| menu "Command line interface" |
| |
| config CMDLINE |
| bool "Support U-Boot commands" |
| default y |
| help |
| Enable U-Boot's command-line functions. This provides a means |
| to enter commands into U-Boot for a wide variety of purposes. It |
| also allows scripts (containing commands) to be executed. |
| Various commands and command categorys can be indivdually enabled. |
| Depending on the number of commands enabled, this can add |
| substantially to the size of U-Boot. |
| |
| config HUSH_PARSER |
| bool "Use hush shell" |
| depends on CMDLINE |
| help |
| This option enables the "hush" shell (from Busybox) as command line |
| interpreter, thus enabling powerful command line syntax like |
| if...then...else...fi conditionals or `&&' and '||' |
| constructs ("shell scripts"). |
| |
| If disabled, you get the old, much simpler behaviour with a somewhat |
| smaller memory footprint. |
| |
| config CMDLINE_EDITING |
| bool "Enable command line editing" |
| depends on CMDLINE |
| default y |
| help |
| Enable editing and History functions for interactive command line |
| input operations |
| |
| config AUTO_COMPLETE |
| bool "Enable auto complete using TAB" |
| depends on CMDLINE |
| default y |
| help |
| Enable auto completion of commands using TAB. |
| |
| config SYS_LONGHELP |
| bool "Enable long help messages" |
| depends on CMDLINE |
| default y if CMDLINE |
| help |
| Defined when you want long help messages included |
| Do not set this option when short of memory. |
| |
| config SYS_PROMPT |
| string "Shell prompt" |
| default "Zynq> " if ARCH_ZYNQ |
| default "ZynqMP> " if ARCH_ZYNQMP |
| default "=> " |
| help |
| This string is displayed in the command line to the left of the |
| cursor. |
| |
| config SYS_PROMPT_HUSH_PS2 |
| string "Hush shell secondary prompt" |
| depends on HUSH_PARSER |
| default "> " |
| help |
| This defines the secondary prompt string, which is |
| printed when the command interpreter needs more input |
| to complete a command. Usually "> ". |
| |
| config SYS_XTRACE |
| bool "Command execution tracer" |
| depends on CMDLINE |
| default y if CMDLINE |
| help |
| This option enables the possiblity to print all commands before |
| executing them and after all variables are evaluated (similar |
| to Bash's xtrace/'set -x' feature). |
| To enable the tracer a variable "xtrace" needs to be defined in |
| the environment. |
| |
| config BUILD_BIN2C |
| bool |
| |
| comment "Commands" |
| |
| menu "Info commands" |
| |
| config CMD_ACPI |
| bool "acpi" |
| depends on ACPIGEN |
| default y |
| help |
| List and dump ACPI tables. ACPI (Advanced Configuration and Power |
| Interface) is used mostly on x86 for providing information to the |
| Operating System about devices in the system. The tables are set up |
| by the firmware, typically U-Boot but possibly an earlier firmware |
| module, if U-Boot is chain-loaded from something else. ACPI tables |
| can also include code, to perform hardware-specific tasks required |
| by the Operating Systems. This allows some amount of separation |
| between the firmware and OS, and is particularly useful when you |
| want to make hardware changes without the OS needing to be adjusted. |
| |
| config CMD_ADDRMAP |
| bool "addrmap" |
| depends on ADDR_MAP |
| default y |
| help |
| List non-identity virtual-physical memory mappings for 32-bit CPUs. |
| |
| config CMD_BDI |
| bool "bdinfo" |
| default y |
| help |
| Print board info |
| |
| config CMD_CONFIG |
| bool "config" |
| default SANDBOX |
| select BUILD_BIN2C |
| help |
| Print ".config" contents. |
| |
| If this option is enabled, the ".config" file contents are embedded |
| in the U-Boot image and can be printed on the console by the "config" |
| command. This provides information of which options are enabled on |
| the running U-Boot. |
| |
| config CMD_CONSOLE |
| bool "coninfo" |
| default y |
| help |
| Print console devices and information. |
| |
| config CMD_CPU |
| bool "cpu" |
| depends on CPU |
| help |
| Print information about available CPUs. This normally shows the |
| number of CPUs, type (e.g. manufacturer, architecture, product or |
| internal name) and clock frequency. Other information may be |
| available depending on the CPU driver. |
| |
| config CMD_LICENSE |
| bool "license" |
| select BUILD_BIN2C |
| help |
| Print GPL license text |
| |
| config CMD_PMC |
| bool "pmc" |
| help |
| Provides access to the Intel Power-Management Controller (PMC) so |
| that its state can be examined. This does not currently support |
| changing the state but it is still useful for debugging and seeing |
| what is going on. |
| |
| config CMD_REGINFO |
| bool "reginfo" |
| depends on PPC |
| help |
| Register dump |
| |
| config CMD_TLV_EEPROM |
| bool "tlv_eeprom" |
| depends on I2C_EEPROM |
| help |
| Display and program the system EEPROM data block in ONIE Tlvinfo |
| format. TLV stands for Type-Length-Value. |
| |
| config SPL_CMD_TLV_EEPROM |
| bool "tlv_eeprom for SPL" |
| depends on SPL_I2C_EEPROM |
| select SPL_DRIVERS_MISC |
| help |
| Read system EEPROM data block in ONIE Tlvinfo format from SPL. |
| |
| config CMD_SBI |
| bool "sbi" |
| depends on RISCV_SMODE && SBI_V02 |
| help |
| Display information about the SBI implementation. |
| |
| endmenu |
| |
| menu "Boot commands" |
| |
| config CMD_BOOTD |
| bool "bootd" |
| default y |
| help |
| Run the command stored in the environment "bootcmd", i.e. |
| "bootd" does the same thing as "run bootcmd". |
| |
| config CMD_BOOTM |
| bool "bootm" |
| default y |
| help |
| Boot an application image from the memory. |
| |
| config BOOTM_EFI |
| bool "Support booting UEFI FIT images" |
| depends on CMD_BOOTEFI && CMD_BOOTM && FIT |
| default y |
| help |
| Support booting UEFI FIT images via the bootm command. |
| |
| config CMD_BOOTZ |
| bool "bootz" |
| help |
| Boot the Linux zImage |
| |
| config CMD_BOOTI |
| bool "booti" |
| depends on ARM64 || RISCV |
| default y |
| help |
| Boot an AArch64 Linux Kernel image from memory. |
| |
| config BOOTM_LINUX |
| bool "Support booting Linux OS images" |
| depends on CMD_BOOTM || CMD_BOOTZ || CMD_BOOTI |
| default y |
| help |
| Support booting the Linux kernel directly via a command such as bootm |
| or booti or bootz. |
| |
| config BOOTM_NETBSD |
| bool "Support booting NetBSD (non-EFI) loader images" |
| depends on CMD_BOOTM |
| default y |
| help |
| Support booting NetBSD via the bootm command. |
| |
| config BOOTM_OPENRTOS |
| bool "Support booting OPENRTOS / FreeRTOS images" |
| depends on CMD_BOOTM |
| help |
| Support booting OPENRTOS / FreeRTOS via the bootm command. |
| |
| config BOOTM_OSE |
| bool "Support booting Enea OSE images" |
| depends on (ARM && (ARM64 || CPU_V7A || CPU_V7R) || SANDBOX || PPC || X86) |
| depends on CMD_BOOTM |
| help |
| Support booting Enea OSE images via the bootm command. |
| |
| config BOOTM_PLAN9 |
| bool "Support booting Plan9 OS images" |
| depends on CMD_BOOTM |
| default y |
| help |
| Support booting Plan9 images via the bootm command. |
| |
| config BOOTM_RTEMS |
| bool "Support booting RTEMS OS images" |
| depends on CMD_BOOTM |
| default y |
| help |
| Support booting RTEMS images via the bootm command. |
| |
| config BOOTM_VXWORKS |
| bool "Support booting VxWorks OS images" |
| depends on CMD_BOOTM |
| default y |
| help |
| Support booting VxWorks images via the bootm command. |
| |
| config CMD_BOOTEFI |
| bool "bootefi" |
| depends on EFI_LOADER |
| default y |
| help |
| Boot an EFI image from memory. |
| |
| config CMD_BOOTEFI_HELLO_COMPILE |
| bool "Compile a standard EFI hello world binary for testing" |
| depends on CMD_BOOTEFI && !CPU_V7M |
| default y |
| help |
| This compiles a standard EFI hello world application with U-Boot so |
| that it can be used with the test/py testing framework. This is useful |
| for testing that EFI is working at a basic level, and for bringing |
| up EFI support on a new architecture. |
| |
| No additional space will be required in the resulting U-Boot binary |
| when this option is enabled. |
| |
| config CMD_BOOTEFI_HELLO |
| bool "Allow booting a standard EFI hello world for testing" |
| depends on CMD_BOOTEFI_HELLO_COMPILE |
| default y if CMD_BOOTEFI_SELFTEST |
| help |
| This adds a standard EFI hello world application to U-Boot so that |
| it can be used with the 'bootefi hello' command. This is useful |
| for testing that EFI is working at a basic level, and for bringing |
| up EFI support on a new architecture. |
| |
| source lib/efi_selftest/Kconfig |
| |
| config CMD_BOOTMENU |
| bool "bootmenu" |
| select MENU |
| help |
| Add an ANSI terminal boot menu command. |
| |
| config CMD_ADTIMG |
| bool "adtimg" |
| help |
| Android DTB/DTBO image manipulation commands. Read dtb/dtbo files from |
| image into RAM, dump image structure information, etc. Those dtb/dtbo |
| files should be merged in one dtb further, which needs to be passed to |
| the kernel, as part of a boot process. |
| |
| config CMD_ABOOTIMG |
| bool "abootimg" |
| depends on ANDROID_BOOT_IMAGE |
| help |
| Android Boot Image manipulation commands. Allows one to extract |
| images contained in boot.img, like kernel, ramdisk, dtb, etc, and |
| obtain corresponding meta-information from boot.img. |
| |
| See doc/android/boot-image.rst for details. |
| |
| config CMD_ELF |
| bool "bootelf, bootvx" |
| default y |
| select LIB_ELF |
