| /* |
| * Copyright (C) 2003 Motorola,Inc. |
| * Xianghua Xiao<X.Xiao@motorola.com> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| /* U-Boot Startup Code for Motorola 85xx PowerPC based Embedded Boards |
| * |
| * The processor starts at 0xfffffffc and the code is first executed in the |
| * last 4K page(0xfffff000-0xffffffff) in flash/rom. |
| * |
| */ |
| |
| #include <config.h> |
| #include <mpc85xx.h> |
| #include <version.h> |
| |
| #define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ |
| |
| #include <ppc_asm.tmpl> |
| #include <ppc_defs.h> |
| |
| #include <asm/cache.h> |
| #include <asm/mmu.h> |
| |
| #ifndef CONFIG_IDENT_STRING |
| #define CONFIG_IDENT_STRING "" |
| #endif |
| |
| #undef MSR_KERNEL |
| #define MSR_KERNEL ( MSR_ME ) /* Machine Check */ |
| |
| /* |
| * Set up GOT: Global Offset Table |
| * |
| * Use r14 to access the GOT |
| */ |
| START_GOT |
| GOT_ENTRY(_GOT2_TABLE_) |
| GOT_ENTRY(_FIXUP_TABLE_) |
| |
| GOT_ENTRY(_start) |
| GOT_ENTRY(_start_of_vectors) |
| GOT_ENTRY(_end_of_vectors) |
| GOT_ENTRY(transfer_to_handler) |
| |
| GOT_ENTRY(__init_end) |
| GOT_ENTRY(_end) |
| GOT_ENTRY(__bss_start) |
| END_GOT |
| |
| /* |
| * e500 Startup -- after reset only the last 4KB of the effective |
| * address space is mapped in the MMU L2 TLB1 Entry0. The .bootpg |
| * section is located at THIS LAST page and basically does three |
| * things: clear some registers, set up exception tables and |
| * add more TLB entries for 'larger spaces'(e.g. the boot rom) to |
| * continue the boot procedure. |
| |
| * Once the boot rom is mapped by TLB entries we can proceed |
| * with normal startup. |
| * |
| */ |
| |
| .section .bootpg,"ax" |
| .globl _start_e500 |
| |
| _start_e500: |
| #if defined(CONFIG_MPC85xx_REV1) |
| li r0,0x2000 |
| mtspr 977,r0 |
| #endif |
| |
| /* Clear and set up some registers. Note: Some registers need strict |
| * synchronization by sync/mbar/msync/isync when being "mtspr". |
| * BookE: isync before PID,tlbivax,tlbwe |
| * BookE: isync after MSR,PID; msync_isync after tlbivax & tlbwe |
| * E500: msync,isync before L1CSR0 |
| * E500: isync after BBEAR,BBTAR,BUCSR,DBCR0,DBCR1,HID0,HID1,L1CSR0 |
| * L1CSR1, MAS[0,1,2,3,4,6],MMUCSR0, PID[0,1,2],SPEFCSR |
| */ |
| |
| /* invalidate d-cache */ |
| mfspr r0,L1CSR0 |
| ori r0,r0,0x0002 |
| msync |
| isync |
| mtspr L1CSR0,r0 |
| isync |
| |
| /* disable d-cache */ |
| li r0,0x0 |
| mtspr L1CSR0,r0 |
| isync |
| |
| /* invalidate i-cache */ |
| mfspr r0,L1CSR1 |
| ori r0,r0,0x0002 |
| mtspr L1CSR1,r0 |
| isync |
| |
| /* disable i-cache */ |
| li r0,0x0 |
| mtspr L1CSR1,r0 |
| isync |
| |
| /* clear registers */ |
| sync |
| li r0,0 |
| mtspr SRR0,r0 |
| mtspr SRR1,r0 |
| mtspr CSRR0,r0 |
| mtspr CSRR1,r0 |
| mtspr MCSRR0,r0 |
| mtspr MCSRR1,r0 |
| |
| mtspr ESR,r0 |
| mtspr MCSR,r0 |
| mtspr DEAR,r0 |
| |
| mtspr DBCR0,r0 |
| isync |
| mtspr DBCR1,r0 |
| isync |
| mtspr DBCR2,r0 |
| isync |
| mtspr IAC1,r0 |
| mtspr IAC2,r0 |
| mtspr DAC1,r0 |
| mtspr DAC2,r0 |
| |
| mfspr r1,DBSR |
| mtspr DBSR,r1 /* Clear all valid bits */ |
| |
| isync |
| mtspr PID0,r0 |
| isync |
| mtspr PID1,r0 |
| isync |
| mtspr PID2,r0 |
| isync |
| |
| mtspr TCR,r0 |
| |
| mtspr BUCSR,r0 /* disable branch prediction */ |
| isync |
| |
| mtspr HID0,r0 |
| isync |
| mtspr HID1,r0 |
| isync |
| |
| mtspr MAS4,r0 |
| isync |
| mtspr MAS6,r0 |
| isync |
| |
| /* Setup interrupt vectors */ |
| mtspr IVPR, r0 |
| |
| li r1,0x0100 |
| mtspr IVOR0,r1 /* 0: Critical input */ |
