dts/upstream/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi - filogic/uboot - Gitiles

 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2019 BayLibre, SAS
  * Author: Neil Armstrong <narmstrong@baylibre.com>
  */

 #include "meson-g12b-odroid.dtsi"

 / {
 	aliases {
 		rtc0 = &rtc;
 	};

 	dio2133: audio-amplifier-0 {
 		compatible = "simple-audio-amplifier";
 		enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
 		VCC-supply = <&vcc_5v>;
 		sound-name-prefix = "U19";
 		status = "okay";
 	};

 	hub_5v: regulator-hub-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "HUB_5V";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		vin-supply = <&vcc_5v>;

 		/* Connected to the Hub CHIPENABLE, LOW sets low power state */
 		gpio = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};

 	/* USB hub supports both USB 2.0 and USB 3.0 root hub */
 	usb-hub {
 		dr_mode = "host";
 		#address-cells = <1>;
 		#size-cells = <0>;

 		/* 2.0 hub on port 1 */
 		hub_2_0: hub@1 {
 			compatible = "usb5e3,610";
 			reg = <1>;
 			peer-hub = <&hub_3_0>;
 			vdd-supply = <&usb_pwr_en>;
 		};

 		/* 3.0 hub on port 4 */
 		hub_3_0: hub@2 {
 			compatible = "usb5e3,620";
 			reg = <2>;
 			peer-hub = <&hub_2_0>;
 			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
 			vdd-supply = <&vcc_5v>;
 		};
 	};

 	sound {
 		compatible = "amlogic,axg-sound-card";
 		model = "ODROID-N2";
 		audio-widgets = "Line", "Lineout";
 		audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>,
 				 <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>,
 				 <&dio2133>;
 		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
 				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT",
 				"TDMOUT_C IN 0", "FRDDR_A OUT 2",
 				"TDMOUT_C IN 1", "FRDDR_B OUT 2",
 				"TDMOUT_C IN 2", "FRDDR_C OUT 2",
 				"TDM_C Playback", "TDMOUT_C OUT",
 				"TDMIN_A IN 4", "TDM_B Loopback",
 				"TDMIN_B IN 4", "TDM_B Loopback",
 				"TDMIN_C IN 4", "TDM_B Loopback",
 				"TDMIN_LB IN 1", "TDM_B Loopback",
 				"TDMIN_A IN 5", "TDM_C Loopback",
 				"TDMIN_B IN 5", "TDM_C Loopback",
 				"TDMIN_C IN 5", "TDM_C Loopback",
 				"TDMIN_LB IN 2", "TDM_C Loopback",
 				"TODDR_A IN 0", "TDMIN_A OUT",
 				"TODDR_B IN 0", "TDMIN_A OUT",
 				"TODDR_C IN 0", "TDMIN_A OUT",
 				"TODDR_A IN 1", "TDMIN_B OUT",
 				"TODDR_B IN 1", "TDMIN_B OUT",
 				"TODDR_C IN 1", "TDMIN_B OUT",
 				"TODDR_A IN 2", "TDMIN_C OUT",
 				"TODDR_B IN 2", "TDMIN_C OUT",
 				"TODDR_C IN 2", "TDMIN_C OUT",
 				"TODDR_A IN 6", "TDMIN_LB OUT",
 				"TODDR_B IN 6", "TDMIN_LB OUT",
 				"TODDR_C IN 6", "TDMIN_LB OUT",
 				"U19 INL", "ACODEC LOLP",
 				"U19 INR", "ACODEC LORP",
 				"Lineout", "U19 OUTL",
 				"Lineout", "U19 OUTR";

 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
 		assigned-clock-parents = <0>, <0>, <0>;
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;

 		dai-link-0 {
 			sound-dai = <&frddr_a>;
 		};

 		dai-link-1 {
 			sound-dai = <&frddr_b>;
 		};

 		dai-link-2 {
 			sound-dai = <&frddr_c>;
 		};

 		dai-link-3 {
 			sound-dai = <&toddr_a>;
 		};

 		dai-link-4 {
 			sound-dai = <&toddr_b>;
 		};

 		dai-link-5 {
 			sound-dai = <&toddr_c>;
 		};

 		/* 8ch hdmi interface */
 		dai-link-6 {
 			sound-dai = <&tdmif_b>;
 			dai-format = "i2s";
 			dai-tdm-slot-tx-mask-0 = <1 1>;
 			dai-tdm-slot-tx-mask-1 = <1 1>;
 			dai-tdm-slot-tx-mask-2 = <1 1>;
 			dai-tdm-slot-tx-mask-3 = <1 1>;
 			mclk-fs = <256>;

 			codec-0 {
 				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
 			};

 			codec-1 {
 				sound-dai = <&toacodec TOACODEC_IN_B>;
 			};
 		};

 		/* i2s jack output interface */
 		dai-link-7 {
 			sound-dai = <&tdmif_c>;
 			dai-format = "i2s";
 			dai-tdm-slot-tx-mask-0 = <1 1>;
 			mclk-fs = <256>;

 			codec-0 {
 				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
 			};

 			codec-1 {
 				sound-dai = <&toacodec TOACODEC_IN_C>;
 			};
 		};

 		/* hdmi glue */
 		dai-link-8 {
 			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;

 			codec {
 				sound-dai = <&hdmi_tx>;
 			};
 		};

 		/* acodec glue */
 		dai-link-9 {
 			sound-dai = <&toacodec TOACODEC_OUT>;

 			codec {
 				sound-dai = <&acodec>;
 			};
 		};
 	};
 };

 &acodec {
 	AVDD-supply = <&vddao_1v8>;
 	status = "okay";
 };

 &ethmac {
 	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
 	pinctrl-names = "default";
 	status = "okay";
 	phy-mode = "rgmii";
 	phy-handle = <&external_phy>;
 	amlogic,tx-delay-ns = <2>;
 };

 &ext_mdio {
 	external_phy: ethernet-phy@0 {
 		/* Realtek RTL8211F (0x001cc916) */
 		reg = <0>;
 		max-speed = <1000>;

 		reset-assert-us = <10000>;
 		reset-deassert-us = <80000>;
 		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;

 		interrupt-parent = <&gpio_intc>;
 		/* MAC_INTR on GPIOZ_14 */
 		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
 	};
 };

 &gpio {
 	gpio-line-names =
 		/* GPIOZ */
 		"", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "",
 		/* GPIOH */
 		"", "", "", "", "", "", "", "",
 		"",
 		/* BOOT */
 		"", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "",
 		/* GPIOC */
 		"", "", "", "", "", "", "", "",
 		/* GPIOA */
 		"PIN_44", /* GPIOA_0 */
 		"PIN_46", /* GPIOA_1 */
 		"PIN_45", /* GPIOA_2 */
 		"PIN_47", /* GPIOA_3 */
 		"PIN_26", /* GPIOA_4 */
 		"", "", "", "", "", "",
 		"PIN_42", /* GPIOA_11 */
 		"PIN_32", /* GPIOA_12 */
 		"PIN_7",  /* GPIOA_13 */
 		"PIN_27", /* GPIOA_14 */
 		"PIN_28", /* GPIOA_15 */
 		/* GPIOX */
 		"PIN_16", /* GPIOX_0 */
 		"PIN_18", /* GPIOX_1 */
 		"PIN_22", /* GPIOX_2 */
 		"PIN_11", /* GPIOX_3 */
 		"PIN_13", /* GPIOX_4 */
 		"PIN_33", /* GPIOX_5 */
 		"PIN_35", /* GPIOX_6 */
 		"PIN_15", /* GPIOX_7 */
 		"PIN_19", /* GPIOX_8 */
 		"PIN_21", /* GPIOX_9 */
 		"PIN_24", /* GPIOX_10 */
 		"PIN_23", /* GPIOX_11 */
 		"PIN_8",  /* GPIOX_12 */
 		"PIN_10", /* GPIOX_13 */
 		"PIN_29", /* GPIOX_14 */
 		"PIN_31", /* GPIOX_15 */
 		"PIN_12", /* GPIOX_16 */
 		"PIN_3",  /* GPIOX_17 */
 		"PIN_5",  /* GPIOX_18 */
 		"PIN_36"; /* GPIOX_19 */
 };

 &i2c3 {
 	status = "okay";
 	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
 	pinctrl-names = "default";

 	rtc: rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 		wakeup-source;
 	};
 };

 &ir {
 	status = "okay";
 	pinctrl-0 = <&remote_input_ao_pins>;
 	pinctrl-names = "default";
 	linux,rc-map-name = "rc-odroid";
 };

 /*
  * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR pins
  * and eMMC Data 4 to 7 pins.
  * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0,
  * and change bus-width to 4 then spifc can be enabled.
  * The SW1 slide should also be set to the correct position.
  */
 &spifc {
 	status = "disabled";
 	pinctrl-0 = <&nor_pins>;
 	pinctrl-names = "default";

 	mx25u64: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "mxicy,mx25u6435f", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <104000000>;
 	};
 };

 &toacodec {
 	status = "okay";
 };

 &usb {
 	vbus-supply = <&usb_pwr_en>;
 };

 &usb2_phy1 {
 	/* Enable the hub which is connected to this port */
 	phy-supply = <&hub_5v>;
 };
	// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
	/*
	* Copyright (c) 2019 BayLibre, SAS
	* Author: Neil Armstrong <narmstrong@baylibre.com>
	*/

	#include "meson-g12b-odroid.dtsi"

