| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright 2022 Marek Vasut <marex@denx.de> |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/net/qca-ar803x.h> |
| #include <dt-bindings/phy/phy-imx8-pcie.h> |
| #include "imx8mm.dtsi" |
| |
| / { |
| model = "Data Modul i.MX8M Mini eDM SBC"; |
| compatible = "dmo,imx8mm-data-modul-edm-sbc", "fsl,imx8mm"; |
| |
| aliases { |
| rtc0 = &rtc; |
| rtc1 = &snvs_rtc; |
| }; |
| |
| chosen { |
| stdout-path = &uart3; |
| }; |
| |
| memory@40000000 { |
| device_type = "memory"; |
| /* There are 1/2/4 GiB options, adjusted by bootloader. */ |
| reg = <0x0 0x40000000 0 0x40000000>; |
| }; |
| |
| backlight: backlight { |
| compatible = "pwm-backlight"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_panel_backlight>; |
| brightness-levels = <0 1 10 20 30 40 50 60 70 75 80 90 100>; |
| default-brightness-level = <7>; |
| enable-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; |
| pwms = <&pwm1 0 5000000>; |
| /* Disabled by default, unless display board plugged in. */ |
| status = "disabled"; |
| }; |
| |
| clk_xtal25: clk-xtal25 { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <25000000>; |
| }; |
| |
| panel: panel { |
| backlight = <&backlight>; |
| power-supply = <®_panel_vcc>; |
| /* Disabled by default, unless display board plugged in. */ |
| status = "disabled"; |
| }; |
| |
| reg_panel_vcc: regulator-panel-vcc { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_panel_vcc_reg>; |
| regulator-name = "PANEL_VCC"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio3 6 0>; |
| enable-active-high; |
| /* Disabled by default, unless display board plugged in. */ |
| status = "disabled"; |
| }; |
| |
| reg_usdhc2_vcc: regulator-usdhc2-vcc { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc2_vcc_reg>; |
| regulator-name = "V_3V3_SD"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio2 19 0>; |
| enable-active-high; |
| }; |
| |
| watchdog-gpio { |
| /* TPS3813 */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_watchdog_gpio>; |
| compatible = "linux,wdt-gpio"; |
| always-enabled; |
| gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; |
| hw_algo = "level"; |
| /* Reset triggers in 2..3 seconds */ |
| hw_margin_ms = <1500>; |
| /* Disabled by default */ |
| status = "disabled"; |
| }; |
| }; |
| |
| &A53_0 { |
| cpu-supply = <&buck2_reg>; |
| }; |
| |
| &A53_1 { |
| cpu-supply = <&buck2_reg>; |
| }; |
| |
| &A53_2 { |
| cpu-supply = <&buck2_reg>; |
| }; |
| |
| &A53_3 { |
| cpu-supply = <&buck2_reg>; |
| }; |
| |
| &ddrc { |
| operating-points-v2 = <&ddrc_opp_table>; |
| |
| ddrc_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-25M { |
| opp-hz = /bits/ 64 <25000000>; |
| }; |
| |
| opp-100M { |
| opp-hz = /bits/ 64 <100000000>; |
| }; |
| |
| opp-750M { |
| opp-hz = /bits/ 64 <750000000>; |
| }; |
| }; |
| }; |
| |
| &ecspi1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi1>; |
| cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| |
| flash@0 { /* W25Q128FVSI */ |
| compatible = "jedec,spi-nor"; |
| m25p,fast-read; |
| spi-max-frequency = <50000000>; |
| reg = <0>; |
| }; |
| }; |
| |
| &ecspi2 { /* Feature connector SPI */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi2>; |
| cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; |
| /* Disabled by default, unless feature board plugged in. */ |
| status = "disabled"; |
| }; |
| |
| &ecspi3 { /* Display connector SPI */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi3>; |
| cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; |
| /* Disabled by default, unless display board plugged in. */ |
| status = "disabled"; |
| }; |
| |
| &fec1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_fec1>; |
| phy-mode = "rgmii-id"; |
| phy-handle = <&fec1_phy>; |
| phy-supply = <&buck4_reg>; |
| fsl,magic-packet; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| /* Atheros AR8031 PHY */ |
| fec1_phy: ethernet-phy@0 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <0>; |
| /* |
| * Dedicated ENET_WOL# signal is unused, the PHY |
| * can wake the SoC up via INT signal as well. |
| */ |
| interrupts-extended = <&gpio1 15 IRQ_TYPE_LEVEL_LOW>; |
| reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; |
| reset-assert-us = <10000>; |
| reset-deassert-us = <10000>; |
| qca,clk-out-frequency = <125000000>; |
| qca,clk-out-strength = <AR803X_STRENGTH_FULL>; |
| qca,keep-pll-enabled; |
| vddio-supply = <&vddio>; |
| |
| vddio: vddio-regulator { |
| regulator-name = "VDDIO"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| vddh: vddh-regulator { |
| regulator-name = "VDDH"; |
| }; |
| }; |
| }; |
| }; |
| |
| &gpio1 { |
| gpio-line-names = |
