| // SPDX-License-Identifier: GPL-2.0 |
| /dts-v1/; |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/clock/qcom,gcc-apq8084.h> |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| model = "Qualcomm APQ 8084"; |
| compatible = "qcom,apq8084"; |
| interrupt-parent = <&intc>; |
| |
| reserved-memory { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| smem_mem: smem_region@fa00000 { |
| reg = <0xfa00000 0x200000>; |
| no-map; |
| }; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "qcom,krait"; |
| reg = <0>; |
| enable-method = "qcom,kpss-acc-v2"; |
| next-level-cache = <&L2>; |
| qcom,acc = <&acc0>; |
| qcom,saw = <&saw0>; |
| cpu-idle-states = <&CPU_SPC>; |
| }; |
| |
| cpu@1 { |
| device_type = "cpu"; |
| compatible = "qcom,krait"; |
| reg = <1>; |
| enable-method = "qcom,kpss-acc-v2"; |
| next-level-cache = <&L2>; |
| qcom,acc = <&acc1>; |
| qcom,saw = <&saw1>; |
| cpu-idle-states = <&CPU_SPC>; |
| }; |
| |
| cpu@2 { |
| device_type = "cpu"; |
| compatible = "qcom,krait"; |
| reg = <2>; |
| enable-method = "qcom,kpss-acc-v2"; |
| next-level-cache = <&L2>; |
| qcom,acc = <&acc2>; |
| qcom,saw = <&saw2>; |
| cpu-idle-states = <&CPU_SPC>; |
| }; |
| |
| cpu@3 { |
| device_type = "cpu"; |
| compatible = "qcom,krait"; |
| reg = <3>; |
| enable-method = "qcom,kpss-acc-v2"; |
| next-level-cache = <&L2>; |
| qcom,acc = <&acc3>; |
| qcom,saw = <&saw3>; |
| cpu-idle-states = <&CPU_SPC>; |
| }; |
| |
| L2: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| qcom,saw = <&saw_l2>; |
| }; |
| |
| idle-states { |
| CPU_SPC: cpu-spc { |
| compatible = "qcom,idle-state-spc", |
| "arm,idle-state"; |
| entry-latency-us = <150>; |
| exit-latency-us = <200>; |
| min-residency-us = <2000>; |
| }; |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x0 0x0>; |
| }; |
| |
| firmware { |
| scm { |
| compatible = "qcom,scm-apq8084", "qcom,scm"; |
| clocks = <&gcc GCC_CE1_CLK> , <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; |
| clock-names = "core", "bus", "iface"; |
| }; |
| }; |
| |
| thermal-zones { |
| cpu0-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens 5>; |
| |
| trips { |
| cpu_alert0: trip0 { |
| temperature = <75000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| cpu_crit0: trip1 { |
| temperature = <110000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu1-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens 6>; |
| |
| trips { |
| cpu_alert1: trip0 { |
| temperature = <75000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| cpu_crit1: trip1 { |
| temperature = <110000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu2-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens 7>; |
| |
| trips { |
| cpu_alert2: trip0 { |
| temperature = <75000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| cpu_crit2: trip1 { |
| temperature = <110000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu3-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens 8>; |
| |
| trips { |
| cpu_alert3: trip0 { |