| help |
| Boot an ELF/vxWorks image from the memory. |
| |
| config CMD_FDT |
| bool "Flattened Device Tree utility commands" |
| default y |
| depends on OF_LIBFDT |
| help |
| Do FDT related setup before booting into the Operating System. |
| |
| config SUPPORT_EXTENSION_SCAN |
| bool |
| |
| config CMD_EXTENSION |
| bool "Extension board management command" |
| select CMD_FDT |
| depends on SUPPORT_EXTENSION_SCAN |
| help |
| Enables the "extension" command, which allows to detect |
| extension boards connected to the system, and apply |
| corresponding Device Tree overlays. |
| |
| config CMD_GO |
| bool "go" |
| default y |
| help |
| Start an application at a given address. |
| |
| config CMD_RUN |
| bool "run" |
| default y |
| help |
| Run the command in the given environment variable. |
| |
| config CMD_IMI |
| bool "iminfo" |
| default y |
| help |
| Print header information for application image. |
| |
| config CMD_IMLS |
| bool "imls" |
| help |
| List all images found in flash |
| |
| config CMD_XIMG |
| bool "imxtract" |
| default y |
| help |
| Extract a part of a multi-image. |
| |
| config CMD_SPL |
| bool "spl export - Export boot information for Falcon boot" |
| depends on SPL |
| help |
| Falcon mode allows booting directly from SPL into an Operating |
| System such as Linux, thus skipping U-Boot proper. See |
| doc/README.falcon for full information about how to use this |
| command. |
| |
| config CMD_SPL_NAND_OFS |
| hex "Offset of OS args or dtb for Falcon-mode NAND boot" |
| depends on CMD_SPL && (TPL_NAND_SUPPORT || SPL_NAND_SUPPORT) |
| default 0 |
| help |
| This provides the offset of the command line arguments for Linux |
| when booting from NAND in Falcon mode. See doc/README.falcon |
| for full information about how to use this option (and also see |
| board/gateworks/gw_ventana/README for an example). |
| |
| config CMD_SPL_NOR_OFS |
| hex "Offset of OS args or dtb for Falcon-mode NOR boot" |
| depends on CMD_SPL && SPL_NOR_SUPPORT |
| default 0 |
| help |
| This provides the offset of the command line arguments or dtb for |
| Linux when booting from NOR in Falcon mode. |
| |
| config CMD_SPL_WRITE_SIZE |
| hex "Size of argument area" |
| depends on CMD_SPL |
| default 0x2000 |
| help |
| This provides the size of the command-line argument area in NAND |
| flash used by Falcon-mode boot. See the documentation until CMD_SPL |
| for detail. |
| |
| config CMD_THOR_DOWNLOAD |
| bool "thor - TIZEN 'thor' download" |
| select DFU |
| help |
| Implements the 'thor' download protocol. This is a way of |
| downloading a software update over USB from an attached host. |
| There is no documentation about this within the U-Boot source code |
| but you should be able to find something on the interwebs. |
| |
| config CMD_ZBOOT |
| bool "zboot - x86 boot command" |
| help |
| With x86 machines it is common to boot a bzImage file which |
| contains both a kernel and a setup.bin file. The latter includes |
| configuration information from the dark ages which x86 boards still |
| need to pick things out of. |
| |
| Consider using FIT in preference to this since it supports directly |
| booting both 32- and 64-bit kernels, as well as secure boot. |
| Documentation is available in doc/uImage.FIT/x86-fit-boot.txt |
| |
| endmenu |
| |
| menu "Environment commands" |
| |
| config CMD_ASKENV |
| bool "ask for env variable" |
| help |
| Ask for environment variable |
| |
| config CMD_EXPORTENV |
| bool "env export" |
| default y |
| help |
| Export environments. |
| |
| config CMD_IMPORTENV |
| bool "env import" |
| default y |
| help |
| Import environments. |
| |
| config CMD_EDITENV |
| bool "editenv" |
| default y |
| help |
| Edit environment variable. |
| |
| config CMD_GREPENV |
| bool "search env" |
| help |
| Allow for searching environment variables |
| |
| config CMD_SAVEENV |
| bool "saveenv" |
| default y |
| help |
| Save all environment variables into the compiled-in persistent |
| storage. |
| |
| config CMD_ERASEENV |
| bool "eraseenv" |
| depends on CMD_SAVEENV |
| help |
| Erase environment variables from the compiled-in persistent |
| storage. |
| |
| config CMD_ENV_EXISTS |
| bool "env exists" |
| default y |
| help |
| Check if a variable is defined in the environment for use in |
| shell scripting. |
| |
| config CMD_ENV_CALLBACK |
| bool "env callbacks - print callbacks and their associated variables" |
| help |
| Some environment variable have callbacks defined by |
| U_BOOT_ENV_CALLBACK. These are called when the variable changes. |
| For example changing "baudrate" adjust the serial baud rate. This |
| command lists the currently defined callbacks. |
| |
| config CMD_ENV_FLAGS |
| bool "env flags -print variables that have non-default flags" |
| help |
| Some environment variables have special flags that control their |
| behaviour. For example, serial# can only be written once and cannot |
| be deleted. This command shows the variables that have special |
| flags. |
| |
| config CMD_NVEDIT_EFI |
| bool "env [set|print] -e - set/print UEFI variables" |
| depends on EFI_LOADER |
| imply HEXDUMP |
| help |
| UEFI variables are encoded as some form of U-Boot variables. |
| If enabled, we are allowed to set/print UEFI variables using |
| "env" command with "-e" option without knowing details. |
| |
| config CMD_NVEDIT_INFO |
| bool "env info - print or evaluate environment information" |
| help |
| Print environment information: |
| - env_valid : is environment valid |
| - env_ready : is environment imported into hash table |
| - env_use_default : is default environment used |
| |
| This command can be optionally used for evaluation in scripts: |
| [-d] : evaluate whether default environment is used |
| [-p] : evaluate whether environment can be persisted |
| [-q] : quiet output |
| The result of multiple evaluations will be combined with AND. |
| |
| config CMD_NVEDIT_LOAD |
| bool "env load" |
| help |
| Load all environment variables from the compiled-in persistent |
| storage. |
| |
| config CMD_NVEDIT_SELECT |
| bool "env select" |
| help |
| Select the compiled-in persistent storage of environment variables. |
| |
| endmenu |
| |
| menu "Memory commands" |
| |
| config CMD_BINOP |
| bool "binop" |
| help |
| Compute binary operations (xor, or, and) of byte arrays of arbitrary |
| size from memory and store the result in memory or the environment. |
| |
| config CMD_BLOBLIST |
| bool "bloblist" |
| default y if BLOBLIST |
| help |
| Show information about the bloblist, a collection of binary blobs |
| held in memory that persist between SPL and U-Boot. In the case of |
| x86 devices the bloblist can be used to hold ACPI tables so that they |
| remain available in memory. |
| |
| config CMD_CRC32 |
| bool "crc32" |
| default y |
| select HASH |
| help |
| Compute CRC32. |
| |
| config CRC32_VERIFY |
| bool "crc32 -v" |
| depends on CMD_CRC32 |
| help |
| Add -v option to verify data against a crc32 checksum. |
| |
| config CMD_EEPROM |
| bool "eeprom - EEPROM subsystem" |
| help |
| (deprecated, needs conversion to driver model) |
| Provides commands to read and write EEPROM (Electrically Erasable |
| Programmable Read Only Memory) chips that are connected over an |
| I2C bus. |
| |
| config CMD_EEPROM_LAYOUT |
| bool "Enable layout-aware eeprom commands" |
| depends on CMD_EEPROM |
| help |
| (deprecated, needs conversion to driver model) |
| When enabled, additional eeprom sub-commands become available. |
| |
| eeprom print - prints the contents of the eeprom in a human-readable |
| way (eeprom layout fields, and data formatted to be fit for human |
| consumption). |
| |
| eeprom update - allows user to update eeprom fields by specifying |
| the field name, and providing the new data in a human readable format |
| (same format as displayed by the eeprom print command). |
| |
| Both commands can either auto detect the layout, or be told which |
| layout to use. |
| |
| Feature API: |
| __weak int parse_layout_version(char *str) |
| - override to provide your own layout name parsing |
| __weak void __eeprom_layout_assign(struct eeprom_layout *layout, |
| int layout_version); |
| - override to setup the layout metadata based on the version |
| __weak int eeprom_layout_detect(unsigned char *data) |
| - override to provide your own algorithm for detecting layout |
| version |
| eeprom_field.c |
| - contains various printing and updating functions for common |
| types of eeprom fields. Can be used for defining |
| custom layouts. |
| |
| config EEPROM_LAYOUT_HELP_STRING |
| string "Tells user what layout names are supported" |
| depends on CMD_EEPROM_LAYOUT |
| default "<not defined>" |
| help |
| Help printed with the LAYOUT VERSIONS part of the 'eeprom' |
| command's help. |
| |
| config SYS_I2C_EEPROM_BUS |
| int "I2C bus of the EEPROM device." |
| depends on CMD_EEPROM |
| default 0 |
| |
| config SYS_I2C_EEPROM_ADDR_LEN |
| int "Length in bytes of the EEPROM memory array address" |
| depends on CMD_EEPROM || ID_EEPROM |
| default 1 |
| range 1 2 |
| help |
| Note: This is NOT the chip address length! |
| |
| config SYS_EEPROM_SIZE |
| depends on CMD_EEPROM |
| int "Size in bytes of the EEPROM device" |
| default 256 |
| |
| config SYS_EEPROM_PAGE_WRITE_BITS |
| int "Number of bits used to address bytes in a single page" |
| depends on CMD_EEPROM |
| default 8 |
| help |