	/ {
	aliases {
	rtc0 = &rtc;
	};

	dio2133: audio-amplifier-0 {
	compatible = "simple-audio-amplifier";
	enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
	VCC-supply = <&vcc_5v>;
	sound-name-prefix = "U19";
	status = "okay";
	};

	hub_5v: regulator-hub-5v {
	compatible = "regulator-fixed";
	regulator-name = "HUB_5V";
	regulator-min-microvolt = <5000000>;
	regulator-max-microvolt = <5000000>;
	vin-supply = <&vcc_5v>;

	/* Connected to the Hub CHIPENABLE, LOW sets low power state */
	gpio = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
	enable-active-high;
	};

	/* USB hub supports both USB 2.0 and USB 3.0 root hub */
	usb-hub {
	dr_mode = "host";
	#address-cells = <1>;
	#size-cells = <0>;

	/* 2.0 hub on port 1 */
	hub_2_0: hub@1 {
	compatible = "usb5e3,610";
	reg = <1>;
	peer-hub = <&hub_3_0>;
	vdd-supply = <&usb_pwr_en>;
	};

	/* 3.0 hub on port 4 */
	hub_3_0: hub@2 {
	compatible = "usb5e3,620";
	reg = <2>;
	peer-hub = <&hub_2_0>;
	reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
	vdd-supply = <&vcc_5v>;
	};
	};

	sound {
	compatible = "amlogic,axg-sound-card";
	model = "ODROID-N2";
	audio-widgets = "Line", "Lineout";
	audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>,
	<&tdmin_b>, <&tdmin_c>, <&tdmin_lb>,
	<&dio2133>;
	audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
	"TDMOUT_B IN 1", "FRDDR_B OUT 1",
	"TDMOUT_B IN 2", "FRDDR_C OUT 1",
	"TDM_B Playback", "TDMOUT_B OUT",
	"TDMOUT_C IN 0", "FRDDR_A OUT 2",
	"TDMOUT_C IN 1", "FRDDR_B OUT 2",
	"TDMOUT_C IN 2", "FRDDR_C OUT 2",
	"TDM_C Playback", "TDMOUT_C OUT",
	"TDMIN_A IN 4", "TDM_B Loopback",
	"TDMIN_B IN 4", "TDM_B Loopback",
	"TDMIN_C IN 4", "TDM_B Loopback",
	"TDMIN_LB IN 1", "TDM_B Loopback",
	"TDMIN_A IN 5", "TDM_C Loopback",
	"TDMIN_B IN 5", "TDM_C Loopback",
	"TDMIN_C IN 5", "TDM_C Loopback",
	"TDMIN_LB IN 2", "TDM_C Loopback",
	"TODDR_A IN 0", "TDMIN_A OUT",
	"TODDR_B IN 0", "TDMIN_A OUT",
	"TODDR_C IN 0", "TDMIN_A OUT",
	"TODDR_A IN 1", "TDMIN_B OUT",
	"TODDR_B IN 1", "TDMIN_B OUT",
	"TODDR_C IN 1", "TDMIN_B OUT",
	"TODDR_A IN 2", "TDMIN_C OUT",
	"TODDR_B IN 2", "TDMIN_C OUT",
	"TODDR_C IN 2", "TDMIN_C OUT",
	"TODDR_A IN 6", "TDMIN_LB OUT",
	"TODDR_B IN 6", "TDMIN_LB OUT",
	"TODDR_C IN 6", "TDMIN_LB OUT",
	"U19 INL", "ACODEC LOLP",
	"U19 INR", "ACODEC LORP",
	"Lineout", "U19 OUTL",
	"Lineout", "U19 OUTR";

	assigned-clocks = <&clkc CLKID_MPLL2>,
	<&clkc CLKID_MPLL0>,
	<&clkc CLKID_MPLL1>;
	assigned-clock-parents = <0>, <0>, <0>;
	assigned-clock-rates = <294912000>,
	<270950400>,
	<393216000>;

	dai-link-0 {
	sound-dai = <&frddr_a>;
	};

	dai-link-1 {
	sound-dai = <&frddr_b>;
	};

	dai-link-2 {
	sound-dai = <&frddr_c>;
	};

	dai-link-3 {
	sound-dai = <&toddr_a>;
	};

	dai-link-4 {
	sound-dai = <&toddr_b>;
	};

	dai-link-5 {
	sound-dai = <&toddr_c>;
	};

	/* 8ch hdmi interface */
	dai-link-6 {
	sound-dai = <&tdmif_b>;
	dai-format = "i2s";
	dai-tdm-slot-tx-mask-0 = <1 1>;
	dai-tdm-slot-tx-mask-1 = <1 1>;
	dai-tdm-slot-tx-mask-2 = <1 1>;
	dai-tdm-slot-tx-mask-3 = <1 1>;
	mclk-fs = <256>;

	codec-0 {
	sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
	};

	codec-1 {
	sound-dai = <&toacodec TOACODEC_IN_B>;
	};
	};

