| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2016 Nexell Co., Ltd. |
| * |
| * Author: junghyun, kim <jhkim@nexell.co.kr> |
| */ |
| |
| #include <config.h> |
| #include <errno.h> |
| #include <log.h> |
| #include <asm/arch/reset.h> |
| #include <asm/arch/nexell.h> |
| #include <asm/arch/display.h> |
| |
| #include "soc/s5pxx18_soc_disptop.h" |
| #include "soc/s5pxx18_soc_dpc.h" |
| #include "soc/s5pxx18_soc_mlc.h" |
| |
| #define MLC_LAYER_RGB_0 0 /* number of RGB layer 0 */ |
| #define MLC_LAYER_RGB_1 1 /* number of RGB layer 1 */ |
| #define MLC_LAYER_VIDEO 3 /* number of Video layer: 3 = VIDEO */ |
| |
| #define __io_address(a) (void *)(uintptr_t)(a) |
| |
| void dp_control_init(int module) |
| { |
| void *base; |
| |
| /* top */ |
| base = __io_address(nx_disp_top_get_physical_address()); |
| nx_disp_top_set_base_address(base); |
| |
| /* control */ |
| base = __io_address(nx_dpc_get_physical_address(module)); |
| nx_dpc_set_base_address(module, base); |
| |
| /* top controller */ |
| nx_rstcon_setrst(RESET_ID_DISP_TOP, RSTCON_ASSERT); |
| nx_rstcon_setrst(RESET_ID_DISP_TOP, RSTCON_NEGATE); |
| |
| /* display controller */ |
| nx_rstcon_setrst(RESET_ID_DISPLAY, RSTCON_ASSERT); |
| nx_rstcon_setrst(RESET_ID_DISPLAY, RSTCON_NEGATE); |
| |
| nx_dpc_set_clock_pclk_mode(module, nx_pclkmode_always); |
| } |
| |
| int dp_control_setup(int module, |
| struct dp_sync_info *sync, struct dp_ctrl_info *ctrl) |
| { |
| unsigned int out_format; |
| unsigned int delay_mask; |
| int rgb_pvd = 0, hsync_cp1 = 7, vsync_fram = 7, de_cp2 = 7; |
| int v_vso = 1, v_veo = 1, e_vso = 1, e_veo = 1; |
| |
| int interlace = 0; |
| int invert_field; |
| int swap_rb; |
| unsigned int yc_order; |
| int vck_select; |
| int vclk_invert; |
| int emb_sync; |
| |
| enum nx_dpc_dither r_dither, g_dither, b_dither; |
| int rgb_mode = 0; |
| |
| if (NULL == sync || NULL == ctrl) { |
| debug("error, dp.%d not set sync or pad clock info !!!\n", |
| module); |
| return -EINVAL; |
| } |
| |
| out_format = ctrl->out_format; |
| delay_mask = ctrl->delay_mask; |
| interlace = sync->interlace; |
| invert_field = ctrl->invert_field; |
| swap_rb = ctrl->swap_RB; |
| yc_order = ctrl->yc_order; |
| vck_select = ctrl->vck_select; |
| vclk_invert = ctrl->clk_inv_lv0 | ctrl->clk_inv_lv1; |
| emb_sync = (out_format == DPC_FORMAT_CCIR656 ? 1 : 0); |
| |
| /* set delay mask */ |
| if (delay_mask & DP_SYNC_DELAY_RGB_PVD) |
| rgb_pvd = ctrl->d_rgb_pvd; |
| if (delay_mask & DP_SYNC_DELAY_HSYNC_CP1) |
| hsync_cp1 = ctrl->d_hsync_cp1; |
| if (delay_mask & DP_SYNC_DELAY_VSYNC_FRAM) |
| vsync_fram = ctrl->d_vsync_fram; |
| if (delay_mask & DP_SYNC_DELAY_DE_CP) |
| de_cp2 = ctrl->d_de_cp2; |
| |
| if (ctrl->vs_start_offset != 0 || |
| ctrl->vs_end_offset != 0 || |
| ctrl->ev_start_offset != 0 || ctrl->ev_end_offset != 0) { |