| temperature = <75000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| cpu_crit3: trip1 { |
| temperature = <110000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| }; |
| |
| cpu-pmu { |
| compatible = "qcom,krait-pmu"; |
| interrupts = <GIC_PPI 7 0xf04>; |
| }; |
| |
| clocks { |
| xo_board: xo_board { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <19200000>; |
| }; |
| |
| sleep_clk: sleep_clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv7-timer"; |
| interrupts = <GIC_PPI 2 0xf08>, |
| <GIC_PPI 3 0xf08>, |
| <GIC_PPI 4 0xf08>, |
| <GIC_PPI 1 0xf08>; |
| clock-frequency = <19200000>; |
| }; |
| |
| smem { |
| compatible = "qcom,smem"; |
| |
| qcom,rpm-msg-ram = <&rpm_msg_ram>; |
| memory-region = <&smem_mem>; |
| |
| hwlocks = <&tcsr_mutex 3>; |
| }; |
| |
| soc: soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| compatible = "simple-bus"; |
| |
| intc: interrupt-controller@f9000000 { |
| compatible = "qcom,msm-qgic2"; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| reg = <0xf9000000 0x1000>, |
| <0xf9002000 0x1000>; |
| }; |
| |
| apcs: syscon@f9011000 { |
| compatible = "syscon"; |
| reg = <0xf9011000 0x1000>; |
| }; |
| |
| sram@fc190000 { |
| compatible = "qcom,apq8084-rpm-stats"; |
| reg = <0xfc190000 0x10000>; |
| }; |
| |
| qfprom: efuse@fc4bc000 { |
| compatible = "qcom,apq8084-qfprom", "qcom,qfprom"; |
| reg = <0xfc4bc000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| tsens_base1: base1@d0 { |
| reg = <0xd0 0x1>; |
| bits = <0 8>; |
| }; |
| |
| tsens_s0_p1: s0-p1@d1 { |
| reg = <0xd1 0x1>; |
| bits = <0 6>; |
| }; |
| |
| tsens_s1_p1: s1-p1@d2 { |
| reg = <0xd1 0x2>; |
| bits = <6 6>; |
| }; |
| |
| tsens_s2_p1: s2-p1@d2 { |
| reg = <0xd2 0x2>; |
| bits = <4 6>; |
| }; |
| |
| tsens_s3_p1: s3-p1@d3 { |
| reg = <0xd3 0x1>; |
| bits = <2 6>; |
| }; |
| |
| tsens_s4_p1: s4-p1@d4 { |
| reg = <0xd4 0x1>; |
| bits = <0 6>; |
| }; |
| |
| tsens_s5_p1: s5-p1@d4 { |
| reg = <0xd4 0x2>; |
| bits = <6 6>; |
| }; |
| |
| tsens_s6_p1: s6-p1@d5 { |
| reg = <0xd5 0x2>; |
| bits = <4 6>; |
| }; |
| |
| tsens_s7_p1: s7-p1@d6 { |
| reg = <0xd6 0x1>; |
| bits = <2 6>; |
| }; |
| |
| tsens_s8_p1: s8-p1@d7 { |
| reg = <0xd7 0x1>; |
| bits = <0 6>; |
| }; |
| |
| tsens_mode: mode@d7 { |
| reg = <0xd7 0x1>; |
| bits = <6 2>; |
| }; |
| |
| tsens_s9_p1: s9-p1@d8 { |
| reg = <0xd8 0x1>; |
| bits = <0 6>; |
| }; |
| |
| tsens_s10_p1: s10_p1@d8 { |
| reg = <0xd8 0x2>; |
| bits = <6 6>; |
| }; |
| |
| tsens_base2: base2@d9 { |
| reg = <0xd9 0x2>; |
| bits = <4 8>; |
| }; |
| |
| tsens_s0_p2: s0-p2@da { |
| reg = <0xda 0x2>; |
| bits = <4 6>; |
| }; |
| |
| tsens_s1_p2: s1-p2@db { |
| reg = <0xdb 0x1>; |
| bits = <2 6>; |
| }; |
| |
| tsens_s2_p2: s2-p2@dc { |
| reg = <0xdc 0x1>; |
| bits = <0 6>; |
| }; |
| |
| tsens_s3_p2: s3-p2@dc { |
| reg = <0xdc 0x2>; |
| bits = <6 6>; |
| }; |
| |
| tsens_s4_p2: s4-p2@dd { |
| reg = <0xdd 0x2>; |
| bits = <4 6>; |
| }; |
| |
| tsens_s5_p2: s5-p2@de { |
