blob: ceb7bcd9cfb9431bd3e9cd848b8574b3ce42ee1b [file] [log] [blame]
/*
* Copyright (c) 2011 The Chromium OS Authors.
* Copyright (c) 2013 NVIDIA Corporation
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _TEGRA_USB_H_
#define _TEGRA_USB_H_
/* USB Controller (USBx_CONTROLLER_) regs */
struct usb_ctlr {
/* 0x000 */
uint id;
uint reserved0;
uint host;
uint device;
/* 0x010 */
uint txbuf;
uint rxbuf;
uint reserved1[2];
/* 0x020 */
uint reserved2[56];
/* 0x100 */
u16 cap_length;
u16 hci_version;
uint hcs_params;
uint hcc_params;
uint reserved3[5];
/* 0x120 */
uint dci_version;
uint dcc_params;
uint reserved4[2];
#ifdef CONFIG_TEGRA20
/* 0x130 */
uint reserved4_2[4];
/* 0x140 */
uint usb_cmd;
uint usb_sts;
uint usb_intr;
uint frindex;
/* 0x150 */
uint reserved5;
uint periodic_list_base;
uint async_list_addr;
uint async_tt_sts;
/* 0x160 */
uint burst_size;
uint tx_fill_tuning;
uint reserved6; /* is this port_sc1 on some controllers? */
uint icusb_ctrl;
/* 0x170 */
uint ulpi_viewport;
uint reserved7;
uint endpt_nak;
uint endpt_nak_enable;
/* 0x180 */
uint reserved;
uint port_sc1;
uint reserved8[6];
/* 0x1a0 */
uint reserved9;
uint otgsc;
uint usb_mode;
uint endpt_setup_stat;
/* 0x1b0 */
uint reserved10[20];
/* 0x200 */
uint reserved11[0x80];
#else
/* 0x130 */
uint usb_cmd;
uint usb_sts;
uint usb_intr;
uint frindex;
/* 0x140 */
uint reserved5;
uint periodic_list_base;
uint async_list_addr;
uint reserved5_1;
/* 0x150 */
uint burst_size;
uint tx_fill_tuning;
uint reserved6;
uint icusb_ctrl;
/* 0x160 */
uint ulpi_viewport;
uint reserved7[3];
/* 0x170 */
uint reserved;
uint port_sc1;
uint reserved8[6];
/* 0x190 */
uint reserved9[8];
/* 0x1b0 */
uint reserved10;
uint hostpc1_devlc;
uint reserved10_1[2];
/* 0x1c0 */
uint reserved10_2[4];
/* 0x1d0 */
uint reserved10_3[4];
/* 0x1e0 */
uint reserved10_4[4];
/* 0x1f0 */
uint reserved10_5;
uint otgsc;
uint usb_mode;
uint reserved10_6;
/* 0x200 */
uint endpt_nak;
uint endpt_nak_enable;
uint endpt_setup_stat;
uint reserved11_1[0x7D];
#endif
/* 0x400 */
uint susp_ctrl;
uint phy_vbus_sensors;
uint phy_vbus_wakeup_id;
uint phy_alt_vbus_sys;
#ifdef CONFIG_TEGRA20
/* 0x410 */
uint usb1_legacy_ctrl;
uint reserved12[4];
/* 0x424 */
uint ulpi_timing_ctrl_0;
uint ulpi_timing_ctrl_1;
uint reserved13[53];
#else
/* 0x410 */
uint usb1_legacy_ctrl;
uint reserved12[3];
/* 0x420 */
uint reserved13[56];
#endif
/* 0x500 */
uint reserved14[64 * 3];
/* 0x800 */
uint utmip_pll_cfg0;
uint utmip_pll_cfg1;
uint utmip_xcvr_cfg0;
uint utmip_bias_cfg0;
/* 0x810 */
uint utmip_hsrx_cfg0;
uint utmip_hsrx_cfg1;
