| /* |
| * (C) Copyright 2002-2004 |
| * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <malloc.h> |
| #include <net.h> |
| #include <asm/io.h> |
| #include <pci.h> |
| #include <405gp_pci.h> |
| #include <asm/processor.h> |
| |
| #include "pci405.h" |
| |
| |
| #if (CONFIG_COMMANDS & CFG_CMD_BSP) |
| |
| extern int do_bootm (cmd_tbl_t *, int, int, char *[]); |
| extern int do_bootvx (cmd_tbl_t *, int, int, char *[]); |
| unsigned long get_dcr(unsigned short); |
| |
| |
| /* |
| * Command loadpci: wait for signal from host and boot image. |
| */ |
| int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| unsigned int *ptr = 0; |
| int count = 0; |
| int count2 = 0; |
| int status; |
| int i; |
| char addr[16]; |
| char str[] = "\\|/-"; |
| char *local_args[2]; |
| |
| /* |
| * Mark sync address |
| */ |
| ptr = 0; |
| *ptr = 0xffffffff; |
| puts("\nWaiting for image from pci host -"); |
| |
| /* |
| * Wait for host to write the start address |
| */ |
| while (*ptr == 0xffffffff) { |
| count++; |
| if (!(count % 100)) { |
| count2++; |
| putc(0x08); /* backspace */ |
| putc(str[count2 % 4]); |
| } |
| |
| /* Abort if ctrl-c was pressed */ |
| if (ctrlc()) { |
| puts("\nAbort\n"); |
| return 0; |
| } |
| |
| udelay(1000); |
| } |
| |
| if (*ptr == PCI_RECONFIG_MAGIC) { |
| /* |
| * Save own pci configuration in PRAM |
| */ |
| memset((char *)PCI_REGS_ADDR, 0, PCI_REGS_LEN); |
| ptr = (unsigned int *)PCI_REGS_ADDR + 1; |
| for (i=0; i<0x40; i+=4) { |
| pci_read_config_dword(PCIDEVID_405GP, i, ptr++); |
| } |
| ptr = (unsigned int *)PCI_REGS_ADDR; |
| *ptr = crc32(0, (char *)PCI_REGS_ADDR+4, PCI_REGS_LEN-4); |
| |
| printf("\nStoring PCI Configuration Regs...\n"); |
| } else { |
| sprintf(addr, "%08x", *ptr); |
| |
| #if 0 |
| /* |
| * Boot image |
| */ |
| if (*ptr & 0x00000001) { |
| /* |
| * Boot VxWorks image via bootvx |
| */ |
| addr[strlen(addr)-1] = '0'; |
| printf("\nBooting VxWorks-Image at addr 0x%s ...\n", addr); |
| setenv("loadaddr", addr); |
| |
| local_args[0] = argv[0]; |
| local_args[1] = NULL; |
| status = do_bootvx (cmdtp, 0, 1, local_args); |
| } else { |
| /* |
| * Boot image via bootm (normally Linux) |
| */ |
| printf("\nBooting Image at addr 0x%s ...\n", addr); |
| setenv("loadaddr", addr); |
| |
| local_args[0] = argv[0]; |
| local_args[1] = NULL; |
| status = do_bootm (cmdtp, 0, 1, local_args); |
| } |
| #else |
| /* |
| * Boot image via bootm |
| */ |
| printf("\nBooting Image at addr 0x%s ...\n", addr); |
| setenv("loadaddr", addr); |
| |
| local_args[0] = argv[0]; |
| local_args[1] = NULL; |
| status = do_bootm (cmdtp, 0, 1, local_args); |
| #endif |
| } |
| |
| return 0; |
| } |
| U_BOOT_CMD( |
| loadpci, 1, 1, do_loadpci, |
| "loadpci - Wait for pci-image and boot it\n", |
| NULL |
| ); |
| |
| #endif |
| |
| #if 1 /* test-only */ |
| int do_getpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| unsigned int val; |
| int i; |
| |
| printf("\nPCI Configuration Regs for PPC405GP:"); |
| for (i=0; i<0x64; i+=4) { |