| "", "ENET_RST#", "WDOG_B#", "PMIC_INT#", |
| "", "M2-B_PCIE_RST#", "M2-B_PCIE_WAKE#", "RTC_IRQ#", |
| "WDOG_KICK#", "M2-B_PCIE_CLKREQ#", |
| "USB1_OTG_ID_3V3", "ENET_WOL#", |
| "", "", "", "ENET_INT#", |
| "", "", "", "", "", "", "", "", |
| "", "", "", "", "", "", "", ""; |
| }; |
| |
| &gpio2 { |
| gpio-line-names = |
| "MEMCFG2", "MEMCFG1", "DSI_RESET_1V8#", "DSI_IRQ_1V8#", |
| "M2-B_FULL_CARD_PWROFF_1V8#", "EEPROM_WP_1V8#", |
| "PCIE_CLK_GEN_CLKPWRGD_PD_1V8#", "GRAPHICS_PRSNT_1V8#", |
| "MEMCFG0", "WDOG_EN", |
| "M2-B_W_DISABLE1_WWAN_1V8#", "M2-B_W_DISABLE2_GPS_1V8#", |
| "", "", "", "", |
| "", "", "", "SD2_RESET#", "", "", "", "", |
| "", "", "", "", "", "", "", ""; |
| }; |
| |
| &gpio3 { |
| gpio-line-names = |
| "BL_ENABLE_1V8", "PG_V_IN_VAR#", "", "", |
| "", "", "TFT_ENABLE_1V8", "GRAPHICS_GPIO0_1V8", |
| "CSI_PD_1V8", "CSI_RESET_1V8#", "", "", |
| "", "", "", "", |
| "", "", "", "M2-B_WAKE_WWAN_1V8#", |
| "M2-B_RESET_1V8#", "", "", "", |
| "", "", "", "", "", "", "", ""; |
| }; |
| |
| &gpio4 { |
| gpio-line-names = |
| "NC0", "NC1", "BOOTCFG0", "BOOTCFG1", |
| "BOOTCFG2", "BOOTCFG3", "BOOTCFG4", "BOOTCFG5", |
| "BOOTCFG6", "BOOTCFG7", "NC10", "NC11", |
| "BOOTCFG8", "BOOTCFG9", "BOOTCFG10", "BOOTCFG11", |
| "BOOTCFG12", "BOOTCFG13", "BOOTCFG14", "BOOTCFG15", |
| "NC20", "", "", "", |
| "", "CAN_INT#", "CAN_RST#", "GPIO4_IO27", |
| "DIS_USB_DN2", "", "", ""; |
| }; |
| |
| &gpio5 { |
| gpio-line-names = |
| "", "DIS_USB_DN1", "USBHUB_RESET#", "GPIO5_IO03", |
| "GPIO5_IO04", "", "", "", |
| "", "SPI1_CS#", "", "", |
| "", "SPI2_CS#", "I2C1_SCL_3V3", "I2C1_SDA_3V3", |
| "I2C2_SCL_3V3", "I2C2_SDA_3V3", "I2C3_SCL_3V3", "I2C3_SDA_3V3", |
| "I2C4_SCL_3V3", "I2C4_SDA_3V3", "", "", |
| "", "SPI3_CS#", "", "", "", "", "", ""; |
| }; |
| |
| &i2c1 { |
| /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */ |
| clock-frequency = <100000>; |
| pinctrl-names = "default", "gpio"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| pinctrl-1 = <&pinctrl_i2c1_gpio>; |
| scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| status = "okay"; |
| |
| pmic: pmic@4b { |
| compatible = "rohm,bd71847"; |
| reg = <0x4b>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pmic>; |
| interrupt-parent = <&gpio1>; |
| interrupts = <3 IRQ_TYPE_EDGE_FALLING>; |
| rohm,reset-snvs-powered; |
| |
| /* |
| * i.MX 8M Mini Data Sheet for Consumer Products |
| * 3.1.3 Operating ranges |
| * MIMX8MM4DVTLZAA |
| */ |
| regulators { |
| /* VDD_SOC */ |
| buck1_reg: BUCK1 { |
| regulator-name = "buck1"; |
| regulator-min-microvolt = <850000>; |
| regulator-max-microvolt = <850000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <1250>; |
| }; |
| |
| /* VDD_ARM */ |
| buck2_reg: BUCK2 { |
| regulator-name = "buck2"; |
| regulator-min-microvolt = <850000>; |
| regulator-max-microvolt = <1050000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <1250>; |
| rohm,dvs-run-voltage = <1000000>; |
| rohm,dvs-idle-voltage = <950000>; |
| }; |
| |
| /* VDD_DRAM, BUCK5 */ |
| buck3_reg: BUCK3 { |
| regulator-name = "buck3"; |
| /* 1.5 GHz DDR bus clock */ |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <1000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| /* 3V3_VDD, BUCK6 */ |
| buck4_reg: BUCK4 { |
| regulator-name = "buck4"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| /* 1V8_VDD, BUCK7 */ |
| buck5_reg: BUCK5 { |
| regulator-name = "buck5"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| /* 1V1_NVCC_DRAM, BUCK8 */ |
| buck6_reg: BUCK6 { |
| regulator-name = "buck6"; |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1100000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| /* 1V8_NVCC_SNVS */ |
| ldo1_reg: LDO1 { |
| regulator-name = "ldo1"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| /* 0V8_VDD_SNVS */ |
| ldo2_reg: LDO2 { |
| regulator-name = "ldo2"; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| /* 1V8_VDDA */ |
| ldo3_reg: LDO3 { |
| regulator-name = "ldo3"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| /* 0V9_VDD_PHY */ |
| ldo4_reg: LDO4 { |
| regulator-name = "ldo4"; |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <900000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| /* 1V2_VDD_PHY */ |
| ldo6_reg: LDO6 { |
| regulator-name = "ldo6"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c2 { |
| /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */ |
| clock-frequency = <320000>; |
| pinctrl-names = "default", "gpio"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| pinctrl-1 = <&pinctrl_i2c2_gpio>; |
| scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| status = "okay"; |
| |
| usb-hub@2c { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usb_hub>; |
