dts/upstream/Bindings/iio/adc/adi,ad7380.yaml

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/adc/adi,ad7380.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Analog Devices Simultaneous Sampling Analog to Digital Converters

maintainers:
  - Michael Hennerich <Michael.Hennerich@analog.com>
  - Nuno Sá <nuno.sa@analog.com>

description: |
  * https://www.analog.com/en/products/ad7380.html
  * https://www.analog.com/en/products/ad7381.html
  * https://www.analog.com/en/products/ad7383.html
  * https://www.analog.com/en/products/ad7384.html
  * https://www.analog.com/en/products/ad7380-4.html
  * https://www.analog.com/en/products/ad7381-4.html
  * https://www.analog.com/en/products/ad7383-4.html
  * https://www.analog.com/en/products/ad7384-4.html

$ref: /schemas/spi/spi-peripheral-props.yaml#

properties:
  compatible:
    enum:
      - adi,ad7380
      - adi,ad7381
      - adi,ad7383
      - adi,ad7384
      - adi,ad7380-4
      - adi,ad7381-4
      - adi,ad7383-4
      - adi,ad7384-4

  reg:
    maxItems: 1

  spi-max-frequency:
    maximum: 80000000
  spi-cpol: true
  spi-cpha: true

  vcc-supply:
    description: A 3V to 3.6V supply that powers the chip.

  vlogic-supply:
    description:
      A 1.65V to 3.6V supply for the logic pins.

  refio-supply:
    description:
      A 2.5V to 3.3V supply for the external reference voltage. When omitted,
      the internal 2.5V reference is used.

  aina-supply:
    description:
      The common mode voltage supply for the AINA- pin on pseudo-differential
      chips.

  ainb-supply:
    description:
      The common mode voltage supply for the AINB- pin on pseudo-differential
      chips.

  ainc-supply:
    description:
      The common mode voltage supply for the AINC- pin on pseudo-differential
      chips.

  aind-supply:
    description:
      The common mode voltage supply for the AIND- pin on pseudo-differential
      chips.

  interrupts:
    description:
      When the device is using 1-wire mode, this property is used to optionally
      specify the ALERT interrupt.
    maxItems: 1

required:
  - compatible
  - reg
  - vcc-supply
  - vlogic-supply

unevaluatedProperties: false

allOf:
  # pseudo-differential chips require common mode voltage supplies,
  # true differential chips don't use them
  - if:
      properties:
        compatible:
          enum:
            - adi,ad7383
            - adi,ad7384
            - adi,ad7383-4
            - adi,ad7384-4
    then:
      required:
        - aina-supply
        - ainb-supply
    else:
      properties:
        aina-supply: false
        ainb-supply: false
  - if:
      properties:
        compatible:
          enum:
            - adi,ad7383-4
            - adi,ad7384-4
    then:
      required:
        - ainc-supply
        - aind-supply
    else:
      properties:
        ainc-supply: false
        aind-supply: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/irq.h>

    spi {
        #address-cells = <1>;
        #size-cells = <0>;

        adc@0 {
            compatible = "adi,ad7380";
            reg = <0>;

            spi-cpol;
            spi-cpha;
            spi-max-frequency = <80000000>;

            interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
            interrupt-parent = <&gpio0>;

            vcc-supply = <&supply_3_3V>;
            vlogic-supply = <&supply_3_3V>;
            refio-supply = <&supply_2_5V>;
        };
    };