| pci_read_config_dword(PCIDEVID_405GP, i, &val); |
| if (!(i % 0x10)) { |
| printf("\n%02x: ", i); |
| } |
| printf("%08x ", val); |
| } |
| printf("\n"); |
| |
| return 0; |
| } |
| U_BOOT_CMD( |
| getpci, 1, 1, do_getpci, |
| "getpci - Print own pci configuration registers\n", |
| NULL |
| ); |
| |
| int do_setpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| unsigned int addr; |
| unsigned int val; |
| |
| addr = simple_strtol (argv[1], NULL, 16); |
| val = simple_strtol (argv[2], NULL, 16); |
| |
| printf("\nWriting %08x to PCI reg %08x.\n", val, addr); |
| pci_write_config_dword(PCIDEVID_405GP, addr, val); |
| |
| return 0; |
| } |
| U_BOOT_CMD( |
| setpci, 3, 1, do_setpci, |
| "setpci - Set one pci configuration lword\n", |
| "<addr> <val>\n" |
| " - Write pci configuration lword <val> to <addr>.\n" |
| ); |
| |
| int do_dumpdcr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| int i; |
| |
| printf("\nDevice Configuration Registers (DCR's) for PPC405GP:"); |
| for (i=0; i<=0x1e0; i++) { |
| if (!(i % 0x8)) { |
| printf("\n%04x ", i); |
| } |
| printf("%08lx ", get_dcr(i)); |
| } |
| printf("\n"); |
| |
| return 0; |
| } |
| U_BOOT_CMD( |
| dumpdcr, 1, 1, do_dumpdcr, |
| "dumpdcr - Dump all DCR registers\n", |
| NULL |
| ); |
| |
| |
| int do_dumpspr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| printf("\nSpecial Purpose Registers (SPR's) for PPC405GP:"); |
| printf("\n%04x %08x ", 947, mfspr(947)); |
| printf("\n%04x %08x ", 9, mfspr(9)); |
| printf("\n%04x %08x ", 1014, mfspr(1014)); |
| printf("\n%04x %08x ", 1015, mfspr(1015)); |
| printf("\n%04x %08x ", 1010, mfspr(1010)); |
| printf("\n%04x %08x ", 957, mfspr(957)); |
| printf("\n%04x %08x ", 1008, mfspr(1008)); |
| printf("\n%04x %08x ", 1018, mfspr(1018)); |
| printf("\n%04x %08x ", 954, mfspr(954)); |
| printf("\n%04x %08x ", 950, mfspr(950)); |
| printf("\n%04x %08x ", 951, mfspr(951)); |
| printf("\n%04x %08x ", 981, mfspr(981)); |
| printf("\n%04x %08x ", 980, mfspr(980)); |
| printf("\n%04x %08x ", 982, mfspr(982)); |
| printf("\n%04x %08x ", 1012, mfspr(1012)); |
| printf("\n%04x %08x ", 1013, mfspr(1013)); |
| printf("\n%04x %08x ", 948, mfspr(948)); |
| printf("\n%04x %08x ", 949, mfspr(949)); |
| printf("\n%04x %08x ", 1019, mfspr(1019)); |
| printf("\n%04x %08x ", 979, mfspr(979)); |
| printf("\n%04x %08x ", 8, mfspr(8)); |
| printf("\n%04x %08x ", 945, mfspr(945)); |
| printf("\n%04x %08x ", 987, mfspr(987)); |
| printf("\n%04x %08x ", 287, mfspr(287)); |
| printf("\n%04x %08x ", 953, mfspr(953)); |
| printf("\n%04x %08x ", 955, mfspr(955)); |
| printf("\n%04x %08x ", 272, mfspr(272)); |
| printf("\n%04x %08x ", 273, mfspr(273)); |
| printf("\n%04x %08x ", 274, mfspr(274)); |
| printf("\n%04x %08x ", 275, mfspr(275)); |
| printf("\n%04x %08x ", 260, mfspr(260)); |
| printf("\n%04x %08x ", 276, mfspr(276)); |
| printf("\n%04x %08x ", 261, mfspr(261)); |
| printf("\n%04x %08x ", 277, mfspr(277)); |
| printf("\n%04x %08x ", 262, mfspr(262)); |