| compatible = "microchip,usb2514bi"; |
| reg = <0x2c>; |
| individual-port-switching; |
| reset-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; |
| self-powered; |
| }; |
| |
| eeprom: eeprom@50 { |
| compatible = "atmel,24c32"; |
| reg = <0x50>; |
| pagesize = <32>; |
| }; |
| |
| rtc: rtc@68 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_rtc>; |
| compatible = "st,m41t62"; |
| reg = <0x68>; |
| interrupts-extended = <&gpio1 7 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| |
| pcieclk: clk@6a { |
| compatible = "renesas,9fgv0241"; |
| reg = <0x6a>; |
| clocks = <&clk_xtal25>; |
| #clock-cells = <1>; |
| }; |
| }; |
| |
| &i2c3 { /* Display connector I2C */ |
| /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */ |
| clock-frequency = <320000>; |
| pinctrl-names = "default", "gpio"; |
| pinctrl-0 = <&pinctrl_i2c3>; |
| pinctrl-1 = <&pinctrl_i2c3_gpio>; |
| scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| status = "okay"; |
| }; |
| |
| &i2c4 { /* Feature connector I2C */ |
| /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */ |
| clock-frequency = <320000>; |
| pinctrl-names = "default", "gpio"; |
| pinctrl-0 = <&pinctrl_i2c4>; |
| pinctrl-1 = <&pinctrl_i2c4_gpio>; |
| scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hog_feature>, <&pinctrl_hog_misc>, |
| <&pinctrl_hog_panel>, <&pinctrl_hog_sbc>, |
| <&pinctrl_panel_expansion>; |
| |
| pinctrl_ecspi1: ecspi1-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x44 |
| MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x44 |
| MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x44 |
| MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x40 |
| >; |
| }; |
| |
| pinctrl_ecspi2: ecspi2-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x44 |
| MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x44 |
| MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x44 |
| MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x40 |
| >; |
| }; |
| |
| pinctrl_ecspi3: ecspi3-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x44 |
| MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x44 |
| MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x44 |
| MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x40 |
| >; |
| }; |
| |
| pinctrl_fec1: fec1-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 |
| MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 |
| MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 |
| MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 |
| MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 |
| MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 |
| MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 |
| MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 |
| MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f |
| MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f |
| MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f |
| MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f |
| MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f |
| MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f |
| /* ENET_RST# */ |
| MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x6 |
| /* ENET_WOL# */ |
| MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x40000090 |
| /* ENET_INT# */ |
| MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000090 |
| >; |
| }; |
| |
| pinctrl_hog_feature: hog-feature-grp { |
| fsl,pins = < |
| /* GPIO4_IO27 */ |
| MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x40000006 |
| /* GPIO5_IO03 */ |
| MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000006 |
| /* GPIO5_IO04 */ |
| MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000006 |
| |
| /* CAN_INT# */ |
| MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x40000090 |
| /* CAN_RST# */ |
| MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x26 |
| >; |
| }; |
| |
| pinctrl_hog_panel: hog-panel-grp { |
| fsl,pins = < |
| /* GRAPHICS_GPIO0_1V8 */ |
| MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x26 |
| >; |
| }; |
| |
| pinctrl_hog_misc: hog-misc-grp { |
| fsl,pins = < |
| /* PG_V_IN_VAR# */ |
| MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x40000000 |
| /* CSI_PD_1V8 */ |
| MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8 0x0 |
| /* CSI_RESET_1V8# */ |
| MX8MM_IOMUXC_NAND_DATA03_GPIO3_IO9 0x0 |
| |
| /* DIS_USB_DN1 */ |
| MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1 0x0 |
| /* DIS_USB_DN2 */ |
| MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x0 |
| |
| /* EEPROM_WP_1V8# */ |
| MX8MM_IOMUXC_SD1_DATA3_GPIO2_IO5 0x100 |
| /* PCIE_CLK_GEN_CLKPWRGD_PD_1V8# */ |
| MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x0 |
| /* GRAPHICS_PRSNT_1V8# */ |
| MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7 0x40000000 |
| |
| /* CLK_CCM_CLKO1_3V3 */ |
| MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1 0x10 |
| >; |
| }; |
| |
| pinctrl_hog_sbc: hog-sbc-grp { |
| fsl,pins = < |
| /* MEMCFG[0..2] straps */ |
| MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x40000140 |
| MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1 0x40000140 |
| MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0 0x40000140 |
| |
| /* BOOT_CFG[0..15] straps */ |
| MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x40000000 |
| MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x40000000 |
| MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x40000000 |
| MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x40000000 |
| MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x40000000 |
| MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000000 |
| MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x40000000 |
| MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x40000000 |
| MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x40000000 |
| MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x40000000 |
| MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x40000000 |
| MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x40000000 |
| MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x40000000 |
| MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x40000000 |
| MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x40000000 |
| MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x40000000 |
| |
| /* Not connected pins */ |
| MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20 0x0 |
| MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x0 |
| MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x0 |
| MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x0 |
| MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x0 |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000084 |
| MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x40000084 |
| >; |
| }; |
| |
| pinctrl_i2c1_gpio: i2c1-gpio-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x84 |
| MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x84 |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000084 |
| MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000084 |
| >; |
| }; |
| |
| pinctrl_i2c2_gpio: i2c2-gpio-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16 0x84 |
| MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17 0x84 |
| >; |
| }; |
| |
| pinctrl_i2c3: i2c3-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000084 |
| MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x40000084 |
| >; |
| }; |
| |
| pinctrl_i2c3_gpio: i2c3-gpio-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x84 |
| MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x84 |
| >; |
| }; |
| |
| pinctrl_i2c4: i2c4-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x40000084 |
| MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x40000084 |
| >; |
| }; |
| |
| pinctrl_i2c4_gpio: i2c4-gpio-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20 0x84 |
| MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0x84 |
| >; |
| }; |
| |
| pinctrl_panel_backlight: panel-backlight-grp { |
| fsl,pins = < |
| /* BL_ENABLE_1V8 */ |
| MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0 0x104 |
| >; |
| }; |
| |
| pinctrl_panel_expansion: panel-expansion-grp { |
| fsl,pins = < |
| /* DSI_RESET_1V8# */ |
| MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2 0x2 |
| /* DSI_IRQ_1V8# */ |
| MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3 0x40000090 |
| >; |
| }; |
| |
| pinctrl_panel_vcc_reg: panel-vcc-grp { |
| fsl,pins = < |
| /* TFT_ENABLE_1V8 */ |
| MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6 0x104 |
| >; |
| }; |
| |
| pinctrl_panel_pwm: panel-pwm-grp { |
| fsl,pins = < |
| /* BL_PWM_3V3 */ |
| MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x12 |
| >; |
| }; |
| |
| pinctrl_pcie0: pcie-grp { |
| fsl,pins = < |
| /* M2-B_RESET_1V8# */ |
| MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x102 |
| /* M2-B_PCIE_RST# */ |
| MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x2 |
| /* M2-B_FULL_CARD_PWROFF_1V8# */ |
| MX8MM_IOMUXC_SD1_DATA2_GPIO2_IO4 0x102 |
| /* M2-B_W_DISABLE1_WWAN_1V8# */ |
| MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x102 |
| /* M2-B_W_DISABLE2_GPS_1V8# */ |
| MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11 0x102 |
| /* CLK_M2_32K768 */ |
| MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x14 |
| /* M2-B_WAKE_WWAN_1V8# */ |
| MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x40000140 |
| /* M2-B_PCIE_WAKE# */ |
| MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000140 |
| /* M2-B_PCIE_CLKREQ# */ |
| MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x40000140 |
| >; |
| }; |
| |
| pinctrl_pmic: pmic-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x40000090 |
| >; |
| }; |
| |
| pinctrl_rtc: rtc-grp { |
| fsl,pins = < |
| /* RTC_IRQ# */ |
| MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x40000090 |
| >; |
| }; |
| |
| pinctrl_sai5: sai5-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK 0x100 |
| MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0 0x0 |
| MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0x100 |
| MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0x100 |
| MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0x100 |
| >; |
| }; |
| |
| pinctrl_uart1: uart1-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x90 |
| MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x90 |
| MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x50 |
| MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x50 |
| >; |
| }; |
| |
| pinctrl_uart2: uart2-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x50 |
| MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x90 |
| MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x50 |
| MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x90 |
| >; |
| }; |
| |
| pinctrl_uart3: uart3-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x40 |
| MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x40 |
| >; |
| }; |
| |
| pinctrl_uart4: uart4-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x40 |
| MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x40 |
| >; |
| }; |
| |
| pinctrl_usb_hub: usb-hub-grp { |
| fsl,pins = < |
| /* USBHUB_RESET# */ |
| MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x4 |
| >; |
| }; |
| |
| pinctrl_usb_otg1: usb-otg1-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x40000000 |
| MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x4 |
| MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x40000090 |
| >; |
| }; |
| |
| pinctrl_usdhc2_vcc_reg: usdhc2-vcc-reg-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x4 |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 |
| MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 |
| MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 |
| MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 |
| MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 |
| MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 |
| MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6 |
| MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x0d6 |
| MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 |
| >; |
| }; |
| |
| pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 |
| MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 |
| MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 |
| MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 |
| MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 |
| MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 |
| MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6 |
| MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x0d6 |
| MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 |
| >; |
| }; |
| |
| pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 |
| MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 |
| MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 |
| MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 |
| MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 |
| MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 |
| MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6 |
| MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x0d6 |
| MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 |
| >; |
| }; |
| |
| pinctrl_usdhc3: usdhc3-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 |
| MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 |
| MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 |
| MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 |
| MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 |
| MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 |
| MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 |
| MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 |
| MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 |
| MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 |
| MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 |
| MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B 0x40 |
| >; |