| reg = <0xde 0x2>; |
| bits = <2 6>; |
| }; |
| |
| tsens_s6_p2: s6-p2@df { |
| reg = <0xdf 0x1>; |
| bits = <0 6>; |
| }; |
| |
| tsens_s7_p2: s7-p2@e0 { |
| reg = <0xe0 0x1>; |
| bits = <0 6>; |
| }; |
| |
| tsens_s8_p2: s8-p2@e0 { |
| reg = <0xe0 0x2>; |
| bits = <6 6>; |
| }; |
| |
| tsens_s9_p2: s9-p2@e1 { |
| reg = <0xe1 0x2>; |
| bits = <4 6>; |
| }; |
| |
| tsens_s10_p2: s10_p2@e2 { |
| reg = <0xe2 0x2>; |
| bits = <2 6>; |
| }; |
| |
| tsens_s5_p2_backup: s5-p2_backup@e3 { |
| reg = <0xe3 0x2>; |
| bits = <0 6>; |
| }; |
| |
| tsens_mode_backup: mode_backup@e3 { |
| reg = <0xe3 0x1>; |
| bits = <6 2>; |
| }; |
| |
| tsens_s6_p2_backup: s6-p2_backup@e4 { |
| reg = <0xe4 0x1>; |
| bits = <0 6>; |
| }; |
| |
| tsens_s7_p2_backup: s7-p2_backup@e4 { |
| reg = <0xe4 0x2>; |
| bits = <6 6>; |
| }; |
| |
| tsens_s8_p2_backup: s8-p2_backup@e5 { |
| reg = <0xe5 0x2>; |
| bits = <4 6>; |
| }; |
| |
| tsens_s9_p2_backup: s9-p2_backup@e6 { |
| reg = <0xe6 0x2>; |
| bits = <2 6>; |
| }; |
| |
| tsens_s10_p2_backup: s10_p2_backup@e7 { |
| reg = <0xe7 0x1>; |
| bits = <0 6>; |
| }; |
| |
| tsens_base1_backup: base1_backup@440 { |
| reg = <0x440 0x1>; |
| bits = <0 8>; |
| }; |
| |
| tsens_s0_p1_backup: s0-p1_backup@441 { |
| reg = <0x441 0x1>; |
| bits = <0 6>; |
| }; |
| |
| tsens_s1_p1_backup: s1-p1_backup@442 { |
| reg = <0x441 0x2>; |
| bits = <6 6>; |
| }; |
| |
| tsens_s2_p1_backup: s2-p1_backup@442 { |
| reg = <0x442 0x2>; |
| bits = <4 6>; |
| }; |
| |
| tsens_s3_p1_backup: s3-p1_backup@443 { |
| reg = <0x443 0x1>; |
| bits = <2 6>; |
| }; |
| |
| tsens_s4_p1_backup: s4-p1_backup@444 { |
| reg = <0x444 0x1>; |
| bits = <0 6>; |
| }; |
| |
| tsens_s5_p1_backup: s5-p1_backup@444 { |
| reg = <0x444 0x2>; |
| bits = <6 6>; |
| }; |
| |
| tsens_s6_p1_backup: s6-p1_backup@445 { |
| reg = <0x445 0x2>; |
| bits = <4 6>; |
| }; |
| |
| tsens_s7_p1_backup: s7-p1_backup@446 { |
| reg = <0x446 0x1>; |
| bits = <2 6>; |
| }; |
| |
| tsens_use_backup: use_backup@447 { |
| reg = <0x447 0x1>; |
| bits = <5 3>; |
| }; |
| |
| tsens_s8_p1_backup: s8-p1_backup@448 { |
| reg = <0x448 0x1>; |
| bits = <0 6>; |
| }; |
| |
| tsens_s9_p1_backup: s9-p1_backup@448 { |
| reg = <0x448 0x2>; |
| bits = <6 6>; |
| }; |
| |
| tsens_s10_p1_backup: s10_p1_backup@449 { |
| reg = <0x449 0x2>; |
| bits = <4 6>; |
| }; |
| |
| tsens_base2_backup: base2_backup@44a { |
| reg = <0x44a 0x2>; |
| bits = <2 8>; |
| }; |
| |
| tsens_s0_p2_backup: s0-p2_backup@44b { |
| reg = <0x44b 0x3>; |
| bits = <2 6>; |
| }; |
| |
| tsens_s1_p2_backup: s1-p2_backup@44c { |
| reg = <0x44c 0x1>; |
| bits = <0 6>; |
| }; |
| |
| tsens_s2_p2_backup: s2-p2_backup@44c { |
| reg = <0x44c 0x2>; |
| bits = <6 6>; |
| }; |
| |
| tsens_s3_p2_backup: s3-p2_backup@44d { |
| reg = <0x44d 0x2>; |
| bits = <4 6>; |
| }; |
| |
| tsens_s4_p2_backup: s4-p2_backup@44e { |
| reg = <0x44e 0x1>; |
| bits = <2 6>; |
| }; |
| }; |
| |
| tsens: thermal-sensor@fc4a9000 { |
| compatible = "qcom,msm8974-tsens", "qcom,tsens-v0_1"; |