uint utmip_fslsrx_cfg0;
uint utmip_fslsrx_cfg1;
/* 0x820 */
uint utmip_tx_cfg0;
uint utmip_misc_cfg0;
uint utmip_misc_cfg1;
uint utmip_debounce_cfg0;
/* 0x830 */
uint utmip_bat_chrg_cfg0;
uint utmip_spare_cfg0;
uint utmip_xcvr_cfg1;
uint utmip_bias_cfg1;
};
/* USB1_LEGACY_CTRL */
#define USB1_NO_LEGACY_MODE 1
#define VBUS_SENSE_CTL_SHIFT 1
#define VBUS_SENSE_CTL_MASK (3 << VBUS_SENSE_CTL_SHIFT)
#define VBUS_SENSE_CTL_VBUS_WAKEUP 0
#define VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP 1
#define VBUS_SENSE_CTL_AB_SESS_VLD 2
#define VBUS_SENSE_CTL_A_SESS_VLD 3
/* USBx_IF_USB_SUSP_CTRL_0 */
#define UTMIP_PHY_ENB (1 << 12)
#define UTMIP_RESET (1 << 11)
#define USB_PHY_CLK_VALID (1 << 7)
#define USB_SUSP_CLR (1 << 5)
#if defined(CONFIG_TEGRA20) || defined(CONFIG_TEGRA30)
/* USB2_IF_USB_SUSP_CTRL_0 */
#define ULPI_PHY_ENB (1 << 13)
/* USB2_IF_ULPI_TIMING_CTRL_0 */
#define ULPI_OUTPUT_PINMUX_BYP (1 << 10)
#define ULPI_CLKOUT_PINMUX_BYP (1 << 11)
/* USB2_IF_ULPI_TIMING_CTRL_1 */
#define ULPI_DATA_TRIMMER_LOAD (1 << 0)
#define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1)
#define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16)
#define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17)
#define ULPI_DIR_TRIMMER_LOAD (1 << 24)
#define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25)
#endif
/* USBx_UTMIP_MISC_CFG0 */
#define UTMIP_SUSPEND_EXIT_ON_EDGE (1 << 22)
/* USBx_UTMIP_MISC_CFG1 */
#define UTMIP_PHY_XTAL_CLOCKEN (1 << 30)
/*
* Tegra 3 and later: Moved to Clock and Reset register space, see
* CLK_RST_CONTROLLER_UTMIP_PLL_CFG2_0
*/
#define UTMIP_PLLU_STABLE_COUNT_SHIFT 6
#define UTMIP_PLLU_STABLE_COUNT_MASK \
(0xfff << UTMIP_PLLU_STABLE_COUNT_SHIFT)
/*
* Tegra 3 and later: Moved to Clock and Reset register space, see
* CLK_RST_CONTROLLER_UTMIP_PLL_CFG2_0
*/
#define UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT 18
#define UTMIP_PLL_ACTIVE_DLY_COUNT_MASK \
(0x1f << UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT)
/* USBx_UTMIP_PLL_CFG1_0 */
/* Tegra 3 and later: Moved to Clock and Reset register space */
#define UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT 27
#define UTMIP_PLLU_ENABLE_DLY_COUNT_MASK \
(0x1f << UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT)
#define UTMIP_XTAL_FREQ_COUNT_SHIFT 0
#define UTMIP_XTAL_FREQ_COUNT_MASK 0xfff
/* USBx_UTMIP_BIAS_CFG0_0 */
#define UTMIP_HSDISCON_LEVEL_MSB (1 << 24)
#define UTMIP_OTGPD (1 << 11)
#define UTMIP_BIASPD (1 << 10)
#define UTMIP_HSDISCON_LEVEL_SHIFT 2
#define UTMIP_HSDISCON_LEVEL_MASK \
(0x3 << UTMIP_HSDISCON_LEVEL_SHIFT)
