| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2015-2019 Toradex, Inc. |
| * |
| * Based on vf610twr.c: |
| * Copyright 2013 Freescale Semiconductor, Inc. |
| */ |
| |
| #include <common.h> |
| #include <init.h> |
| #include <asm/global_data.h> |
| |
| #include <asm/arch/clock.h> |
| #include <asm/arch/crm_regs.h> |
| #include <asm/arch/ddrmc-vf610.h> |
| #include <asm/arch/imx-regs.h> |
| #include <asm/arch/iomux-vf610.h> |
| #include <asm/gpio.h> |
| #include <asm/io.h> |
| #include <env.h> |
| #include <fdt_support.h> |
| #include <fsl_dcu_fb.h> |
| #include <g_dnl.h> |
| #include <jffs2/load_kernel.h> |
| #include <mtd_node.h> |
| #include <usb.h> |
| |
| #include "../common/tdx-common.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define PTC0_GPIO_45 45 |
| |
| static struct ddrmc_cr_setting colibri_vf_cr_settings[] = { |
| { DDRMC_CR79_CTLUPD_AREF(1), 79 }, |
| /* sets manual values for read lvl. (gate) delay of data slice 0/1 */ |
| { DDRMC_CR105_RDLVL_DL_0(28), 105 }, |
| { DDRMC_CR106_RDLVL_GTDL_0(24), 106 }, |
| { DDRMC_CR110_RDLVL_DL_1(28) | DDRMC_CR110_RDLVL_GTDL_1(24), 110 }, |
| { DDRMC_CR102_RDLVL_GT_REGEN | DDRMC_CR102_RDLVL_REG_EN, 102 }, |
| |
| /* AXI */ |
| { DDRMC_CR117_AXI0_W_PRI(0) | DDRMC_CR117_AXI0_R_PRI(0), 117 }, |
| { DDRMC_CR118_AXI1_W_PRI(1) | DDRMC_CR118_AXI1_R_PRI(1), 118 }, |
| { DDRMC_CR120_AXI0_PRI1_RPRI(2) | |
| DDRMC_CR120_AXI0_PRI0_RPRI(2), 120 }, |
| { DDRMC_CR121_AXI0_PRI3_RPRI(2) | |
| DDRMC_CR121_AXI0_PRI2_RPRI(2), 121 }, |
| { DDRMC_CR122_AXI1_PRI1_RPRI(1) | DDRMC_CR122_AXI1_PRI0_RPRI(1) | |
| DDRMC_CR122_AXI0_PRIRLX(100), 122 }, |
| { DDRMC_CR123_AXI1_P_ODR_EN | DDRMC_CR123_AXI1_PRI3_RPRI(1) | |
| DDRMC_CR123_AXI1_PRI2_RPRI(1), 123 }, |
| { DDRMC_CR124_AXI1_PRIRLX(100), 124 }, |
| { DDRMC_CR126_PHY_RDLAT(8), 126 }, |
| { DDRMC_CR132_WRLAT_ADJ(5) | |
| DDRMC_CR132_RDLAT_ADJ(6), 132 }, |
| { DDRMC_CR137_PHYCTL_DL(2), 137 }, |
| { DDRMC_CR138_PHY_WRLV_MXDL(256) | |
| DDRMC_CR138_PHYDRAM_CK_EN(1), 138 }, |
| { DDRMC_CR139_PHY_WRLV_RESPLAT(4) | DDRMC_CR139_PHY_WRLV_LOAD(7) | |
| DDRMC_CR139_PHY_WRLV_DLL(3) | |
| DDRMC_CR139_PHY_WRLV_EN(3), 139 }, |
| { DDRMC_CR140_PHY_WRLV_WW(64), 140 }, |
| { DDRMC_CR143_RDLV_GAT_MXDL(1536) | |
| DDRMC_CR143_RDLV_MXDL(128), 143 }, |
| { DDRMC_CR144_PHY_RDLVL_RES(4) | DDRMC_CR144_PHY_RDLV_LOAD(7) | |