| printf("\n%04x %08x ", 278, mfspr(278)); |
| printf("\n%04x %08x ", 263, mfspr(263)); |
| printf("\n%04x %08x ", 279, mfspr(279)); |
| printf("\n%04x %08x ", 26, mfspr(26)); |
| printf("\n%04x %08x ", 27, mfspr(27)); |
| printf("\n%04x %08x ", 990, mfspr(990)); |
| printf("\n%04x %08x ", 991, mfspr(991)); |
| printf("\n%04x %08x ", 956, mfspr(956)); |
| printf("\n%04x %08x ", 284, mfspr(284)); |
| printf("\n%04x %08x ", 285, mfspr(285)); |
| printf("\n%04x %08x ", 986, mfspr(986)); |
| printf("\n%04x %08x ", 984, mfspr(984)); |
| printf("\n%04x %08x ", 256, mfspr(256)); |
| printf("\n%04x %08x ", 1, mfspr(1)); |
| printf("\n%04x %08x ", 944, mfspr(944)); |
| printf("\n"); |
| |
| return 0; |
| } |
| U_BOOT_CMD( |
| dumpspr, 1, 1, do_dumpspr, |
| "dumpspr - Dump all SPR registers\n", |
| NULL |
| ); |
| |
| |
| #define PCI0_BRDGOPT1 0x4a |
| #define plb0_acr 0x87 |
| |
| int do_getplb(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| unsigned short val; |
| |
| printf("PLB0_ACR=%08lx\n", get_dcr(0x87)); |
| pci_read_config_word(PCIDEVID_405GP, PCI0_BRDGOPT1, &val); |
| printf("PCI0_BRDGOPT1=%04x\n", val); |
| printf("CCR0=%08x\n", mfspr(ccr0)); |
| |
| return 0; |
| } |
| U_BOOT_CMD( |
| getplb, 1, 1, do_getplb, |
| "getplb - Dump all plb arbiter registers\n", |
| NULL |
| ); |
| |
| int do_setplb(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| unsigned int my_acr; |
| unsigned int my_brdgopt1; |
| unsigned int my_ccr0; |
| |
| my_acr = simple_strtol (argv[1], NULL, 16); |
| my_brdgopt1 = simple_strtol (argv[2], NULL, 16); |
| my_ccr0 = simple_strtol (argv[3], NULL, 16); |
| |
| mtdcr(plb0_acr, my_acr); |
| pci_write_config_word(PCIDEVID_405GP, PCI0_BRDGOPT1, my_brdgopt1); |
| mtspr(ccr0, my_ccr0); |
| |
| return 0; |
| } |
| U_BOOT_CMD( |
| setplb, 4, 1, do_setplb, |
| "setplb - Set all plb arbiter registers\n", |
| "PLB0_ACR PCI0_BRDGOPT1 CCR0\n" |
| " - Set all plb arbiter registers\n" |
| ); |
| |
| |
| /*********************************************************************** |
| * |
| * The following code is only for test purposes!!!! |
| * Please ignore this ugly stuff!!!!!!!!!!!!!!!!!!! |
| * |
| ***********************************************************************/ |
| |
| #define PCI_ADDR 0xc0000000 |
| |
| int do_writepci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| unsigned int addr; |
| unsigned int size; |
| unsigned int countmax; |
| int i; |
| int max; |
| volatile unsigned long *ptr; |
| volatile unsigned long val; |
| int loopcount = 0; |
| int test_pci_read = 0; |
| int test_pci_cfg_write = 0; |
| int test_sync = 0; |
| int test_pci_pre_read = 0; |
| |
| addr = simple_strtol (argv[1], NULL, 16); |
| size = simple_strtol (argv[2], NULL, 16); |
| countmax = simple_strtol (argv[3], NULL, 16); |
| if (countmax == 0) |
| countmax = 1000; |
| |
| do_getplb(NULL, 0, 0, NULL); |
| |
| #if 0 |
| out32r(PMM0LA, 0); |
| out32r(PMM0PCILA, 0); |
| out32r(PMM0PCIHA, 0); |
| out32r(PMM0MA, 0); |
| out32r(PMM1LA, PCI_ADDR); |
