| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2017, Fuzhou Rockchip Electronics Co., Ltd |
| * Author: Eric Gao <eric.gao@rock-chips.com> |
| */ |
| |
| #include <common.h> |
| #include <clk.h> |
| #include <display.h> |
| #include <dm.h> |
| #include <log.h> |
| #include <panel.h> |
| #include <regmap.h> |
| #include "rk_mipi.h" |
| #include <syscon.h> |
| #include <asm/gpio.h> |
| #include <dm/uclass-internal.h> |
| #include <linux/err.h> |
| #include <linux/kernel.h> |
| #include <asm/arch-rockchip/clock.h> |
| #include <asm/arch-rockchip/cru.h> |
| #include <asm/arch-rockchip/grf_rk3288.h> |
| #include <asm/arch-rockchip/hardware.h> |
| #include <asm/arch-rockchip/rockchip_mipi_dsi.h> |
| |
| #define MHz 1000000 |
| |
| /* Select mipi dsi source, big or little vop */ |
| static int rk_mipi_dsi_source_select(struct udevice *dev) |
| { |
| struct rk_mipi_priv *priv = dev_get_priv(dev); |
| struct rk3288_grf *grf = priv->grf; |
| struct display_plat *disp_uc_plat = dev_get_uclass_plat(dev); |
| |
| /* Select the video source */ |
| switch (disp_uc_plat->source_id) { |
| case VOP_B: |
| rk_clrsetreg(&grf->soc_con6, RK3288_DSI0_LCDC_SEL_MASK, |
| RK3288_DSI0_LCDC_SEL_BIG |
| << RK3288_DSI0_LCDC_SEL_SHIFT); |
| break; |
| case VOP_L: |
| rk_clrsetreg(&grf->soc_con6, RK3288_DSI0_LCDC_SEL_MASK, |
| RK3288_DSI0_LCDC_SEL_LIT |
| << RK3288_DSI0_LCDC_SEL_SHIFT); |
| break; |
| default: |
| debug("%s: Invalid VOP id\n", __func__); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* Setup mipi dphy working mode */ |
| static void rk_mipi_dphy_mode_set(struct udevice *dev) |
| { |
| struct rk_mipi_priv *priv = dev_get_priv(dev); |
| struct rk3288_grf *grf = priv->grf; |
| int val; |
| |
| /* Set Controller as TX mode */ |
| val = RK3288_DPHY_TX0_RXMODE_DIS << RK3288_DPHY_TX0_RXMODE_SHIFT; |
| rk_clrsetreg(&grf->soc_con8, RK3288_DPHY_TX0_RXMODE_MASK, val); |
| |
| /* Exit tx stop mode */ |
| val |= RK3288_DPHY_TX0_TXSTOPMODE_EN |
| << RK3288_DPHY_TX0_TXSTOPMODE_SHIFT; |
| rk_clrsetreg(&grf->soc_con8, |
| RK3288_DPHY_TX0_TXSTOPMODE_MASK, val); |
| |
| /* Disable turnequest */ |
| val |= RK3288_DPHY_TX0_TURNREQUEST_EN |
| << RK3288_DPHY_TX0_TURNREQUEST_SHIFT; |
| rk_clrsetreg(&grf->soc_con8, |
| RK3288_DPHY_TX0_TURNREQUEST_MASK, val); |
| } |
| |
| /* |
| * This function is called by rk_display_init() using rk_mipi_dsi_enable() and |
| * rk_mipi_phy_enable() to initialize mipi controller and dphy. If success, |
| * enable backlight. |
| */ |
| static int rk_mipi_enable(struct udevice *dev, int panel_bpp, |
| const struct display_timing *timing) |
| { |
| int ret; |
| struct rk_mipi_priv *priv = dev_get_priv(dev); |
| |
| /* Fill the mipi controller parameter */ |
| priv->ref_clk = 24 * MHz; |
| priv->sys_clk = priv->ref_clk; |
| priv->pix_clk = timing->pixelclock.typ; |
| priv->phy_clk = priv->pix_clk * 6; |
| priv->txbyte_clk = priv->phy_clk / 8; |
| priv->txesc_clk = 20 * MHz; |
| |
| /* Select vop port, big or little */ |
| rk_mipi_dsi_source_select(dev); |
| |
| /* Set mipi dphy work mode */ |
| rk_mipi_dphy_mode_set(dev); |
| |
| /* Config and enable mipi dsi according to timing */ |
| ret = rk_mipi_dsi_enable(dev, timing); |
| if (ret) { |
| debug("%s: rk_mipi_dsi_enable() failed (err=%d)\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| /* Config and enable mipi phy */ |
| ret = rk_mipi_phy_enable(dev); |
| if (ret) { |
| debug("%s: rk_mipi_phy_enable() failed (err=%d)\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| /* Enable backlight */ |
| ret = panel_enable_backlight(priv->panel); |
| if (ret) { |
| debug("%s: panel_enable_backlight() failed (err=%d)\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int rk_mipi_of_to_plat(struct udevice *dev) |
| { |
| struct rk_mipi_priv *priv = dev_get_priv(dev); |
| |
| priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); |
| if (IS_ERR_OR_NULL(priv->grf)) { |
| debug("%s: Get syscon grf failed (ret=%p)\n", |
| __func__, priv->grf); |
| return -ENXIO; |
| } |
| priv->regs = dev_read_addr(dev); |
| if (priv->regs == FDT_ADDR_T_NONE) { |
| debug("%s: Get MIPI dsi address failed (ret=%lu)\n", __func__, |
| priv->regs); |
| return -ENXIO; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Probe function: check panel existence and readingit's timing. Then config |
| * mipi dsi controller and enable it according to the timing parameter. |
| */ |
| static int rk_mipi_probe(struct udevice *dev) |
| { |
| int ret; |
| struct rk_mipi_priv *priv = dev_get_priv(dev); |
| |
| ret = uclass_get_device_by_phandle(UCLASS_PANEL, dev, "rockchip,panel", |
| &priv->panel); |
| if (ret) { |
| debug("%s: Can not find panel (err=%d)\n", __func__, ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static const struct dm_display_ops rk_mipi_dsi_ops = { |
| .read_timing = rk_mipi_read_timing, |
| .enable = rk_mipi_enable, |
| }; |
| |
| static const struct udevice_id rk_mipi_dsi_ids[] = { |
| { .compatible = "rockchip,rk3288-mipi-dsi" }, |
| { .compatible = "rockchip,rk3288_mipi_dsi" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(rk_mipi_dsi) = { |
| .name = "rk_mipi_dsi", |
| .id = UCLASS_DISPLAY, |
| .of_match = rk_mipi_dsi_ids, |
| .of_to_plat = rk_mipi_of_to_plat, |
| .probe = rk_mipi_probe, |
| .ops = &rk_mipi_dsi_ops, |
| .priv_auto = sizeof(struct rk_mipi_priv), |
| }; |