| The EEPROM page size is 2^SYS_EEPROM_PAGE_WRITE_BITS. |
| A 64 byte page, for example would require six bits. |
| |
| config SYS_EEPROM_PAGE_WRITE_DELAY_MS |
| int "Number of milliseconds to delay between page writes" |
| depends on CMD_EEPROM || CMD_I2C |
| default 0 |
| |
| config LOOPW |
| bool "loopw" |
| help |
| Infinite write loop on address range |
| |
| config CMD_MD5SUM |
| bool "md5sum" |
| select MD5 |
| help |
| Compute MD5 checksum. |
| |
| config MD5SUM_VERIFY |
| bool "md5sum -v" |
| depends on CMD_MD5SUM |
| help |
| Add -v option to verify data against an MD5 checksum. |
| |
| config CMD_MEMINFO |
| bool "meminfo" |
| help |
| Display memory information. |
| |
| config CMD_MEMORY |
| bool "md, mm, nm, mw, cp, cmp, base, loop" |
| default y |
| help |
| Memory commands. |
| md - memory display |
| mm - memory modify (auto-incrementing address) |
| nm - memory modify (constant address) |
| mw - memory write (fill) |
| cp - memory copy |
| cmp - memory compare |
| base - print or set address offset |
| loop - initialize loop on address range |
| |
| config CMD_MEM_SEARCH |
| bool "ms - Memory search" |
| help |
| Memory-search command |
| |
| This allows searching through a region of memory looking for hex |
| data (byte, 16-bit word, 32-bit long, also 64-bit on machines that |
| support it). It is also possible to search for a string. The |
| command accepts a memory range and a list of values to search for. |
| The values need to appear in memory in the same order they are given |
| in the command. At most 10 matches can be returned at a time, but |
| pressing return will show the next 10 matches. Environment variables |
| are set for use with scripting (memmatches, memaddr, mempos). |
| |
| config CMD_MX_CYCLIC |
| bool "Enable cyclic md/mw commands" |
| depends on CMD_MEMORY |
| help |
| Add the "mdc" and "mwc" memory commands. These are cyclic |
| "md/mw" commands. |
| Examples: |
| |
| => mdc.b 10 4 500 |
| This command will print 4 bytes (10,11,12,13) each 500 ms. |
| |
| => mwc.l 100 12345678 10 |
| This command will write 12345678 to address 100 all 10 ms. |
| |
| config CMD_RANDOM |
| bool "random" |
| default y |
| depends on CMD_MEMORY && (LIB_RAND || LIB_HW_RAND) |
| help |
| random - fill memory with random data |
| |
| config CMD_MEMTEST |
| bool "memtest" |
| help |
| Simple RAM read/write test. |
| |
| if CMD_MEMTEST |
| |
| config SYS_ALT_MEMTEST |
| bool "Alternative test" |
| help |
| Use a more complete alternative memory test. |
| |
| if SYS_ALT_MEMTEST |
| |
| config SYS_ALT_MEMTEST_BITFLIP |
| bool "Bitflip test" |
| default y |
| help |
| The alternative memory test includes bitflip test since 2020.07. |
| The bitflip test significantly increases the overall test time. |
| Bitflip test can optionally be disabled here. |
| |
| endif |
| |
| config SYS_MEMTEST_START |
| hex "default start address for mtest" |
| default 0x0 |
| help |
| This is the default start address for mtest for simple read/write |
| test. If no arguments are given to mtest, default address is used |
| as start address. |
| |
| config SYS_MEMTEST_END |
| hex "default end address for mtest" |
| default 0x1000 |
| help |
| This is the default end address for mtest for simple read/write |
| test. If no arguments are given to mtest, default address is used |
| as end address. |
| |
| endif |
| |
| config CMD_SHA1SUM |
| bool "sha1sum" |
| select SHA1 |
| help |
| Compute SHA1 checksum. |
| |
| config SHA1SUM_VERIFY |
| bool "sha1sum -v" |
| depends on CMD_SHA1SUM |
| help |
| Add -v option to verify data against a SHA1 checksum. |
| |
| config CMD_STRINGS |
| bool "strings - display strings in memory" |
| help |
| This works similarly to the Unix 'strings' command except that it |
| works with a memory range. String of printable characters found |
| within the range are displayed. The minimum number of characters |
| for a sequence to be considered a string can be provided. |
| |
| endmenu |
| |
| menu "Compression commands" |
| |
| config CMD_LZMADEC |
| bool "lzmadec" |
| default y if CMD_BOOTI |
| select LZMA |
| help |
| Support decompressing an LZMA (Lempel-Ziv-Markov chain algorithm) |
| image from memory. |
| |
| config CMD_UNLZ4 |
| bool "unlz4" |
| default y if CMD_BOOTI |
| select LZ4 |
| help |
| Support decompressing an LZ4 image from memory region. |
| |
| config CMD_UNZIP |
| bool "unzip" |
| default y if CMD_BOOTI |
| select GZIP |
| help |
| Uncompress a zip-compressed memory region. |
| |
| config CMD_ZIP |
| bool "zip" |
| select GZIP_COMPRESSED |
| help |
| Compress a memory region with zlib deflate method. |
| |
| endmenu |
| |
| menu "Device access commands" |
| |
| config CMD_ARMFLASH |
| #depends on FLASH_CFI_DRIVER |
| bool "armflash" |
| help |
| ARM Ltd reference designs flash partition access |
| |
| config CMD_ADC |
| bool "adc - Access Analog to Digital Converters info and data" |
| select ADC |
| depends on DM_REGULATOR |
| help |
| Shows ADC device info and permit printing one-shot analog converted |
| data from a named Analog to Digital Converter. |
| |
| config CMD_BCB |
| bool "bcb" |
| depends on MMC |
| depends on PARTITIONS |
| help |
| Read/modify/write the fields of Bootloader Control Block, usually |
| stored on the flash "misc" partition with its structure defined in: |
| https://android.googlesource.com/platform/bootable/recovery/+/master/ |
| bootloader_message/include/bootloader_message/bootloader_message.h |
| |
| Some real-life use-cases include (but are not limited to): |
| - Determine the "boot reason" (and act accordingly): |
| https://source.android.com/devices/bootloader/boot-reason |
| - Get/pass a list of commands from/to recovery: |
| https://android.googlesource.com/platform/bootable/recovery |
| - Inspect/dump the contents of the BCB fields |
| |
| config CMD_BIND |
| bool "bind/unbind - Bind or unbind a device to/from a driver" |
| depends on DM |
| help |
| Bind or unbind a device to/from a driver from the command line. |
| This is useful in situations where a device may be handled by several |
| drivers. For example, this can be used to bind a UDC to the usb ether |
| gadget driver from the command line. |
| |
| config CMD_CLK |
| bool "clk - Show clock frequencies" |
| help |
| (deprecated) |
| Shows clock frequences by calling a sock_clk_dump() hook function. |
| This is depreated in favour of using the CLK uclass and accessing |
| clock values from associated drivers. However currently no command |
| exists for this. |
| |
| config CMD_DEMO |
| bool "demo - Demonstration commands for driver model" |
| depends on DM |
| help |
| Provides a 'demo' command which can be used to play around with |
| driver model. To use this properly you will need to enable one or |
| both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE). |
| Otherwise you will always get an empty list of devices. The demo |
| devices are defined in the sandbox device tree, so the easiest |
| option is to use sandbox and pass the -d point to sandbox's |
| u-boot.dtb file. |
| |
| config CMD_DFU |
| bool "dfu" |
| select DFU |
| help |
| Enables the command "dfu" which is used to have U-Boot create a DFU |
| class device via USB. This command requires that the "dfu_alt_info" |
| environment variable be set and define the alt settings to expose to |
| the host. |
| |
| config CMD_DM |
| bool "dm - Access to driver model information" |
| depends on DM |
| help |
| Provides access to driver model data structures and information, |
| such as a list of devices, list of uclasses and the state of each |
| device (e.g. activated). This is not required for operation, but |
| can be useful to see the state of driver model for debugging or |
| interest. |
| |
| config CMD_FASTBOOT |
| bool "fastboot - Android fastboot support" |
| depends on FASTBOOT |
| help |
| This enables the command "fastboot" which enables the Android |
| fastboot mode for the platform. Fastboot is a protocol for |
| downloading images, flashing and device control used on |
| Android devices. Fastboot requires either the network stack |
| enabled or support for acting as a USB device. |
| |
| See doc/android/fastboot.rst for more information. |
| |
| config CMD_FLASH |
| bool "flinfo, erase, protect" |
| default y |
| depends on MTD || FLASH_CFI_DRIVER || MTD_NOR_FLASH |
| help |
| NOR flash support. |
| flinfo - print FLASH memory information |
| erase - FLASH memory |
| protect - enable or disable FLASH write protection |
| |
| config CMD_FPGA |
| bool "fpga" |
| depends on FPGA |
| default y |
| help |
| FPGA support. |
| |
| config CMD_FPGA_LOADBP |
| bool "fpga loadbp - load partial bitstream (Xilinx only)" |
| depends on CMD_FPGA |
| help |
| Supports loading an FPGA device from a bitstream buffer containing |
| a partial bitstream. |
| |
| config CMD_FPGA_LOADFS |
| bool "fpga loadfs - load bitstream from FAT filesystem (Xilinx only)" |
| depends on CMD_FPGA |
| help |
| Supports loading an FPGA device from a FAT filesystem. |
| |
| config CMD_FPGA_LOADMK |
| bool "fpga loadmk - load bitstream from image" |
| depends on CMD_FPGA |
| help |
| Supports loading an FPGA device from a image generated by mkimage. |
| |
| config CMD_FPGA_LOADP |
| bool "fpga loadp - load partial bitstream" |
| depends on CMD_FPGA |
| help |
| Supports loading an FPGA device from a bitstream buffer containing |
| a partial bitstream. |
| |
| config CMD_FPGA_LOAD_SECURE |
