| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2018 Samsung Electronics |
| * Jaehoon Chung <jh80.chung@samsung.com> |
| */ |
| |
| #include <common.h> |
| #include <fdtdec.h> |
| #include <errno.h> |
| #include <dm.h> |
| #include <i2c.h> |
| #include <linux/delay.h> |
| #include <power/pmic.h> |
| #include <power/regulator.h> |
| #include <power/s2mps11.h> |
| |
| #define MODE(_id, _val, _name) { \ |
| .id = _id, \ |
| .register_value = _val, \ |
| .name = _name, \ |
| } |
| |
| /* BUCK : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 */ |
| static struct dm_regulator_mode s2mps11_buck_modes[] = { |
| MODE(OP_OFF, S2MPS11_BUCK_MODE_OFF, "OFF"), |
| MODE(OP_STANDBY, S2MPS11_BUCK_MODE_STANDBY, "ON/OFF"), |
| MODE(OP_ON, S2MPS11_BUCK_MODE_STANDBY, "ON"), |
| }; |
| |
| static struct dm_regulator_mode s2mps11_ldo_modes[] = { |
| MODE(OP_OFF, S2MPS11_LDO_MODE_OFF, "OFF"), |
| MODE(OP_STANDBY, S2MPS11_LDO_MODE_STANDBY, "ON/OFF"), |
| MODE(OP_STANDBY_LPM, S2MPS11_LDO_MODE_STANDBY_LPM, "ON/LPM"), |
| MODE(OP_ON, S2MPS11_LDO_MODE_ON, "ON"), |
| }; |
| |
| static const char s2mps11_buck_ctrl[] = { |
| 0xff, 0x25, 0x27, 0x29, 0x2b, 0x2d, 0x33, 0x35, 0x37, 0x39, 0x3b |
| }; |
| |
| static const char s2mps11_buck_out[] = { |
| 0xff, 0x26, 0x28, 0x2a, 0x2c, 0x2f, 0x34, 0x36, 0x38, 0x3a, 0x3c |
| }; |
| |
| static int s2mps11_buck_hex2volt(int buck, int hex) |
| { |
| unsigned int uV = 0; |
| |
| if (hex < 0) |
| goto bad; |
| |
| switch (buck) { |
| case 7: |
| case 8: |
| case 10: |
| if (hex > S2MPS11_BUCK7_8_10_VOLT_MAX_HEX) |
| goto bad; |
| |
| uV = hex * S2MPS11_BUCK_HSTEP + S2MPS11_BUCK_UV_HMIN; |
| break; |
| case 9: |
| if (hex > S2MPS11_BUCK9_VOLT_MAX_HEX) |
| goto bad; |
| uV = hex * S2MPS11_BUCK9_STEP * 2 + S2MPS11_BUCK9_UV_MIN; |
| break; |
| default: |
| if (buck == 5 && hex > S2MPS11_BUCK5_VOLT_MAX_HEX) |
| goto bad; |
| else if (buck != 5 && hex > S2MPS11_BUCK_VOLT_MAX_HEX) |
| goto bad; |
| |
| uV = hex * S2MPS11_BUCK_LSTEP + S2MPS11_BUCK_UV_MIN; |
| break; |
| } |
| |
| return uV; |
| bad: |
| pr_err("Value: %#x is wrong for BUCK%d", hex, buck); |
| return -EINVAL; |
| } |
| |
| static int s2mps11_buck_volt2hex(int buck, int uV) |
| { |
| int hex; |
| |
| switch (buck) { |
| case 7: |
| case 8: |
| case 10: |
| hex = (uV - S2MPS11_BUCK_UV_HMIN) / S2MPS11_BUCK_HSTEP; |
| if (hex > S2MPS11_BUCK7_8_10_VOLT_MAX_HEX) |
| goto bad; |
| |
| break; |
| case 9: |
| hex = (uV - S2MPS11_BUCK9_UV_MIN) / S2MPS11_BUCK9_STEP; |
| if (hex > S2MPS11_BUCK9_VOLT_MAX_HEX) |
| goto bad; |
| break; |
| default: |
| hex = (uV - S2MPS11_BUCK_UV_MIN) / S2MPS11_BUCK_LSTEP; |
