| #include <common.h> |
| |
| #if (CONFIG_COMMANDS & CFG_CMD_NAND) && defined CONFIG_NEW_NAND_CODE |
| |
| #include <command.h> |
| #include <watchdog.h> |
| #include <malloc.h> |
| #include <asm/byteorder.h> |
| |
| #ifdef CONFIG_SHOW_BOOT_PROGRESS |
| # include <status_led.h> |
| # define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) |
| #else |
| # define SHOW_BOOT_PROGRESS(arg) |
| #endif |
| |
| #include <jffs2/jffs2.h> |
| #include <nand.h> |
| |
| extern nand_info_t nand_info[]; /* info for NAND chips */ |
| |
| static int nand_dump_oob(nand_info_t *nand, ulong off) |
| { |
| return 0; |
| } |
| |
| static int nand_dump(nand_info_t *nand, ulong off) |
| { |
| int i; |
| u_char *buf, *p; |
| |
| buf = malloc(nand->oobblock + nand->oobsize); |
| if (!buf) { |
| puts("No memory for page buffer\n"); |
| return 1; |
| } |
| off &= ~(nand->oobblock - 1); |
| i = nand_read_raw(nand, buf, off, nand->oobblock, nand->oobsize); |
| if (i < 0) { |
| printf("Error (%d) reading page %08x\n", i, off); |
| free(buf); |
| return 1; |
| } |
| printf("Page %08x dump:\n", off); |
| i = nand->oobblock >> 4; p = buf; |
| while (i--) { |
| printf( "\t%02x %02x %02x %02x %02x %02x %02x %02x" |
| " %02x %02x %02x %02x %02x %02x %02x %02x\n", |
| p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7], |
| p[8], p[9], p[10], p[11], p[12], p[13], p[14], p[15]); |
| p += 16; |
| } |
| puts("OOB:\n"); |
| i = nand->oobsize >> 3; |
| while (i--) { |
| printf( "\t%02x %02x %02x %02x %02x %02x %02x %02x\n", |
| p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7]); |
| p += 8; |
| } |
| free(buf); |
| |
| return 0; |
| } |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| static void |
| arg_off_size(int argc, char *argv[], ulong *off, ulong *size, ulong totsize) |
| { |
| *off = 0; |
| *size = 0; |
| |
| #if defined(CONFIG_JFFS2_NAND) && defined(CFG_JFFS_CUSTOM_PART) |
| if (argc >= 1 && strcmp(argv[0], "partition") == 0) { |
| int part_num; |
| struct part_info *part; |
| const char *partstr; |
| |
| if (argc >= 2) |
| partstr = argv[1]; |
| else |
| partstr = getenv("partition"); |
| |
| if (partstr) |
| part_num = (int)simple_strtoul(partstr, NULL, 10); |
| else |
| part_num = 0; |
| |
| part = jffs2_part_info(part_num); |
| if (part == NULL) { |
| printf("\nInvalid partition %d\n", part_num); |
| return; |
| } |
| *size = part->size; |
| *off = (ulong)part->offset; |
| } else |
| #endif |
| { |
| if (argc >= 1) |
| *off = (ulong)simple_strtoul(argv[0], NULL, 16); |
| else |
| *off = 0; |
| |
| if (argc >= 2) |
| *size = (ulong)simple_strtoul(argv[1], NULL, 16); |
| else |
| *size = totsize - *off; |
| |
| } |
| |
| } |
| |
| int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) |
| { |
| int i, dev, ret; |
| ulong addr, off, size; |
| char *cmd, *s; |
| nand_info_t *nand; |
| |
| /* at least two arguments please */ |
| if (argc < 2) |
| goto usage; |
| |
| cmd = argv[1]; |
| |
| if (strcmp(cmd, "info") == 0) { |
| |
| putc('\n'); |
| for (i = 0; i < CFG_MAX_NAND_DEVICE; i++) { |
| if (nand_info[i].name) |
| printf("Device %d: %s\n", i, nand_info[i].name); |
| } |
| return 0; |
| } |
| |