| }; |
| |
| pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 |
| MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 |
| MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 |
| MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 |
| MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 |
| MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 |
| MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 |
| MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 |
| MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 |
| MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 |
| MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 |
| MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B 0x40 |
| >; |
| }; |
| |
| pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 |
| MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 |
| MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 |
| MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 |
| MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 |
| MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 |
| MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 |
| MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 |
| MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 |
| MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 |
| MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 |
| MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B 0x40 |
| >; |
| }; |
| |
| pinctrl_watchdog_gpio: watchdog-gpio-grp { |
| fsl,pins = < |
| /* WDOG_B# */ |
| MX8MM_IOMUXC_GPIO1_IO02_GPIO1_IO2 0x26 |
| /* WDOG_EN -- ungate WDT RESET# signal propagation */ |
| MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9 0x6 |
| /* WDOG_KICK# / WDI */ |
| MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x26 |
| >; |
| }; |
| }; |
| |
| &pcie_phy { |
| fsl,clkreq-unsupported; /* CLKREQ_B is not connected to suitable input */ |
| fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; |
| fsl,tx-deemph-gen1 = <0x2d>; |
| fsl,tx-deemph-gen2 = <0xf>; |
| clocks = <&pcieclk 0>; |
| status = "okay"; |
| }; |
| |
| &pcie0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pcie0>; |
| reset-gpio = <&gpio1 5 GPIO_ACTIVE_LOW>; |
| clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, |
| <&pcieclk 0>; |
| clock-names = "pcie", "pcie_aux", "pcie_bus"; |
| assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, |
| <&clk IMX8MM_CLK_PCIE1_CTRL>; |
| assigned-clock-rates = <10000000>, <250000000>; |
| assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, |
| <&clk IMX8MM_SYS_PLL2_250M>; |
| status = "okay"; |
| }; |
| |
| &pwm1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_panel_pwm>; |
| /* Disabled by default, unless display board plugged in. */ |
| status = "disabled"; |
| }; |
| |
| &sai5 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sai5>; |
| fsl,sai-mclk-direction-output; |
| /* Input into codec PLL */ |
| assigned-clocks = <&clk IMX8MM_CLK_SAI5>; |
| assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL2_OUT>; |
| assigned-clock-rates = <22579200>; |
| /* Disabled by default, unless display board plugged in. */ |
| status = "disabled"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| uart-has-rtscts; |
| status = "disabled"; |
| }; |
| |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2>; |
| status = "disabled"; |
| }; |
| |
| &uart3 { /* A53 Debug */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart3>; |
| status = "okay"; |
| }; |
| |
| &uart4 { /* M4 Debug */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart4>; |
| /* UART4 is reserved for CM and RDC blocks CA access to UART4. */ |
| status = "disabled"; |
| }; |
| |
| &usbotg1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usb_otg1>; |
| dr_mode = "otg"; |
| status = "okay"; |
| }; |
| |
| &usbotg2 { |
| dr_mode = "host"; |
| status = "okay"; |
| }; |
| |
| &usdhc2 { /* MicroSD */ |
| assigned-clocks = <&clk IMX8MM_CLK_USDHC2_ROOT>; |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc2>; |
| pinctrl-1 = <&pinctrl_usdhc2_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc2_200mhz>; |
| bus-width = <4>; |
| vmmc-supply = <®_usdhc2_vcc>; |
| status = "okay"; |
| }; |
| |
| &usdhc3 { /* eMMC */ |
| assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; |
| assigned-clock-rates = <400000000>; |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc3>; |
| pinctrl-1 = <&pinctrl_usdhc3_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc3_200mhz>; |
| bus-width = <8>; |
| non-removable; |
| vmmc-supply = <&buck4_reg>; |
| vqmmc-supply = <&buck5_reg>; |
| status = "okay"; |
| }; |
| |
| &wdog1 { |
| status = "okay"; |
| }; |