	/* i2s jack output interface */
	dai-link-7 {
	sound-dai = <&tdmif_c>;
	dai-format = "i2s";
	dai-tdm-slot-tx-mask-0 = <1 1>;
	mclk-fs = <256>;

	codec-0 {
	sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
	};

	codec-1 {
	sound-dai = <&toacodec TOACODEC_IN_C>;
	};
	};

	/* hdmi glue */
	dai-link-8 {
	sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;

	codec {
	sound-dai = <&hdmi_tx>;
	};
	};

	/* acodec glue */
	dai-link-9 {
	sound-dai = <&toacodec TOACODEC_OUT>;

	codec {
	sound-dai = <&acodec>;
	};
	};
	};
	};

	&acodec {
	AVDD-supply = <&vddao_1v8>;
	status = "okay";
	};

	&ethmac {
	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
	pinctrl-names = "default";
	status = "okay";
	phy-mode = "rgmii";
	phy-handle = <&external_phy>;
	amlogic,tx-delay-ns = <2>;
	};

	&ext_mdio {
	external_phy: ethernet-phy@0 {
	/* Realtek RTL8211F (0x001cc916) */
	reg = <0>;
	max-speed = <1000>;

	reset-assert-us = <10000>;
	reset-deassert-us = <80000>;
	reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW \| GPIO_OPEN_DRAIN)>;

	interrupt-parent = <&gpio_intc>;
	/* MAC_INTR on GPIOZ_14 */
	interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
	};
	};

	&gpio {
	gpio-line-names =
	/* GPIOZ */
	"", "", "", "", "", "", "", "",
	"", "", "", "", "", "", "", "",
	/* GPIOH */
	"", "", "", "", "", "", "", "",
	"",
	/* BOOT */
	"", "", "", "", "", "", "", "",
	"", "", "", "", "", "", "", "",
	/* GPIOC */
	"", "", "", "", "", "", "", "",
	/* GPIOA */
	"PIN_44", /* GPIOA_0 */
	"PIN_46", /* GPIOA_1 */
	"PIN_45", /* GPIOA_2 */
	"PIN_47", /* GPIOA_3 */
	"PIN_26", /* GPIOA_4 */
	"", "", "", "", "", "",
	"PIN_42", /* GPIOA_11 */
	"PIN_32", /* GPIOA_12 */
	"PIN_7", /* GPIOA_13 */
	"PIN_27", /* GPIOA_14 */
	"PIN_28", /* GPIOA_15 */
	/* GPIOX */
	"PIN_16", /* GPIOX_0 */
	"PIN_18", /* GPIOX_1 */
	"PIN_22", /* GPIOX_2 */
	"PIN_11", /* GPIOX_3 */
	"PIN_13", /* GPIOX_4 */
	"PIN_33", /* GPIOX_5 */
	"PIN_35", /* GPIOX_6 */
	"PIN_15", /* GPIOX_7 */
	"PIN_19", /* GPIOX_8 */
	"PIN_21", /* GPIOX_9 */
	"PIN_24", /* GPIOX_10 */
	"PIN_23", /* GPIOX_11 */
	"PIN_8", /* GPIOX_12 */
	"PIN_10", /* GPIOX_13 */
	"PIN_29", /* GPIOX_14 */
	"PIN_31", /* GPIOX_15 */
	"PIN_12", /* GPIOX_16 */
	"PIN_3", /* GPIOX_17 */
	"PIN_5", /* GPIOX_18 */
	"PIN_36"; /* GPIOX_19 */
	};

	&i2c3 {
	status = "okay";
	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
	pinctrl-names = "default";

	rtc: rtc@51 {
	compatible = "nxp,pcf8563";
	reg = <0x51>;
	wakeup-source;
	};
	};

	&ir {
	status = "okay";
	pinctrl-0 = <&remote_input_ao_pins>;
	pinctrl-names = "default";
	linux,rc-map-name = "rc-odroid";
	};

	/*
	* EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR pins
	* and eMMC Data 4 to 7 pins.
	* Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0,
	* and change bus-width to 4 then spifc can be enabled.
	* The SW1 slide should also be set to the correct position.
	*/
	&spifc {
	status = "disabled";
	pinctrl-0 = <&nor_pins>;
	pinctrl-names = "default";

	mx25u64: flash@0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "mxicy,mx25u6435f", "jedec,spi-nor";
	reg = <0>;
	spi-max-frequency = <104000000>;
	};
	};

	&toacodec {
	status = "okay";
	};

	&usb {
	vbus-supply = <&usb_pwr_en>;
	};

	&usb2_phy1 {
	/* Enable the hub which is connected to this port */
	phy-supply = <&hub_5v>;
	};