| /* |
| * clock_am43xx.c |
| * |
| * clocks for AM43XX based boards |
| * Derived from AM33XX based boards |
| * |
| * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/ |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <asm/arch/cpu.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/io.h> |
| |
| struct cm_perpll *const cmper = (struct cm_perpll *)CM_PER; |
| struct cm_wkuppll *const cmwkup = (struct cm_wkuppll *)CM_WKUP; |
| struct cm_dpll *const cmdpll = (struct cm_dpll *)CM_DPLL; |
| |
| const struct dpll_regs dpll_mpu_regs = { |
| .cm_clkmode_dpll = CM_WKUP + 0x560, |
| .cm_idlest_dpll = CM_WKUP + 0x564, |
| .cm_clksel_dpll = CM_WKUP + 0x56c, |
| .cm_div_m2_dpll = CM_WKUP + 0x570, |
| }; |
| |
| const struct dpll_regs dpll_core_regs = { |
| .cm_clkmode_dpll = CM_WKUP + 0x520, |
| .cm_idlest_dpll = CM_WKUP + 0x524, |
| .cm_clksel_dpll = CM_WKUP + 0x52C, |
| .cm_div_m4_dpll = CM_WKUP + 0x538, |
| .cm_div_m5_dpll = CM_WKUP + 0x53C, |
| .cm_div_m6_dpll = CM_WKUP + 0x540, |
| }; |
| |
| const struct dpll_regs dpll_per_regs = { |
| .cm_clkmode_dpll = CM_WKUP + 0x5E0, |
| .cm_idlest_dpll = CM_WKUP + 0x5E4, |
| .cm_clksel_dpll = CM_WKUP + 0x5EC, |
| .cm_div_m2_dpll = CM_WKUP + 0x5F0, |
| }; |
| |
| const struct dpll_regs dpll_ddr_regs = { |
| .cm_clkmode_dpll = CM_WKUP + 0x5A0, |
| .cm_idlest_dpll = CM_WKUP + 0x5A4, |
| .cm_clksel_dpll = CM_WKUP + 0x5AC, |
| .cm_div_m2_dpll = CM_WKUP + 0x5B0, |
| .cm_div_m4_dpll = CM_WKUP + 0x5B8, |
| }; |
| |
| void setup_clocks_for_console(void) |
| { |
| u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED; |
| |
| /* Do not add any spl_debug prints in this function */ |
| clrsetbits_le32(&cmwkup->wkclkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, |
| CD_CLKCTRL_CLKTRCTRL_SW_WKUP << |
| CD_CLKCTRL_CLKTRCTRL_SHIFT); |
| |
| /* Enable UART0 */ |
| clrsetbits_le32(&cmwkup->wkup_uart0ctrl, |
| MODULE_CLKCTRL_MODULEMODE_MASK, |
| MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << |
| MODULE_CLKCTRL_MODULEMODE_SHIFT); |
| |
| while ((idlest == MODULE_CLKCTRL_IDLEST_DISABLED) || |
| (idlest == MODULE_CLKCTRL_IDLEST_TRANSITIONING)) { |
| clkctrl = readl(&cmwkup->wkup_uart0ctrl); |
| idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >> |
| MODULE_CLKCTRL_IDLEST_SHIFT; |
| } |
| } |
| |
| void enable_basic_clocks(void) |
| { |
| u32 *const clk_domains[] = { |
| &cmper->l3clkstctrl, |
| &cmper->l3sclkstctrl, |
| &cmper->l4lsclkstctrl, |
| &cmwkup->wkclkstctrl, |
| &cmper->emifclkstctrl, |
| 0 |
| }; |
| |
| u32 *const clk_modules_explicit_en[] = { |
| &cmper->l3clkctrl, |
| &cmper->l4lsclkctrl, |
| &cmper->l4fwclkctrl, |
| &cmwkup->wkl4wkclkctrl, |
| &cmper->l3instrclkctrl, |
| &cmper->l4hsclkctrl, |
| &cmwkup->wkgpio0clkctrl, |
| &cmwkup->wkctrlclkctrl, |
| &cmper->timer2clkctrl, |
| &cmper->gpmcclkctrl, |
| &cmper->elmclkctrl, |
| &cmper->mmc0clkctrl, |
| &cmper->mmc1clkctrl, |
| &cmwkup->wkup_i2c0ctrl, |
| &cmper->gpio1clkctrl, |
| &cmper->gpio2clkctrl, |
| &cmper->gpio3clkctrl, |
| &cmper->gpio4clkctrl, |
| &cmper->gpio5clkctrl, |
| &cmper->i2c1clkctrl, |
| &cmper->cpgmac0clkctrl, |
| &cmper->emiffwclkctrl, |
| &cmper->emifclkctrl, |
| &cmper->otfaemifclkctrl, |
| &cmper->qspiclkctrl, |
| &cmper->usb0clkctrl, |
| &cmper->usbphyocp2scp0clkctrl, |
| &cmper->usb1clkctrl, |
| &cmper->usbphyocp2scp1clkctrl, |
| &cmper->spi0clkctrl, |
| 0 |
| }; |
| |
| setbits_le32(&cmper->usb0clkctrl, |
| USBOTGSSX_CLKCTRL_OPTFCLKEN_REFCLK960); |
| setbits_le32(&cmwkup->usbphy0clkctrl, |
| USBPHY0_CLKCTRL_OPTFCLKEN_CLK32K); |
| setbits_le32(&cmper->usb1clkctrl, |
| USBOTGSSX_CLKCTRL_OPTFCLKEN_REFCLK960); |
| setbits_le32(&cmwkup->usbphy1clkctrl, |
| USBPHY0_CLKCTRL_OPTFCLKEN_CLK32K); |
| do_enable_clocks(clk_domains, clk_modules_explicit_en, 1); |
| |
| /* Select the Master osc clk as Timer2 clock source */ |
| writel(0x1, &cmdpll->clktimer2clk); |
| |
| /* For OPP100 the mac clock should be /5. */ |
| writel(0x4, &cmdpll->clkselmacclk); |
| } |
| |
| #ifdef CONFIG_TI_EDMA3 |
| void enable_edma3_clocks(void) |
| { |
| u32 *const clk_domains_edma3[] = { |
| 0 |
| }; |
| |
| u32 *const clk_modules_explicit_en_edma3[] = { |
| &cmper->tpccclkctrl, |
| &cmper->tptc0clkctrl, |
| 0 |
| }; |
| |
| do_enable_clocks(clk_domains_edma3, |
| clk_modules_explicit_en_edma3, |
| 1); |
| } |
| |
| void disable_edma3_clocks(void) |
| { |
| u32 *const clk_domains_edma3[] = { |
| 0 |
| }; |
| |
| u32 *const clk_modules_disable_edma3[] = { |
| &cmper->tpccclkctrl, |
| &cmper->tptc0clkctrl, |
| 0 |
| }; |
| |
| do_disable_clocks(clk_domains_edma3, |
| clk_modules_disable_edma3, |
| 1); |
| } |
| #endif |