| DDRMC_CR144_PHY_RDLV_DLL(3) | |
| DDRMC_CR144_PHY_RDLV_EN(3), 144 }, |
| { DDRMC_CR145_PHY_RDLV_RR(64), 145 }, |
| { DDRMC_CR146_PHY_RDLVL_RESP(64), 146 }, |
| { DDRMC_CR147_RDLV_RESP_MASK(983040), 147 }, |
| { DDRMC_CR148_RDLV_GATE_RESP_MASK(983040), 148 }, |
| { DDRMC_CR151_RDLV_GAT_DQ_ZERO_CNT(1) | |
| DDRMC_CR151_RDLVL_DQ_ZERO_CNT(1), 151 }, |
| |
| { DDRMC_CR154_PAD_ZQ_EARLY_CMP_EN_TIMER(13) | |
| DDRMC_CR154_PAD_ZQ_MODE(1) | |
| DDRMC_CR154_DDR_SEL_PAD_CONTR(3) | |
| DDRMC_CR154_PAD_ZQ_HW_FOR(1), 154 }, |
| { DDRMC_CR155_PAD_ODT_BYTE1(2) | DDRMC_CR155_PAD_ODT_BYTE0(2), 155 }, |
| { DDRMC_CR158_TWR(6), 158 }, |
| { DDRMC_CR161_ODT_EN(1) | DDRMC_CR161_TODTH_RD(2) | |
| DDRMC_CR161_TODTH_WR(2), 161 }, |
| /* end marker */ |
| { 0, -1 } |
| }; |
| |
| int dram_init(void) |
| { |
| static const struct ddr3_jedec_timings timings = { |
| .tinit = 5, |
| .trst_pwron = 80000, |
| .cke_inactive = 200000, |
| .wrlat = 5, |
| .caslat_lin = 12, |
| .trc = 21, |
| .trrd = 4, |
| .tccd = 4, |
| .tbst_int_interval = 0, |
| .tfaw = 20, |
| .trp = 6, |
| .twtr = 4, |
| .tras_min = 15, |
| .tmrd = 4, |
| .trtp = 4, |
| .tras_max = 28080, |
| .tmod = 12, |
| .tckesr = 4, |
| .tcke = 3, |
| .trcd_int = 6, |
| .tras_lockout = 0, |
| .tdal = 12, |
| .bstlen = 3, |
| .tdll = 512, /* not applicable since freq. scaling |
| * is not used |
| */ |
| .trp_ab = 6, |
| .tref = 3120, |
| .trfc = 64, |
| .tref_int = 0, |
| .tpdex = 3, |
| .txpdll = 10, |
| .txsnr = 68, /* changed to conform to JEDEC |
| * specifications |
| */ |
| .txsr = 506, /* changed to conform to JEDEC |
| * specifications |
| */ |
| .cksrx = 5, |
| .cksre = 5, |
| .freq_chg_en = 0, |
| .zqcl = 256, |
| .zqinit = 512, |
| .zqcs = 64, |
| .ref_per_zq = 64, |
| .zqcs_rotate = 0, |
| .aprebit = 10, |
| .cmd_age_cnt = 64, |
| .age_cnt = 64, |
| .q_fullness = 7, |
| .odt_rd_mapcs0 = 0, |
| .odt_wr_mapcs0 = 1, |
| .wlmrd = 40, |
| .wldqsen = 25, |
| }; |
| |
| ddrmc_ctrl_init_ddr3(&timings, colibri_vf_cr_settings, NULL, 1, 2); |
| gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_VYBRID_GPIO |
| static void setup_iomux_gpio(void) |
| { |
| static const iomux_v3_cfg_t gpio_pads[] = { |
| VF610_PAD_PTA17__GPIO_7, |
| VF610_PAD_PTA20__GPIO_10, |
| VF610_PAD_PTA21__GPIO_11, |