#define UTMIP_HSSQUELCH_LEVEL_SHIFT 0
#define UTMIP_HSSQUELCH_LEVEL_MASK \
(0x3 << UTMIP_HSSQUELCH_LEVEL_SHIFT)
/* USBx_UTMIP_BIAS_CFG1_0 */
#define UTMIP_FORCE_PDTRK_POWERDOWN 1
#define UTMIP_BIAS_PDTRK_COUNT_SHIFT 3
#define UTMIP_BIAS_PDTRK_COUNT_MASK \
(0x1f << UTMIP_BIAS_PDTRK_COUNT_SHIFT)
/* USBx_UTMIP_DEBOUNCE_CFG0_0 */
#define UTMIP_DEBOUNCE_CFG0_SHIFT 0
#define UTMIP_DEBOUNCE_CFG0_MASK 0xffff
/* USBx_UTMIP_TX_CFG0_0 */
#define UTMIP_FS_PREAMBLE_J (1 << 19)
/* USBx_UTMIP_BAT_CHRG_CFG0_0 */
#define UTMIP_PD_CHRG 1
/* USBx_UTMIP_SPARE_CFG0_0 */
#define FUSE_SETUP_SEL (1 << 3)
/* USBx_UTMIP_HSRX_CFG0_0 */
#define UTMIP_IDLE_WAIT_SHIFT 15
#define UTMIP_IDLE_WAIT_MASK (0x1f << UTMIP_IDLE_WAIT_SHIFT)
#define UTMIP_ELASTIC_LIMIT_SHIFT 10
#define UTMIP_ELASTIC_LIMIT_MASK \
(0x1f << UTMIP_ELASTIC_LIMIT_SHIFT)
/* USBx_UTMIP_HSRX_CFG1_0 */
#define UTMIP_HS_SYNC_START_DLY_SHIFT 1
#define UTMIP_HS_SYNC_START_DLY_MASK \
(0x1f << UTMIP_HS_SYNC_START_DLY_SHIFT)
/* USBx_CONTROLLER_2_USB2D_ICUSB_CTRL_0 */
#define IC_ENB1 (1 << 3)
#ifdef CONFIG_TEGRA20
/* PORTSC1, USB1 */
#define PTS1_SHIFT 31
#define PTS1_MASK (1 << PTS1_SHIFT)
#define STS1 (1 << 30)
/* PORTSC, USB2, USB3 */
#define PTS_SHIFT 30
#define PTS_MASK (3U << PTS_SHIFT)
#define STS (1 << 29)
#else
/* USB2D_HOSTPC1_DEVLC_0 */
#define PTS_SHIFT 29
#define PTS_MASK (0x7U << PTS_SHIFT)
#define STS (1 << 28)
#endif
#define PTS_UTMI 0
#define PTS_RESERVED 1
#define PTS_ULPI 2
#define PTS_ICUSB_SER 3
#define PTS_HSIC 4
/* SB2_CONTROLLER_2_USB2D_PORTSC1_0 */
#define WKOC (1 << 22)
#define WKDS (1 << 21)
#define WKCN (1 << 20)
/* USBx_UTMIP_XCVR_CFG0_0 */
#define UTMIP_FORCE_PD_POWERDOWN (1 << 14)
#define UTMIP_FORCE_PD2_POWERDOWN (1 << 16)
#define UTMIP_FORCE_PDZI_POWERDOWN (1 << 18)
#define UTMIP_XCVR_LSBIAS_SE (1 << 21)
#define UTMIP_XCVR_HSSLEW_MSB_SHIFT 25
#define UTMIP_XCVR_HSSLEW_MSB_MASK \
(0x7f << UTMIP_XCVR_HSSLEW_MSB_SHIFT)
#define UTMIP_XCVR_SETUP_MSB_SHIFT 22
#define UTMIP_XCVR_SETUP_MSB_MASK (0x7 << UTMIP_XCVR_SETUP_MSB_SHIFT)
#define UTMIP_XCVR_SETUP_SHIFT 0
#define UTMIP_XCVR_SETUP_MASK (0xf << UTMIP_XCVR_SETUP_SHIFT)
/* USBx_UTMIP_XCVR_CFG1_0 */
#define UTMIP_XCVR_TERM_RANGE_ADJ_SHIFT 18
#define UTMIP_XCVR_TERM_RANGE_ADJ_MASK \
(0xf << UTMIP_XCVR_TERM_RANGE_ADJ_SHIFT)
#define UTMIP_FORCE_PDDISC_POWERDOWN (1 << 0)
#define UTMIP_FORCE_PDCHRP_POWERDOWN (1 << 2)
#define UTMIP_FORCE_PDDR_POWERDOWN (1 << 4)
/* USB3_IF_USB_PHY_VBUS_SENSORS_0 */
#define VBUS_VLD_STS (1 << 26)
/* Setup USB on the board */
int usb_process_devicetree(const void *blob);
#endif /* _TEGRA_USB_H_ */