| li r1,0x0200 |
| mtspr IVOR1,r1 /* 1: Machine check */ |
| li r1,0x0300 |
| mtspr IVOR2,r1 /* 2: Data storage */ |
| li r1,0x0400 |
| mtspr IVOR3,r1 /* 3: Instruction storage */ |
| li r1,0x0500 |
| mtspr IVOR4,r1 /* 4: External interrupt */ |
| li r1,0x0600 |
| mtspr IVOR5,r1 /* 5: Alignment */ |
| li r1,0x0700 |
| mtspr IVOR6,r1 /* 6: Program check */ |
| li r1,0x0800 |
| mtspr IVOR7,r1 /* 7: floating point unavailable */ |
| li r1,0x0c00 |
| mtspr IVOR8,r1 /* 8: System call */ |
| /* 9: Auxiliary processor unavailable(unsupported) */ |
| li r1,0x1000 |
| mtspr IVOR10,r1 /* 10: Decrementer */ |
| li r1,0x1400 |
| mtspr IVOR13,r1 /* 13: Data TLB error */ |
| li r1,0x1300 |
| mtspr IVOR14,r1 /* 14: Instruction TLB error */ |
| li r1,0x2000 |
| mtspr IVOR15,r1 /* 15: Debug */ |
| |
| /* invalidate MMU L1/L2 */ |
| /* Note: before invalidate MMU L1/L2, we read TLB1 Entry 0 and then |
| * write it back immediately to fixup a bug(Errata CPU4) for this initial |
| * TLB1 entry 0,otherwise the TLB1 entry 0 will be invalidated. |
| */ |
| #if defined(CONFIG_MPC85xx_REV1) |
| lis r2,0x1000 |
| mtspr MAS0,r2 |
| tlbre |
| tlbwe |
| isync |
| li r2, 0x001e |
| mtspr MMUCSR0, r2 |
| isync |
| #endif |
| |
| /* After reset, CCSRBAR is located at CFG_CCSRBAR_DEFAULT, i.e. |
| * 0xff700000-0xff800000. We need add a TLB1 entry for this 1MB |
| * region before we can access any CCSR registers such as L2 |
| * registers, Local Access Registers,etc. We will also re-allocate |
| * CFG_CCSRBAR_DEFAULT to CFG_CCSRBAR immediately after TLB1 setup. |
| * |
| * Please refer to board-specif directory for TLB1 entry configuration. |
| * (e.g. board/<yourboard>/init.S) |
| * |
| */ |
| bl tlb1_entry |
| mr r5,r0 |
| li r1,0x000f /* max 16 TLB1 entries */ |
| mtctr r1 |
| lwzu r4,0(r5) /* how many TLB1 entries we actually use */ |
| |
| 0: cmpwi r4,0 |
| beq 1f |
| lwzu r0,4(r5) |
| lwzu r1,4(r5) |
| lwzu r2,4(r5) |
| lwzu r3,4(r5) |
| mtspr MAS0,r0 |
| mtspr MAS1,r1 |
| mtspr MAS2,r2 |
| mtspr MAS3,r3 |
| isync |
| msync |
| tlbwe |
| isync |
| addi r4,r4,-1 |
| bdnz 0b |
| |
| 1: |
| #if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR) |
| /* Special sequence needed to update CCSRBAR itself */ |
| lis r4, CFG_CCSRBAR_DEFAULT@h |
| ori r4, r4, CFG_CCSRBAR_DEFAULT@l |
| |
| lis r5, CFG_CCSRBAR@h |
| ori r5, r5, CFG_CCSRBAR@l |
| srwi r6,r5,12 |
| stw r6, 0(r4) |
| isync |
| |
| lis r5, 0xffff |
| ori r5,r5,0xf000 |
| lwz r5, 0(r5) |
| isync |
| |
| lis r3, CFG_CCSRBAR@h |
| lwz r5, CFG_CCSRBAR@l(r3) |
| isync |
| #endif |
| |
| /* invalidate all TLB0 entries */ |
| li r3,4 |
| li r4,0 |
| tlbivax r4,r3 |
| #if defined(CONFIG_MPC85xx_REV1) /* Errata CPU6 */ |
| nop |
| #endif |
| |
| /* set up local access windows, defined at board/<boardname>/init.S */ |
| lis r7,CFG_CCSRBAR@h |
| ori r7,r7,CFG_CCSRBAR@l |
| |
| bl law_entry |
| mr r6,r0 |
| #if defined(CONFIG_RAM_AS_FLASH) |
| li r1,0x0006 |
| #else |
| li r1,0x0007 /*we have 8 LAWs, but reseve one for boot-over-rio-or-pci */ |
| #endif |
| mtctr r1 |
| lwzu r5,0(r6) /* how many windows we actually use */ |
| |
| #if defined(CONFIG_RAM_AS_FLASH) |
| li r2,0x0c48 |
| li r1,0x0c50 |
| #else |
| li r2,0x0c28 /* the first pair is reserved for boot-over-rio-or-pci */ |
| li r1,0x0c30 |
| #endif |
| |
| 0: cmpwi r5,0 |
| beq 1f |
| lwzu r4,4(r6) |
| lwzu r3,4(r6) |
| stwx r4,r7,r2 |
| stwx r3,r7,r1 |
| addi r5,r5,-1 |
| addi r2,r2,0x0020 |
| addi r1,r1,0x0020 |
| bdnz 0b |
| |
