include/configs/bfin_adi_common.h - filogic/uboot - Gitiles

 /*
  * U-Boot - Common settings for Analog Devices boards
  */

 #ifndef __CONFIG_BFIN_ADI_COMMON_H__
 #define __CONFIG_BFIN_ADI_COMMON_H__

 /*
  * Command Settings
  */
 #ifndef _CONFIG_CMD_DEFAULT_H
 # include <config_cmd_default.h>
 # ifdef ADI_CMDS_NETWORK
 #  define CONFIG_CMD_DHCP
 #  define CONFIG_BOOTP_SUBNETMASK
 #  define CONFIG_BOOTP_GATEWAY
 #  define CONFIG_BOOTP_DNS
 #  define CONFIG_BOOTP_NTPSERVER
 #  define CONFIG_BOOTP_RANDOM_DELAY
 #  define CONFIG_KEEP_SERVERADDR
 #  define CONFIG_CMD_DNS
 #  define CONFIG_CMD_PING
 #  ifdef CONFIG_BFIN_MAC
 #   define CONFIG_CMD_MII
 #  endif
 # else
 #  undef CONFIG_CMD_BOOTD
 #  undef CONFIG_CMD_NET
 #  undef CONFIG_CMD_NFS
 # endif
 # ifdef CONFIG_LIBATA
 #  define CONFIG_CMD_FAT
 #  define CONFIG_CMD_SATA
 #  define CONFIG_DOS_PARTITION
 # endif
 # ifdef CONFIG_MMC
 #  define CONFIG_CMD_EXT2
 #  define CONFIG_CMD_FAT
 #  define CONFIG_CMD_MMC
 #  define CONFIG_DOS_PARTITION
 # endif
 # ifdef CONFIG_MMC_SPI
 #  define CONFIG_CMD_MMC_SPI
 # endif
 # ifdef CONFIG_USB
 #  define CONFIG_CMD_EXT2
 #  define CONFIG_CMD_FAT
 #  define CONFIG_CMD_USB
 #  define CONFIG_CMD_USB_STORAGE
 #  define CONFIG_DOS_PARTITION
 # endif
 # if defined(CONFIG_NAND_PLAT) || defined(CONFIG_DRIVER_NAND_BFIN)
 #  define CONFIG_CMD_NAND
 #  define CONFIG_CMD_NAND_LOCK_UNLOCK
 # endif
 # ifdef CONFIG_POST
 #  define CONFIG_CMD_DIAG
 # endif
 # ifdef CONFIG_RTC_BFIN
 #  define CONFIG_CMD_DATE
 #  ifdef ADI_CMDS_NETWORK
 #   define CONFIG_CMD_SNTP
 #  endif
 # endif
 # ifdef CONFIG_SPI
 #  define CONFIG_CMD_EEPROM
 # endif
 # if defined(CONFIG_BFIN_SPI) || defined(CONFIG_SOFT_SPI)
 #  define CONFIG_CMD_SPI
 # endif
 # ifdef CONFIG_SPI_FLASH
 #  define CONFIG_CMD_SF
 # endif
 # if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
 #  define CONFIG_CMD_I2C
 #  define CONFIG_SOFT_I2C_READ_REPEATED_START
 # endif
 # ifdef CONFIG_SYS_NO_FLASH
 #  undef CONFIG_CMD_FLASH
 #  undef CONFIG_CMD_IMLS
 # else
 #  define CONFIG_CMD_JFFS2
 # endif
 # ifdef CONFIG_CMD_JFFS2
 #  define CONFIG_JFFS2_SUMMARY
 # endif
 # define CONFIG_CMD_BOOTLDR
 # define CONFIG_CMD_CACHE
 # define CONFIG_CMD_CPLBINFO
 # define CONFIG_CMD_ELF
 # define CONFIG_CMD_GPIO
 # define CONFIG_CMD_KGDB
 # define CONFIG_CMD_LDRINFO
 # define CONFIG_CMD_REGINFO
 # define CONFIG_CMD_STRINGS
 # if defined(__ADSPBF51x__) || defined(__ADSPBF52x__) || defined(__ADSPBF54x__)
 #  define CONFIG_CMD_OTP
 #  define CONFIG_CMD_SPIBOOTLDR
 # endif
 #endif