| reg = <0xfc4a9000 0x1000>, /* TM */ |
| <0xfc4a8000 0x1000>; /* SROT */ |
| nvmem-cells = <&tsens_mode>, |
| <&tsens_base1>, <&tsens_base2>, |
| <&tsens_use_backup>, |
| <&tsens_mode_backup>, |
| <&tsens_base1_backup>, <&tsens_base2_backup>, |
| <&tsens_s0_p1>, <&tsens_s0_p2>, |
| <&tsens_s1_p1>, <&tsens_s1_p2>, |
| <&tsens_s2_p1>, <&tsens_s2_p2>, |
| <&tsens_s3_p1>, <&tsens_s3_p2>, |
| <&tsens_s4_p1>, <&tsens_s4_p2>, |
| <&tsens_s5_p1>, <&tsens_s5_p2>, |
| <&tsens_s6_p1>, <&tsens_s6_p2>, |
| <&tsens_s7_p1>, <&tsens_s7_p2>, |
| <&tsens_s8_p1>, <&tsens_s8_p2>, |
| <&tsens_s9_p1>, <&tsens_s9_p2>, |
| <&tsens_s10_p1>, <&tsens_s10_p2>, |
| <&tsens_s0_p1_backup>, <&tsens_s0_p2_backup>, |
| <&tsens_s1_p1_backup>, <&tsens_s1_p2_backup>, |
| <&tsens_s2_p1_backup>, <&tsens_s2_p2_backup>, |
| <&tsens_s3_p1_backup>, <&tsens_s3_p2_backup>, |
| <&tsens_s4_p1_backup>, <&tsens_s4_p2_backup>, |
| <&tsens_s5_p1_backup>, <&tsens_s5_p2_backup>, |
| <&tsens_s6_p1_backup>, <&tsens_s6_p2_backup>, |
| <&tsens_s7_p1_backup>, <&tsens_s7_p2_backup>, |
| <&tsens_s8_p1_backup>, <&tsens_s8_p2_backup>, |
| <&tsens_s9_p1_backup>, <&tsens_s9_p2_backup>, |
| <&tsens_s10_p1_backup>, <&tsens_s10_p2_backup>; |
| nvmem-cell-names = "mode", |
| "base1", "base2", |
| "use_backup", |
| "mode_backup", |
| "base1_backup", "base2_backup", |
| "s0_p1", "s0_p2", |
| "s1_p1", "s1_p2", |
| "s2_p1", "s2_p2", |
| "s3_p1", "s3_p2", |
| "s4_p1", "s4_p2", |
| "s5_p1", "s5_p2", |
| "s6_p1", "s6_p2", |
| "s7_p1", "s7_p2", |
| "s8_p1", "s8_p2", |
| "s9_p1", "s9_p2", |
| "s10_p1", "s10_p2", |
| "s0_p1_backup", "s0_p2_backup", |
| "s1_p1_backup", "s1_p2_backup", |
| "s2_p1_backup", "s2_p2_backup", |
| "s3_p1_backup", "s3_p2_backup", |
| "s4_p1_backup", "s4_p2_backup", |
| "s5_p1_backup", "s5_p2_backup", |
| "s6_p1_backup", "s6_p2_backup", |
| "s7_p1_backup", "s7_p2_backup", |
| "s8_p1_backup", "s8_p2_backup", |
| "s9_p1_backup", "s9_p2_backup", |
| "s10_p1_backup", "s10_p2_backup"; |
| #qcom,sensors = <11>; |
| interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "uplow"; |
| #thermal-sensor-cells = <1>; |
| }; |
| timer@f9020000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| compatible = "arm,armv7-timer-mem"; |
| reg = <0xf9020000 0x1000>; |
| clock-frequency = <19200000>; |
| |
| frame@f9021000 { |
| frame-number = <0>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xf9021000 0x1000>, |
| <0xf9022000 0x1000>; |
| }; |
| |
| frame@f9023000 { |
| frame-number = <1>; |
| interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xf9023000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@f9024000 { |
| frame-number = <2>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xf9024000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@f9025000 { |
| frame-number = <3>; |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xf9025000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@f9026000 { |
