| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2018 Flowbird |
| * Martin Fuzzey <martin.fuzzey@flowbird.group> |
| */ |
| |
| #include <fdtdec.h> |
| #include <errno.h> |
| #include <dm.h> |
| #include <i2c.h> |
| #include <log.h> |
| #include <linux/printk.h> |
| #include <power/pmic.h> |
| #include <power/regulator.h> |
| #include <power/da9063_pmic.h> |
| |
| static const struct pmic_child_info pmic_children_info[] = { |
| { .prefix = "ldo", .driver = DA9063_LDO_DRIVER }, |
| { .prefix = "b", .driver = DA9063_BUCK_DRIVER }, |
| { }, |
| }; |
| |
| /* |
| * The register map is non contiguous and attempts to read in the holes fail. |
| * But "pmic dump" tries to dump the full register map. |
| * So define the holes here so we can fix that. |
| */ |
| struct da9063_reg_hole { |
| u16 first; |
| u16 last; |
| }; |
| |
| static const struct da9063_reg_hole da9063_reg_holes[] = { |
| DA9063_REG_HOLE_1, |
| DA9063_REG_HOLE_2, |
| DA9063_REG_HOLE_3, |
| /* These aren't readable. I can't see why from the datasheet but |
| * attempts to read fail and the kernel marks them unreadable too, |
| */ |
| {DA9063_REG_OTP_COUNT, DA9063_REG_OTP_DATA}, |
| }; |
| |
| static int da9063_reg_count(struct udevice *dev) |
| { |
| return DA9063_NUM_OF_REGS; |
| } |
| |
| static bool da9063_reg_valid(uint reg) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(da9063_reg_holes); i++) { |
| const struct da9063_reg_hole *hole = &da9063_reg_holes[i]; |
| |
| if (reg >= hole->first && reg <= hole->last) |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static int da9063_write(struct udevice *dev, uint reg, const uint8_t *buff, |
| int len) |
| { |
| if (dm_i2c_write(dev, reg, buff, len)) { |
| pr_err("write error to device: %p register: %#x!", dev, reg); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int da9063_read(struct udevice *dev, uint reg, uint8_t *buff, int len) |
| { |
| if (!da9063_reg_valid(reg)) |
| return -ENODATA; |
| |
| if (dm_i2c_read(dev, reg, buff, len)) { |
| pr_err("read error from device: %p register: %#x!", dev, reg); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int da9063_bind(struct udevice *dev) |
| { |
| ofnode regulators_node; |
| int children; |
| |
| regulators_node = dev_read_subnode(dev, "regulators"); |
| if (!ofnode_valid(regulators_node)) { |
| debug("%s: %s regulators subnode not found!", __func__, |
| dev->name); |
| return -ENXIO; |
| } |
| |
| debug("%s: '%s' - found regulators subnode\n", __func__, dev->name); |
| |
| children = pmic_bind_children(dev, regulators_node, pmic_children_info); |
| if (!children) |
| debug("%s: %s - no child found\n", __func__, dev->name); |
| |
| /* Always return success for this device */ |
| return 0; |
| } |
| |
| static int da9063_probe(struct udevice *dev) |
| { |
| return i2c_set_chip_addr_offset_mask(dev, 0x1); |
| } |
| |
| static struct dm_pmic_ops da9063_ops = { |
| .reg_count = da9063_reg_count, |
| .read = da9063_read, |
| .write = da9063_write, |
| }; |
| |
| static const struct udevice_id da9063_ids[] = { |
| { .compatible = "dlg,da9063" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(pmic_da9063) = { |
| .name = "da9063_pmic", |
| .id = UCLASS_PMIC, |
| .of_match = da9063_ids, |
| .bind = da9063_bind, |
| .probe = da9063_probe, |
| .ops = &da9063_ops, |
| }; |