| if (buck == 5 && hex > S2MPS11_BUCK5_VOLT_MAX_HEX) |
| goto bad; |
| else if (buck != 5 && hex > S2MPS11_BUCK_VOLT_MAX_HEX) |
| goto bad; |
| break; |
| }; |
| |
| if (hex >= 0) |
| return hex; |
| |
| bad: |
| pr_err("Value: %d uV is wrong for BUCK%d", uV, buck); |
| return -EINVAL; |
| } |
| |
| static int s2mps11_buck_val(struct udevice *dev, int op, int *uV) |
| { |
| int hex, buck, ret; |
| u32 mask, addr; |
| u8 val; |
| |
| buck = dev->driver_data; |
| if (buck < 1 || buck > S2MPS11_BUCK_NUM) { |
| pr_err("Wrong buck number: %d\n", buck); |
| return -EINVAL; |
| } |
| |
| if (op == PMIC_OP_GET) |
| *uV = 0; |
| |
| addr = s2mps11_buck_out[buck]; |
| |
| switch (buck) { |
| case 9: |
| mask = S2MPS11_BUCK9_VOLT_MASK; |
| break; |
| default: |
| mask = S2MPS11_BUCK_VOLT_MASK; |
| break; |
| } |
| |
| ret = pmic_read(dev->parent, addr, &val, 1); |
| if (ret) |
| return ret; |
| |
| if (op == PMIC_OP_GET) { |
| val &= mask; |
| ret = s2mps11_buck_hex2volt(buck, val); |
| if (ret < 0) |
| return ret; |
| *uV = ret; |
| return 0; |
| } |
| |
| hex = s2mps11_buck_volt2hex(buck, *uV); |
| if (hex < 0) |
| return hex; |
| |
| val &= ~mask; |
| val |= hex; |
| ret = pmic_write(dev->parent, addr, &val, 1); |
| |
| return ret; |
| } |
| |
| static int s2mps11_buck_mode(struct udevice *dev, int op, int *opmode) |
| { |
| unsigned int addr, mode; |
| unsigned char val; |
| int buck, ret; |
| |
| buck = dev->driver_data; |
| if (buck < 1 || buck > S2MPS11_BUCK_NUM) { |
| pr_err("Wrong buck number: %d\n", buck); |
| return -EINVAL; |
| } |
| |
| addr = s2mps11_buck_ctrl[buck]; |
| |
| ret = pmic_read(dev->parent, addr, &val, 1); |
| if (ret) |
| return ret; |
| |
| if (op == PMIC_OP_GET) { |
| val &= (S2MPS11_BUCK_MODE_MASK << S2MPS11_BUCK_MODE_SHIFT); |
| switch (val) { |
| case S2MPS11_BUCK_MODE_OFF: |
| *opmode = OP_OFF; |
| break; |
| case S2MPS11_BUCK_MODE_STANDBY: |
| *opmode = OP_STANDBY; |
| break; |
| case S2MPS11_BUCK_MODE_ON: |
| *opmode = OP_ON; |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| switch (*opmode) { |
| case OP_OFF: |
| mode = S2MPS11_BUCK_MODE_OFF; |
| break; |
| case OP_STANDBY: |
| mode = S2MPS11_BUCK_MODE_STANDBY; |
| break; |
| case OP_ON: |
| mode = S2MPS11_BUCK_MODE_ON; |
| break; |
| default: |
| pr_err("Wrong mode: %d for buck: %d\n", *opmode, buck); |
| return -EINVAL; |
| } |
| |
| val &= ~(S2MPS11_BUCK_MODE_MASK << S2MPS11_BUCK_MODE_SHIFT); |
| val |= mode; |
| ret = pmic_write(dev->parent, addr, &val, 1); |
| |
| return ret; |
| } |
| |
| static int s2mps11_buck_enable(struct udevice *dev, int op, bool *enable) |
| { |
| int ret, on_off; |
| |
| if (op == PMIC_OP_GET) { |
| ret = s2mps11_buck_mode(dev, op, &on_off); |
| if (ret) |
| return ret; |
| switch (on_off) { |
| case OP_OFF: |
| *enable = false; |
| break; |
| case OP_ON: |
| *enable = true; |
| break; |
| default: |
| return -EINVAL; |
| } |
| } else if (op == PMIC_OP_SET) { |
| if (*enable) |
| on_off = OP_ON; |
| else |
| on_off = OP_OFF; |
| |
| ret = s2mps11_buck_mode(dev, op, &on_off); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int buck_get_value(struct udevice *dev) |
| { |
| int uV; |
| int ret; |
| |
| ret = s2mps11_buck_val(dev, PMIC_OP_GET, &uV); |
| if (ret) |
| return ret; |
| return uV; |
| } |
| |
| static int buck_set_value(struct udevice *dev, int uV) |
| { |
| return s2mps11_buck_val(dev, PMIC_OP_SET, &uV); |
| } |
| |
| static int buck_get_enable(struct udevice *dev) |
| { |
| bool enable = false; |
| int ret; |
| |
| ret = s2mps11_buck_enable(dev, PMIC_OP_GET, &enable); |
| if (ret) |
| return ret; |
| return enable; |
| } |
| |
| static int buck_set_enable(struct udevice *dev, bool enable) |
| { |
| return s2mps11_buck_enable(dev, PMIC_OP_SET, &enable); |
| } |
| |
| static int buck_get_mode(struct udevice *dev) |
| { |
| int mode; |
| int ret; |
| |
| ret = s2mps11_buck_mode(dev, PMIC_OP_GET, &mode); |
| if (ret) |
| return ret; |
| |
| return mode; |
| } |
| |
| static int buck_set_mode(struct udevice *dev, int mode) |
| { |
| return s2mps11_buck_mode(dev, PMIC_OP_SET, &mode); |
| } |
| |
| static int s2mps11_buck_probe(struct udevice *dev) |
| { |
| struct dm_regulator_uclass_plat *uc_pdata; |
| |
| uc_pdata = dev_get_uclass_plat(dev); |
| |
| uc_pdata->type = REGULATOR_TYPE_BUCK; |
| uc_pdata->mode = s2mps11_buck_modes; |
| uc_pdata->mode_count = ARRAY_SIZE(s2mps11_buck_modes); |
| |
| return 0; |
| } |
| |
| static const struct dm_regulator_ops s2mps11_buck_ops = { |
| .get_value = buck_get_value, |
| .set_value = buck_set_value, |
| .get_enable = buck_get_enable, |
| .set_enable = buck_set_enable, |
| .get_mode = buck_get_mode, |
| .set_mode = buck_set_mode, |
| }; |
| |
| U_BOOT_DRIVER(s2mps11_buck) = { |
| .name = S2MPS11_BUCK_DRIVER, |
| .id = UCLASS_REGULATOR, |
| .ops = &s2mps11_buck_ops, |
| .probe = s2mps11_buck_probe, |
| }; |
| |
| static int s2mps11_ldo_hex2volt(int ldo, int hex) |
| { |
| unsigned int uV = 0; |
| |
| if (hex > S2MPS11_LDO_VOLT_MAX_HEX) { |
| pr_err("Value: %#x is wrong for LDO%d", hex, ldo); |
| return -EINVAL; |
| } |
| |
| switch (ldo) { |
| case 1: |
| case 6: |
| case 11: |
| case 22: |
| case 23: |
| case 27: |
| case 35: |
| uV = hex * S2MPS11_LDO_STEP + S2MPS11_LDO_UV_MIN; |
| break; |
| default: |
| uV = hex * S2MPS11_LDO_STEP * 2 + S2MPS11_LDO_UV_MIN; |
| break; |
| } |
| |
| return uV; |
| } |
| |
| static int s2mps11_ldo_volt2hex(int ldo, int uV) |
| { |
| int hex = 0; |
| |
| switch (ldo) { |
| case 1: |
| case 6: |
| case 11: |
| case 22: |
| case 23: |
| case 27: |
| case 35: |
| hex = (uV - S2MPS11_LDO_UV_MIN) / S2MPS11_LDO_STEP; |
| break; |
| default: |
| hex = (uV - S2MPS11_LDO_UV_MIN) / (S2MPS11_LDO_STEP * 2); |
| break; |
| } |
| |
| if (hex >= 0 && hex <= S2MPS11_LDO_VOLT_MAX_HEX) |
| return hex; |
| |
| pr_err("Value: %d uV is wrong for LDO%d", uV, ldo); |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int s2mps11_ldo_val(struct udevice *dev, int op, int *uV) |
| { |
| unsigned int addr; |
| unsigned char val; |
| int hex, ldo, ret; |
| |
| ldo = dev->driver_data; |
| if (ldo < 1 || ldo > S2MPS11_LDO_NUM) { |
| pr_err("Wrong ldo number: %d\n", ldo); |
| return -EINVAL; |
| } |
| |
| addr = S2MPS11_REG_L1CTRL + ldo - 1; |
| |
| ret = pmic_read(dev->parent, addr, &val, 1); |
| if (ret) |
| return ret; |
| |
| if (op == PMIC_OP_GET) { |
| *uV = 0; |
| val &= S2MPS11_LDO_VOLT_MASK; |
| ret = s2mps11_ldo_hex2volt(ldo, val); |
| if (ret < 0) |
| return ret; |
| |
| *uV = ret; |
| return 0; |
| } |
| |
| hex = s2mps11_ldo_volt2hex(ldo, *uV); |
| if (hex < 0) |
| return hex; |
| |
| val &= ~S2MPS11_LDO_VOLT_MASK; |
| val |= hex; |
| ret = pmic_write(dev->parent, addr, &val, 1); |
| |
| return ret; |
| } |
| |
| static int s2mps11_ldo_mode(struct udevice *dev, int op, int *opmode) |
| { |
| unsigned int addr, mode; |
| unsigned char val; |
| int ldo, ret; |
| |
| ldo = dev->driver_data; |
| if (ldo < 1 || ldo > S2MPS11_LDO_NUM) { |
| pr_err("Wrong ldo number: %d\n", ldo); |
| return -EINVAL; |
| } |
| addr = S2MPS11_REG_L1CTRL + ldo - 1; |
| |
| ret = pmic_read(dev->parent, addr, &val, 1); |
| if (ret) |
| return ret; |
| |
| if (op == PMIC_OP_GET) { |
| val &= (S2MPS11_LDO_MODE_MASK << S2MPS11_LDO_MODE_SHIFT); |
| switch (val) { |
| case S2MPS11_LDO_MODE_OFF: |
| *opmode = OP_OFF; |
| break; |
| case S2MPS11_LDO_MODE_STANDBY: |
| *opmode = OP_STANDBY; |
| break; |
| case S2MPS11_LDO_MODE_STANDBY_LPM: |
| *opmode = OP_STANDBY_LPM; |
| break; |
| case S2MPS11_LDO_MODE_ON: |
| *opmode = OP_ON; |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| switch (*opmode) { |
| case OP_OFF: |
| mode = S2MPS11_LDO_MODE_OFF; |
| break; |
| case OP_STANDBY: |
| mode = S2MPS11_LDO_MODE_STANDBY; |
| break; |
| case OP_STANDBY_LPM: |
| mode = S2MPS11_LDO_MODE_STANDBY_LPM; |
| break; |
| case OP_ON: |
| mode = S2MPS11_LDO_MODE_ON; |
| break; |
| default: |
| pr_err("Wrong mode: %d for ldo: %d\n", *opmode, ldo); |