| v_vso = ctrl->vs_start_offset; |
| v_veo = ctrl->vs_end_offset; |
| e_vso = ctrl->ev_start_offset; |
| e_veo = ctrl->ev_end_offset; |
| } |
| |
| if (nx_dpc_format_rgb555 == out_format || |
| nx_dpc_format_mrgb555a == out_format || |
| nx_dpc_format_mrgb555b == out_format) { |
| r_dither = nx_dpc_dither_5bit; |
| g_dither = nx_dpc_dither_5bit; |
| b_dither = nx_dpc_dither_5bit; |
| rgb_mode = 1; |
| } else if (nx_dpc_format_rgb565 == out_format || |
| nx_dpc_format_mrgb565 == out_format) { |
| r_dither = nx_dpc_dither_5bit; |
| b_dither = nx_dpc_dither_5bit; |
| g_dither = nx_dpc_dither_6bit, rgb_mode = 1; |
| } else if ((nx_dpc_format_rgb666 == out_format) || |
| (nx_dpc_format_mrgb666 == out_format)) { |
| r_dither = nx_dpc_dither_6bit; |
| g_dither = nx_dpc_dither_6bit; |
| b_dither = nx_dpc_dither_6bit; |
| rgb_mode = 1; |
| } else { |
| r_dither = nx_dpc_dither_bypass; |
| g_dither = nx_dpc_dither_bypass; |
| b_dither = nx_dpc_dither_bypass; |
| rgb_mode = 1; |
| } |
| |
| /* CLKGEN0/1 */ |
| nx_dpc_set_clock_source(module, 0, ctrl->clk_src_lv0 == 3 ? |
| 6 : ctrl->clk_src_lv0); |
| nx_dpc_set_clock_divisor(module, 0, ctrl->clk_div_lv0); |
| nx_dpc_set_clock_source(module, 1, ctrl->clk_src_lv1); |
| nx_dpc_set_clock_divisor(module, 1, ctrl->clk_div_lv1); |
| nx_dpc_set_clock_out_delay(module, 0, ctrl->clk_delay_lv0); |
| nx_dpc_set_clock_out_delay(module, 1, ctrl->clk_delay_lv1); |
| |
| /* LCD out */ |
| nx_dpc_set_mode(module, out_format, interlace, invert_field, |
| rgb_mode, swap_rb, yc_order, emb_sync, emb_sync, |
| vck_select, vclk_invert, 0); |
| nx_dpc_set_hsync(module, sync->h_active_len, sync->h_sync_width, |
| sync->h_front_porch, sync->h_back_porch, |
| sync->h_sync_invert); |
| nx_dpc_set_vsync(module, sync->v_active_len, sync->v_sync_width, |
| sync->v_front_porch, sync->v_back_porch, |
| sync->v_sync_invert, sync->v_active_len, |
| sync->v_sync_width, sync->v_front_porch, |
| sync->v_back_porch); |
| nx_dpc_set_vsync_offset(module, v_vso, v_veo, e_vso, e_veo); |
| nx_dpc_set_delay(module, rgb_pvd, hsync_cp1, vsync_fram, de_cp2); |
| nx_dpc_set_dither(module, r_dither, g_dither, b_dither); |
| |
| if (IS_ENABLED(CONFIG_MACH_S5P6818)) { |
| /* Set TFT_CLKCTRL (offset : 1030h) |
| * Field name : DPC0_CLKCTRL, DPC1_CLKCRL |
| * Default value : clk_inv_lv0/1 = 0 : PADCLK_InvCLK |
| * Invert case : clk_inv_lv0/1 = 1 : PADCLK_CLK |
| */ |
| if (module == 0 && ctrl->clk_inv_lv0) |
| nx_disp_top_set_padclock(padmux_primary_mlc, |
| padclk_clk); |
| if (module == 1 && ctrl->clk_inv_lv1) |
| nx_disp_top_set_padclock(padmux_secondary_mlc, |
| padclk_clk); |
| } |
| |
| debug("%s: dp.%d x:%4d, hf:%3d, hb:%3d, hs:%3d, hi=%d\n", |
| __func__, module, sync->h_active_len, sync->h_front_porch, |
| sync->h_back_porch, sync->h_sync_width, sync->h_sync_invert); |