| /* Jump out the last 4K page and continue to 'normal' start */ |
| 1: bl 3f |
| b _start |
| |
| 3: li r0,0 |
| mtspr SRR1,r0 /* Keep things disabled for now */ |
| mflr r1 |
| mtspr SRR0,r1 |
| rfi |
| |
| /* |
| * r3 - 1st arg to board_init(): IMMP pointer |
| * r4 - 2nd arg to board_init(): boot flag |
| */ |
| .text |
| .long 0x27051956 /* U-BOOT Magic Number */ |
| .globl version_string |
| version_string: |
| .ascii U_BOOT_VERSION |
| .ascii " (", __DATE__, " - ", __TIME__, ")" |
| .ascii CONFIG_IDENT_STRING, "\0" |
| |
| . = EXC_OFF_SYS_RESET |
| .globl _start |
| _start: |
| /* Clear and set up some registers. */ |
| li r0,0x0000 |
| lis r1,0xffff |
| mtspr DEC,r0 /* prevent dec exceptions */ |
| mttbl r0 /* prevent fit & wdt exceptions */ |
| mttbu r0 |
| mtspr TSR,r1 /* clear all timer exception status */ |
| mtspr TCR,r0 /* disable all */ |
| mtspr ESR,r0 /* clear exception syndrome register */ |
| mtspr MCSR,r0 /* machine check syndrome register */ |
| mtxer r0 /* clear integer exception register */ |
| lis r1,0x0002 /* set CE bit (Critical Exceptions) */ |
| ori r1,r1,0x1200 /* set ME/DE bit */ |
| mtmsr r1 /* change MSR */ |
| isync |
| |
| /* Enable Time Base and Select Time Base Clock */ |
| li r0,0x4000 /* time base is processor clock */ |
| mtspr HID0,r0 |
| isync |
| |
| #if defined(CONFIG_ADDR_STREAMING) |
| li r0,0x2000 |
| mtspr HID1,r0 |
| isync |
| #endif |
| |
| /* Enable Branch Prediction */ |
| #if defined(CONFIG_BTB) |
| li r0,0x201 /* BBFI = 1, BPEN = 1 */ |
| mtspr BUCSR,r0 |
| isync |
| #endif |
| |
| #if defined(CFG_INIT_DBCR) |
| lis r1,0xffff |
| ori r1,r1,0xffff |
| mtspr dbsr,r1 /* Clear all status bits */ |
| lis r0,CFG_INIT_DBCR@h /* DBCR0[IDM] must be set */ |
| ori r0,r0,CFG_INIT_DBCR@l |
| mtspr dbcr0,r0 |
| isync |
| #endif |
| |
| /* L1 DCache is used for initial RAM */ |
| mfspr r2, L1CSR0 |
| ori r2, r2, 0x0003 |
| oris r2, r2, 0x0001 |
| msync |
| isync |
| mtspr L1CSR0, r2 /* enable/invalidate L1 Dcache */ |
| isync |
| |
| /* Allocate Initial RAM in data cache. |
| */ |
| lis r3, CFG_INIT_RAM_ADDR@h |
| ori r3, r3, CFG_INIT_RAM_ADDR@l |
| li r2, 512 /* 512*32=16K */ |
| mtctr r2 |
| li r0, 0 |
| 1: |
| dcbz r0, r3 |
| dcbtls 0,r0, r3 |
| addi r3, r3, 32 |
| bdnz 1b |
| |
| #ifndef CFG_RAMBOOT |
| /* Calculate absolute address in FLASH and jump there */ |
| /*--------------------------------------------------------------*/ |
| lis r3, CFG_MONITOR_BASE@h |
| ori r3, r3, CFG_MONITOR_BASE@l |
| addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET |
| mtlr r3 |
| blr |
| |
| in_flash: |
| #endif /* CFG_RAMBOOT */ |
| |
| /* Setup the stack in initial RAM,could be L2-as-SRAM or L1 dcache*/ |
| lis r1,CFG_INIT_RAM_ADDR@h |
| ori r1,r1,CFG_INIT_SP_OFFSET@l |
| |
| li r0,0 |
| stwu r0,-4(r1) |
| stwu r0,-4(r1) /* Terminate call chain */ |
| |
| stwu r1,-8(r1) /* Save back chain and move SP */ |
| lis r0,RESET_VECTOR@h /* Address of reset vector */ |
| ori r0,r0, RESET_VECTOR@l |
| stwu r1,-8(r1) /* Save back chain and move SP */ |
| stw r0,+12(r1) /* Save return addr (underflow vect) */ |
| |
| GET_GOT |
| bl cpu_init_f |
| bl icache_enable |
| bl board_init_f |
| sync |
| |
| |
| /* --FIXME-- machine check with MCSRRn and rfmci */ |
| |
| .globl _start_of_vectors |
| _start_of_vectors: |
| #if 0 |
| /* Critical input. */ |
| CRIT_EXCEPTION(0x0100, CritcalInput, CritcalInputException) |
| #endif |
| /* Machine check --FIXME-- Should be MACH_EXCEPTION */ |
| CRIT_EXCEPTION(0x0200, MachineCheck, MachineCheckException) |
| |
| /* Data Storage exception. */ |
| STD_EXCEPTION(0x0300, DataStorage, UnknownException) |
| |
| /* Instruction Storage exception. */ |
| STD_EXCEPTION(0x0400, InstStorage, UnknownException) |
| |
| /* External Interrupt exception. */ |
| STD_EXCEPTION(0x0500, ExtInterrupt, UnknownException) |
| |
| /* Alignment exception. */ |
| . = 0x0600 |
| Alignment: |
| EXCEPTION_PROLOG |
| mfspr r4,DAR |
| stw r4,_DAR(r21) |
| mfspr r5,DSISR |
| stw r5,_DSISR(r21) |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| li r20,MSR_KERNEL |
| rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ |
| lwz r6,GOT(transfer_to_handler) |
| mtlr r6 |
| blrl |
| .L_Alignment: |
| .long AlignmentException - _start + EXC_OFF_SYS_RESET |
| .long int_return - _start + EXC_OFF_SYS_RESET |
| |
| /* Program check exception */ |
| . = 0x0700 |
| ProgramCheck: |
| EXCEPTION_PROLOG |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| li r20,MSR_KERNEL |
| rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ |
| lwz r6,GOT(transfer_to_handler) |
| mtlr r6 |
| blrl |
| .L_ProgramCheck: |
| .long ProgramCheckException - _start + EXC_OFF_SYS_RESET |
| .long int_return - _start + EXC_OFF_SYS_RESET |
| |
| /* No FPU on MPC85xx. This exception is not supposed to happen. |
| */ |
| STD_EXCEPTION(0x0800, FPUnavailable, UnknownException) |
| STD_EXCEPTION(0x0900, Decrementer, timer_interrupt) |
| STD_EXCEPTION(0x0a00, Trap_0a, UnknownException) |
| STD_EXCEPTION(0x0b00, Trap_0b, UnknownException) |
| |
| . = 0x0c00 |
| /* |
| * r0 - SYSCALL number |
| * r3-... arguments |
| */ |
| SystemCall: |
| addis r11,r0,0 /* get functions table addr */ |
| ori r11,r11,0 /* Note: this code is patched in trap_init */ |
| addis r12,r0,0 /* get number of functions */ |
| ori r12,r12,0 |
| |
| cmplw 0, r0, r12 |
| bge 1f |
| |
| rlwinm r0,r0,2,0,31 /* fn_addr = fn_tbl[r0] */ |
| add r11,r11,r0 |
| lwz r11,0(r11) |
| |
| li r20,0xd00-4 /* Get stack pointer */ |
| lwz r12,0(r20) |
| subi r12,r12,12 /* Adjust stack pointer */ |
| li r0,0xc00+_end_back-SystemCall |
| cmplw 0, r0, r12 /* Check stack overflow */ |
| bgt 1f |
| stw r12,0(r20) |
| |
| mflr r0 |
| stw r0,0(r12) |
| mfspr r0,SRR0 |
| stw r0,4(r12) |
| mfspr r0,SRR1 |
| stw r0,8(r12) |
| |
| li r12,0xc00+_back-SystemCall |
| mtlr r12 |
| mtspr SRR0,r11 |
| |
| 1: SYNC |
| rfi |
| _back: |
| |
| mfmsr r11 /* Disable interrupts */ |
| li r12,0 |
| ori r12,r12,MSR_EE |
| andc r11,r11,r12 |
| SYNC /* Some chip revs need this... */ |
| mtmsr r11 |
| SYNC |
| |
| li r12,0xd00-4 /* restore regs */ |
| lwz r12,0(r12) |
| |
| lwz r11,0(r12) |
| mtlr r11 |
| lwz r11,4(r12) |
| mtspr SRR0,r11 |
| lwz r11,8(r12) |
| mtspr SRR1,r11 |
| |
| addi r12,r12,12 /* Adjust stack pointer */ |
| li r20,0xd00-4 |
| stw r12,0(r20) |
| |
| SYNC |
| rfi |
| _end_back: |
| |
| STD_EXCEPTION(0xd00, SingleStep, UnknownException) |
| |
| STD_EXCEPTION(0xe00, Trap_0e, UnknownException) |
| STD_EXCEPTION(0xf00, Trap_0f, UnknownException) |
| |
| STD_EXCEPTION(0x1000, PIT, PITException) |
| |
| STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException) |
| STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException) |
| STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException) |
| STD_EXCEPTION(0x1400, DataTLBError, UnknownException) |
| |
| STD_EXCEPTION(0x1500, Reserved5, UnknownException) |
| STD_EXCEPTION(0x1600, Reserved6, UnknownException) |
| STD_EXCEPTION(0x1700, Reserved7, UnknownException) |