| out32r(PMM1PCILA, addr & 0xff000000); |
| out32r(PMM1PCIHA, 0x00000000); |
| out32r(PMM1MA, 0xff000001); |
| #endif |
| |
| printf("PMM1LA =%08lx\n", in32r(PMM1LA)); |
| printf("PMM1MA =%08lx\n", in32r(PMM1MA)); |
| printf("PMM1PCILA =%08lx\n", in32r(PMM1PCILA)); |
| printf("PMM1PCIHA =%08lx\n", in32r(PMM1PCIHA)); |
| |
| addr = PCI_ADDR | (addr & 0x00ffffff); |
| printf("\nWriting at addr %08x, size %08x (countmax=%x)\n", addr, size, countmax); |
| |
| max = size >> 2; |
| |
| pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */ |
| |
| val = *(ulong *)0x00000000; |
| if (val & 0x00000008) { |
| test_pci_pre_read = 1; |
| printf("Running test with pre pci-memory-read access!\n"); |
| } |
| if (val & 0x00000004) { |
| test_sync = 1; |
| printf("Running test with sync instruction!\n"); |
| } |
| if (val & 0x00000001) { |
| test_pci_read = 1; |
| printf("Running test with pci-memory-read access!\n"); |
| } |
| if (val & 0x00000002) { |
| test_pci_cfg_write = 1; |
| printf("Running test with pci-config-write access!\n"); |
| } |
| |
| while (1) { |
| |
| if (test_pci_pre_read) { |
| /* |
| * Read one value back |
| */ |
| ptr = (volatile unsigned long *)addr; |
| val = *ptr; |
| } |
| |
| /* |
| * Write some values to host via pci busmastering |
| */ |
| ptr = (volatile unsigned long *)addr; |
| for (i=0; i<max; i++) { |
| *ptr++ = i; |
| } |
| |
| if (test_sync) { |
| /* |
| * Sync previous writes |
| */ |
| ppcSync(); |
| } |
| |
| if (test_pci_read) { |
| /* |
| * Read one value back |
| */ |
| ptr = (volatile unsigned long *)addr; |
| val = *ptr; |
| } |
| |
| if (test_pci_cfg_write) { |
| /* |
| * Generate IRQ to host via config regs |
| */ |
| pci_write_config_byte(PCIDEVID_405GP, 0x44, 0x00); |
| } |
| |
| if (loopcount++ > countmax) { |
| /* Abort if ctrl-c was pressed */ |
| if (ctrlc()) { |
| puts("\nAbort\n"); |
| return 0; |
| } |
| |
| putc('.'); |
| |
| loopcount = 0; |
| } |
| } |
| |
| return 0; |
| } |
| U_BOOT_CMD( |
| writepci, 4, 1, do_writepci, |
| "writepci - Write some data to pcibus\n", |
| "<addr> <size>\n" |
| " - Write some data to pcibus.\n" |
| ); |
| |
| #define PCI_CFGADDR 0xeec00000 |
| #define PCI_CFGDATA 0xeec00004 |
| |
| int ibmPciConfigWrite |
| ( |
| int offset, /* offset into the configuration space */ |
| int width, /* data width */ |
| unsigned int data /* data to be written */ |
| ) |
| { |
| /* |
| * Write config register address to the PCI config address register |
| * bit 31 must be 1 and bits 1:0 must be 0 (note LE bit notation) |
| */ |
| out32r(PCI_CFGADDR, 0x80000000 | (offset & 0xFFFFFFFC)); |
| |
| #if 0 /* test-only */ |
| ppcSync(); |
| #endif |
| |
| /* |
| * Write value to be written to the PCI config data register |
| */ |
| switch ( width ) { |
| case 1: out32r(PCI_CFGDATA | (offset & 0x3), (unsigned char)(data & 0xFF)); |
| break; |
| case 2: out32r(PCI_CFGDATA | (offset & 0x3), (unsigned short)(data & 0xFFFF)); |
| break; |
| case 4: out32r(PCI_CFGDATA | (offset & 0x3), data); |
| break; |