| bool "fpga loads - loads secure bitstreams (Xilinx only)" |
| depends on CMD_FPGA |
| help |
| Enables the fpga loads command which is used to load secure |
| (authenticated or encrypted or both) bitstreams on to FPGA. |
| |
| config CMD_FPGAD |
| bool "fpgad - dump FPGA registers" |
| help |
| (legacy, needs conversion to driver model) |
| Provides a way to dump FPGA registers by calling the board-specific |
| fpga_get_reg() function. This functions similarly to the 'md' |
| command. |
| |
| config CMD_FUSE |
| bool "fuse - support for the fuse subssystem" |
| help |
| (deprecated - needs conversion to driver model) |
| This allows reading, sensing, programming or overriding fuses |
| which control the behaviour of the device. The command uses the |
| fuse_...() API. |
| |
| config CMD_GPIO |
| bool "gpio" |
| help |
| GPIO support. |
| |
| config CMD_PWM |
| bool "pwm" |
| depends on DM_PWM |
| help |
| Control PWM channels, this allows invert/config/enable/disable PWM channels. |
| |
| config CMD_GPT |
| bool "GPT (GUID Partition Table) command" |
| select EFI_PARTITION |
| select HAVE_BLOCK_DEVICE |
| select PARTITION_UUIDS |
| imply RANDOM_UUID |
| help |
| Enable the 'gpt' command to ready and write GPT style partition |
| tables. |
| |
| config RANDOM_UUID |
| bool "GPT Random UUID generation" |
| select LIB_UUID |
| help |
| Enable the generation of partitions with random UUIDs if none |
| are provided. |
| |
| config CMD_GPT_RENAME |
| bool "GPT partition renaming commands" |
| depends on CMD_GPT |
| help |
| Enables the 'gpt' command to interchange names on two GPT |
| partitions via the 'gpt swap' command or to rename single |
| partitions via the 'rename' command. |
| |
| config CMD_IDE |
| bool "ide - Support for IDE drivers" |
| select IDE |
| help |
| Provides an 'ide' command which allows accessing the IDE drive, |
| resetting the IDE interface, printing the partition table and |
| geting device info. It also enables the 'diskboot' command which |
| permits booting from an IDE drive. |
| |
| config CMD_IO |
| bool "io - Support for performing I/O accesses" |
| help |
| Provides an 'iod' command to display I/O space and an 'iow' command |
| to write values to the I/O space. This can be useful for manually |
| checking the state of devices during boot when debugging device |
| drivers, etc. |
| |
| config CMD_IOTRACE |
| bool "iotrace - Support for tracing I/O activity" |
| help |
| Provides an 'iotrace' command which supports recording I/O reads and |
| writes in a trace buffer in memory . It also maintains a checksum |
| of the trace records (even if space is exhausted) so that the |
| sequence of I/O accesses can be verified. |
| |
| When debugging drivers it is useful to see what I/O accesses were |
| done and in what order. |
| |
| Even if the individual accesses are of little interest it can be |
| useful to verify that the access pattern is consistent each time |
| an operation is performed. In this case a checksum can be used to |
| characterise the operation of a driver. The checksum can be compared |
| across different runs of the operation to verify that the driver is |
| working properly. |
| |
| In particular, when performing major refactoring of the driver, where |
| the access pattern should not change, the checksum provides assurance |
| that the refactoring work has not broken the driver. |
| |
| This works by sneaking into the io.h heder for an architecture and |
| redirecting I/O accesses through iotrace's tracing mechanism. |
| |
| For now no commands are provided to examine the trace buffer. The |
| format is fairly simple, so 'md' is a reasonable substitute. |
| |
| Note: The checksum feature is only useful for I/O regions where the |
| contents do not change outside of software control. Where this is not |
| suitable you can fall back to manually comparing the addresses. It |
| might be useful to enhance tracing to only checksum the accesses and |
| not the data read/written. |
| |
| config CMD_I2C |
| bool "i2c" |
| help |
| I2C support. |
| |
| config CMD_W1 |
| depends on W1 |
| default y if W1 |
| bool "w1 - Support for Dallas 1-Wire protocol" |
| help |
| Dallas 1-wire protocol support |
| |
| config CMD_LOADB |
| bool "loadb" |
| default y |
| help |
| Load a binary file over serial line. |
| |
| config CMD_LOADS |
| bool "loads" |
| default y |
| help |
| Load an S-Record file over serial line |
| |
| config CMD_LSBLK |
| depends on BLK |
| bool "lsblk - list block drivers and devices" |
| help |
| Print list of available block device drivers, and for each, the list |
| of known block devices. |
| |
| config CMD_MBR |
| bool "MBR (Master Boot Record) command" |
| select DOS_PARTITION |
| select HAVE_BLOCK_DEVICE |
| help |
| Enable the 'mbr' command to ready and write MBR (Master Boot Record) |
| style partition tables. |
| |
| config CMD_MISC |
| bool "misc" |
| depends on MISC |
| help |
| Enable the command "misc" for accessing miscellaneous devices with |
| a MISC uclass driver. The command provides listing all MISC devices |
| as well as read and write functionalities via their drivers. |
| |
| config CMD_MMC |
| bool "mmc" |
| depends on MMC |
| help |
| MMC memory mapped support. |
| |
| if CMD_MMC |
| |
| config CMD_BKOPS_ENABLE |
| bool "mmc bkops enable" |
| depends on CMD_MMC |
| help |
| Enable command for setting manual background operations handshake |
| on a eMMC device. The feature is optionally available on eMMC devices |
| conforming to standard >= 4.41. |
| |
| config CMD_MMC_RPMB |
| bool "Enable support for RPMB in the mmc command" |
| depends on SUPPORT_EMMC_RPMB |
| help |
| Enable the commands for reading, writing and programming the |
| key for the Replay Protection Memory Block partition in eMMC. |
| |
| config CMD_MMC_SWRITE |
| bool "mmc swrite" |
| depends on MMC_WRITE |
| select IMAGE_SPARSE |
| help |
| Enable support for the "mmc swrite" command to write Android sparse |
| images to eMMC. |
| |
| endif |
| |
| config CMD_CLONE |
| bool "clone" |
| depends on BLK |
| help |
| Enable storage cloning over block devices, useful for |
| initial flashing by external block device without network |
| or usb support. |
| |
| config CMD_OPTEE_RPMB |
| bool "Enable read/write support on RPMB via OPTEE" |
| depends on SUPPORT_EMMC_RPMB && OPTEE |
| help |
| Enable the commands for reading, writing persistent named values |
| in the Replay Protection Memory Block partition in eMMC by |
| using Persistent Objects in OPTEE |
| |
| config CMD_MTD |
| bool "mtd" |
| depends on MTD |
| select MTD_PARTITIONS |
| help |
| MTD commands support. |
| |
| config CMD_MUX |
| bool "mux" |
| depends on MULTIPLEXER |
| help |
| List, select, and deselect mux controllers on the fly. |
| |
| config CMD_NAND |
| bool "nand" |
| default y if NAND_SUNXI |
| depends on MTD_RAW_NAND |
| help |
| NAND support. |
| |
| if CMD_NAND |
| config CMD_NAND_TRIMFFS |
| bool "nand write.trimffs" |
| default y if ARCH_SUNXI |
| help |
| Allows one to skip empty pages when flashing something on a NAND. |
| |
| config CMD_NAND_LOCK_UNLOCK |
| bool "nand lock/unlock" |
| help |
| NAND locking support. |
| |
| config CMD_NAND_TORTURE |
| bool "nand torture" |
| help |
| NAND torture support. |
| |
| endif # CMD_NAND |
| |
| config CMD_NVME |
| bool "nvme" |
| depends on NVME |
| default y if NVME |
| help |
| NVM Express device support |
| |
| config CMD_ONENAND |
| bool "onenand - access to onenand device" |
| depends on MTD |
| help |
| OneNAND is a brand of NAND ('Not AND' gate) flash which provides |
| various useful features. This command allows reading, writing, |
| and erasing blocks. It allso provides a way to show and change |
| bad blocks, and test the device. |
| |
| config CMD_OSD |
| bool "osd" |
| help |
| Enable the 'osd' command which allows to query information from and |
| write text data to a on-screen display (OSD) device; a virtual device |
| associated with a display capable of displaying a text overlay on the |
| display it's associated with.. |
| |
| config CMD_PART |
| bool "part" |
| select HAVE_BLOCK_DEVICE |
| select PARTITION_UUIDS |
| help |
| Read and display information about the partition table on |
| various media. |
| |
| config CMD_PCI |
| bool "pci - Access PCI devices" |
| help |
| Provide access to PCI (Peripheral Interconnect Bus), a type of bus |
| used on some devices to allow the CPU to communicate with its |
| peripherals. Sub-commands allow bus enumeration, displaying and |
| changing configuration space and a few other features. |
| |
| config CMD_PINMUX |
| bool "pinmux - show pins muxing" |
| depends on PINCTRL |
| default y if PINCTRL |
| help |
| Parse all available pin-controllers and show pins muxing. This |
| is useful for debug purpoer to check the pin muxing and to know if |
| a pin is configured as a GPIO or as an alternate function. |
| |
| config CMD_POWEROFF |
| bool "poweroff" |
| help |
| Poweroff/Shutdown the system |
| |
| config CMD_READ |
| bool "read - Read binary data from a partition" |
| help |
| Provides low-level access to the data in a partition. |
| |
| config CMD_REMOTEPROC |
| bool "remoteproc" |
| depends on REMOTEPROC |
| help |
| Support for Remote Processor control |
| |
| config CMD_SATA |
| bool "sata - Access SATA subsystem" |
| select SATA |
| help |
| SATA (Serial Advanced Technology Attachment) is a serial bus |