| STD_EXCEPTION(0x1800, Reserved8, UnknownException) |
| STD_EXCEPTION(0x1900, Reserved9, UnknownException) |
| STD_EXCEPTION(0x1a00, ReservedA, UnknownException) |
| STD_EXCEPTION(0x1b00, ReservedB, UnknownException) |
| |
| STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException) |
| STD_EXCEPTION(0x1d00, InstructionBreakpoint, UnknownException) |
| STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException) |
| STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException) |
| |
| CRIT_EXCEPTION(0x2000, DebugBreakpoint, DebugException ) |
| |
| .globl _end_of_vectors |
| _end_of_vectors: |
| |
| |
| . = 0x2100 |
| |
| /* |
| * This code finishes saving the registers to the exception frame |
| * and jumps to the appropriate handler for the exception. |
| * Register r21 is pointer into trap frame, r1 has new stack pointer. |
| */ |
| .globl transfer_to_handler |
| transfer_to_handler: |
| stw r22,_NIP(r21) |
| lis r22,MSR_POW@h |
| andc r23,r23,r22 |
| stw r23,_MSR(r21) |
| SAVE_GPR(7, r21) |
| SAVE_4GPRS(8, r21) |
| SAVE_8GPRS(12, r21) |
| SAVE_8GPRS(24, r21) |
| |
| mflr r23 |
| andi. r24,r23,0x3f00 /* get vector offset */ |
| stw r24,TRAP(r21) |
| li r22,0 |
| stw r22,RESULT(r21) |
| mtspr SPRG2,r22 /* r1 is now kernel sp */ |
| |
| lwz r24,0(r23) /* virtual address of handler */ |
| lwz r23,4(r23) /* where to go when done */ |
| mtspr SRR0,r24 |
| mtspr SRR1,r20 |
| mtlr r23 |
| SYNC |
| rfi /* jump to handler, enable MMU */ |
| |
| int_return: |
| mfmsr r28 /* Disable interrupts */ |
| li r4,0 |
| ori r4,r4,MSR_EE |
| andc r28,r28,r4 |
| SYNC /* Some chip revs need this... */ |
| mtmsr r28 |
| SYNC |
| lwz r2,_CTR(r1) |
| lwz r0,_LINK(r1) |
| mtctr r2 |
| mtlr r0 |
| lwz r2,_XER(r1) |
| lwz r0,_CCR(r1) |
| mtspr XER,r2 |
| mtcrf 0xFF,r0 |
| REST_10GPRS(3, r1) |
| REST_10GPRS(13, r1) |
| REST_8GPRS(23, r1) |
| REST_GPR(31, r1) |
| lwz r2,_NIP(r1) /* Restore environment */ |
| lwz r0,_MSR(r1) |
| mtspr SRR0,r2 |
| mtspr SRR1,r0 |
| lwz r0,GPR0(r1) |
| lwz r2,GPR2(r1) |
| lwz r1,GPR1(r1) |
| SYNC |
| rfi |
| |
| crit_return: |
| mfmsr r28 /* Disable interrupts */ |
| li r4,0 |
| ori r4,r4,MSR_EE |
| andc r28,r28,r4 |
| SYNC /* Some chip revs need this... */ |
| mtmsr r28 |
| SYNC |
| lwz r2,_CTR(r1) |
| lwz r0,_LINK(r1) |
| mtctr r2 |
| mtlr r0 |
| lwz r2,_XER(r1) |
| lwz r0,_CCR(r1) |
| mtspr XER,r2 |
| mtcrf 0xFF,r0 |
| REST_10GPRS(3, r1) |
| REST_10GPRS(13, r1) |
| REST_8GPRS(23, r1) |
| REST_GPR(31, r1) |
| lwz r2,_NIP(r1) /* Restore environment */ |
| lwz r0,_MSR(r1) |
| mtspr 990,r2 /* SRR2 */ |
| mtspr 991,r0 /* SRR3 */ |
| lwz r0,GPR0(r1) |
| lwz r2,GPR2(r1) |
| lwz r1,GPR1(r1) |
| SYNC |
| rfci |
| |
| /* Cache functions. |
| */ |
| invalidate_icache: |
| mfspr r0,L1CSR1 |
| ori r0,r0,0x0002 |
| mtspr L1CSR1,r0 |
| isync |
| blr /* entire I cache */ |
| |
| invalidate_dcache: |
| mfspr r0,L1CSR0 |
| ori r0,r0,0x0002 |
| msync |
| isync |
| mtspr L1CSR0,r0 |
| isync |
| blr |
| |
| .globl icache_enable |
| icache_enable: |
| mflr r8 |
| bl invalidate_icache |
| mtlr r8 |
| isync |
| mfspr r4,L1CSR1 |
| ori r4,r4,0x0001 |
| oris r4,r4,0x0001 |
| mtspr L1CSR1,r4 |
| isync |
| blr |
| |
| .globl icache_disable |
| icache_disable: |
| mfspr r0,L1CSR1 |
| lis r1,0xfffffffe@h |
| ori r1,r1,0xfffffffe@l |
| and r0,r0,r1 |
| mtspr L1CSR1,r0 |
| isync |
| blr |
| |
| .globl icache_status |
| icache_status: |
| mfspr r3,L1CSR1 |
| srwi r3, r3, 31 /* >>31 => select bit 0 */ |
| blr |
| |