| } |
| |
| return (0); |
| } |
| |
| int do_writepci2(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| unsigned int addr; |
| unsigned int size; |
| unsigned int countmax; |
| int max; |
| volatile unsigned long *ptr; |
| volatile unsigned long val; |
| int loopcount = 0; |
| |
| addr = simple_strtol (argv[1], NULL, 16); |
| size = simple_strtol (argv[2], NULL, 16); |
| countmax = simple_strtol (argv[3], NULL, 16); |
| if (countmax == 0) |
| countmax = 1000; |
| |
| do_getplb(NULL, 0, 0, NULL); |
| |
| #if 0 |
| out32r(PMM0LA, 0); |
| out32r(PMM0PCILA, 0); |
| out32r(PMM0PCIHA, 0); |
| out32r(PMM0MA, 0); |
| out32r(PMM1LA, PCI_ADDR); |
| out32r(PMM1PCILA, addr & 0xff000000); |
| out32r(PMM1PCIHA, 0x00000000); |
| out32r(PMM1MA, 0xff000001); |
| #endif |
| |
| printf("PMM1LA =%08lx\n", in32r(PMM1LA)); |
| printf("PMM1MA =%08lx\n", in32r(PMM1MA)); |
| printf("PMM1PCILA =%08lx\n", in32r(PMM1PCILA)); |
| printf("PMM1PCIHA =%08lx\n", in32r(PMM1PCIHA)); |
| |
| addr = PCI_ADDR | (addr & 0x00ffffff); |
| printf("\nWriting at addr %08x, size %08x (countmax=%x)\n", addr, size, countmax); |
| |
| max = size >> 2; |
| |
| pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */ |
| |
| while (1) { |
| |
| /* |
| * Write one values to host via pci busmastering |
| */ |
| ptr = (volatile unsigned long *)addr; |
| *ptr = 0x01234567; |
| |
| /* |
| * Read one value back |
| */ |
| ptr = (volatile unsigned long *)addr; |
| val = *ptr; |
| |
| /* |
| * One pci config write |
| */ |
| /* pci_write_config_byte(PCIDEVID_405GP, 0x44, 0x00); */ |
| /* ibmPciConfigWrite(0x44, 1, 0x00); */ |
| ibmPciConfigWrite(0x2e, 2, 0x1234); /* subsystem id */ |
| |
| if (loopcount++ > countmax) { |
| /* Abort if ctrl-c was pressed */ |
| if (ctrlc()) { |
| puts("\nAbort\n"); |
| return 0; |
| } |
| |
| putc('.'); |
| |
| loopcount = 0; |
| } |
| } |
| |
| return 0; |
| } |
| U_BOOT_CMD( |
| writepci2, 4, 1, do_writepci2, |
| "writepci2- Write some data to pcibus\n", |
| "<addr> <size>\n" |
| " - Write some data to pcibus.\n" |
| ); |
| |
| int do_writepci22(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| unsigned int addr; |
| unsigned int size; |
| unsigned int countmax = 0; |
| volatile unsigned long *ptr; |
| volatile unsigned long val; |
| |
| addr = simple_strtol (argv[1], NULL, 16); |
| size = simple_strtol (argv[2], NULL, 16); |
| |
| addr = PCI_ADDR | (addr & 0x00ffffff); |
| printf("\nWriting at addr %08x, size %08x (countmax=%x)\n", addr, size, countmax); |
| pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */ |
| |
| while (1) { |
| |
| /* |
| * Write one values to host via pci busmastering |
| */ |
| ptr = (volatile unsigned long *)addr; |
| *ptr = 0x01234567; |
| |
| /* |
| * Read one value back |
| */ |
| ptr = (volatile unsigned long *)addr; |
| val = *ptr; |
| |
| /* |
| * One pci config write |
| */ |
| ibmPciConfigWrite(0x2e, 2, 0x1234); /* subsystem id */ |
| } |
| |
| return 0; |
| } |
| U_BOOT_CMD( |
| writepci22, 4, 1, do_writepci22, |