 /*
  * Console Settings
  */
 #define CONFIG_SYS_LONGHELP	1
 #define CONFIG_CMDLINE_EDITING	1
 #define CONFIG_AUTO_COMPLETE	1
 #define CONFIG_LOADS_ECHO	1
 #define CONFIG_JTAG_CONSOLE
 #define CONFIG_SILENT_CONSOLE
 #ifndef CONFIG_BAUDRATE
 # define CONFIG_BAUDRATE	57600
 #endif
 #ifdef CONFIG_UART_CONSOLE
 # define CONFIG_BFIN_SERIAL
 #endif

 /*
  * Debug Settings
  */
 #define CONFIG_ENV_OVERWRITE	1
 #define CONFIG_DEBUG_DUMP	1
 #define CONFIG_KALLSYMS		1
 #define CONFIG_PANIC_HANG	1

 /*
  * Env Settings
  */
 #ifndef CONFIG_BOOTDELAY
 # if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART)
 #  define CONFIG_BOOTDELAY	-1
 # else
 #  define CONFIG_BOOTDELAY	5
 # endif
 #endif
 #ifndef CONFIG_BOOTCOMMAND
 # define CONFIG_BOOTCOMMAND	"run ramboot"
 #endif
 #ifdef CONFIG_VIDEO
 # define CONFIG_BOOTARGS_VIDEO "console=tty0 "
 #else
 # define CONFIG_BOOTARGS_VIDEO ""
 #endif
 #ifndef CONFIG_BOOTARGS_ROOT
 # define CONFIG_BOOTARGS_ROOT "/dev/mtdblock0 rw"
 #endif
 #ifndef FLASHBOOT_ENV_SETTINGS
 # define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20100000\0"
 #endif
 #define CONFIG_BOOTARGS	\
 	"root=" CONFIG_BOOTARGS_ROOT " " \
 	"clkin_hz=" __stringify(CONFIG_CLKIN_HZ) " " \
 	"earlyprintk=" \
 		"serial," \
 		"uart" __stringify(CONFIG_UART_CONSOLE) "," \
 		__stringify(CONFIG_BAUDRATE) " " \
 	CONFIG_BOOTARGS_VIDEO \
 	"console=ttyBF" __stringify(CONFIG_UART_CONSOLE) "," \
 			__stringify(CONFIG_BAUDRATE)
 #if defined(CONFIG_CMD_NAND)
 # define NAND_ENV_SETTINGS \
 	"nandargs=set bootargs " CONFIG_BOOTARGS "\0" \
 	"nandboot=" \
 		"nand read $(loadaddr) 0x20000 0x100000;" \
 		"run nandargs;" \
 		"bootm" \
 		"\0"
 #else
 # define NAND_ENV_SETTINGS
 #endif
 #if defined(CONFIG_CMD_NET)
 # if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
 #  define UBOOT_ENV_FILE "u-boot.bin"
 # else
 #  define UBOOT_ENV_FILE "u-boot.ldr"
 # endif
 # if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
 #  ifdef CONFIG_SPI
 #   define UBOOT_ENV_UPDATE \
 		"eeprom write $(loadaddr) 0x0 $(filesize)"
 #  else
 #   ifndef CONFIG_BFIN_SPI_IMG_SIZE
 #    define CONFIG_BFIN_SPI_IMG_SIZE 0x40000
 #   endif
 #   define UBOOT_ENV_UPDATE \
 		"sf probe " __stringify(BFIN_BOOT_SPI_SSEL) ";" \
 		"sf erase 0 " __stringify(CONFIG_BFIN_SPI_IMG_SIZE) ";" \
 		"sf write $(loadaddr) 0 $(filesize)"
 #  endif
 # elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
 #  define UBOOT_ENV_UPDATE \
 		"nand unlock 0 0x40000;" \
 		"nand erase 0 0x40000;" \
 		"nand write $(loadaddr) 0 0x40000"
 # else
 #  ifndef UBOOT_ENV_UPDATE
 #   define UBOOT_ENV_UPDATE \
 		"protect off 0x20000000 +$(filesize);" \
 		"erase 0x20000000 +$(filesize);" \
 		"cp.b $(loadaddr) 0x20000000 $(filesize)"
 #  endif
 # endif
 # ifdef CONFIG_NETCONSOLE
 #  define NETCONSOLE_ENV \
 	"nc=" \
 		"set ncip ${serverip};" \
 		"set stdin nc;" \
 		"set stdout nc;" \
 		"set stderr nc" \
 		"\0"
 # else
 #  define NETCONSOLE_ENV
 # endif
 # define NETWORK_ENV_SETTINGS \
 	NETCONSOLE_ENV \
 	\
 	"ubootfile=" UBOOT_ENV_FILE "\0" \
 	"update=" \
 		"tftp $(loadaddr) $(ubootfile);" \
 		UBOOT_ENV_UPDATE \
 		"\0" \
 	"addip=set bootargs $(bootargs) " \
 		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):" \
 		   "$(hostname):eth0:off" \
 		"\0" \
 	\
 	"ramfile=uImage\0" \
 	"ramargs=set bootargs " CONFIG_BOOTARGS "\0" \
 	"ramboot=" \
 		"tftp $(loadaddr) $(ramfile);" \
 		"run ramargs;" \
 		"run addip;" \
 		"bootm" \
 		"\0" \
 	\
 	"nfsfile=vmImage\0" \
 	"nfsargs=set bootargs " \
 		"root=/dev/nfs rw " \
 		"nfsroot=$(serverip):$(rootpath),tcp,nfsvers=3" \
 		"\0" \
 	"nfsboot=" \
 		"tftp $(loadaddr) $(nfsfile);" \
 		"run nfsargs;" \
 		"run addip;" \
 		"bootm" \
 		"\0"
 #else
 # define NETWORK_ENV_SETTINGS
 #endif
 #ifndef BOARD_ENV_SETTINGS
 # define BOARD_ENV_SETTINGS
 #endif
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	NAND_ENV_SETTINGS \
 	NETWORK_ENV_SETTINGS \
 	FLASHBOOT_ENV_SETTINGS \
 	BOARD_ENV_SETTINGS