| return -EINVAL; |
| } |
| |
| val &= ~(S2MPS11_LDO_MODE_MASK << S2MPS11_LDO_MODE_SHIFT); |
| val |= mode; |
| ret = pmic_write(dev->parent, addr, &val, 1); |
| |
| return ret; |
| } |
| |
| static int s2mps11_ldo_enable(struct udevice *dev, int op, bool *enable) |
| { |
| int ret, on_off; |
| |
| if (op == PMIC_OP_GET) { |
| ret = s2mps11_ldo_mode(dev, op, &on_off); |
| if (ret) |
| return ret; |
| switch (on_off) { |
| case OP_OFF: |
| *enable = false; |
| break; |
| case OP_ON: |
| *enable = true; |
| break; |
| default: |
| return -EINVAL; |
| } |
| } else if (op == PMIC_OP_SET) { |
| if (*enable) |
| on_off = OP_ON; |
| else |
| on_off = OP_OFF; |
| |
| ret = s2mps11_ldo_mode(dev, op, &on_off); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int ldo_get_value(struct udevice *dev) |
| { |
| int uV; |
| int ret; |
| |
| ret = s2mps11_ldo_val(dev, PMIC_OP_GET, &uV); |
| if (ret) |
| return ret; |
| |
| return uV; |
| } |
| |
| static int ldo_set_value(struct udevice *dev, int uV) |
| { |
| return s2mps11_ldo_val(dev, PMIC_OP_SET, &uV); |
| } |
| |
| static int ldo_get_enable(struct udevice *dev) |
| { |
| bool enable = false; |
| int ret; |
| |
| ret = s2mps11_ldo_enable(dev, PMIC_OP_GET, &enable); |
| if (ret) |
| return ret; |
| return enable; |
| } |
| |
| static int ldo_set_enable(struct udevice *dev, bool enable) |
| { |
| int ret; |
| |
| ret = s2mps11_ldo_enable(dev, PMIC_OP_SET, &enable); |
| if (ret) |
| return ret; |
| |
| /* Wait the "enable delay" for voltage to start to rise */ |
| udelay(15); |
| |
| return 0; |
| } |
| |
| static int ldo_get_mode(struct udevice *dev) |
| { |
| int mode, ret; |
| |
| ret = s2mps11_ldo_mode(dev, PMIC_OP_GET, &mode); |
| if (ret) |
| return ret; |
| return mode; |
| } |
| |
| static int ldo_set_mode(struct udevice *dev, int mode) |
| { |
| return s2mps11_ldo_mode(dev, PMIC_OP_SET, &mode); |
| } |
| |
| static int s2mps11_ldo_probe(struct udevice *dev) |
| { |
| struct dm_regulator_uclass_plat *uc_pdata; |
| |
| uc_pdata = dev_get_uclass_plat(dev); |
| uc_pdata->type = REGULATOR_TYPE_LDO; |
| uc_pdata->mode = s2mps11_ldo_modes; |
| uc_pdata->mode_count = ARRAY_SIZE(s2mps11_ldo_modes); |
| |
| return 0; |
| } |
| |
| static const struct dm_regulator_ops s2mps11_ldo_ops = { |
| .get_value = ldo_get_value, |
| .set_value = ldo_set_value, |
| .get_enable = ldo_get_enable, |
| .set_enable = ldo_set_enable, |
| .get_mode = ldo_get_mode, |
| .set_mode = ldo_set_mode, |
| }; |
| |
| U_BOOT_DRIVER(s2mps11_ldo) = { |
| .name = S2MPS11_LDO_DRIVER, |
| .id = UCLASS_REGULATOR, |
| .ops = &s2mps11_ldo_ops, |
| .probe = s2mps11_ldo_probe, |
| }; |