| VF610_PAD_PTA30__GPIO_20, |
| VF610_PAD_PTA31__GPIO_21, |
| VF610_PAD_PTB0__GPIO_22, |
| VF610_PAD_PTB1__GPIO_23, |
| VF610_PAD_PTB6__GPIO_28, |
| VF610_PAD_PTB7__GPIO_29, |
| VF610_PAD_PTB8__GPIO_30, |
| VF610_PAD_PTB9__GPIO_31, |
| VF610_PAD_PTB12__GPIO_34, |
| VF610_PAD_PTB13__GPIO_35, |
| VF610_PAD_PTB16__GPIO_38, |
| VF610_PAD_PTB17__GPIO_39, |
| VF610_PAD_PTB18__GPIO_40, |
| VF610_PAD_PTB21__GPIO_43, |
| VF610_PAD_PTB22__GPIO_44, |
| VF610_PAD_PTC0__GPIO_45, |
| VF610_PAD_PTC1__GPIO_46, |
| VF610_PAD_PTC2__GPIO_47, |
| VF610_PAD_PTC3__GPIO_48, |
| VF610_PAD_PTC4__GPIO_49, |
| VF610_PAD_PTC5__GPIO_50, |
| VF610_PAD_PTC6__GPIO_51, |
| VF610_PAD_PTC7__GPIO_52, |
| VF610_PAD_PTC8__GPIO_53, |
| VF610_PAD_PTD31__GPIO_63, |
| VF610_PAD_PTD30__GPIO_64, |
| VF610_PAD_PTD29__GPIO_65, |
| VF610_PAD_PTD28__GPIO_66, |
| VF610_PAD_PTD27__GPIO_67, |
| VF610_PAD_PTD26__GPIO_68, |
| VF610_PAD_PTD25__GPIO_69, |
| VF610_PAD_PTD24__GPIO_70, |
| VF610_PAD_PTD9__GPIO_88, |
| VF610_PAD_PTD10__GPIO_89, |
| VF610_PAD_PTD11__GPIO_90, |
| VF610_PAD_PTD12__GPIO_91, |
| VF610_PAD_PTD13__GPIO_92, |
| VF610_PAD_PTB23__GPIO_93, |
| VF610_PAD_PTB26__GPIO_96, |
| VF610_PAD_PTB28__GPIO_98, |
| VF610_PAD_PTC30__GPIO_103, |
| VF610_PAD_PTA7__GPIO_134, |
| }; |
| |
| imx_iomux_v3_setup_multiple_pads(gpio_pads, ARRAY_SIZE(gpio_pads)); |
| } |
| #endif |
| |
| #ifdef CONFIG_VIDEO_FSL_DCU_FB |
| static void setup_iomux_fsl_dcu(void) |
| { |
| static const iomux_v3_cfg_t dcu0_pads[] = { |
| VF610_PAD_PTE0__DCU0_HSYNC, |
| VF610_PAD_PTE1__DCU0_VSYNC, |
| VF610_PAD_PTE2__DCU0_PCLK, |
| VF610_PAD_PTE4__DCU0_DE, |
| VF610_PAD_PTE5__DCU0_R0, |
| VF610_PAD_PTE6__DCU0_R1, |
| VF610_PAD_PTE7__DCU0_R2, |
| VF610_PAD_PTE8__DCU0_R3, |
| VF610_PAD_PTE9__DCU0_R4, |
| VF610_PAD_PTE10__DCU0_R5, |
| VF610_PAD_PTE11__DCU0_R6, |
| VF610_PAD_PTE12__DCU0_R7, |
| VF610_PAD_PTE13__DCU0_G0, |
| VF610_PAD_PTE14__DCU0_G1, |
| VF610_PAD_PTE15__DCU0_G2, |
| VF610_PAD_PTE16__DCU0_G3, |
| VF610_PAD_PTE17__DCU0_G4, |
| VF610_PAD_PTE18__DCU0_G5, |
| VF610_PAD_PTE19__DCU0_G6, |
| VF610_PAD_PTE20__DCU0_G7, |
| VF610_PAD_PTE21__DCU0_B0, |
| VF610_PAD_PTE22__DCU0_B1, |
| VF610_PAD_PTE23__DCU0_B2, |
| VF610_PAD_PTE24__DCU0_B3, |
| VF610_PAD_PTE25__DCU0_B4, |
| VF610_PAD_PTE26__DCU0_B5, |
| VF610_PAD_PTE27__DCU0_B6, |