| standard for connecting to hard drives and other storage devices. |
| This command provides information about attached devices and allows |
| reading, writing and other operations. |
| |
| SATA replaces PATA (originally just ATA), which stands for Parallel AT |
| Attachment, where AT refers to an IBM AT (Advanced Technology) |
| computer released in 1984. |
| |
| config CMD_SAVES |
| bool "saves - Save a file over serial in S-Record format" |
| help |
| Provides a way to save a binary file using the Motorola S-Record |
| format over the serial line. |
| |
| config CMD_SCSI |
| bool "scsi - Access to SCSI devices" |
| default y if SCSI |
| help |
| This provides a 'scsi' command which provides access to SCSI (Small |
| Computer System Interface) devices. The command provides a way to |
| scan the bus, reset the bus, read and write data and get information |
| about devices. |
| |
| config CMD_SDRAM |
| bool "sdram - Print SDRAM configuration information" |
| help |
| Provides information about attached SDRAM. This assumed that the |
| SDRAM has an EEPROM with information that can be read using the |
| I2C bus. This is only available on some boards. |
| |
| config CMD_SF |
| bool "sf" |
| depends on DM_SPI_FLASH || SPI_FLASH |
| default y if DM_SPI_FLASH |
| help |
| SPI Flash support |
| |
| config CMD_SF_TEST |
| bool "sf test - Allow testing of SPI flash" |
| depends on CMD_SF |
| help |
| Provides a way to test that SPI flash is working correctly. The |
| test is destructive, in that an area of SPI flash must be provided |
| for the test to use. Performance information is also provided, |
| measuring the performance of reading, writing and erasing in |
| Mbps (Million Bits Per Second). This value should approximately |
| equal the SPI bus speed for a single-bit-wide SPI bus, assuming |
| everything is working properly. |
| |
| config CMD_SPI |
| bool "sspi - Command to access spi device" |
| depends on SPI |
| help |
| SPI utility command. |
| |
| config DEFAULT_SPI_BUS |
| int "default spi bus used by sspi command" |
| depends on CMD_SPI |
| default 0 |
| |
| config DEFAULT_SPI_MODE |
| hex "default spi mode used by sspi command (see include/spi.h)" |
| depends on CMD_SPI |
| default 0 |
| |
| config CMD_TSI148 |
| bool "tsi148 - Command to access tsi148 device" |
| help |
| This provides various sub-commands to initialise and configure the |
| Turndra tsi148 device. See the command help for full details. |
| |
| config CMD_UFS |
| bool "Enable UFS - Universal Flash Subsystem commands" |
| depends on UFS |
| help |
| "This provides commands to initialise and configure universal flash |
| subsystem devices" |
| |
| config CMD_UNIVERSE |
| bool "universe - Command to set up the Turndra Universe controller" |
| help |
| This allows setting up the VMEbus provided by this controller. |
| See the command help for full details. |
| |
| config CMD_USB |
| bool "usb" |
| depends on USB_HOST |
| select HAVE_BLOCK_DEVICE |
| help |
| USB support. |
| |
| config CMD_USB_SDP |
| bool "sdp" |
| select USB_FUNCTION_SDP |
| help |
| Enables the command "sdp" which is used to have U-Boot emulating the |
| Serial Download Protocol (SDP) via USB. |
| |
| config CMD_ROCKUSB |
| bool "rockusb" |
| depends on USB_FUNCTION_ROCKUSB |
| help |
| Rockusb protocol is widely used by Rockchip SoC based devices. It can |
| read/write info, image to/from devices. This enable rockusb command |
| support to communication with rockusb device. for more detail about |
| this command, please read doc/README.rockusb. |
| |
| config CMD_USB_MASS_STORAGE |
| bool "UMS usb mass storage" |
| depends on USB_GADGET_DOWNLOAD |
| select USB_FUNCTION_MASS_STORAGE |
| depends on BLK && USB_GADGET |
| help |
| Enables the command "ums" and the USB mass storage support to the |
| export a block device: U-Boot, the USB device, acts as a simple |
| external hard drive plugged on the host USB port. |
| |
| config CMD_PVBLOCK |
| bool "Xen para-virtualized block device" |
| depends on XEN |
| select PVBLOCK |
| help |
| Xen para-virtualized block device support |
| |
| config CMD_VIRTIO |
| bool "virtio" |
| depends on VIRTIO |
| depends on HAVE_BLOCK_DEVICE |
| default y if VIRTIO |
| help |
| VirtIO block device support |
| |
| config CMD_WDT |
| bool "wdt" |
| depends on WDT |
| help |
| This provides commands to control the watchdog timer devices. |
| |
| config CMD_AXI |
| bool "axi" |
| depends on AXI |
| help |
| Enable the command "axi" for accessing AXI (Advanced eXtensible |
| Interface) busses, a on-chip interconnect specification for managing |
| functional blocks in SoC designs, which is also often used in designs |
| involving FPGAs (e.g. communication with IP cores in Xilinx FPGAs). |
| endmenu |
| |
| |
| menu "Shell scripting commands" |
| |
| config CMD_ECHO |
| bool "echo" |
| default y |
| help |
| Echo args to console |
| |
| config CMD_ITEST |
| bool "itest" |
| default y |
| help |
| Return true/false on integer compare. |
| |
| config CMD_SOURCE |
| bool "source" |
| default y |
| help |
| Run script from memory |
| |
| config CMD_SETEXPR |
| bool "setexpr" |
| default y |
| help |
| Evaluate boolean and math expressions and store the result in an env |
| variable. |
| Also supports loading the value at a memory location into a variable. |
| If CONFIG_REGEX is enabled, setexpr also supports a gsub function. |
| |
| config CMD_SETEXPR_FMT |
| bool "setexpr_fmt" |
| depends on CMD_SETEXPR |
| help |
| Evaluate format string expression and store result in an environment |
| variable. |
| |
| endmenu |
| |
| menu "Android support commands" |
| |
| config CMD_AB_SELECT |
| bool "ab_select" |
| depends on ANDROID_AB |
| help |
| On Android devices with more than one boot slot (multiple copies of |
| the kernel and system images) this provides a command to select which |
| slot should be used to boot from and register the boot attempt. This |
| is used by the new A/B update model where one slot is updated in the |
| background while running from the other slot. |
| |
| endmenu |
| |
| if NET |
| |
| menuconfig CMD_NET |
| bool "Network commands" |
| default y |
| imply NETDEVICES |
| |
| if CMD_NET |
| |
| config CMD_BOOTP |
| bool "bootp" |
| default y |
| help |
| bootp - boot image via network using BOOTP/TFTP protocol |
| |
| config CMD_DHCP |
| bool "dhcp" |
| depends on CMD_BOOTP |
| help |
| Boot image via network using DHCP/TFTP protocol |
| |
| config BOOTP_MAY_FAIL |
| bool "Allow for the BOOTP/DHCP server to not be found" |
| depends on CMD_BOOTP |
| help |
| If the DHCP server is not found after the configured retry count, the |
| call will fail instead of starting over. This can be used to fail |
| over to Link-local IP address configuration if the DHCP server is not |
| available. |
| |
| config BOOTP_BOOTPATH |
| bool "Request & store 'rootpath' from BOOTP/DHCP server" |
| default y |
| depends on CMD_BOOTP |
| help |
| Even though the config is called BOOTP_BOOTPATH, it stores the |
| path in the variable 'rootpath'. |
| |
| config BOOTP_VENDOREX |
| bool "Support vendor extensions from BOOTP/DHCP server" |
| depends on CMD_BOOTP |
| |
| config BOOTP_BOOTFILESIZE |
| bool "Request & store 'bootfilesize' from BOOTP/DHCP server" |
| depends on CMD_BOOTP |
| |
| config BOOTP_DNS |
| bool "Request & store 'dnsip' from BOOTP/DHCP server" |
| default y |
| depends on CMD_BOOTP |
| help |
| The primary DNS server is stored as 'dnsip'. If two servers are |
| returned, you must set BOOTP_DNS2 to store that second server IP |
| also. |
| |
| config BOOTP_DNS2 |
| bool "Store 'dnsip2' from BOOTP/DHCP server" |
| depends on BOOTP_DNS |
| help |
| If a DHCP client requests the DNS server IP from a DHCP server, |
| it is possible that more than one DNS serverip is offered to the |
| client. If CONFIG_BOOTP_DNS2 is enabled, the secondary DNS |
| server IP will be stored in the additional environment |
| variable "dnsip2". The first DNS serverip is always |
| stored in the variable "dnsip", when BOOTP_DNS is defined. |
| |
| config BOOTP_GATEWAY |
| bool "Request & store 'gatewayip' from BOOTP/DHCP server" |
| default y |
| depends on CMD_BOOTP |
| |
| config BOOTP_HOSTNAME |
| bool "Request & store 'hostname' from BOOTP/DHCP server" |
| default y |
| depends on CMD_BOOTP |
| help |
| The name may or may not be qualified with the local domain name. |
| |
| config BOOTP_PREFER_SERVERIP |
| bool "serverip variable takes precedent over DHCP server IP." |
| depends on CMD_BOOTP |
| help |
| By default a BOOTP/DHCP reply will overwrite the 'serverip' variable. |
| |
| With this option enabled, the 'serverip' variable in the environment |
| takes precedence over DHCP server IP and will only be set by the DHCP |
| server if not already set in the environment. |
| |
| config BOOTP_SUBNETMASK |
| bool "Request & store 'netmask' from BOOTP/DHCP server" |
| default y |
| depends on CMD_BOOTP |
| |
| config BOOTP_NISDOMAIN |
| bool "Request & store 'nisdomain' from BOOTP/DHCP server" |
| depends on CMD_BOOTP |
| |
| config BOOTP_NTPSERVER |
| bool "Request & store 'ntpserverip' from BOOTP/DHCP server" |
| depends on CMD_BOOTP |
| |
| config BOOTP_TIMEOFFSET |
| bool "Request & store 'timeoffset' from BOOTP/DHCP server" |
| depends on CMD_BOOTP && CMD_SNTP |
| |
| config CMD_PCAP |
| bool "pcap capture" |
| help |
| Selecting this will allow capturing all Ethernet packets and store |