| "writepci22- Write some data to pcibus\n", |
| "<addr> <size>\n" |
| " - Write some data to pcibus.\n" |
| ); |
| |
| int ibmPciConfigWrite3 |
| ( |
| int offset, /* offset into the configuration space */ |
| int width, /* data width */ |
| unsigned int data /* data to be written */ |
| ) |
| { |
| /* |
| * Write config register address to the PCI config address register |
| * bit 31 must be 1 and bits 1:0 must be 0 (note LE bit notation) |
| */ |
| out32r(PCI_CFGADDR, 0x80000000 | (offset & 0xFFFFFFFC)); |
| |
| #if 1 /* test-only */ |
| ppcSync(); |
| #endif |
| |
| /* |
| * Write value to be written to the PCI config data register |
| */ |
| switch ( width ) { |
| case 1: out32r(PCI_CFGDATA | (offset & 0x3), (unsigned char)(data & 0xFF)); |
| break; |
| case 2: out32r(PCI_CFGDATA | (offset & 0x3), (unsigned short)(data & 0xFFFF)); |
| break; |
| case 4: out32r(PCI_CFGDATA | (offset & 0x3), data); |
| break; |
| } |
| |
| return (0); |
| } |
| |
| int do_writepci3(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| unsigned int addr; |
| unsigned int size; |
| unsigned int countmax; |
| int max; |
| volatile unsigned long *ptr; |
| volatile unsigned long val; |
| int loopcount = 0; |
| |
| addr = simple_strtol (argv[1], NULL, 16); |
| size = simple_strtol (argv[2], NULL, 16); |
| countmax = simple_strtol (argv[3], NULL, 16); |
| if (countmax == 0) |
| countmax = 1000; |
| |
| do_getplb(NULL, 0, 0, NULL); |
| |
| #if 0 |
| out32r(PMM0LA, 0); |
| out32r(PMM0PCILA, 0); |
| out32r(PMM0PCIHA, 0); |
| out32r(PMM0MA, 0); |
| out32r(PMM1LA, PCI_ADDR); |
| out32r(PMM1PCILA, addr & 0xff000000); |
| out32r(PMM1PCIHA, 0x00000000); |
| out32r(PMM1MA, 0xff000001); |
| #endif |
| |
| printf("PMM1LA =%08lx\n", in32r(PMM1LA)); |
| printf("PMM1MA =%08lx\n", in32r(PMM1MA)); |
| printf("PMM1PCILA =%08lx\n", in32r(PMM1PCILA)); |
| printf("PMM1PCIHA =%08lx\n", in32r(PMM1PCIHA)); |
| |
| addr = PCI_ADDR | (addr & 0x00ffffff); |
| printf("\nWriting at addr %08x, size %08x (countmax=%x)\n", addr, size, countmax); |
| |
| max = size >> 2; |
| |
| pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */ |
| |
| while (1) { |
| |
| /* |
| * Write one values to host via pci busmastering |
| */ |
| ptr = (volatile unsigned long *)addr; |
| *ptr = 0x01234567; |
| |
| /* |
| * Read one value back |
| */ |
| ptr = (volatile unsigned long *)addr; |
| val = *ptr; |
| |
| /* |
| * One pci config write |
| */ |
| /* pci_write_config_byte(PCIDEVID_405GP, 0x44, 0x00); */ |
| /* ibmPciConfigWrite(0x44, 1, 0x00); */ |
| ibmPciConfigWrite3(0x2e, 2, 0x1234); /* subsystem id */ |
| |
| if (loopcount++ > countmax) { |
| /* Abort if ctrl-c was pressed */ |
| if (ctrlc()) { |
| puts("\nAbort\n"); |
| return 0; |
| } |
| |
| putc('.'); |
| |
| loopcount = 0; |
| } |
| } |
| |
| return 0; |
| } |
| U_BOOT_CMD( |
| writepci3, 4, 1, do_writepci3, |
| "writepci3- Write some data to pcibus\n", |
| "<addr> <size>\n" |
| " - Write some data to pcibus.\n" |
| ); |
| |
| |