| .globl dcache_enable |
| dcache_enable: |
| mflr r8 |
| bl invalidate_dcache |
| mtlr r8 |
| isync |
| mfspr r0,L1CSR0 |
| ori r0,r0,0x0001 |
| oris r0,r0,0x0001 |
| msync |
| isync |
| mtspr L1CSR0,r0 |
| isync |
| blr |
| |
| .globl dcache_disable |
| dcache_disable: |
| mfspr r0,L1CSR0 |
| lis r1,0xfffffffe@h |
| ori r1,r1,0xfffffffe@l |
| and r0,r0,r1 |
| msync |
| isync |
| mtspr L1CSR0,r0 |
| isync |
| blr |
| |
| .globl dcache_status |
| dcache_status: |
| mfspr r3,L1CSR0 |
| srwi r3, r3, 31 /* >>31 => select bit 0 */ |
| blr |
| |
| .globl get_pir |
| get_pir: |
| mfspr r3, PIR |
| blr |
| |
| .globl get_pvr |
| get_pvr: |
| mfspr r3, PVR |
| blr |
| |
| .globl wr_tcr |
| wr_tcr: |
| mtspr TCR, r3 |
| blr |
| |
| /*------------------------------------------------------------------------------- */ |
| /* Function: in8 */ |
| /* Description: Input 8 bits */ |
| /*------------------------------------------------------------------------------- */ |
| .globl in8 |
| in8: |
| lbz r3,0x0000(r3) |
| blr |
| |
| /*------------------------------------------------------------------------------- */ |
| /* Function: out8 */ |
| /* Description: Output 8 bits */ |
| /*------------------------------------------------------------------------------- */ |
| .globl out8 |
| out8: |
| stb r4,0x0000(r3) |
| blr |
| |
| /*------------------------------------------------------------------------------- */ |
| /* Function: out16 */ |
| /* Description: Output 16 bits */ |
| /*------------------------------------------------------------------------------- */ |
| .globl out16 |
| out16: |
| sth r4,0x0000(r3) |
| blr |
| |
| /*------------------------------------------------------------------------------- */ |
| /* Function: out16r */ |
| /* Description: Byte reverse and output 16 bits */ |
| /*------------------------------------------------------------------------------- */ |
| .globl out16r |
| out16r: |
| sthbrx r4,r0,r3 |
| blr |
| |
| /*------------------------------------------------------------------------------- */ |
| /* Function: out32 */ |
| /* Description: Output 32 bits */ |
| /*------------------------------------------------------------------------------- */ |
| .globl out32 |
| out32: |
| stw r4,0x0000(r3) |
| blr |
| |
| /*------------------------------------------------------------------------------- */ |
| /* Function: out32r */ |
| /* Description: Byte reverse and output 32 bits */ |
| /*------------------------------------------------------------------------------- */ |
| .globl out32r |
| out32r: |
| stwbrx r4,r0,r3 |
| blr |
| |
| /*------------------------------------------------------------------------------- */ |
| /* Function: in16 */ |
| /* Description: Input 16 bits */ |
| /*------------------------------------------------------------------------------- */ |
| .globl in16 |
| in16: |
| lhz r3,0x0000(r3) |
| blr |
| |
| /*------------------------------------------------------------------------------- */ |
| /* Function: in16r */ |
| /* Description: Input 16 bits and byte reverse */ |
| /*------------------------------------------------------------------------------- */ |
| .globl in16r |
| in16r: |
| lhbrx r3,r0,r3 |
| blr |
| |
| /*------------------------------------------------------------------------------- */ |
| /* Function: in32 */ |
| /* Description: Input 32 bits */ |
| /*------------------------------------------------------------------------------- */ |
| .globl in32 |
| in32: |
| lwz 3,0x0000(3) |
| blr |
| |
| /*------------------------------------------------------------------------------- */ |
| /* Function: in32r */ |
| /* Description: Input 32 bits and byte reverse */ |
| /*------------------------------------------------------------------------------- */ |
| .globl in32r |
| in32r: |
| lwbrx r3,r0,r3 |
| blr |
| |
| /*------------------------------------------------------------------------------- */ |
| /* Function: ppcDcbf */ |
| /* Description: Data Cache block flush */ |
| /* Input: r3 = effective address */ |
| /* Output: none. */ |
| /*------------------------------------------------------------------------------- */ |
| .globl ppcDcbf |
| ppcDcbf: |
| dcbf r0,r3 |
| blr |
| |
| /*------------------------------------------------------------------------------- */ |
| /* Function: ppcDcbi */ |
| /* Description: Data Cache block Invalidate */ |
| /* Input: r3 = effective address */ |
| /* Output: none. */ |
| /*------------------------------------------------------------------------------- */ |
| .globl ppcDcbi |
| ppcDcbi: |
| dcbi r0,r3 |
| blr |
| |
| /*------------------------------------------------------------------------------- */ |
| /* Function: ppcSync */ |
| /* Description: Processor Synchronize */ |
| /* Input: none. */ |
| /* Output: none. */ |
| /*------------------------------------------------------------------------------- */ |
| .globl ppcSync |
| ppcSync: |
| sync |
| blr |
| |
| /*------------------------------------------------------------------------------*/ |
| |
| /* |
| * void relocate_code (addr_sp, gd, addr_moni) |
| * |
| * This "function" does not return, instead it continues in RAM |
| * after relocating the monitor code. |
| * |
| * r3 = dest |
| * r4 = src |
| * r5 = length in bytes |
| * r6 = cachelinesize |
| */ |
| .globl relocate_code |
| relocate_code: |
| mr r1, r3 /* Set new stack pointer */ |
| mr r9, r4 /* Save copy of Init Data pointer */ |
| mr r10, r5 /* Save copy of Destination Address */ |
| |
| mr r3, r5 /* Destination Address */ |
| lis r4, CFG_MONITOR_BASE@h /* Source Address */ |
| ori r4, r4, CFG_MONITOR_BASE@l |
| lwz r5,GOT(__init_end) |
| sub r5,r5,r4 |
| li r6, CFG_CACHELINE_SIZE /* Cache Line Size */ |
| |
| /* |
| * Fix GOT pointer: |
| * |
| * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address |
| * |
| * Offset: |
| */ |
| sub r15, r10, r4 |
| |
| /* First our own GOT */ |
| add r14, r14, r15 |
| /* the the one used by the C code */ |
| add r30, r30, r15 |
| |
| /* |
| * Now relocate code |
| */ |
| |
| cmplw cr1,r3,r4 |
| addi r0,r5,3 |
| srwi. r0,r0,2 |
| beq cr1,4f /* In place copy is not necessary */ |
| beq 7f /* Protect against 0 count */ |
| mtctr r0 |
| bge cr1,2f |
| |
| la r8,-4(r4) |
| la r7,-4(r3) |
| 1: lwzu r0,4(r8) |
| stwu r0,4(r7) |
| bdnz 1b |
| b 4f |
| |
| 2: slwi r0,r0,2 |
| add r8,r4,r0 |
| add r7,r3,r0 |
| 3: lwzu r0,-4(r8) |
| stwu r0,-4(r7) |
| bdnz 3b |
| |
| /* |
| * Now flush the cache: note that we must start from a cache aligned |
| * address. Otherwise we might miss one cache line. |
| */ |
| 4: cmpwi r6,0 |
| add r5,r3,r5 |
| beq 7f /* Always flush prefetch queue in any case */ |
| subi r0,r6,1 |
| andc r3,r3,r0 |
| mr r4,r3 |
| 5: dcbst 0,r4 |
| add r4,r4,r6 |
| cmplw r4,r5 |
| blt 5b |
| sync /* Wait for all dcbst to complete on bus */ |
| mr r4,r3 |
| 6: icbi 0,r4 |
| add r4,r4,r6 |
| cmplw r4,r5 |
| blt 6b |
| 7: sync /* Wait for all icbi to complete on bus */ |
| isync |
| |
| /* |
| * We are done. Do not return, instead branch to second part of board |