| them in physical memory in a PCAP formated file, |
| later to be analyzed by PCAP reader application (IE. WireShark). |
| |
| config BOOTP_PXE |
| bool "Send PXE client arch to BOOTP/DHCP server" |
| default y |
| depends on CMD_BOOTP && CMD_PXE |
| help |
| Supported for ARM, ARM64, and x86 for now. |
| |
| config BOOTP_PXE_CLIENTARCH |
| hex |
| depends on BOOTP_PXE |
| default 0x16 if ARM64 |
| default 0x15 if ARM |
| default 0 if X86 |
| |
| config BOOTP_VCI_STRING |
| string |
| depends on CMD_BOOTP |
| default "U-Boot.armv7" if CPU_V7A || CPU_V7M || CPU_V7R |
| default "U-Boot.armv8" if ARM64 |
| default "U-Boot.arm" if ARM |
| default "U-Boot" |
| |
| config CMD_TFTPBOOT |
| bool "tftpboot" |
| default y |
| help |
| tftpboot - boot image via network using TFTP protocol |
| |
| config CMD_TFTPPUT |
| bool "tftp put" |
| depends on CMD_TFTPBOOT |
| help |
| TFTP put command, for uploading files to a server |
| |
| config CMD_TFTPSRV |
| bool "tftpsrv" |
| depends on CMD_TFTPBOOT |
| help |
| Act as a TFTP server and boot the first received file |
| |
| config NET_TFTP_VARS |
| bool "Control TFTP timeout and count through environment" |
| depends on CMD_TFTPBOOT |
| default y |
| help |
| If set, allows controlling the TFTP timeout through the |
| environment variable tftptimeout, and the TFTP maximum |
| timeout count through the variable tftptimeoutcountmax. |
| If unset, timeout and maximum are hard-defined as 1 second |
| and 10 timouts per TFTP transfer. |
| |
| config CMD_RARP |
| bool "rarpboot" |
| help |
| Boot image via network using RARP/TFTP protocol |
| |
| config CMD_NFS |
| bool "nfs" |
| default y |
| help |
| Boot image via network using NFS protocol. |
| |
| config CMD_MII |
| bool "mii" |
| imply CMD_MDIO |
| help |
| If set, allows 802.3(clause 22) MII Management functions interface access |
| The management interface specified in Clause 22 provides |
| a simple, two signal, serial interface to connect a |
| Station Management entity and a managed PHY for providing access |
| to management parameters and services. |
| The interface is referred to as the MII management interface. |
| |
| config CMD_MDIO |
| bool "mdio" |
| depends on PHYLIB |
| help |
| If set, allows Enable 802.3(clause 45) MDIO interface registers access |
| The MDIO interface is orthogonal to the MII interface and extends |
| it by adding access to more registers through indirect addressing. |
| |
| config CMD_PING |
| bool "ping" |
| help |
| Send ICMP ECHO_REQUEST to network host |
| |
| config CMD_CDP |
| bool "cdp" |
| help |
| Perform CDP network configuration |
| |
| config CMD_SNTP |
| bool "sntp" |
| select PROT_UDP |
| help |
| Synchronize RTC via network |
| |
| config CMD_DNS |
| bool "dns" |
| help |
| Lookup the IP of a hostname |
| |
| config CMD_LINK_LOCAL |
| bool "linklocal" |
| select LIB_RAND |
| help |
| Acquire a network IP address using the link-local protocol |
| |
| endif |
| |
| config CMD_ETHSW |
| bool "ethsw" |
| help |
| Allow control of L2 Ethernet switch commands. These are supported |
| by the vsc9953 Ethernet driver at present. Sub-commands allow |
| operations such as enabling / disabling a port and |
| viewing/maintaining the filtering database (FDB) |
| |
| config CMD_PXE |
| bool "pxe" |
| select MENU |
| help |
| Boot image via network using PXE protocol |
| |
| config CMD_WOL |
| bool "wol" |
| help |
| Wait for wake-on-lan Magic Packet |
| |
| endif |
| |
| menu "Misc commands" |
| |
| config CMD_BMP |
| bool "Enable 'bmp' command" |
| depends on LCD || DM_VIDEO || VIDEO |
| help |
| This provides a way to obtain information about a BMP-format image |
| and to display it. BMP (which presumably stands for BitMaP) is a |
| file format defined by Microsoft which supports images of various |
| depths, formats and compression methods. Headers on the file |
| determine the formats used. This command can be used by first loading |
| the image into RAM, then using this command to look at it or display |
| it. |
| |
| config CMD_BOOTCOUNT |
| bool "bootcount" |
| depends on BOOTCOUNT_LIMIT |
| help |
| Enable the bootcount command, which allows interrogation and |
| reset of the bootcounter. |
| |
| config CMD_BSP |
| bool "Enable board-specific commands" |
| help |
| (deprecated: instead, please define a Kconfig option for each command) |
| |
| Some boards have board-specific commands which are only enabled |
| during developemnt and need to be turned off for production. This |
| option provides a way to control this. The commands that are enabled |
| vary depending on the board. |
| |
| config CMD_BLOCK_CACHE |
| bool "blkcache - control and stats for block cache" |
| depends on BLOCK_CACHE |
| default y if BLOCK_CACHE |
| help |
| Enable the blkcache command, which can be used to control the |
| operation of the cache functions. |
| This is most useful when fine-tuning the operation of the cache |
| during development, but also allows the cache to be disabled when |
| it might hurt performance (e.g. when using the ums command). |
| |
| config CMD_BUTTON |
| bool "button" |
| depends on BUTTON |
| default y if BUTTON |
| help |
| Enable the 'button' command which allows to get the status of |
| buttons supported by the board. The buttonss can be listed with |
| 'button list' and state can be known with 'button <label>'. |
| Any button drivers can be controlled with this command, e.g. |
| button_gpio. |
| |
| config CMD_CACHE |
| bool "icache or dcache" |
| help |
| Enable the "icache" and "dcache" commands |
| |
| config CMD_CONITRACE |
| bool "conitrace - trace console input codes" |
| help |
| Enable the 'conitrace' command which displays the codes received |
| from the console input as hexadecimal numbers. |
| |
| config CMD_CLS |
| bool "Enable clear screen command 'cls'" |
| depends on CFB_CONSOLE || DM_VIDEO || LCD || VIDEO |
| default y if LCD |
| help |
| Enable the 'cls' command which clears the screen contents |
| on video frame buffer. |
| |
| config CMD_EFIDEBUG |
| bool "efidebug - display/configure UEFI environment" |
| depends on EFI_LOADER |
| select EFI_DEVICE_PATH_TO_TEXT |
| help |
| Enable the 'efidebug' command which provides a subset of UEFI |
| shell utility with simplified functionality. It will be useful |
| particularly for managing boot parameters as well as examining |
| various EFI status for debugging. |
| |
| config CMD_EXCEPTION |
| bool "exception - raise exception" |
| depends on ARM || RISCV || SANDBOX || X86 |
| help |
| Enable the 'exception' command which allows to raise an exception. |
| |
| config CMD_LED |
| bool "led" |
| depends on LED |
| default y if LED |
| help |
| Enable the 'led' command which allows for control of LEDs supported |
| by the board. The LEDs can be listed with 'led list' and controlled |
| with led on/off/togle/blink. Any LED drivers can be controlled with |
| this command, e.g. led_gpio. |
| |
| config CMD_DATE |
| bool "date" |
| default y if DM_RTC |
| select LIB_DATE |
| help |
| Enable the 'date' command for getting/setting the time/date in RTC |
| devices. |
| |
| config CMD_RTC |
| bool "rtc" |
| depends on DM_RTC |
| help |
| Enable the 'rtc' command for low-level access to RTC devices. |
| |
| config CMD_TIME |
| bool "time" |
| help |
| Run commands and summarize execution time. |
| |
| config CMD_GETTIME |
| bool "gettime - read elapsed time" |
| help |
| Enable the 'gettime' command which reads the elapsed time since |
| U-Boot started running. This shows the time in seconds and |
| milliseconds. See also the 'bootstage' command which provides more |
| flexibility for boot timing. |
| |
| config CMD_RNG |
| bool "rng command" |
| depends on DM_RNG |
| select HEXDUMP |
| help |
| Print bytes from the hardware random number generator. |
| |
| config CMD_KASLRSEED |
| bool "kaslrseed" |
| depends on DM_RNG |
| help |
| Set the kaslr-seed in the chosen node with entropy provided by a |
| hardware random number generator. |
| |
| config CMD_SLEEP |
| bool "sleep" |
| default y |
| help |
| Delay execution for some time |
| |
| config CMD_MP |
| bool "support for multiprocessor commands" |
| depends on MP |
| default y |
| help |
| This enables commands to bringup different processors |
| in multiprocessor cases. |
| |
| config CMD_TIMER |
| bool "timer" |
| help |
| Access the system timer. |
| |
| config CMD_SOUND |
| bool "sound" |
| depends on SOUND |
| help |
| This provides basic access to the U-Boot's sound support. The main |
| feature is to play a beep. |
| |
| sound init - set up sound system |
| sound play - play a sound |
| |
| config CMD_SYSBOOT |
| bool "sysboot" |
| select MENU |
| help |
| Boot image via local extlinux.conf file |
| |
| config CMD_QFW |
| bool "qfw" |
| select QFW |
| help |
| This provides access to the QEMU firmware interface. The main |
| feature is to allow easy loading of files passed to qemu-system |
| via -kernel / -initrd |
| |
| config CMD_PSTORE |
| bool "pstore" |
| help |
| This provides access to Linux PStore with Rammoops backend. The main |
| feature is to allow to display or save PStore records. |
| |
| See doc/pstore.rst for more information. |
| |
| if CMD_PSTORE |
| |
| config CMD_PSTORE_MEM_ADDR |
| hex "Memory Address" |
| depends on CMD_PSTORE |
| help |
| Base addr used for PStore ramoops memory, should be identical to |
| ramoops.mem_address parameter used by kernel |