| #define SECTOR_SIZE 32 /* 32 byte cache line */ |
| #define SECTOR_MASK 0x1F |
| |
| void my_flush_dcache(ulong lcl_addr, ulong count) |
| { |
| unsigned int lcl_target; |
| |
| /* promote to nearest cache sector */ |
| lcl_target = (lcl_addr + count + SECTOR_SIZE - 1) & ~SECTOR_MASK; |
| lcl_addr &= ~SECTOR_MASK; |
| while (lcl_addr != lcl_target) |
| { |
| /* ppcDcbf((void *)lcl_addr);*/ |
| __asm__("dcbf 0,%0": :"r" (lcl_addr)); |
| lcl_addr += SECTOR_SIZE; |
| } |
| __asm__("sync"); /* Always flush prefetch queue in any case */ |
| } |
| |
| int do_writepci_cache(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| unsigned int addr; |
| unsigned int size; |
| unsigned int countmax; |
| int i; |
| volatile unsigned long *ptr; |
| volatile unsigned long val; |
| int loopcount = 0; |
| |
| addr = simple_strtol (argv[1], NULL, 16); |
| size = simple_strtol (argv[2], NULL, 16); |
| countmax = simple_strtol (argv[3], NULL, 16); |
| if (countmax == 0) |
| countmax = 1000; |
| |
| do_getplb(NULL, 0, 0, NULL); |
| |
| #if 0 |
| out32r(PMM0LA, 0); |
| out32r(PMM0PCILA, 0); |
| out32r(PMM0PCIHA, 0); |
| out32r(PMM0MA, 0); |
| out32r(PMM1LA, PCI_ADDR); |
| out32r(PMM1PCILA, addr & 0xff000000); |
| out32r(PMM1PCIHA, 0x00000000); |
| out32r(PMM1MA, 0xff000001); |
| #endif |
| |
| printf("PMM1LA =%08lx\n", in32r(PMM1LA)); |
| printf("PMM1MA =%08lx\n", in32r(PMM1MA)); |
| printf("PMM1PCILA =%08lx\n", in32r(PMM1PCILA)); |
| printf("PMM1PCIHA =%08lx\n", in32r(PMM1PCIHA)); |
| |
| addr = PCI_ADDR | (addr & 0x00ffffff); |
| printf("\nWriting at addr %08x, size %08x (countmax=%x)\n", addr, size, countmax); |
| |
| pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */ |
| |
| i = 0; |
| |
| /* |
| * Set pci region as cachable |
| */ |
| ppcSync(); |
| __asm__ volatile (" addis 4,0,0x0000 "); |
| __asm__ volatile (" addi 4,4,0x0080 "); |
| __asm__ volatile (" mtdccr 4 "); |
| ppcSync(); |
| |
| while (1) { |
| |
| /* |
| * Write one values to host via pci busmastering |
| */ |
| ptr = (volatile unsigned long *)addr; |
| printf("A\n"); /* test-only */ |
| *ptr++ = i++; |
| *ptr++ = i++; |
| *ptr++ = i++; |
| *ptr++ = i++; |
| *ptr++ = i++; |
| *ptr++ = i++; |
| *ptr++ = i++; |
| *ptr++ = i++; |
| printf("B\n"); /* test-only */ |
| my_flush_dcache(addr, 32); |
| printf("C\n"); /* test-only */ |
| |
| /* |
| * Read one value back |
| */ |
| ptr = (volatile unsigned long *)addr; |
| val = *ptr; |
| printf("D\n"); /* test-only */ |
| |
| /* |
| * One pci config write |
| */ |
| /* pci_write_config_byte(PCIDEVID_405GP, 0x44, 0x00); */ |
| /* ibmPciConfigWrite(0x44, 1, 0x00); */ |
| ibmPciConfigWrite3(0x2e, 2, 0x1234); /* subsystem id */ |
| printf("E\n"); /* test-only */ |
| |
| if (loopcount++ > countmax) { |
| /* Abort if ctrl-c was pressed */ |
| if (ctrlc()) { |
| puts("\nAbort\n"); |
| return 0; |
| } |
| |
| putc('.'); |
| |
| loopcount = 0; |
| } |
| } |
| |
| return 0; |
| } |
| U_BOOT_CMD( |
| writepci_cache, 4, 1, do_writepci_cache, |
| "writepci_cache - Write some data to pcibus\n", |