| VF610_PAD_PTE28__DCU0_B7, |
| }; |
| |
| imx_iomux_v3_setup_multiple_pads(dcu0_pads, ARRAY_SIZE(dcu0_pads)); |
| } |
| |
| static void setup_tcon(void) |
| { |
| setbits_le32(TCON0_BASE_ADDR, (1 << 29)); |
| } |
| #endif |
| |
| static inline int is_colibri_vf61(void) |
| { |
| struct mscm *mscm = (struct mscm *)MSCM_BASE_ADDR; |
| |
| /* |
| * Detect board type by Level 2 Cache: VF50 don't have any |
| * Level 2 Cache. |
| */ |
| return !!mscm->cpxcfg1; |
| } |
| |
| static void clock_init(void) |
| { |
| struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR; |
| struct anadig_reg *anadig = (struct anadig_reg *)ANADIG_BASE_ADDR; |
| u32 pfd_clk_sel, ddr_clk_sel; |
| |
| clrsetbits_le32(&ccm->ccgr0, CCM_REG_CTRL_MASK, |
| CCM_CCGR0_UART0_CTRL_MASK); |
| #ifdef CONFIG_FSL_DSPI |
| setbits_le32(&ccm->ccgr0, CCM_CCGR0_DSPI1_CTRL_MASK); |
| #endif |
| clrsetbits_le32(&ccm->ccgr1, CCM_REG_CTRL_MASK, |
| CCM_CCGR1_PIT_CTRL_MASK | CCM_CCGR1_WDOGA5_CTRL_MASK); |
| clrsetbits_le32(&ccm->ccgr2, CCM_REG_CTRL_MASK, |
| CCM_CCGR2_IOMUXC_CTRL_MASK | CCM_CCGR2_PORTA_CTRL_MASK | |
| CCM_CCGR2_PORTB_CTRL_MASK | CCM_CCGR2_PORTC_CTRL_MASK | |
| CCM_CCGR2_PORTD_CTRL_MASK | CCM_CCGR2_PORTE_CTRL_MASK); |
| clrsetbits_le32(&ccm->ccgr3, CCM_REG_CTRL_MASK, |
| CCM_CCGR3_ANADIG_CTRL_MASK | CCM_CCGR3_SCSC_CTRL_MASK); |
| clrsetbits_le32(&ccm->ccgr4, CCM_REG_CTRL_MASK, |
| CCM_CCGR4_WKUP_CTRL_MASK | CCM_CCGR4_CCM_CTRL_MASK | |
| CCM_CCGR4_GPC_CTRL_MASK); |
| clrsetbits_le32(&ccm->ccgr6, CCM_REG_CTRL_MASK, |
| CCM_CCGR6_OCOTP_CTRL_MASK | CCM_CCGR6_DDRMC_CTRL_MASK); |
| clrsetbits_le32(&ccm->ccgr7, CCM_REG_CTRL_MASK, |
| CCM_CCGR7_SDHC1_CTRL_MASK); |
| clrsetbits_le32(&ccm->ccgr9, CCM_REG_CTRL_MASK, |
| CCM_CCGR9_FEC0_CTRL_MASK | CCM_CCGR9_FEC1_CTRL_MASK); |
| clrsetbits_le32(&ccm->ccgr10, CCM_REG_CTRL_MASK, |
| CCM_CCGR10_NFC_CTRL_MASK); |
| |
| #ifdef CONFIG_USB_EHCI_VF |
| setbits_le32(&ccm->ccgr1, CCM_CCGR1_USBC0_CTRL_MASK); |
| setbits_le32(&ccm->ccgr7, CCM_CCGR7_USBC1_CTRL_MASK); |
| |
| clrsetbits_le32(&anadig->pll3_ctrl, ANADIG_PLL3_CTRL_BYPASS | |
| ANADIG_PLL3_CTRL_POWERDOWN | |
| ANADIG_PLL3_CTRL_DIV_SELECT, |
| ANADIG_PLL3_CTRL_ENABLE); |
| clrsetbits_le32(&anadig->pll7_ctrl, ANADIG_PLL7_CTRL_BYPASS | |
| ANADIG_PLL7_CTRL_POWERDOWN | |
| ANADIG_PLL7_CTRL_DIV_SELECT, |
| ANADIG_PLL7_CTRL_ENABLE); |
| #endif |
| |
| clrsetbits_le32(&anadig->pll5_ctrl, ANADIG_PLL5_CTRL_BYPASS | |
| ANADIG_PLL5_CTRL_POWERDOWN, ANADIG_PLL5_CTRL_ENABLE | |
| ANADIG_PLL5_CTRL_DIV_SELECT); |
| |
| if (is_colibri_vf61()) { |
| clrsetbits_le32(&anadig->pll2_ctrl, ANADIG_PLL5_CTRL_BYPASS | |
| ANADIG_PLL2_CTRL_POWERDOWN, |
| ANADIG_PLL2_CTRL_ENABLE | |
| ANADIG_PLL2_CTRL_DIV_SELECT); |
| } |
| |
| clrsetbits_le32(&anadig->pll1_ctrl, ANADIG_PLL1_CTRL_POWERDOWN, |
| ANADIG_PLL1_CTRL_ENABLE | ANADIG_PLL1_CTRL_DIV_SELECT); |
| |
| clrsetbits_le32(&ccm->ccr, CCM_CCR_OSCNT_MASK, |
| CCM_CCR_FIRC_EN | CCM_CCR_OSCNT(5)); |
| |
| /* See "Typical PLL Configuration" */ |
| if (is_colibri_vf61()) { |
| pfd_clk_sel = CCM_CCSR_PLL1_PFD_CLK_SEL(1); |
| ddr_clk_sel = CCM_CCSR_DDRC_CLK_SEL(0); |
| } else { |
| pfd_clk_sel = CCM_CCSR_PLL1_PFD_CLK_SEL(3); |
| ddr_clk_sel = CCM_CCSR_DDRC_CLK_SEL(1); |
| } |
| |
| clrsetbits_le32(&ccm->ccsr, CCM_REG_CTRL_MASK, pfd_clk_sel | |
| CCM_CCSR_PLL2_PFD4_EN | CCM_CCSR_PLL2_PFD3_EN | |
| CCM_CCSR_PLL2_PFD2_EN | CCM_CCSR_PLL2_PFD1_EN | |
| CCM_CCSR_PLL1_PFD4_EN | CCM_CCSR_PLL1_PFD3_EN | |
| CCM_CCSR_PLL1_PFD2_EN | CCM_CCSR_PLL1_PFD1_EN | |
| ddr_clk_sel | CCM_CCSR_FAST_CLK_SEL(1) | |
| CCM_CCSR_SYS_CLK_SEL(4)); |
| |
| clrsetbits_le32(&ccm->cacrr, CCM_REG_CTRL_MASK, |
| CCM_CACRR_IPG_CLK_DIV(1) | CCM_CACRR_BUS_CLK_DIV(2) | |
| CCM_CACRR_ARM_CLK_DIV(0)); |
| clrsetbits_le32(&ccm->cscmr1, CCM_REG_CTRL_MASK, |
| CCM_CSCMR1_ESDHC1_CLK_SEL(3) | |
| CCM_CSCMR1_NFC_CLK_SEL(0)); |
| clrsetbits_le32(&ccm->cscdr1, CCM_REG_CTRL_MASK, |
| CCM_CSCDR1_RMII_CLK_EN); |
| clrsetbits_le32(&ccm->cscdr2, CCM_REG_CTRL_MASK, |
| CCM_CSCDR2_ESDHC1_EN | CCM_CSCDR2_ESDHC1_CLK_DIV(0) | |
| CCM_CSCDR2_NFC_EN); |
| clrsetbits_le32(&ccm->cscdr3, CCM_REG_CTRL_MASK, |
| CCM_CSCDR3_NFC_PRE_DIV(3)); |
| clrsetbits_le32(&ccm->cscmr2, CCM_REG_CTRL_MASK, |
| CCM_CSCMR2_RMII_CLK_SEL(2)); |
| |
| #ifdef CONFIG_VIDEO_FSL_DCU_FB |
| setbits_le32(&ccm->ccgr1, CCM_CCGR1_TCON0_CTRL_MASK); |
| setbits_le32(&ccm->ccgr3, CCM_CCGR3_DCU0_CTRL_MASK); |
| #endif |
| } |
| |
| static void mscm_init(void) |
| { |
| struct mscm_ir *mscmir = (struct mscm_ir *)MSCM_IR_BASE_ADDR; |
| int i; |
| |
| for (i = 0; i < MSCM_IRSPRC_NUM; i++) |
| writew(MSCM_IRSPRC_CP0_EN, &mscmir->irsprc[i]); |