 /*
  * Network Settings
  */
 #ifdef CONFIG_CMD_NET
 # define CONFIG_NETMASK		255.255.255.0
 # ifndef CONFIG_IPADDR
 #  define CONFIG_IPADDR		192.168.0.15
 #  define CONFIG_GATEWAYIP	192.168.0.1
 #  define CONFIG_SERVERIP	192.168.0.2
 # endif
 # ifndef CONFIG_ROOTPATH
 #  define CONFIG_ROOTPATH	"/romfs"
 # endif
 # ifdef CONFIG_CMD_DHCP
 #  ifndef CONFIG_SYS_AUTOLOAD
 #   define CONFIG_SYS_AUTOLOAD "no"
 #  endif
 # endif
 # define CONFIG_IP_DEFRAG
 # define CONFIG_NET_RETRY_COUNT 20
 #endif

 /*
  * Flash Settings
  */
 #define CONFIG_FLASH_SHOW_PROGRESS 45

 /*
  * SPI Settings
  */
 #ifdef CONFIG_SPI_FLASH_ALL
 # define CONFIG_SPI_FLASH_ATMEL
 # define CONFIG_SPI_FLASH_EON
 # define CONFIG_SPI_FLASH_MACRONIX
 # define CONFIG_SPI_FLASH_SPANSION
 # define CONFIG_SPI_FLASH_SST
 # define CONFIG_SPI_FLASH_STMICRO
 # define CONFIG_SPI_FLASH_WINBOND
 #endif

 /*
  * I2C Settings
  */
 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
 # ifndef CONFIG_SYS_I2C_SPEED
 #  define CONFIG_SYS_I2C_SPEED 50000
 # endif
 # ifndef CONFIG_SYS_I2C_SLAVE
 #  define CONFIG_SYS_I2C_SLAVE 0
 # endif
 #endif

 /*
  * Misc Settings
  */
 #ifndef CONFIG_BOARD_SIZE_LIMIT
 # define CONFIG_BOARD_SIZE_LIMIT $$(( 256 * 1024 ))
 #endif
 #define CONFIG_BFIN_SPI_GPIO_CS /* Only matters if BFIN_SPI is enabled */
 #define CONFIG_LZMA
 #define CONFIG_MONITOR_IS_IN_RAM
 #ifdef CONFIG_HW_WATCHDOG
 # define CONFIG_BFIN_WATCHDOG
 # ifndef CONFIG_WATCHDOG_TIMEOUT_MSECS
 #  define CONFIG_WATCHDOG_TIMEOUT_MSECS 5000
 # endif
 #endif

 #endif
	/*
	* U-Boot - Common settings for Analog Devices boards
	*/

	#ifndef __CONFIG_BFIN_ADI_COMMON_H__
	#define __CONFIG_BFIN_ADI_COMMON_H__

	/*
	* Command Settings
	*/
	#ifndef _CONFIG_CMD_DEFAULT_H
	# include <config_cmd_default.h>
	# ifdef ADI_CMDS_NETWORK
	# define CONFIG_CMD_DHCP
	# define CONFIG_BOOTP_SUBNETMASK
	# define CONFIG_BOOTP_GATEWAY
	# define CONFIG_BOOTP_DNS
	# define CONFIG_BOOTP_NTPSERVER
	# define CONFIG_BOOTP_RANDOM_DELAY
	# define CONFIG_KEEP_SERVERADDR
	# define CONFIG_CMD_DNS
	# define CONFIG_CMD_PING
	# ifdef CONFIG_BFIN_MAC
	# define CONFIG_CMD_MII
	# endif
	# else
	# undef CONFIG_CMD_BOOTD
	# undef CONFIG_CMD_NET
	# undef CONFIG_CMD_NFS
	# endif
	# ifdef CONFIG_LIBATA
	# define CONFIG_CMD_FAT
	# define CONFIG_CMD_SATA
	# define CONFIG_DOS_PARTITION
	# endif
	# ifdef CONFIG_MMC
	# define CONFIG_CMD_EXT2
	# define CONFIG_CMD_FAT
	# define CONFIG_CMD_MMC
	# define CONFIG_DOS_PARTITION
	# endif
	# ifdef CONFIG_MMC_SPI
	# define CONFIG_CMD_MMC_SPI
	# endif
	# ifdef CONFIG_USB
	# define CONFIG_CMD_EXT2
	# define CONFIG_CMD_FAT
	# define CONFIG_CMD_USB
	# define CONFIG_CMD_USB_STORAGE
	# define CONFIG_DOS_PARTITION
	# endif
	# if defined(CONFIG_NAND_PLAT) \|\| defined(CONFIG_DRIVER_NAND_BFIN)
	# define CONFIG_CMD_NAND
	# define CONFIG_CMD_NAND_LOCK_UNLOCK
	# endif
	# ifdef CONFIG_POST
	# define CONFIG_CMD_DIAG
	# endif
	# ifdef CONFIG_RTC_BFIN
	# define CONFIG_CMD_DATE
	# ifdef ADI_CMDS_NETWORK
	# define CONFIG_CMD_SNTP
	# endif
	# endif
	# ifdef CONFIG_SPI
	# define CONFIG_CMD_EEPROM
	# endif
	# if defined(CONFIG_BFIN_SPI) \|\| defined(CONFIG_SOFT_SPI)
	# define CONFIG_CMD_SPI
	# endif
	# ifdef CONFIG_SPI_FLASH
	# define CONFIG_CMD_SF
	# endif
	# if defined(CONFIG_HARD_I2C) \|\| defined(CONFIG_SOFT_I2C)
	# define CONFIG_CMD_I2C
	# define CONFIG_SOFT_I2C_READ_REPEATED_START
	# endif
	# ifdef CONFIG_SYS_NO_FLASH
	# undef CONFIG_CMD_FLASH
	# undef CONFIG_CMD_IMLS
	# else
	# define CONFIG_CMD_JFFS2
	# endif
	# ifdef CONFIG_CMD_JFFS2
	# define CONFIG_JFFS2_SUMMARY
	# endif
	# define CONFIG_CMD_BOOTLDR
	# define CONFIG_CMD_CACHE
	# define CONFIG_CMD_CPLBINFO
	# define CONFIG_CMD_ELF
	# define CONFIG_CMD_GPIO
	# define CONFIG_CMD_KGDB
	# define CONFIG_CMD_LDRINFO
	# define CONFIG_CMD_REGINFO
	# define CONFIG_CMD_STRINGS
	# if defined(__ADSPBF51x__) \|\| defined(__ADSPBF52x__) \|\| defined(__ADSPBF54x__)
	# define CONFIG_CMD_OTP
	# define CONFIG_CMD_SPIBOOTLDR
	# endif
	#endif