| * initialization, now running from RAM. |
| */ |
| |
| addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET |
| mtlr r0 |
| blr /* NEVER RETURNS! */ |
| |
| in_ram: |
| |
| /* |
| * Relocation Function, r14 point to got2+0x8000 |
| * |
| * Adjust got2 pointers, no need to check for 0, this code |
| * already puts a few entries in the table. |
| */ |
| li r0,__got2_entries@sectoff@l |
| la r3,GOT(_GOT2_TABLE_) |
| lwz r11,GOT(_GOT2_TABLE_) |
| mtctr r0 |
| sub r11,r3,r11 |
| addi r3,r3,-4 |
| 1: lwzu r0,4(r3) |
| add r0,r0,r11 |
| stw r0,0(r3) |
| bdnz 1b |
| |
| /* |
| * Now adjust the fixups and the pointers to the fixups |
| * in case we need to move ourselves again. |
| */ |
| 2: li r0,__fixup_entries@sectoff@l |
| lwz r3,GOT(_FIXUP_TABLE_) |
| cmpwi r0,0 |
| mtctr r0 |
| addi r3,r3,-4 |
| beq 4f |
| 3: lwzu r4,4(r3) |
| lwzux r0,r4,r11 |
| add r0,r0,r11 |
| stw r10,0(r3) |
| stw r0,0(r4) |
| bdnz 3b |
| 4: |
| clear_bss: |
| /* |
| * Now clear BSS segment |
| */ |
| lwz r3,GOT(__bss_start) |
| lwz r4,GOT(_end) |
| |
| cmplw 0, r3, r4 |
| beq 6f |
| |
| li r0, 0 |
| 5: |
| stw r0, 0(r3) |
| addi r3, r3, 4 |
| cmplw 0, r3, r4 |
| bne 5b |
| 6: |
| |
| mr r3, r9 /* Init Data pointer */ |
| mr r4, r10 /* Destination Address */ |
| bl board_init_r |
| |
| /* |
| * Copy exception vector code to low memory |
| * |
| * r3: dest_addr |
| * r7: source address, r8: end address, r9: target address |
| */ |
| .globl trap_init |
| trap_init: |
| lwz r7, GOT(_start) |
| lwz r8, GOT(_end_of_vectors) |
| |
| li r9, 0x100 /* reset vector always at 0x100 */ |
| |
| cmplw 0, r7, r8 |
| bgelr /* return if r7>=r8 - just in case */ |
| |
| mflr r4 /* save link register */ |
| 1: |
| lwz r0, 0(r7) |
| stw r0, 0(r9) |
| addi r7, r7, 4 |
| addi r9, r9, 4 |
| cmplw 0, r7, r8 |
| bne 1b |
| |
| /* |
| * relocate `hdlr' and `int_return' entries |
| */ |
| li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET |
| li r8, Alignment - _start + EXC_OFF_SYS_RESET |
| 2: |
| bl trap_reloc |
| addi r7, r7, 0x100 /* next exception vector */ |
| cmplw 0, r7, r8 |
| blt 2b |
| |
| li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET |
| bl trap_reloc |
| |
| li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET |
| bl trap_reloc |
| |
| li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET |
| li r8, SystemCall - _start + EXC_OFF_SYS_RESET |
| 3: |
| bl trap_reloc |
| addi r7, r7, 0x100 /* next exception vector */ |
| cmplw 0, r7, r8 |
| blt 3b |
| |
| li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET |
| li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET |
| 4: |
| bl trap_reloc |
| addi r7, r7, 0x100 /* next exception vector */ |
| cmplw 0, r7, r8 |
| blt 4b |
| |
| mtlr r4 /* restore link register */ |
| blr |
| |
| /* |
| * Function: relocate entries for one exception vector |
| */ |
| trap_reloc: |
| lwz r0, 0(r7) /* hdlr ... */ |
| add r0, r0, r3 /* ... += dest_addr */ |
| stw r0, 0(r7) |
| |
| lwz r0, 4(r7) /* int_return ... */ |
| add r0, r0, r3 /* ... += dest_addr */ |
| stw r0, 4(r7) |
| |
| blr |
| |
| #ifdef CFG_INIT_RAM_LOCK |
| .globl unlock_ram_in_cache |
| unlock_ram_in_cache: |
| /* invalidate the INIT_RAM section */ |
| lis r3, (CFG_INIT_RAM_ADDR & ~31)@h |
| ori r3, r3, (CFG_INIT_RAM_ADDR & ~31)@l |
| li r2,512 |
| mtctr r2 |
| 1: icbi r0, r3 |
| dcbi r0, r3 |
| addi r3, r3, 32 |
| bdnz 1b |
| sync /* Wait for all icbi to complete on bus */ |
| isync |
| blr |
| #endif |