| if (strcmp(cmd, "device") == 0) { |
| |
| if (argc < 3) { |
| if ((nand_curr_device < 0) || |
| (nand_curr_device >= CFG_MAX_NAND_DEVICE)) |
| puts("\nno devices available\n"); |
| else |
| printf("\nDevice %d: %s\n", nand_curr_device, |
| nand_info[nand_curr_device].name); |
| return 0; |
| } |
| dev = (int)simple_strtoul(argv[2], NULL, 10); |
| if (dev < 0 || dev >= CFG_MAX_NAND_DEVICE || !nand_info[dev].name) { |
| puts("No such device\n"); |
| return 1; |
| } |
| printf("Device %d: %s", dev, nand_info[dev].name); |
| puts("... is now current device\n"); |
| nand_curr_device = dev; |
| return 0; |
| } |
| |
| if (strcmp(cmd, "bad") != 0 && strcmp(cmd, "erase") != 0 && |
| strncmp(cmd, "dump", 4) != 0 && |
| strncmp(cmd, "read", 4) != 0 && strncmp(cmd, "write", 5) != 0) |
| goto usage; |
| |
| /* the following commands operate on the current device */ |
| if (nand_curr_device < 0 || nand_curr_device >= CFG_MAX_NAND_DEVICE || |
| !nand_info[nand_curr_device].name) { |
| puts("\nno devices available\n"); |
| return 1; |
| } |
| nand = &nand_info[nand_curr_device]; |
| |
| if (strcmp(cmd, "bad") == 0) { |
| printf("\nDevice %d bad blocks:\n", nand_curr_device); |
| for (off = 0; off < nand->size; off += nand->erasesize) |
| if (nand_block_isbad(nand, off)) |
| printf(" %08x\n", off); |
| return 0; |
| } |
| |
| if (strcmp(cmd, "erase") == 0) { |
| arg_off_size(argc - 2, argv + 2, &off, &size, nand->size); |
| if (off == 0 && size == 0) |
| return 1; |
| |
| printf("\nNAND erase: device %d offset 0x%x, size 0x%x ", |
| nand_curr_device, off, size); |
| ret = nand_erase(nand, off, size); |
| printf("%s\n", ret ? "ERROR" : "OK"); |
| |
| return ret == 0 ? 0 : 1; |
| } |
| |
| if (strncmp(cmd, "dump", 4) == 0) { |
| if (argc < 3) |
| goto usage; |
| |
| s = strchr(cmd, '.'); |
| off = (int)simple_strtoul(argv[2], NULL, 16); |
| |
| if (s != NULL && strcmp(s, ".oob") == 0) |
| ret = nand_dump_oob(nand, off); |
| else |
| ret = nand_dump(nand, off); |
| |
| return ret == 0 ? 1 : 0; |
| |
| } |
| |
| /* read write */ |
| if (strncmp(cmd, "read", 4) == 0 || strncmp(cmd, "write", 5) == 0) { |
| if (argc < 4) |
| goto usage; |
| /* |
| s = strchr(cmd, '.'); |
| clean = CLEAN_NONE; |
| if (s != NULL) { |
| if (strcmp(s, ".jffs2") == 0 || strcmp(s, ".e") == 0 |
| || strcmp(s, ".i")) |
| clean = CLEAN_JFFS2; |
| } |
| */ |
| addr = (ulong)simple_strtoul(argv[2], NULL, 16); |
| |
| arg_off_size(argc - 3, argv + 3, &off, &size, nand->size); |
| if (off == 0 && size == 0) |
| return 1; |
| |
| i = strncmp(cmd, "read", 4) == 0; /* 1 = read, 0 = write */ |
| printf("\nNAND %s: device %d offset %u, size %u ... ", |
| i ? "read" : "write", nand_curr_device, off, size); |
| |
| if (i) |
| ret = nand_read(nand, off, &size, (u_char *)addr); |
| else |
| ret = nand_write(nand, off, &size, (u_char *)addr); |
| |
| printf(" %d bytes %s: %s\n", size, |
| i ? "read" : "written", ret ? "ERROR" : "OK"); |
| |
| return ret == 0 ? 0 : 1; |
| } |
| usage: |
| printf("Usage:\n%s\n", cmdtp->usage); |
| return 1; |
| } |
| |
| U_BOOT_CMD(nand, 5, 1, do_nand, |
| "nand - NAND sub-system\n", |
| "info - show available NAND devices\n" |
