwr: vph-pwr-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "vph_pwr"; |
| regulator-min-microvolt = <3700000>; |
| regulator-max-microvolt = <3700000>; |
| |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| }; |
| |
| &apps_rsc { |
| regulators-0 { |
| compatible = "qcom,pm8550-rpmh-regulators"; |
| qcom,pmic-id = "b"; |
| |
| pm8550_bob1: bob1 { |
| regulator-name = "pm8550_bob1"; |
| regulator-min-microvolt = <3416000>; |
| regulator-max-microvolt = <3960000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| /* TODO: bob2 @ 2.704-3.008V doesn't fall into the vreg driver constraints */ |
| |
| pm8550_l1: ldo1 { |
| regulator-name = "pm8550_l1"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8550_l2: ldo2 { |
| regulator-name = "pm8550_l2"; |
| regulator-min-microvolt = <3008000>; |
| regulator-max-microvolt = <3008000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| /* L4 exists in cmd-db, but the board seems to crash on access */ |
| |
| pm8550_l5: ldo5 { |
| regulator-name = "pm8550_l5"; |
| regulator-min-microvolt = <3104000>; |
| regulator-max-microvolt = <3104000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8550_l6: ldo6 { |
| regulator-name = "pm8550_l6"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3008000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8550_l7: ldo7 { |
| regulator-name = "pm8550_l7"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3008000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8550_l8: ldo8 { |
| regulator-name = "pm8550_l8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3008000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8550_l9: ldo9 { |
| regulator-name = "pm8550_l9"; |
| regulator-min-microvolt = <2960000>; |
| regulator-max-microvolt = <3008000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8550_l10: ldo10 { |
| regulator-name = "pm8550_l10"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8550_l11: ldo11 { |
| regulator-name = "pm8550_l11"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1504000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8550_l12: ldo12 { |
| regulator-name = "pm8550_l12"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8550_l13: ldo13 { |
| regulator-name = "pm8550_l13"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8550_l14: ldo14 { |
| regulator-name = "pm8550_l14"; |
| regulator-min-microvolt = <3304000>; |
| regulator-max-microvolt = <3304000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8550_l15: ldo15 { |
| regulator-name = "pm8550_l15"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8550_l16: ldo16 { |
| regulator-name = "pm8550_l16"; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8550_l17: ldo17 { |
| regulator-name = "pm8550_l17"; |
| regulator-min-microvolt = <2504000>; |
| regulator-max-microvolt = <2504000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| }; |
| |
| regulators-1 { |
| compatible = "qcom,pm8550vs-rpmh-regulators"; |
| qcom,pmic-id = "c"; |
| |
| pm8550vs_0_l1: ldo1 { |
| regulator-name = "pm8550vs_0_l1"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8550vs_0_l3: ldo3 { |
| regulator-name = "pm8550vs_0_l3"; |
| regulator-min-microvolt = <880000>; |
| regulator-max-microvolt = <912000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| }; |
| |
| regulators-2 { |
| compatible = "qcom,pm8550vs-rpmh-regulators"; |
| qcom,pmic-id = "d"; |
| |
| pm8550vs_1_l1: ldo1 { |
| regulator-name = "pm8550vs_1_l1"; |
| regulator-min-microvolt = <880000>; |
| regulator-max-microvolt = <920000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| /* L3 exists in cmd-db, but the board seems to crash on access */ |
| }; |
| |
| regulators-3 { |
| compatible = "qcom,pm8550vs-rpmh-regulators"; |
| qcom,pmic-id = "e"; |
| |
| pm8550vs_2_s4: smps4 { |
| regulator-name = "pm8550vs_2_s4"; |
| regulator-min-microvolt = <904000>; |
| regulator-max-microvolt = <984000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8550vs_2_s5: smps5 { |
| regulator-name = "pm8550vs_2_s5"; |
| regulator-min-microvolt = <1010000>; |
| regulator-max-microvolt = <1120000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8550vs_2_l1: ldo1 { |
| regulator-name = "pm8550vs_2_l1"; |
| regulator-min-microvolt = <880000>; |
| regulator-max-microvolt = <912000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8550vs_2_l2: ldo2 { |
| regulator-name = "pm8550vs_2_l2"; |
| regulator-min-microvolt = <880000>; |
| regulator-max-microvolt = <968000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8550vs_2_l3: ldo3 { |
| regulator-name = "pm8550vs_2_l3"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| }; |
| |
| regulators-4 { |
| compatible = "qcom,pm8550ve-rpmh-regulators"; |
| qcom,pmic-id = "f"; |
| |
| pm8550ve_s4: smps4 { |
| regulator-name = "pm8550ve_s4"; |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <700000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8550ve_l1: ldo1 { |
| regulator-name = "pm8550ve_l1"; |
| regulator-min-microvolt = <912000>; |
| regulator-max-microvolt = <912000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8550ve_l2: ldo2 { |
| regulator-name = "pm8550ve_l2"; |
| regulator-min-microvolt = <880000>; |
| regulator-max-microvolt = <912000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8550ve_l3: ldo3 { |
| regulator-name = "pm8550ve_l3"; |
| regulator-min-microvolt = <912000>; |
| regulator-max-microvolt = <912000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| }; |
| |
| regulators-5 { |
| compatible = "qcom,pm8550vs-rpmh-regulators"; |
| qcom,pmic-id = "g"; |
| |
| pm8550vs_3_s1: smps1 { |
| regulator-name = "pm8550vs_3_s1"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1300000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8550vs_3_s2: smps2 { |
| regulator-name = "pm8550vs_3_s2"; |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <1036000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8550vs_3_s3: smps3 { |
| regulator-name = "pm8550vs_3_s3"; |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1004000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8550vs_3_s4: smps4 { |
| regulator-name = "pm8550vs_3_s4"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1352000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8550vs_3_s5: smps5 { |
| regulator-name = "pm8550vs_3_s5"; |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <1004000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8550vs_3_s6: smps6 { |
| regulator-name = "pm8550vs_3_s6"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2000000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8550vs_3_l1: ldo1 { |
| regulator-name = "pm8550vs_3_l1"; |
| regulator-min-microvolt = <1144000>; |
| regulator-max-microvolt = <1256000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8550vs_3_l2: ldo2 { |
| regulator-name = "pm8550vs_3_l2"; |
| regulator-min-microvolt = <1104000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8550vs_3_l3: ldo3 { |
| regulator-name = "pm8550vs_3_l3"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| }; |
| |
| /* TODO: Unknown PMIC @ k, l, PM8010 @ m, n */ |
| }; |
| |
| &gpi_dma1 { |
| status = "okay"; |
| }; |
| |
| &gpi_dma2 { |
| status = "okay"; |
| }; |
| |
| &i2c_hub_2 { |
| clock-frequency = <400000>; |
| status = "okay"; |
| |
| pmic@75 { |
| compatible = "dlg,slg51000"; |
| reg = <0x75>; |
| dlg,cs-gpios = <&pm8550vs_g_gpios 4 GPIO_ACTIVE_HIGH>; |
| |
| pinctrl-0 = <&cam_pwr_a_cs>; |
| pinctrl-names = "default"; |
| |
| regulators { |
| slg51000_a_ldo1: ldo1 { |
| regulator-name = "slg51000_a_ldo1"; |
| regulator-min-microvolt = <2400000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| slg51000_a_ldo2: ldo2 { |
| regulator-name = "slg51000_a_ldo2"; |
| regulator-min-microvolt = <2400000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| slg51000_a_ldo3: ldo3 { |
| regulator-name = "slg51000_a_ldo3"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <3750000>; |
| }; |
| |
| slg51000_a_ldo4: ldo4 { |
| regulator-name = "slg51000_a_ldo4"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <3750000>; |
| }; |
| |
| slg51000_a_ldo5: ldo5 { |
| regulator-name = "slg51000_a_ldo5"; |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| |
| slg51000_a_ldo6: ldo6 { |
| regulator-name = "slg51000_a_ldo6"; |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| |
| slg51000_a_ldo7: ldo7 { |
| regulator-name = "slg51000_a_ldo7"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <3750000>; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c_master_hub_0 { |
| status = "okay"; |
| }; |
| |
| &i2c0 { |
| clock-frequency = <1000000>; |
| status = "okay"; |
| |
| /* NXP NFC @ 28 */ |
| }; |
| |
| &i2c4 { |
| clock-frequency = <400000>; |
| status = "okay"; |
| |
| /* LX Semi SW82907 touchscreen @ 28 */ |
| }; |
| |
| &i2c10 { |
| clock-frequency = <1000000>; |
| status = "okay"; |
| |
| /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */ |
| }; |
| |
| &i2c11 { |
| clock-frequency = <1000000>; |
| status = "okay"; |
| |
| cs35l41_l: speaker-amp@30 { |
| compatible = "cirrus,cs35l45"; |
| reg = <0x30>; |
| interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; |
| reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>; |
| cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED | CS35L45_ASP_TX_HIZ_DISABLED)>; |
| #sound-dai-cells = <1>; |
| |
| cirrus,gpio-ctrl2 { |
| gpio-ctrl = <0x2>; |
| }; |
| }; |
| |
| cs35l41_r: speaker-amp@31 { |
| compatible = "cirrus,cs35l45"; |
| reg = <0x31>; |
| interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; |
| reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>; |
| cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED | CS35L45_ASP_TX_HIZ_DISABLED)>; |
| #sound-dai-cells = <1>; |
| |
| cirrus,gpio-ctrl2 { |
| gpio-ctrl = <0x2>; |
| }; |
| }; |
| }; |
| |
| &pcie0 { |
| wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; |
| perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; |
| |
| pinctrl-0 = <&pcie0_default_state>; |
| pinctrl-names = "default"; |
| |
| status = "okay"; |
| }; |
| |
| &pcie0_phy { |
| vdda-phy-supply = <&pm8550vs_2_l1>; |
| vdda-pll-supply = <&pm8550vs_2_l3>; |
| |
| status = "okay"; |
| }; |
| |
| &pm8550_flash { |
| status = "okay"; |
| |
| led-0 { |
| function = LED_FUNCTION_FLASH; |
| color = <LED_COLOR_ID_WHITE>; |
| led-sources = <1>, <4>; |
| led-max-microamp = <500000>; |
| flash-max-microamp = <1000000>; |
| flash-max-timeout-us = <1280000>; |
| function-enumerator = <0>; |
| }; |
| |
| led-1 { |
| function = LED_FUNCTION_FLASH; |
| color = <LED_COLOR_ID_YELLOW>; |
| led-sources = <2>, <3>; |
| led-max-microamp = <500000>; |
| flash-max-microamp = <1000000>; |
| flash-max-timeout-us = <1280000>; |
| function-enumerator = <1>; |
| }; |
| }; |
| |
| &pm8550_gpios { |
| vol_down_n: volume-down-n-state { |
| pins = "gpio6"; |
| function = "normal"; |
| power-source = <1>; |
| bias-pull-up; |
| input-enable; |
| }; |
| |
| sdc2_card_det_n: sd-card-det-n-state { |
| pins = "gpio12"; |
| function = "normal"; |
| power-source = <1>; |
| bias-pull-down; |
| output-disable; |
| input-enable; |
| }; |
| }; |
| |
| &pm8550b_gpios { |
| snapshot_n: snapshot-n-state { |
| pins = "gpio7"; |
| function = "normal"; |
| power-source = <1>; |
| bias-pull-up; |
| input-enable; |
| }; |
| |
| focus_n: focus-n-state { |
| pins = "gpio8"; |
| function = "normal"; |
| power-source = <1>; |
| bias-pull-up; |
| input-enable; |
| }; |
| }; |
| |
| &pm8550vs_g_gpios { |
| cam_pwr_a_cs: cam-pwr-a-cs-state { |
| pins = "gpio4"; |
| function = "normal"; |
| power-source = <0x01>; |
| drive-push-pull; |
| output-low; |
| qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; |
| }; |
| }; |
| |
| &pm8550b_eusb2_repeater { |
| qcom,tune-usb2-disc-thres = /bits/ 8 <0x6>; |
| qcom,tune-usb2-amplitude = /bits/ 8 <0xf>; |
| qcom,tune-usb2-preem = /bits/ 8 <0x7>; |
| vdd18-supply = <&pm8550_l15>; |
| vdd3-supply = <&pm8550_l5>; |
| }; |
| |
| &pon_pwrkey { |
| status = "okay"; |
| }; |
| |
| &pon_resin { |
| linux,code = <KEY_VOLUMEUP>; |
| status = "okay"; |
| }; |
| |
| &qupv3_id_0 { |
| status = "okay"; |
| }; |
| |
| &qupv3_id_1 { |
| status = "okay"; |
| }; |
| |
| &remoteproc_adsp { |
| firmware-name = "qcom/sm8550/Sony/yodo/adsp.mbn", |
| "qcom/sm8550/Sony/yodo/adsp_dtb.mbn"; |
| status = "okay"; |
| }; |
| |
| &remoteproc_cdsp { |
| firmware-name = "qcom/sm8550/Sony/yodo/cdsp.mbn", |
| "qcom/sm8550/Sony/yodo/cdsp_dtb.mbn"; |
| status = "okay"; |
| }; |
| |
| &sdhc_2 { |
| cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_HIGH>; |
| pinctrl-0 = <&sdc2_default &sdc2_card_det_n>; |
| pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>; |
| pinctrl-names = "default", "sleep"; |
| vmmc-supply = <&pm8550_l9>; |
| vqmmc-supply = <&pm8550_l8>; |
| no-sdio; |
| no-mmc; |
| status = "okay"; |
| }; |
| |
| &sleep_clk { |
| clock-frequency = <32000>; |
| }; |
| |
| &tlmm { |
| gpio-reserved-ranges = <32 8>; |
| }; |
| |
| &uart7 { |
| status = "okay"; |
| }; |
| |
| &usb_1 { |
| status = "okay"; |
| }; |
| |
| &usb_1_dwc3 { |
| dr_mode = "otg"; |
| usb-role-switch; |
| }; |
| |
| &usb_1_dwc3_hs { |
| remote-endpoint = <&pmic_glink_hs_in>; |
| }; |
| |
| &usb_1_dwc3_ss { |
| remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; |
| }; |
| |
| &usb_1_hsphy { |
| vdd-supply = <&pm8550vs_2_l1>; |
| vdda12-supply = <&pm8550vs_2_l3>; |
| phys = <&pm8550b_eusb2_repeater>; |
| |
| status = "okay"; |
| }; |
| |
| &usb_dp_qmpphy { |
| vdda-phy-supply = <&pm8550vs_2_l3>; |
| vdda-pll-supply = <&pm8550ve_l3>; |
| orientation-switch; |
| |
| status = "okay"; |
| }; |
| |
| &usb_dp_qmpphy_out { |
| remote-endpoint = <&pmic_glink_ss_in>; |
| }; |
| |
| &usb_dp_qmpphy_usb_ss_in { |
| remote-endpoint = <&usb_1_dwc3_ss>; |
| }; |
| |
| &xo_board { |
| clock-frequency = <76800000>; |
| }; |