	/*
	* Console Settings
	*/
	#define CONFIG_SYS_LONGHELP 1
	#define CONFIG_CMDLINE_EDITING 1
	#define CONFIG_AUTO_COMPLETE 1
	#define CONFIG_LOADS_ECHO 1
	#define CONFIG_JTAG_CONSOLE
	#define CONFIG_SILENT_CONSOLE
	#ifndef CONFIG_BAUDRATE
	# define CONFIG_BAUDRATE 57600
	#endif
	#ifdef CONFIG_UART_CONSOLE
	# define CONFIG_BFIN_SERIAL
	#endif

	/*
	* Debug Settings
	*/
	#define CONFIG_ENV_OVERWRITE 1
	#define CONFIG_DEBUG_DUMP 1
	#define CONFIG_KALLSYMS 1
	#define CONFIG_PANIC_HANG 1

	/*
	* Env Settings
	*/
	#ifndef CONFIG_BOOTDELAY
	# if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART)
	# define CONFIG_BOOTDELAY -1
	# else
	# define CONFIG_BOOTDELAY 5
	# endif
	#endif
	#ifndef CONFIG_BOOTCOMMAND
	# define CONFIG_BOOTCOMMAND "run ramboot"
	#endif
	#ifdef CONFIG_VIDEO
	# define CONFIG_BOOTARGS_VIDEO "console=tty0 "
	#else
	# define CONFIG_BOOTARGS_VIDEO ""
	#endif
	#ifndef CONFIG_BOOTARGS_ROOT
	# define CONFIG_BOOTARGS_ROOT "/dev/mtdblock0 rw"
	#endif
	#ifndef FLASHBOOT_ENV_SETTINGS
	# define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20100000\0"
	#endif
	#define CONFIG_BOOTARGS \
	"root=" CONFIG_BOOTARGS_ROOT " " \
	"clkin_hz=" __stringify(CONFIG_CLKIN_HZ) " " \
	"earlyprintk=" \
	"serial," \
	"uart" __stringify(CONFIG_UART_CONSOLE) "," \
	__stringify(CONFIG_BAUDRATE) " " \
	CONFIG_BOOTARGS_VIDEO \
	"console=ttyBF" __stringify(CONFIG_UART_CONSOLE) "," \
	__stringify(CONFIG_BAUDRATE)
	#if defined(CONFIG_CMD_NAND)
	# define NAND_ENV_SETTINGS \
	"nandargs=set bootargs " CONFIG_BOOTARGS "\0" \
	"nandboot=" \
	"nand read $(loadaddr) 0x20000 0x100000;" \
	"run nandargs;" \
	"bootm" \
	"\0"
	#else
	# define NAND_ENV_SETTINGS
	#endif
	#if defined(CONFIG_CMD_NET)
	# if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
	# define UBOOT_ENV_FILE "u-boot.bin"
	# else
	# define UBOOT_ENV_FILE "u-boot.ldr"
	# endif
	# if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
	# ifdef CONFIG_SPI
	# define UBOOT_ENV_UPDATE \
	"eeprom write $(loadaddr) 0x0 $(filesize)"
	# else
	# ifndef CONFIG_BFIN_SPI_IMG_SIZE
	# define CONFIG_BFIN_SPI_IMG_SIZE 0x40000
	# endif
	# define UBOOT_ENV_UPDATE \
	"sf probe " __stringify(BFIN_BOOT_SPI_SSEL) ";" \
	"sf erase 0 " __stringify(CONFIG_BFIN_SPI_IMG_SIZE) ";" \
	"sf write $(loadaddr) 0 $(filesize)"
	# endif
	# elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
	# define UBOOT_ENV_UPDATE \
	"nand unlock 0 0x40000;" \
	"nand erase 0 0x40000;" \
	"nand write $(loadaddr) 0 0x40000"
	# else
	# ifndef UBOOT_ENV_UPDATE
	# define UBOOT_ENV_UPDATE \
	"protect off 0x20000000 +$(filesize);" \
	"erase 0x20000000 +$(filesize);" \
	"cp.b $(loadaddr) 0x20000000 $(filesize)"
	# endif
	# endif
	# ifdef CONFIG_NETCONSOLE
	# define NETCONSOLE_ENV \
	"nc=" \
	"set ncip ${serverip};" \
	"set stdin nc;" \
	"set stdout nc;" \
	"set stderr nc" \
	"\0"
	# else
	# define NETCONSOLE_ENV
	# endif
	# define NETWORK_ENV_SETTINGS \
	NETCONSOLE_ENV \
	\
	"ubootfile=" UBOOT_ENV_FILE "\0" \
	"update=" \
	"tftp $(loadaddr) $(ubootfile);" \
	UBOOT_ENV_UPDATE \
	"\0" \
	"addip=set bootargs $(bootargs) " \
	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):" \
	"$(hostname):eth0:off" \
	"\0" \
	\
	"ramfile=uImage\0" \
	"ramargs=set bootargs " CONFIG_BOOTARGS "\0" \
	"ramboot=" \
	"tftp $(loadaddr) $(ramfile);" \
	"run ramargs;" \
	"run addip;" \
	"bootm" \
	"\0" \
	\
	"nfsfile=vmImage\0" \
	"nfsargs=set bootargs " \
	"root=/dev/nfs rw " \
	"nfsroot=$(serverip):$(rootpath),tcp,nfsvers=3" \
	"\0" \
	"nfsboot=" \
	"tftp $(loadaddr) $(nfsfile);" \
	"run nfsargs;" \
	"run addip;" \
	"bootm" \
	"\0"
	#else
	# define NETWORK_ENV_SETTINGS
	#endif
	#ifndef BOARD_ENV_SETTINGS
	# define BOARD_ENV_SETTINGS
	#endif
	#define CONFIG_EXTRA_ENV_SETTINGS \
	NAND_ENV_SETTINGS \
	NETWORK_ENV_SETTINGS \
	FLASHBOOT_ENV_SETTINGS \
	BOARD_ENV_SETTINGS

	/*
	* Network Settings
	*/
	#ifdef CONFIG_CMD_NET
	# define CONFIG_NETMASK 255.255.255.0
	# ifndef CONFIG_IPADDR
	# define CONFIG_IPADDR 192.168.0.15
	# define CONFIG_GATEWAYIP 192.168.0.1
	# define CONFIG_SERVERIP 192.168.0.2
	# endif
	# ifndef CONFIG_ROOTPATH
	# define CONFIG_ROOTPATH "/romfs"
	# endif
	# ifdef CONFIG_CMD_DHCP
	# ifndef CONFIG_SYS_AUTOLOAD
	# define CONFIG_SYS_AUTOLOAD "no"
	# endif
	# endif
	# define CONFIG_IP_DEFRAG
	# define CONFIG_NET_RETRY_COUNT 20
	#endif

	/*
	* Flash Settings
	*/
	#define CONFIG_FLASH_SHOW_PROGRESS 45

	/*
	* SPI Settings
	*/
	#ifdef CONFIG_SPI_FLASH_ALL
	# define CONFIG_SPI_FLASH_ATMEL
	# define CONFIG_SPI_FLASH_EON
	# define CONFIG_SPI_FLASH_MACRONIX
	# define CONFIG_SPI_FLASH_SPANSION
	# define CONFIG_SPI_FLASH_SST
	# define CONFIG_SPI_FLASH_STMICRO
	# define CONFIG_SPI_FLASH_WINBOND
	#endif

	/*
	* I2C Settings
	*/
	#if defined(CONFIG_HARD_I2C) \|\| defined(CONFIG_SOFT_I2C)
	# ifndef CONFIG_SYS_I2C_SPEED
	# define CONFIG_SYS_I2C_SPEED 50000
	# endif
	# ifndef CONFIG_SYS_I2C_SLAVE
	# define CONFIG_SYS_I2C_SLAVE 0
	# endif
	#endif

	/*
	* Misc Settings
	*/
	#ifndef CONFIG_BOARD_SIZE_LIMIT
	# define CONFIG_BOARD_SIZE_LIMIT $$(( 256 * 1024 ))
	#endif
	#define CONFIG_BFIN_SPI_GPIO_CS /* Only matters if BFIN_SPI is enabled */
	#define CONFIG_LZMA
	#define CONFIG_MONITOR_IS_IN_RAM
	#ifdef CONFIG_HW_WATCHDOG
	# define CONFIG_BFIN_WATCHDOG
	# ifndef CONFIG_WATCHDOG_TIMEOUT_MSECS
	# define CONFIG_WATCHDOG_TIMEOUT_MSECS 5000
	# endif
	#endif

	#endif