| frame-number = <4>; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xf9026000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@f9027000 { |
| frame-number = <5>; |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xf9027000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@f9028000 { |
| frame-number = <6>; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xf9028000 0x1000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| saw0: power-manager@f9089000 { |
| compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2"; |
| reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>; |
| }; |
| |
| saw1: power-manager@f9099000 { |
| compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2"; |
| reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>; |
| }; |
| |
| saw2: power-manager@f90a9000 { |
| compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2"; |
| reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>; |
| }; |
| |
| saw3: power-manager@f90b9000 { |
| compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2"; |
| reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>; |
| }; |
| |
| saw_l2: power-manager@f9012000 { |
| compatible = "qcom,apq8084-saw2-v2.1-l2", "qcom,saw2"; |
| reg = <0xf9012000 0x1000>; |
| }; |
| |
| acc0: power-manager@f9088000 { |
| compatible = "qcom,kpss-acc-v2"; |
| reg = <0xf9088000 0x1000>, |
| <0xf9008000 0x1000>; |
| }; |
| |
| acc1: power-manager@f9098000 { |
| compatible = "qcom,kpss-acc-v2"; |
| reg = <0xf9098000 0x1000>, |
| <0xf9008000 0x1000>; |
| }; |
| |
| acc2: power-manager@f90a8000 { |
| compatible = "qcom,kpss-acc-v2"; |
| reg = <0xf90a8000 0x1000>, |
| <0xf9008000 0x1000>; |
| }; |
| |
| acc3: power-manager@f90b8000 { |
| compatible = "qcom,kpss-acc-v2"; |
| reg = <0xf90b8000 0x1000>, |
| <0xf9008000 0x1000>; |
| }; |
| |
| restart@fc4ab000 { |
| compatible = "qcom,pshold"; |
| reg = <0xfc4ab000 0x4>; |
| }; |
| |
| gcc: clock-controller@fc400000 { |
| compatible = "qcom,gcc-apq8084"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| reg = <0xfc400000 0x4000>; |
| clocks = <&xo_board>, |
| <&sleep_clk>, |
| <0>, /* ufs */ |
| <0>, |
| <0>, |
| <0>, |
| <0>, /* sata */ |
| <0>, |
| <0>; /* pcie */ |
| clock-names = "xo", |
| "sleep_clk", |
| "ufs_rx_symbol_0_clk_src", |
| "ufs_rx_symbol_1_clk_src", |
| "ufs_tx_symbol_0_clk_src", |
| "ufs_tx_symbol_1_clk_src", |
| "sata_asic0_clk", |
| "sata_rx_clk", |
| "pcie_pipe"; |
| }; |
| |
| tcsr_mutex: hwlock@fd484000 { |
| compatible = "qcom,apq8084-tcsr-mutex", "qcom,tcsr-mutex"; |
| reg = <0xfd484000 0x1000>; |
| #hwlock-cells = <1>; |
| }; |
| |
| rpm_msg_ram: sram@fc428000 { |
| compatible = "qcom,rpm-msg-ram"; |
| reg = <0xfc428000 0x4000>; |
| }; |
| |
| tlmm: pinctrl@fd510000 { |
| compatible = "qcom,apq8084-pinctrl"; |
| reg = <0xfd510000 0x4000>; |
| gpio-controller; |
| gpio-ranges = <&tlmm 0 0 147>; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| blsp2_uart2: serial@f995e000 { |
| compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| reg = <0xf995e000 0x1000>; |
| interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; |
| clock-names = "core", "iface"; |
| status = "disabled"; |
| }; |
| |
| sdhc_1: mmc@f9824900 { |
| compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; |
| reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; |
| reg-names = "hc", "core"; |
| interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "hc_irq", "pwr_irq"; |
| clocks = <&gcc GCC_SDCC1_AHB_CLK>, |
| <&gcc GCC_SDCC1_APPS_CLK>, |
| <&xo_board>; |
| clock-names = "iface", "core", "xo"; |
| status = "disabled"; |
| }; |
| |
| sdhc_2: mmc@f98a4900 { |
| compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; |
| reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; |
| reg-names = "hc", "core"; |
| interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "hc_irq", "pwr_irq"; |
| clocks = <&gcc GCC_SDCC2_AHB_CLK>, |
| <&gcc GCC_SDCC2_APPS_CLK>, |
| <&xo_board>; |
| clock-names = "iface", "core", "xo"; |
| status = "disabled"; |
| }; |
| |
| spmi_bus: spmi@fc4cf000 { |
| compatible = "qcom,spmi-pmic-arb"; |
| reg-names = "core", "intr", "cnfg"; |
| reg = <0xfc4cf000 0x1000>, |
| <0xfc4cb000 0x1000>, |
| <0xfc4ca000 0x1000>; |
| interrupt-names = "periph_irq"; |
| interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; |
| qcom,ee = <0>; |
| qcom,channel = <0>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| interrupt-controller; |
| #interrupt-cells = <4>; |
| }; |
| }; |
| |
| rpm: remoteproc { |
| compatible = "qcom,apq8084-rpm-proc", "qcom,rpm-proc"; |
| |
| smd-edge { |
| interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; |
| qcom,ipc = <&apcs 8 0>; |
| qcom,smd-edge = <15>; |
| |
| rpm-requests { |
| compatible = "qcom,rpm-apq8084"; |
| qcom,smd-channels = "rpm_requests"; |
| |
| regulators-0 { |
| compatible = "qcom,rpm-pma8084-regulators"; |
| |
| pma8084_s1: s1 {}; |
| pma8084_s2: s2 {}; |
| pma8084_s3: s3 {}; |
| pma8084_s4: s4 {}; |
| pma8084_s5: s5 {}; |
| pma8084_s6: s6 {}; |
| pma8084_s7: s7 {}; |
| pma8084_s8: s8 {}; |
| pma8084_s9: s9 {}; |
| pma8084_s10: s10 {}; |
| pma8084_s11: s11 {}; |
| pma8084_s12: s12 {}; |
| |
| pma8084_l1: l1 {}; |
| pma8084_l2: l2 {}; |
| pma8084_l3: l3 {}; |
| pma8084_l4: l4 {}; |
| pma8084_l5: l5 {}; |
| pma8084_l6: l6 {}; |
| pma8084_l7: l7 {}; |
| pma8084_l8: l8 {}; |
| pma8084_l9: l9 {}; |
| pma8084_l10: l10 {}; |
| pma8084_l11: l11 {}; |
| pma8084_l12: l12 {}; |
| pma8084_l13: l13 {}; |
| pma8084_l14: l14 {}; |
| pma8084_l15: l15 {}; |
| pma8084_l16: l16 {}; |
| pma8084_l17: l17 {}; |
| pma8084_l18: l18 {}; |
| pma8084_l19: l19 {}; |
| pma8084_l20: l20 {}; |
| pma8084_l21: l21 {}; |
| pma8084_l22: l22 {}; |
| pma8084_l23: l23 {}; |
| pma8084_l24: l24 {}; |
| pma8084_l25: l25 {}; |
| pma8084_l26: l26 {}; |
| pma8084_l27: l27 {}; |
| |
| pma8084_lvs1: lvs1 {}; |
| pma8084_lvs2: lvs2 {}; |
| pma8084_lvs3: lvs3 {}; |
| pma8084_lvs4: lvs4 {}; |
| |
| pma8084_5vs1: 5vs1 {}; |
| }; |
| }; |
| }; |
| }; |
| }; |