| } |
| |
| int board_early_init_f(void) |
| { |
| clock_init(); |
| mscm_init(); |
| |
| #ifdef CONFIG_VYBRID_GPIO |
| setup_iomux_gpio(); |
| #endif |
| |
| #ifdef CONFIG_VIDEO_FSL_DCU_FB |
| setup_tcon(); |
| setup_iomux_fsl_dcu(); |
| #endif |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_BOARD_LATE_INIT |
| int board_late_init(void) |
| { |
| struct src *src = (struct src *)SRC_BASE_ADDR; |
| |
| if (((src->sbmr2 & SRC_SBMR2_BMOD_MASK) >> SRC_SBMR2_BMOD_SHIFT) |
| == SRC_SBMR2_BMOD_SERIAL) { |
| printf("Serial Downloader recovery mode, disable autoboot\n"); |
| env_set("bootdelay", "-1"); |
| } |
| |
| return 0; |
| } |
| #endif /* CONFIG_BOARD_LATE_INIT */ |
| |
| int board_init(void) |
| { |
| struct scsc_reg *scsc = (struct scsc_reg *)SCSC_BASE_ADDR; |
| |
| /* address of boot parameters */ |
| gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; |
| |
| /* |
| * Enable external 32K Oscillator |
| * |
| * The internal clock experiences significant drift |
| * so we must use the external oscillator in order |
| * to maintain correct time in the hwclock |
| */ |
| setbits_le32(&scsc->sosc_ctr, SCSC_SOSC_CTR_SOSC_EN); |
| |
| return 0; |
| } |
| |
| int checkboard(void) |
| { |
| if (is_colibri_vf61()) |
| puts("Model: Toradex Colibri VF61\n"); |
| else |
| puts("Model: Toradex Colibri VF50\n"); |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) |
| int ft_board_setup(void *blob, struct bd_info *bd) |
| { |
| #if defined(CONFIG_VIDEO_FSL_DCU_FB) && !defined(CONFIG_DM_VIDEO) |
| int ret = 0; |
| #endif |
| #ifdef CONFIG_FDT_FIXUP_PARTITIONS |
| static const struct node_info nodes[] = { |
| { "fsl,vf610-nfc", MTD_DEV_TYPE_NAND, }, /* NAND flash */ |
| }; |
| |
| /* Update partition nodes using info from mtdparts env var */ |
| puts(" Updating MTD partitions...\n"); |
| fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes)); |
| #endif |
| #if defined(CONFIG_VIDEO_FSL_DCU_FB) && !defined(CONFIG_DM_VIDEO) |
| ret = fsl_dcu_fixedfb_setup(blob); |
| if (ret) |
| return ret; |
| #endif |
| |
| return ft_common_board_setup(blob, bd); |
| } |
| #endif |
| |
| /* |
| * Backlight off before OS handover |
| */ |
| void board_preboot_os(void) |
| { |
| gpio_request(PTC0_GPIO_45, "BL_ON"); |
| gpio_direction_output(PTC0_GPIO_45, 0); |
| } |