| |
| config CMD_PSTORE_MEM_SIZE |
| hex "Memory size" |
| depends on CMD_PSTORE |
| default "0x10000" |
| help |
| Size of PStore ramoops memory, should be identical to ramoops.mem_size |
| parameter used by kernel, a power of 2 and larger than the sum of the |
| record sizes |
| |
| config CMD_PSTORE_RECORD_SIZE |
| hex "Dump record size" |
| depends on CMD_PSTORE |
| default "0x1000" |
| help |
| Size of each dump done on oops/panic, should be identical to |
| ramoops.record_size parameter used by kernel and a power of 2 |
| Must be non-zero |
| |
| config CMD_PSTORE_CONSOLE_SIZE |
| hex "Kernel console log size" |
| depends on CMD_PSTORE |
| default "0x1000" |
| help |
| Size of kernel console log, should be identical to |
| ramoops.console_size parameter used by kernel and a power of 2 |
| Must be non-zero |
| |
| config CMD_PSTORE_FTRACE_SIZE |
| hex "FTrace log size" |
| depends on CMD_PSTORE |
| default "0x1000" |
| help |
| Size of ftrace log, should be identical to ramoops.ftrace_size |
| parameter used by kernel and a power of 2 |
| |
| config CMD_PSTORE_PMSG_SIZE |
| hex "User space message log size" |
| depends on CMD_PSTORE |
| default "0x1000" |
| help |
| Size of user space message log, should be identical to |
| ramoops.pmsg_size parameter used by kernel and a power of 2 |
| |
| config CMD_PSTORE_ECC_SIZE |
| int "ECC size" |
| depends on CMD_PSTORE |
| default "0" |
| help |
| if non-zero, the option enables ECC support and specifies ECC buffer |
| size in bytes (1 is a special value, means 16 bytes ECC), should be |
| identical to ramoops.ramoops_ecc parameter used by kernel |
| |
| endif |
| |
| source "cmd/mvebu/Kconfig" |
| |
| config CMD_TERMINAL |
| bool "terminal - provides a way to attach a serial terminal" |
| help |
| Provides a 'cu'-like serial terminal command. This can be used to |
| access other serial ports from the system console. The terminal |
| is very simple with no special processing of characters. As with |
| cu, you can press ~. (tilde followed by period) to exit. |
| |
| config CMD_UUID |
| bool "uuid, guid - generation of unique IDs" |
| select LIB_UUID |
| help |
| This enables two commands: |
| |
| uuid - generate random Universally Unique Identifier |
| guid - generate Globally Unique Identifier based on random UUID |
| |
| The two commands are very similar except for the endianness of the |
| output. |
| |
| endmenu |
| |
| source "cmd/ti/Kconfig" |
| |
| config CMD_BOOTSTAGE |
| bool "Enable the 'bootstage' command" |
| depends on BOOTSTAGE |
| help |
| Add a 'bootstage' command which supports printing a report |
| and un/stashing of bootstage data. |
| |
| menu "Power commands" |
| config CMD_PMIC |
| bool "Enable Driver Model PMIC command" |
| depends on DM_PMIC |
| help |
| This is the pmic command, based on a driver model pmic's API. |
| Command features are unchanged: |
| - list - list pmic devices |
| - pmic dev <id> - show or [set] operating pmic device (NEW) |
| - pmic dump - dump registers |
| - pmic read address - read byte of register at address |
| - pmic write address - write byte to register at address |
| The only one change for this command is 'dev' subcommand. |
| |
| config CMD_REGULATOR |
| bool "Enable Driver Model REGULATOR command" |
| depends on DM_REGULATOR |
| help |
| This command is based on driver model regulator's API. |
| User interface features: |
| - list - list regulator devices |
| - regulator dev <id> - show or [set] operating regulator device |
| - regulator info - print constraints info |
| - regulator status - print operating status |
| - regulator value <val] <-f> - print/[set] voltage value [uV] |
| - regulator current <val> - print/[set] current value [uA] |
| - regulator mode <id> - print/[set] operating mode id |
| - regulator enable - enable the regulator output |
| - regulator disable - disable the regulator output |
| |
| The '-f' (force) option can be used for set the value which exceeds |
| the limits, which are found in device-tree and are kept in regulator's |
| uclass plat structure. |
| |
| endmenu |
| |
| menu "Security commands" |
| config CMD_AES |
| bool "Enable the 'aes' command" |
| select AES |
| help |
| This provides a means to encrypt and decrypt data using the AES |
| (Advanced Encryption Standard). This algorithm uses a symetric key |
| and is widely used as a streaming cipher. Different key lengths are |
| supported by the algorithm but this command only supports 128 bits |
| at present. |
| |
| config CMD_BLOB |
| bool "Enable the 'blob' command" |
| depends on !MX6ULL && !MX6SLL && !MX6SL |
| select IMX_HAB if ARCH_MX6 || ARCH_MX7 || ARCH_MX7ULP || ARCH_IMX8M |
| help |
| This is used with the Freescale secure boot mechanism. |
| |
| Freescale's SEC block has built-in Blob Protocol which provides |
| a method for protecting user-defined data across system power |
| cycles. SEC block protects data in a data structure called a Blob, |
| which provides both confidentiality and integrity protection. |
| |
| Encapsulating data as a blob |
| Each time that the Blob Protocol is used to protect data, a |
| different randomly generated key is used to encrypt the data. |
| This random key is itself encrypted using a key which is derived |
| from SoC's non-volatile secret key and a 16 bit Key identifier. |
| The resulting encrypted key along with encrypted data is called a |
| blob. The non-volatile secure key is available for use only during |
| secure boot. |
| |
| During decapsulation, the reverse process is performed to get back |
| the original data. |
| |
| Sub-commands: |
| blob enc - encapsulating data as a cryptgraphic blob |
| blob dec - decapsulating cryptgraphic blob to get the data |
| |
| Syntax: |
| |
| blob enc src dst len km |
| |
| Encapsulate and create blob of data $len bytes long |
| at address $src and store the result at address $dst. |
| $km is the 16 byte key modifier is also required for |
| generation/use as key for cryptographic operation. Key |
| modifier should be 16 byte long. |
| |
| blob dec src dst len km |
| |
| Decapsulate the blob of data at address $src and |
| store result of $len byte at addr $dst. |
| $km is the 16 byte key modifier is also required for |
| generation/use as key for cryptographic operation. Key |
| modifier should be 16 byte long. |
| |
| config CMD_HASH |
| bool "Support 'hash' command" |
| select HASH |
| help |
| This provides a way to hash data in memory using various supported |
| algorithms (such as SHA1, MD5, CRC32). The computed digest can be |
| saved to memory or to an environment variable. It is also possible |
| to verify a hash against data in memory. |
| |
| config CMD_HVC |
| bool "Support the 'hvc' command" |
| depends on ARM_SMCCC |
| help |
| Allows issuing Hypervisor Calls (HVCs). Mostly useful for |
| development and testing. |
| |
| config CMD_SMC |
| bool "Support the 'smc' command" |
| depends on ARM_SMCCC |
| help |
| Allows issuing Secure Monitor Calls (SMCs). Mostly useful for |
| development and testing. |
| |
| config HASH_VERIFY |
| bool "hash -v" |
| depends on CMD_HASH |
| help |
| Add -v option to verify data against a hash. |
| |
| config CMD_SCP03 |
| bool "scp03 - SCP03 enable and rotate/provision operations" |
| depends on SCP03 |
| help |
| This command provides access to a Trusted Application |
| running in a TEE to request Secure Channel Protocol 03 |
| (SCP03) enablement and/or rotation of its SCP03 keys. |
| |
| config CMD_TPM_V1 |
| bool |
| |
| config CMD_TPM_V2 |
| bool |
| |
| config CMD_TPM |
| bool "Enable the 'tpm' command" |
| depends on TPM_V1 || TPM_V2 |
| select CMD_TPM_V1 if TPM_V1 |
| select CMD_TPM_V2 if TPM_V2 |
| help |
| This provides a means to talk to a TPM from the command line. A wide |
| range of commands if provided - see 'tpm help' for details. The |
| command requires a suitable TPM on your board and the correct driver |
| must be enabled. |
| |
| if CMD_TPM |
| |
| config CMD_TPM_TEST |
| bool "Enable the 'tpm test' command" |
| depends on TPM_V1 |
| help |
| This provides a a series of tests to confirm that the TPMv1.x is |
| working correctly. The tests cover initialisation, non-volatile RAM, |
| extend, global lock and checking that timing is within expectations. |
| The tests pass correctly on Infineon TPMs but may need to be adjusted |
| for other devices. |
| |
| endif |
| |
| endmenu |
| |
| menu "Firmware commands" |
| config CMD_CROS_EC |
| bool "Enable crosec command" |
| depends on CROS_EC |
| default y |
| help |
| Enable command-line access to the Chrome OS EC (Embedded |
| Controller). This provides the 'crosec' command which has |
| a number of sub-commands for performing EC tasks such as |
| updating its flash, accessing a small saved context area |
| and talking to the I2C bus behind the EC (if there is one). |
| endmenu |
| |
| menu "Filesystem commands" |
| config CMD_BTRFS |
| bool "Enable the 'btrsubvol' command" |
| select FS_BTRFS |
| help |
| This enables the 'btrsubvol' command to list subvolumes |
| of a BTRFS filesystem. There are no special commands for |
| listing BTRFS directories or loading BTRFS files - this |
| can be done by the generic 'fs' commands (see CMD_FS_GENERIC) |
| when BTRFS is enabled (see FS_BTRFS). |
| |
| config CMD_CBFS |
| bool "Enable the 'cbfs' command" |
| depends on FS_CBFS |
| help |
| Define this to enable support for reading from a Coreboot |
| filesystem. This is a ROM-based filesystem used for accessing files |
| on systems that use coreboot as the first boot-loader and then load |
| U-Boot to actually boot the Operating System. Available commands are |
| cbfsinit, cbfsinfo, cbfsls and cbfsload. |
| |
| config CMD_CRAMFS |
| bool "Enable the 'cramfs' command" |
| depends on FS_CRAMFS |
| help |
| This provides commands for dealing with CRAMFS (Compressed ROM |
| filesystem). CRAMFS is useful when space is tight since files are |
| compressed. Two commands are provided: |
| |
| cramfsls - lists files in a cramfs image |
| cramfsload - loads a file from a cramfs image |
| |
| config CMD_EXT2 |
| bool "ext2 command support" |
| select FS_EXT4 |
| help |
| Enables EXT2 FS command |
| |
| config CMD_EXT4 |
| bool "ext4 command support" |
| select FS_EXT4 |
| help |
| Enables EXT4 FS command |
| |
| config CMD_EXT4_WRITE |
| depends on CMD_EXT4 |
| bool "ext4 write command support" |
| select EXT4_WRITE |
| help |
| Enables EXT4 FS write command |
| |
| config CMD_FAT |
| bool "FAT command support" |
| select FS_FAT |
| help |
| Support for the FAT fs |
| |
| config CMD_SQUASHFS |
| bool "SquashFS command support" |
| select FS_SQUASHFS |
| help |
| Enables SquashFS filesystem commands (e.g. load, ls). |
| |
| config CMD_FS_GENERIC |
| bool "filesystem commands" |
| help |
| Enables filesystem commands (e.g. load, ls) that work for multiple |
| fs types. |
| |
| config CMD_FS_UUID |
| bool "fsuuid command" |
| help |
| Enables fsuuid command for filesystem UUID. |
| |
| config CMD_JFFS2 |
| bool "jffs2 command" |
| select FS_JFFS2 |
| help |
| Enables commands to support the JFFS2 (Journalling Flash File System |
| version 2) filesystem. This enables fsload, ls and fsinfo which |
| provide the ability to load files, list directories and obtain |
| filesystem information. |
| |
| config JFFS2_DEV |
| string "Default device for JFFS2" |
| depends on CMD_JFFS2 |
| default "nor0" |
| help |
| The default device to use with the jffs2 command. |
| |
| config JFFS2_PART_OFFSET |
| hex "Default offset within flash to locate the JFFS2 image" |
| depends on CMD_JFFS2 |
| default 0x0 |
| help |
| The default offset within flash to locate the JFFS2 image. |
| |
| config JFFS2_PART_SIZE |
| hex "Default size of JFFS2 partition" |
| depends on CMD_JFFS2 |
| default 0xFFFFFFFF |
| help |
| The default size of the JFFS2 partition |
| |
| config CMD_MTDPARTS |
| bool "MTD partition support" |
| depends on MTD |
| help |
| MTD partitioning tool support. |
| It is strongly encouraged to avoid using this command |
| anymore along with 'sf', 'nand', 'onenand'. One can still |
| declare the partitions in the mtdparts environment variable |
| but better use the MTD stack and the 'mtd' command instead. |
| |
| config CMD_MTDPARTS_SPREAD |
| bool "Padd partition size to take account of bad blocks" |
| depends on CMD_MTDPARTS |
| help |
| This enables the 'spread' sub-command of the mtdparts command. |
| This command will modify the existing mtdparts variable by increasing |
| the size of the partitions such that 1) each partition's net size is |
| at least as large as the size specified in the mtdparts variable and |
| 2) each partition starts on a good block. |
| |
| config CMD_MTDPARTS_SHOW_NET_SIZES |
| bool "Show net size (w/o bad blocks) of partitions" |
| depends on CMD_MTDPARTS |
| help |
| Adds two columns to the printed partition table showing the |
| effective usable size of a partition, if bad blocks are taken |
| into account. |
| |
| config MTDIDS_DEFAULT |
| string "Default MTD IDs" |
| depends on MTD || SPI_FLASH |
| help |
| Defines a default MTD IDs list for use with MTD partitions in the |
| Linux MTD command line partitions format. |
| |
| config MTDPARTS_DEFAULT |
| string "Default MTD partition scheme" |
| depends on MTD || SPI_FLASH |
| help |
| Defines a default MTD partitioning scheme in the Linux MTD command |
| line partitions format |
| |
| config CMD_REISER |
| bool "reiser - Access to reiserfs filesystems" |
| help |
| This provides two commands which operate on a resierfs filesystem, |
| commonly used some years ago: |
| |
| reiserls - list files |
| reiserload - load a file |
| |
| config CMD_YAFFS2 |
| bool "yaffs2 - Access of YAFFS2 filesystem" |
| depends on YAFFS2 |
| default y |
| help |
| This provides commands for accessing a YAFFS2 filesystem. Yet |
| Another Flash Filesystem 2 is a filesystem designed specifically |
| for NAND flash. It incorporates bad-block management and ensures |
| that device writes are sequential regardless of filesystem |
| activity. |
| |
| config CMD_ZFS |
| bool "zfs - Access of ZFS filesystem" |
| help |
| This provides commands to accessing a ZFS filesystem, commonly used |
| on Solaris systems. Two sub-commands are provided: |
| |
| zfsls - list files in a directory |
| zfsload - load a file |
| |
| See doc/README.zfs for more details. |
| |
| endmenu |
| |
| menu "Debug commands" |
| |
| config CMD_CBSYSINFO |
| bool "cbsysinfo" |
| depends on X86 |
| default y if SYS_COREBOOT |
| help |
| This provides information about the coreboot sysinfo table stored in |
| memory by coreboot before jumping to U-Boot. It can be useful for |
| debugging the beaaviour of coreboot or U-Boot. |
| |
| config CMD_DIAG |
| bool "diag - Board diagnostics" |
| help |
| This command provides access to board diagnostic tests. These are |
| called Power-on Self Tests (POST). The command allows listing of |
| available tests and running either all the tests, or specific tests |
| identified by name. |
| |
| config CMD_IRQ |
| bool "irq - Show information about interrupts" |
| depends on !ARM && !MIPS && !RISCV && !SH |
| help |
| This enables two commands: |
| |
| interrupts - enable or disable interrupts |
| irqinfo - print device-specific interrupt information |
| |
| config CMD_KGDB |
| bool "kgdb - Allow debugging of U-Boot with gdb" |
| depends on PPC |
| help |
| This enables a 'kgdb' command which allows gdb to connect to U-Boot |
| over a serial link for debugging purposes. This allows |
| single-stepping, inspecting variables, etc. This is supported only |
| on PowerPC at present. |
| |
| config CMD_LOG |
| bool "log - Generation, control and access to logging" |
| select LOG |
| select GETOPT |
| help |
| This provides access to logging features. It allows the output of |
| log data to be controlled to a limited extent (setting up the default |
| maximum log level for emitting of records). It also provides access |
| to a command used for testing the log system. |
| |
| config CMD_TRACE |
| bool "trace - Support tracing of function calls and timing" |
| depends on TRACE |
| default y |
| help |
| Enables a command to control using of function tracing within |
| U-Boot. This allows recording of call traces including timing |
| information. The command can write data to memory for exporting |
| for analysis (e.g. using bootchart). See doc/README.trace for full |
| details. |
| |
| config CMD_AVB |
| bool "avb - Android Verified Boot 2.0 operations" |
| depends on AVB_VERIFY |
| help |
| Enables a "avb" command to perform verification of partitions using |
| Android Verified Boot 2.0 functionality. It includes such subcommands: |
| avb init - initialize avb2 subsystem |
| avb read_rb - read rollback index |
| avb write_rb - write rollback index |
| avb is_unlocked - check device lock state |
| avb get_uuid - read and print uuid of a partition |
| avb read_part - read data from partition |
| avb read_part_hex - read data from partition and output to stdout |
| avb write_part - write data to partition |
| avb verify - run full verification chain |
| |
| config CMD_STACKPROTECTOR_TEST |
| bool "Test command for stack protector" |
| depends on STACKPROTECTOR |
| help |
| Enable stackprot_test command |
| The stackprot_test command will force a stack overrun to test |
| the stack smashing detection mechanisms. |
| |
| endmenu |
| |
| config CMD_UBI |
| tristate "Enable UBI - Unsorted block images commands" |
| select MTD_UBI |
| help |
| UBI is a software layer above MTD layer which admits use of LVM-like |
| logical volumes on top of MTD devices, hides some complexities of |
| flash chips like wear and bad blocks and provides some other useful |
| capabilities. Please, consult the MTD web site for more details |
| (www.linux-mtd.infradead.org). Activate this option if you want |
| to use U-Boot UBI commands. |
| It is also strongly encouraged to also enable CONFIG_MTD to get full |
| partition support. |
| |
| config CMD_UBI_RENAME |
| bool "Enable rename" |
| depends on CMD_UBI |
| help |
| Enable a "ubi" command to rename ubi volume: |
| ubi rename <oldname> <newname> |
| |
| config CMD_UBIFS |
| tristate "Enable UBIFS - Unsorted block images filesystem commands" |
| depends on CMD_UBI |
| default y if CMD_UBI |
| select LZO |
| help |
| UBIFS is a file system for flash devices which works on top of UBI. |
| |
| config MMC_SPEED_MODE_SET |
| bool "set speed mode using mmc command" |
| depends on CMD_MMC |
| default n |
| help |
| Enable setting speed mode using mmc rescan and mmc dev commands. |
| The speed mode is provided as the last argument in these commands |
| and is indicated using the index from enum bus_mode in |
| include/mmc.h. A speed mode can be set only if it has already |
| been enabled in the device tree. |
| endmenu |