| debug("%s: dp.%d y:%4d, vf:%3d, vb:%3d, vs:%3d, vi=%d\n", |
| __func__, module, sync->v_active_len, sync->v_front_porch, |
| sync->v_back_porch, sync->v_sync_width, sync->h_sync_invert); |
| debug("%s: dp.%d ck.0:%d:%d:%d, ck.1:%d:%d:%d\n", |
| __func__, module, |
| ctrl->clk_src_lv0, ctrl->clk_div_lv0, ctrl->clk_inv_lv0, |
| ctrl->clk_src_lv1, ctrl->clk_div_lv1, ctrl->clk_inv_lv1); |
| debug("%s: dp.%d vs:%d, ve:%d, es:%d, ee:%d\n", |
| __func__, module, v_vso, v_veo, e_vso, e_veo); |
| debug("%s: dp.%d delay RGB:%d, hs:%d, vs:%d, de:%d, fmt:0x%x\n", |
| __func__, module, rgb_pvd, hsync_cp1, vsync_fram, de_cp2, |
| out_format); |
| |
| return 0; |
| } |
| |
| void dp_control_enable(int module, int on) |
| { |
| debug("%s: dp.%d top %s\n", __func__, module, on ? "ON" : "OFF"); |
| |
| nx_dpc_set_dpc_enable(module, on); |
| nx_dpc_set_clock_divisor_enable(module, on); |
| } |
| |
| void dp_plane_init(int module) |
| { |
| void *base = __io_address(nx_mlc_get_physical_address(module)); |
| |
| nx_mlc_set_base_address(module, base); |
| nx_mlc_set_clock_pclk_mode(module, nx_pclkmode_always); |
| nx_mlc_set_clock_bclk_mode(module, nx_bclkmode_always); |
| } |
| |
| int dp_plane_screen_setup(int module, struct dp_plane_top *top) |
| { |
| int width = top->screen_width; |
| int height = top->screen_height; |
| int interlace = top->interlace; |
| int video_prior = top->video_prior; |
| unsigned int bg_color = top->back_color; |
| |
| /* MLC TOP layer */ |
| nx_mlc_set_screen_size(module, width, height); |
| nx_mlc_set_layer_priority(module, video_prior); |
| nx_mlc_set_background(module, bg_color); |
| nx_mlc_set_field_enable(module, interlace); |
| nx_mlc_set_rgblayer_gama_table_power_mode(module, 0, 0, 0); |
| nx_mlc_set_rgblayer_gama_table_sleep_mode(module, 1, 1, 1); |
| nx_mlc_set_rgblayer_gamma_enable(module, 0); |
| nx_mlc_set_dither_enable_when_using_gamma(module, 0); |
| nx_mlc_set_gamma_priority(module, 0); |
| nx_mlc_set_top_power_mode(module, 1); |
| nx_mlc_set_top_sleep_mode(module, 0); |
| |
| debug("%s: dp.%d screen %dx%d, %s, priority:%d, bg:0x%x\n", |
| __func__, module, width, height, |
| interlace ? "Interlace" : "Progressive", |
| video_prior, bg_color); |
| |
| return 0; |
| } |
| |
| void dp_plane_screen_enable(int module, int on) |
| { |
| /* enable top screen */ |
| nx_mlc_set_mlc_enable(module, on); |
| nx_mlc_set_top_dirty_flag(module); |
| debug("%s: dp.%d top %s\n", __func__, module, on ? "ON" : "OFF"); |
| } |
| |
| int dp_plane_layer_setup(int module, struct dp_plane_info *plane) |
| { |
| int sx = plane->left; |
| int sy = plane->top; |
| int ex = sx + plane->width - 1; |
| int ey = sy + plane->height - 1; |
| int pixel_byte = plane->pixel_byte; |
| int mem_lock_size = 16; /* fix mem lock size */ |
| int layer = plane->layer; |