| "nand device [dev] - show or set current device\n" |
| "nand read[.jffs2] - addr off size\n" |
| "nand write[.jffs2] - addr off size - read/write `size' bytes starting\n" |
| " at offset `off' to/from memory address `addr'\n" |
| "nand erase [clean] [off size] - erase `size' bytes from\n" |
| " offset `off' (entire device if not specified)\n" |
| "nand bad - show bad blocks\n" |
| "nand dump[.oob] off - dump page\n" |
| "nand scrub - really clean NAND erasing bad blocks (UNSAFE)\n" |
| "nand markbad off - mark bad block at offset (UNSAFE)\n" |
| "nand biterr off - make a bit error at offset (UNSAFE)\n"); |
| |
| int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) |
| { |
| char *boot_device = NULL; |
| char *ep; |
| int dev; |
| int r; |
| ulong addr, cnt, offset = 0; |
| image_header_t *hdr; |
| nand_info_t *nand; |
| |
| switch (argc) { |
| case 1: |
| addr = CFG_LOAD_ADDR; |
| boot_device = getenv("bootdevice"); |
| break; |
| case 2: |
| addr = simple_strtoul(argv[1], NULL, 16); |
| boot_device = getenv("bootdevice"); |
| break; |
| case 3: |
| addr = simple_strtoul(argv[1], NULL, 16); |
| boot_device = argv[2]; |
| break; |
| case 4: |
| addr = simple_strtoul(argv[1], NULL, 16); |
| boot_device = argv[2]; |
| offset = simple_strtoul(argv[3], NULL, 16); |
| break; |
| default: |
| printf("Usage:\n%s\n", cmdtp->usage); |
| SHOW_BOOT_PROGRESS(-1); |
| return 1; |
| } |
| |
| if (!boot_device) { |
| puts("\n** No boot device **\n"); |
| SHOW_BOOT_PROGRESS(-1); |
| return 1; |
| } |
| |
| dev = simple_strtoul(boot_device, &ep, 16); |
| |
| if (dev < 0 || dev >= CFG_MAX_NAND_DEVICE || !nand_info[dev].name) { |
| printf("\n** Device %d not available\n", dev); |
| SHOW_BOOT_PROGRESS(-1); |
| return 1; |
| } |
| |
| nand = &nand_info[dev]; |
| printf("\nLoading from device %d: %s (offset 0x%lx)\n", |
| dev, nand->name, offset); |
| |
| cnt = nand->oobblock; |
| r = nand_read(nand, offset, &cnt, (u_char *) addr); |
| if (r) { |
| printf("** Read error on %d\n", dev); |
| SHOW_BOOT_PROGRESS(-1); |
| return 1; |
| } |
| |
| hdr = (image_header_t *) addr; |
| |
| if (ntohl(hdr->ih_magic) != IH_MAGIC) { |
| printf("\n** Bad Magic Number 0x%x **\n", hdr->ih_magic); |
| SHOW_BOOT_PROGRESS(-1); |
| return 1; |
| } |
| |
| print_image_hdr(hdr); |
| |
| cnt = (ntohl(hdr->ih_size) + sizeof (image_header_t)); |
| |
| r = nand_read(nand, offset, &cnt, (u_char *) addr); |
| if (r) { |
| printf("** Read error on %d\n", dev); |
| SHOW_BOOT_PROGRESS(-1); |
| return 1; |
| } |
| |
| /* Loading ok, update default load address */ |
| |
| load_addr = addr; |
| |
| /* Check if we should attempt an auto-start */ |
| if (((ep = getenv("autostart")) != NULL) && (strcmp(ep, "yes") == 0)) { |
| char *local_args[2]; |
| extern int do_bootm(cmd_tbl_t *, int, int, char *[]); |
| |
| local_args[0] = argv[0]; |
| local_args[1] = NULL; |
| |
| printf("Automatic boot of image at addr 0x%08lx ...\n", addr); |
| |
| do_bootm(cmdtp, 0, 1, local_args); |
| return 1; |
| } |
| return 0; |
| } |
| |
| U_BOOT_CMD(nboot, 4, 1, do_nandboot, |
| "nboot - boot from NAND device\n", "loadAddr dev\n"); |
| |
| |
| #endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */ |