| if ARCH_IMX8M |
| |
| config IMX8M |
| bool |
| select BINMAN |
| select GICV3 if ARMV8_PSCI |
| select HAS_CAAM |
| select LTO |
| select ROM_UNIFIED_SECTIONS |
| select ARMV8_CRYPTO |
| |
| config IMX8MQ |
| bool |
| select IMX8M |
| select CLK_IMX8MQ |
| |
| config IMX8MM |
| bool |
| select IMX8M |
| |
| config IMX8MN |
| bool |
| select IMX8M |
| |
| config IMX8MP |
| bool |
| select IMX8M |
| |
| config SYS_SOC |
| default "imx8m" |
| |
| config SYS_HAS_ARMV8_SECURE_BASE |
| bool "Enable secure address for PSCI image" |
| depends on ARMV8_PSCI |
| help |
| PSCI image can be re-located to secure RAM. |
| If enabled, please also define the value for ARMV8_SECURE_BASE, |
| for i.MX8M, it could be some address in OCRAM. |
| |
| config IMX8M_OPTEE_LOAD_ADDR |
| hex "Load address of OPTEE image" |
| default 0xbe000000 if IMX8MM |
| default 0xbe000000 if IMX8MN |
| default 0x56000000 if IMX8MP |
| default 0xfe000000 if IMX8MQ |
| help |
| The load and entry address for the OPTEE image. This value defaults to |
| the one defined in tf-a if not provided in the board defconfig file. |
| |
| |
| choice |
| prompt "NXP i.MX8M board select" |
| optional |
| |
| config TARGET_IMX8MQ_CM |
| bool "Ronetix iMX8MQ-CM SoM" |
| select IMX8MQ |
| select IMX8M_LPDDR4 |
| |
| config TARGET_IMX8MQ_EVK |
| bool "imx8mq_evk" |
| select IMX8MQ |
| select IMX8M_LPDDR4 |
| select FSL_CAAM |
| select ARCH_MISC_INIT |
| select SPL_CRYPTO if SPL |
| imply OF_UPSTREAM |
| imply BOOTSTD_FULL |
| imply BOOTSTD_BOOTCOMMAND |
| |
| config TARGET_IMX8MQ_PHANBELL |
| bool "imx8mq_phanbell" |
| select IMX8MQ |
| select IMX8M_LPDDR4 |
| |
| config TARGET_IMX8MQ_REFORM2 |
| bool "imx8mq_reform2" |
| select IMX8MQ |
| select IMX8M_LPDDR4 |
| |
| config TARGET_IMX8MM_DATA_MODUL_EDM_SBC |
| bool "Data Modul eDM SBC i.MX8M Mini" |
| select IMX8MM |
| select IMX8M_LPDDR4 |
| select SUPPORT_SPL |
| |
| config TARGET_IMX8MM_EVK |
| bool "imx8mm LPDDR4 EVK board" |
| select IMX8MM |
| select SUPPORT_SPL |
| select IMX8M_LPDDR4 |
| select FSL_CAAM |
| select ARCH_MISC_INIT |
| select SPL_CRYPTO if SPL |
| imply OF_UPSTREAM |
| |
| config TARGET_IMX8MM_ICORE_MX8MM |
| bool "Engicam i.Core MX8M Mini SOM" |
| select IMX8MM |
| select SUPPORT_SPL |
| select IMX8M_LPDDR4 |
| help |
| i.Core MX8M Mini is an EDIMM SOM based on NXP i.MX8MM. |
| |
| i.Core MX8M Mini EDIMM2.2: |
| * EDIMM2.2 is a Form Factor Capacitive Evaluation Board. |
| * i.Core MX8M Mini needs to mount on top of EDIMM2.2 for |
| creating complete i.Core MX8M Mini EDIMM2.2 Starter Kit. |
| |
| i.Core MX8M Mini C.TOUCH 2.0 |
| * C.TOUCH 2.0 is a general purpose Carrier board. |
| * i.Core MX8M Mini needs to mount on top of this Carrier board |
| for creating complete i.Core MX8M Mini C.TOUCH 2.0 board. |
| |
| config TARGET_IMX8MM_MX8MENLO |
| bool "Support i.MX8M Mini MX8Menlo board based on Toradex Verdin SoM" |
| select IMX8MM |
| select SUPPORT_SPL |
| select IMX8M_LPDDR4 |
| |
| config TARGET_IMX8MM_PHG |
| bool "i.MX8MM PHG board" |
| select IMX8MM |
| select SUPPORT_SPL |
| select IMX8M_LPDDR4 |
| |
| config TARGET_IMX8MM_VENICE |
| bool "Support Gateworks Venice iMX8M Mini module" |
| select IMX8MM |
| select SUPPORT_SPL |
| select IMX8M_LPDDR4 |
| select GATEWORKS_SC |
| select MISC |
| select FSL_CAAM |
| select ARCH_MISC_INIT |
| select SPL_CRYPTO if SPL |
| imply OF_UPSTREAM |
| |
| config TARGET_KONTRON_MX8MM |
| bool "Kontron Electronics N80xx" |
| select IMX8MM |
| select SUPPORT_SPL |
| select IMX8M_LPDDR4 |
| select FSL_CAAM |
| select ARCH_MISC_INIT |
| select SPL_CRYPTO if SPL |
| |
| config TARGET_IMX8MN_BSH_SMM_S2 |
| bool "imx8mn-bsh-smm-s2" |
| select IMX8MN |
| select SUPPORT_SPL |
| select IMX8M_DDR3L |
| imply OF_UPSTREAM |
| |
| config TARGET_IMX8MN_BSH_SMM_S2PRO |
| bool "imx8mn-bsh-smm-s2pro" |
| select IMX8MN |
| select SUPPORT_SPL |
| select IMX8M_DDR3L |
| imply OF_UPSTREAM |
| |
| config TARGET_IMX8MN_EVK |
| bool "imx8mn LPDDR4 EVK board" |
| select IMX8MN |
| select SUPPORT_SPL |
| select IMX8M_LPDDR4 |
| select FSL_CAAM |
| select SPL_CRYPTO if SPL |
| imply OF_UPSTREAM |
| imply BOOTSTD_FULL |
| imply BOOTSTD_BOOTCOMMAND |
| |
| config TARGET_IMX8MN_DDR4_EVK |
| bool "imx8mn DDR4 EVK board" |
| select IMX8MN |
| select SUPPORT_SPL |
| select IMX8M_DDR4 |
| select FSL_CAAM |
| select SPL_CRYPTO if SPL |
| imply OF_UPSTREAM |
| imply BOOTSTD_FULL |
| imply BOOTSTD_BOOTCOMMAND |
| |
| config TARGET_IMX8MN_VENICE |
| bool "Support Gateworks Venice iMX8M Nano module" |
| select IMX8MN |
| select SUPPORT_SPL |
| select IMX8M_LPDDR4 |
| select GATEWORKS_SC |
| select MISC |
| select FSL_CAAM |
| select ARCH_MISC_INIT |
| select SPL_CRYPTO if SPL |
| imply OF_UPSTREAM |
| |
| config TARGET_IMX8MP_DATA_MODUL_EDM_SBC |
| bool "Data Modul eDM SBC i.MX8M Plus" |
| select IMX8MP |
| select IMX8M_LPDDR4 |
| select SUPPORT_SPL |
| |
| config TARGET_IMX8MP_BEACON |
| bool "imx8mm Beacon Embedded devkit" |
| select IMX8MP |
| select SUPPORT_SPL |
| select IMX8M_LPDDR4 |
| select FSL_CAAM |
| select ARCH_MISC_INIT |
| select SPL_CRYPTO if SPL |
| imply OF_UPSTREAM |
| |
| config TARGET_IMX8MP_DEBIX_MODEL_A |
| bool "Polyhex i.MX8M Plus Debix Model A SBC" |
| select IMX8MP |
| select IMX8M_LPDDR4 |
| select SUPPORT_SPL |
| imply OF_UPSTREAM |
| |
| config TARGET_IMX8MP_DH_DHCOM_PDK2 |
| bool "DH electronics DHCOM Premium Developer Kit (2) i.MX8M Plus" |
| select IMX8MP |
| select IMX8M_LPDDR4 |
| select SUPPORT_SPL |
| |
| config TARGET_IMX8MP_ICORE_MX8MP |
| bool "Engicam i.Core MX8M Plus SOM" |
| select IMX8MP |
| select IMX8M_LPDDR4 |
| select SUPPORT_SPL |
| help |
| i.Core MX8M Plus is an EDIMM SOM based on NXP i.MX8MP. |
| |
| i.Core MX8M Plus EDIMM2.2: |
| * EDIMM2.2 is a Form Factor Capacitive Evaluation Board. |
| * i.Core MX8M Plus needs to mount on top of EDIMM2.2 for |
| creating complete i.Core MX8M Plus EDIMM2.2 Starter Kit. |
| |
| config TARGET_IMX8MP_EVK |
| bool "imx8mp LPDDR4 EVK board" |
| select IMX8MP |
| select SUPPORT_SPL |
| select IMX8M_LPDDR4 |
| select FSL_CAAM |
| select ARCH_MISC_INIT |
| select SPL_CRYPTO if SPL |
| imply OF_UPSTREAM |
| imply BOOTSTD_FULL |
| imply BOOTSTD_BOOTCOMMAND |
| |
| config TARGET_IMX8MP_NAVQP |
| bool "Emcraft Systems i.MX8M Plus NavQ+ board" |
| select IMX8MP |
| select IMX8M_LPDDR4 |
| select SUPPORT_SPL |
| imply OF_UPSTREAM |
| |
| config TARGET_IMX8MP_VENICE |
| bool "Support Gateworks Venice iMX8M Plus module" |
| select IMX8MP |
| select SUPPORT_SPL |
| select IMX8M_LPDDR4 |
| select GATEWORKS_SC |
| select MISC |
| select FSL_CAAM |
| select ARCH_MISC_INIT |
| select SPL_CRYPTO if SPL |
| imply OF_UPSTREAM |
| |
| config TARGET_PICO_IMX8MQ |
| bool "Support Technexion Pico iMX8MQ" |
| select IMX8MQ |
| select IMX8M_LPDDR4 |
| |
| config TARGET_IMX8MN_VAR_SOM |
| bool "Variscite imx8mn_var_som" |
| select IMX8MN |
| select SUPPORT_SPL |
| select IMX8M_DDR4 |
| select MISC |
| select I2C_EEPROM |
| select DM_ETH_PHY |
| select NVMEM |
| |
| config TARGET_KONTRON_PITX_IMX8M |
| bool "Support Kontron pITX-imx8m" |
| select IMX8MQ |
| select IMX8M_LPDDR4 |
| |
| config TARGET_VERDIN_IMX8MM |
| bool "Support Toradex Verdin iMX8M Mini module" |
| select IMX8MM |
| select SUPPORT_SPL |
| select IMX8M_LPDDR4 |
| imply OF_UPSTREAM |
| |
| config TARGET_VERDIN_IMX8MP |
| bool "Support Toradex Verdin iMX8M Plus module" |
| select IMX8MP |
| select SUPPORT_SPL |
| select IMX8M_LPDDR4 |
| imply OF_UPSTREAM |
| |
| config TARGET_IMX8MM_BEACON |
| bool "imx8mm Beacon Embedded devkit" |
| select IMX8MM |
| select SUPPORT_SPL |
| select IMX8M_LPDDR4 |
| select FSL_CAAM |
| select ARCH_MISC_INIT |
| select SPL_CRYPTO if SPL |
| imply OF_UPSTREAM |
| |
| config TARGET_IMX8MN_BEACON |
| bool "imx8mn Beacon Embedded devkit" |
| select IMX8MN |
| select SUPPORT_SPL |
| select IMX8M_LPDDR4 |
| select FSL_CAAM |
| select ARCH_MISC_INIT |
| select SPL_CRYPTO if SPL |
| imply OF_UPSTREAM |
| |
| config TARGET_PHYCORE_IMX8MM |
| bool "PHYTEC PHYCORE i.MX8MM" |
| select IMX8MM |
| select SUPPORT_SPL |
| select IMX8M_LPDDR4 |
| imply OF_UPSTREAM |
| |
| config TARGET_PHYCORE_IMX8MP |
| bool "PHYTEC PHYCORE i.MX8MP" |
| select IMX8MP |
| select SUPPORT_SPL |
| select IMX8M_LPDDR4 |
| imply OF_UPSTREAM |
| |
| config TARGET_IMX8MM_CL_IOT_GATE |
| bool "CompuLab iot-gate-imx8" |
| select IMX8MM |
| select SUPPORT_SPL |
| select IMX8M_LPDDR4 |
| select SUPPORT_EXTENSION_SCAN |
| |
| config TARGET_IMX8MM_CL_IOT_GATE_OPTEE |
| bool "CompuLab iot-gate-imx8 with optee support" |
| select IMX8MM |
| select SUPPORT_SPL |
| select IMX8M_LPDDR4 |
| select SUPPORT_EXTENSION_SCAN |
| |
| config TARGET_IMX8MP_RSB3720A1_4G |
| bool "Support i.MX8MP RSB3720A1 4G" |
| select IMX8MP |
| select SUPPORT_SPL |
| select IMX8M_LPDDR4 |
| |
| config TARGET_IMX8MP_RSB3720A1_6G |
| bool "Support i.MX8MP RSB3720A1 6G" |
| select IMX8MP |
| select SUPPORT_SPL |
| select IMX8M_LPDDR4 |
| |
| config TARGET_MSC_SM2S_IMX8MP |
| bool "MSC SMARC2 i.MX8MPLUS" |
| select IMX8MP |
| select SUPPORT_SPL |
| select IMX8M_LPDDR4 |
| |
| config TARGET_LIBREM5 |
| bool "Purism Librem5 Phone" |
| select IMX8MQ |
| select SUPPORT_SPL |
| select IMX8M_LPDDR4 |
| |
| endchoice |
| |
| source "board/advantech/imx8mp_rsb3720a1/Kconfig" |
| source "board/beacon/imx8mm/Kconfig" |
| source "board/beacon/imx8mn/Kconfig" |
| source "board/beacon/imx8mp/Kconfig" |
| source "board/bsh/imx8mn_smm_s2/Kconfig" |
| source "board/cloos/imx8mm_phg/Kconfig" |
| source "board/compulab/imx8mm-cl-iot-gate/Kconfig" |
| source "board/data_modul/imx8mm_edm_sbc/Kconfig" |
| source "board/data_modul/imx8mp_edm_sbc/Kconfig" |
| source "board/dhelectronics/dh_imx8mp/Kconfig" |
| source "board/emcraft/imx8mp_navqp/Kconfig" |
| source "board/engicam/imx8mm/Kconfig" |
| source "board/engicam/imx8mp/Kconfig" |
| source "board/freescale/imx8mq_evk/Kconfig" |
| source "board/freescale/imx8mm_evk/Kconfig" |
| source "board/freescale/imx8mn_evk/Kconfig" |
| source "board/freescale/imx8mp_evk/Kconfig" |
| source "board/gateworks/venice/Kconfig" |
| source "board/google/imx8mq_phanbell/Kconfig" |
| source "board/kontron/pitx_imx8m/Kconfig" |
| source "board/kontron/sl-mx8mm/Kconfig" |
| source "board/menlo/mx8menlo/Kconfig" |
| source "board/msc/sm2s_imx8mp/Kconfig" |
| source "board/mntre/imx8mq_reform2/Kconfig" |
| source "board/phytec/phycore_imx8mm/Kconfig" |
| source "board/phytec/phycore_imx8mp/Kconfig" |
| source "board/polyhex/imx8mp_debix_model_a/Kconfig" |
| source "board/purism/librem5/Kconfig" |
| source "board/ronetix/imx8mq-cm/Kconfig" |
| source "board/technexion/pico-imx8mq/Kconfig" |
| source "board/variscite/imx8mn_var_som/Kconfig" |
| source "board/toradex/verdin-imx8mm/Kconfig" |
| source "board/toradex/verdin-imx8mp/Kconfig" |
| |
| endif |