| unsigned int format = plane->format; |
| |
| if (!plane->enable) |
| return -EINVAL; |
| |
| /* MLC layer */ |
| nx_mlc_set_lock_size(module, layer, mem_lock_size); |
| nx_mlc_set_alpha_blending(module, layer, 0, 15); |
| nx_mlc_set_transparency(module, layer, 0, 0); |
| nx_mlc_set_color_inversion(module, layer, 0, 0); |
| nx_mlc_set_rgblayer_invalid_position(module, layer, 0, 0, 0, 0, 0, 0); |
| nx_mlc_set_rgblayer_invalid_position(module, layer, 1, 0, 0, 0, 0, 0); |
| nx_mlc_set_format_rgb(module, layer, format); |
| nx_mlc_set_position(module, layer, sx, sy, ex, ey); |
| nx_mlc_set_rgblayer_stride(module, layer, pixel_byte, |
| plane->width * pixel_byte); |
| nx_mlc_set_rgblayer_address(module, layer, plane->fb_base); |
| |
| debug("%s: dp.%d.%d %d * %d, %dbpp, fmt:0x%x\n", |
| __func__, module, layer, plane->width, plane->height, |
| pixel_byte * 8, format); |
| debug("%s: b:0x%x, l:%d, t:%d, r:%d, b:%d, hs:%d, vs:%d\n", |
| __func__, plane->fb_base, sx, sy, ex, ey, |
| plane->width * pixel_byte, pixel_byte); |
| |
| return 0; |
| } |
| |
| int dp_plane_set_enable(int module, int layer, int on) |
| { |
| int hl, hc; |
| int vl, vc; |
| |
| debug("%s: dp.%d.%d %s:%s\n", |
| __func__, module, layer, |
| layer == MLC_LAYER_VIDEO ? "Video" : "RGB", |
| on ? "ON" : "OFF"); |
| |
| if (layer != MLC_LAYER_VIDEO) { |
| nx_mlc_set_layer_enable(module, layer, on); |
| nx_mlc_set_dirty_flag(module, layer); |
| return 0; |
| } |
| |
| /* video layer */ |
| if (on) { |
| nx_mlc_set_video_layer_line_buffer_power_mode(module, 1); |
| nx_mlc_set_video_layer_line_buffer_sleep_mode(module, 0); |
| nx_mlc_set_layer_enable(module, layer, 1); |
| nx_mlc_set_dirty_flag(module, layer); |
| } else { |
| nx_mlc_set_layer_enable(module, layer, 0); |
| nx_mlc_set_dirty_flag(module, layer); |
| nx_mlc_get_video_layer_scale_filter(module, |
| &hl, &hc, &vl, &vc); |
| if (hl || hc || vl || vc) |
| nx_mlc_set_video_layer_scale_filter(module, 0, 0, 0, 0); |
| nx_mlc_set_video_layer_line_buffer_power_mode(module, 0); |
| nx_mlc_set_video_layer_line_buffer_sleep_mode(module, 1); |
| nx_mlc_set_dirty_flag(module, layer); |
| } |
| |
| return 0; |
| } |
| |
| void dp_plane_layer_enable(int module, |
| struct dp_plane_info *plane, int on) |
| { |
| dp_plane_set_enable(module, plane->layer, on); |
| } |
| |
| int dp_plane_set_address(int module, int layer, unsigned int address) |
| { |
| nx_mlc_set_rgblayer_address(module, layer, address); |
| nx_mlc_set_dirty_flag(module, layer); |
| |
| return 0; |
| } |
| |
| int dp_plane_wait_vsync(int module, int layer, int fps) |
| { |
| int cnt = 0; |
| |
| if (fps == 0) |
| return (int)nx_mlc_get_dirty_flag(module, layer); |
| |
| while (fps > cnt++) { |
| while (nx_mlc_get_dirty_flag(module, layer)) |
| ; |
| nx_mlc_set_dirty_flag(module, layer); |
| } |
| return 0; |
| } |