| "<addr> <size>\n" |
| " - Write some data to pcibus.\n" |
| ); |
| |
| int do_savepci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| unsigned int *ptr; |
| int i; |
| |
| /* |
| * Save own pci configuration in PRAM |
| */ |
| memset((char *)PCI_REGS_ADDR, 0, PCI_REGS_LEN); |
| ptr = (unsigned int *)PCI_REGS_ADDR + 1; |
| for (i=0; i<0x40; i+=4) { |
| pci_read_config_dword(PCIDEVID_405GP, i, ptr++); |
| } |
| ptr = (unsigned int *)PCI_REGS_ADDR; |
| *ptr = crc32(0, (char *)PCI_REGS_ADDR+4, PCI_REGS_LEN-4); |
| |
| printf("\nStoring PCI Configuration Regs...\n"); |
| |
| return 0; |
| } |
| U_BOOT_CMD( |
| savepci, 4, 1, do_savepci, |
| "savepci - Save all pci regs\n", |
| "<addr> <size>\n" |
| " - Write some data to pcibus.\n" |
| ); |
| |
| int do_restorepci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| unsigned int *ptr; |
| int i; |
| |
| /* |
| * Rewrite pci config regs (only after soft-reset with magic set) |
| */ |
| ptr = (unsigned int *)PCI_REGS_ADDR; |
| if (crc32(0, (char *)PCI_REGS_ADDR+4, PCI_REGS_LEN-4) == *ptr) { |
| puts("Restoring PCI Configurations Regs!\n"); |
| ptr = (unsigned int *)PCI_REGS_ADDR + 1; |
| for (i=0; i<0x40; i+=4) { |
| pci_write_config_dword(PCIDEVID_405GP, i, *ptr++); |
| } |
| } |
| mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ |
| |
| return 0; |
| } |
| U_BOOT_CMD( |
| restorepci, 4, 1, do_restorepci, |
| "restorepci - Restore all pci regs\n", |
| "<addr> <size>\n" |
| " - Write some data to pcibus.\n" |
| ); |
| |
| |
| extern void write_without_sync(void); |
| extern void write_with_sync(void); |
| extern void write_with_less_sync(void); |
| extern void write_with_more_sync(void); |
| |
| /* |
| * code from IBM-PPCSUPP |
| */ |
| int do_writeibm1(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */ |
| |
| write_without_sync(); |
| |
| return 0; |
| } |
| U_BOOT_CMD( |
| writeibm1, 4, 1, do_writeibm1, |
| "writeibm1- Write some data to pcibus (without sync)\n", |
| "<addr> <size>\n" |
| " - Write some data to pcibus.\n" |
| ); |
| |
| int do_writeibm2(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */ |
| |
| write_with_sync(); |
| |
| return 0; |
| } |
| U_BOOT_CMD( |
| writeibm2, 4, 1, do_writeibm2, |
| "writeibm2- Write some data to pcibus (with sync)\n", |
| "<addr> <size>\n" |
| " - Write some data to pcibus.\n" |
| ); |
| |
| int do_writeibm22(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */ |
| |
| write_with_less_sync(); |
| |
| return 0; |
| } |
| U_BOOT_CMD( |
| writeibm22, 4, 1, do_writeibm22, |
| "writeibm22- Write some data to pcibus (with less sync)\n", |
| "<addr> <size>\n" |
| " - Write some data to pcibus.\n" |
| ); |
| |
| int do_writeibm3(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */ |
| |
| write_with_more_sync(); |
| |
| return 0; |
| } |
| U_BOOT_CMD( |
| writeibm3, 4, 1, do_writeibm3, |
| "writeibm3- Write some data to pcibus (with more sync)\n", |
| "<addr> <size>\n" |
| " - Write some data to pcibus.\n" |
| ); |
| #endif |