| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/i2c/nvidia,tegra20-i2c.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| maintainers: |
| - Thierry Reding <thierry.reding@gmail.com> |
| - Jon Hunter <jonathanh@nvidia.com> |
| |
| title: NVIDIA Tegra I2C controller driver |
| |
| properties: |
| compatible: |
| oneOf: |
| - description: Tegra20 has 4 generic I2C controller. This can support |
| master and slave mode of I2C communication. The i2c-tegra driver |
| only support master mode of I2C communication. Driver of I2C |
| controller is only compatible with "nvidia,tegra20-i2c". |
| const: nvidia,tegra20-i2c |
| - description: Tegra20 has specific I2C controller called as DVC I2C |
| controller. This only support master mode of I2C communication. |
| Register interface/offset and interrupts handling are different than |
| generic I2C controller. Driver of DVC I2C controller is only |
| compatible with "nvidia,tegra20-i2c-dvc". |
| const: nvidia,tegra20-i2c-dvc |
| - description: | |
| Tegra30 has 5 generic I2C controller. This controller is very much |
| similar to Tegra20 I2C controller with additional feature: Continue |
| Transfer Support. This feature helps to implement M_NO_START as per |
| I2C core API transfer flags. Driver of I2C controller is compatible |
| with "nvidia,tegra30-i2c" to enable the continue transfer support. |
| This is also compatible with "nvidia,tegra20-i2c" without continue |
| transfer support. |
| items: |
| - const: nvidia,tegra30-i2c |
| - const: nvidia,tegra20-i2c |
| - description: | |
| Tegra114 has 5 generic I2C controllers. This controller is very much |
| similar to Tegra30 I2C controller with some hardware modification: |
| - Tegra30/Tegra20 I2C controller has 2 clock source called div-clk |
| and fast-clk. Tegra114 has only one clock source called as |
| div-clk and hence clock mechanism is changed in I2C controller. |
| - Tegra30/Tegra20 I2C controller has enabled per packet transfer |
| by default and there is no way to disable it. Tegra114 has this |
| interrupt disable by default and SW need to enable explicitly. |
| Due to above changes, Tegra114 I2C driver makes incompatible with |
| previous hardware driver. Hence, Tegra114 I2C controller is |
| compatible with "nvidia,tegra114-i2c". |
| const: nvidia,tegra114-i2c |
| - description: | |
| Tegra124 has 6 generic I2C controllers. These controllers are very |
| similar to those found on Tegra114 but also contain several hardware |
| improvements and new registers. |
| const: nvidia,tegra124-i2c |
| - description: | |
| Tegra210 has 6 generic I2C controllers. These controllers are very |
| similar to those found on Tegra124. |
| items: |
| - const: nvidia,tegra210-i2c |
| - const: nvidia,tegra124-i2c |
| - description: | |
| Tegra210 has one I2C controller that is on host1x bus and is part of |
| the VE power domain and typically used for camera use-cases. This VI |
| I2C controller is mostly compatible with the programming model of |
| the regular I2C controllers with a few exceptions. The I2C registers |
| start at an offset of 0xc00 (instead of 0), registers are 16 bytes |
| apart (rather than 4) and the controller does not support slave |
| mode. |
| const: nvidia,tegra210-i2c-vi |
| - description: | |
| Tegra186 has 9 generic I2C controllers, two of which are in the AON |
| (always-on) partition of the SoC. All of these controllers are very |
| similar to those found on Tegra210. |
| const: nvidia,tegra186-i2c |
| - description: | |
| Tegra194 has 8 generic I2C controllers, two of which are in the AON |
| (always-on) partition of the SoC. All of these controllers are very |
| similar to those found on Tegra186. However, these controllers have |
| support for 64 KiB transactions whereas earlier chips supported no |
| more than 4 KiB per transactions. |
| const: nvidia,tegra194-i2c |
| |
| reg: |
| maxItems: 1 |
| |
| interrupts: |
| maxItems: 1 |
| |
| clocks: |
| minItems: 1 |
| maxItems: 2 |
| |
| clock-names: |
| minItems: 1 |
| maxItems: 2 |
| |
| resets: |
| items: |
| - description: module reset |
| |
| reset-names: |
| items: |
| - const: i2c |
| |
| dmas: |
| items: |
| - description: DMA channel for the reception FIFO |
| - description: DMA channel for the transmission FIFO |
| |
| dma-names: |
| items: |
| - const: rx |
| - const: tx |
| |
| allOf: |
| - $ref: /schemas/i2c/i2c-controller.yaml |
| - if: |
| properties: |
| compatible: |
| contains: |
| enum: |
| - nvidia,tegra20-i2c |
| - nvidia,tegra30-i2c |
| then: |
| properties: |
| clock-names: |
| items: |
| - const: div-clk |
| - const: fast-clk |
| |
| - if: |
| properties: |
| compatible: |
| contains: |
| const: nvidia,tegra114-i2c |
| then: |
| properties: |
| clock-names: |
| items: |
| - const: div-clk |
| |
| - if: |
| properties: |
| compatible: |
| contains: |
| const: nvidia,tegra210-i2c |
| then: |
| properties: |
| clock-names: |
| items: |
| - const: div-clk |
| |
| - if: |
| properties: |
| compatible: |
| contains: |
| const: nvidia,tegra210-i2c-vi |
| then: |
| properties: |
| clock-names: |
| items: |
| - const: div-clk |
| - const: slow |
| power-domains: |
| items: |
| - description: phandle to the VENC power domain |
| |
| unevaluatedProperties: false |
| |
| examples: |
| - | |
| i2c@7000c000 { |
| compatible = "nvidia,tegra20-i2c"; |
| reg = <0x7000c000 0x100>; |
| interrupts = <0 38 0x04>; |
| clocks = <&tegra_car 12>, <&tegra_car 124>; |
| clock-names = "div-clk", "fast-clk"; |
| resets = <&tegra_car 12>; |
| reset-names = "i2c"; |
| dmas = <&apbdma 16>, <&apbdma 16>; |
| dma-names = "rx", "tx"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |