arch/powerpc/cpu/mpc8260/pci.c - filogic/uboot - Gitiles

 /*
  * (C) Copyright 2003
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * Copyright (c) 2005 MontaVista Software, Inc.
  * Vitaly Bordug <vbordug@ru.mvista.com>
  * Added support for PCI bridge on MPC8272ADS
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #include <common.h>

 #ifdef CONFIG_PCI

 #include <pci.h>
 #include <mpc8260.h>
 #include <asm/m8260_pci.h>
 #include <asm/io.h>
 #ifdef CONFIG_OF_LIBFDT
 #include <libfdt.h>
 #include <fdt_support.h>
 #endif

 #if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272 || defined CONFIG_PM826
 DECLARE_GLOBAL_DATA_PTR;
 #endif

 /*
  *   Local->PCI map (from CPU)				   controlled by
  *   MPC826x master window
  *
  *   0x80000000 - 0xBFFFFFFF	CPU2PCI space		   PCIBR0
  *   0xF4000000 - 0xF7FFFFFF	CPU2PCI space		   PCIBR1
  *
  *   0x80000000 - 0x9FFFFFFF	0x80000000 - 0x9FFFFFFF	  (Outbound ATU #1)
  *				PCI Mem with prefetch
  *
  *   0xA0000000 - 0xBFFFFFFF	0xA0000000 - 0xBFFFFFFF	  (Outbound ATU #2)
  *				PCI Mem w/o  prefetch
  *
  *   0xF4000000 - 0xF7FFFFFF	0x00000000 - 0x03FFFFFF	  (Outbound ATU #3)
  *				32-bit PCI IO
  *
  *   PCI->Local map (from PCI)
  *   MPC826x slave window				   controlled by
  *
  *   0x00000000 - 0x1FFFFFFF	0x00000000 - 0x1FFFFFFF	  (Inbound ATU #1)
  *				MPC826x local memory
  */

 /*
  * Slave window that allows PCI masters to access MPC826x local memory.
  * This window is set up using the first set of Inbound ATU registers
  */

 #ifndef CONFIG_SYS_PCI_SLV_MEM_LOCAL
 #define PCI_SLV_MEM_LOCAL CONFIG_SYS_SDRAM_BASE	/* Local base */
 #else
 #define PCI_SLV_MEM_LOCAL CONFIG_SYS_PCI_SLV_MEM_LOCAL
 #endif

 #ifndef CONFIG_SYS_PCI_SLV_MEM_BUS
 #define PCI_SLV_MEM_BUS 0x00000000	/* PCI base */
 #else
 #define PCI_SLV_MEM_BUS CONFIG_SYS_PCI_SLV_MEM_BUS
 #endif

 #ifndef CONFIG_SYS_PICMR0_MASK_ATTRIB
 #define PICMR0_MASK_ATTRIB	(PICMR_MASK_512MB | PICMR_ENABLE | \
 				 PICMR_PREFETCH_EN)
 #else
 #define PICMR0_MASK_ATTRIB CONFIG_SYS_PICMR0_MASK_ATTRIB
 #endif

 /*
  * These are the windows that allow the CPU to access PCI address space.
  * All three PCI master windows, which allow the CPU to access PCI
  * prefetch, non prefetch, and IO space (see below), must all fit within
  * these windows.
  */

 /* PCIBR0 */
 #ifndef CONFIG_SYS_PCI_MSTR0_LOCAL
 #define PCI_MSTR0_LOCAL		0x80000000	/* Local base */
 #else
 #define PCI_MSTR0_LOCAL CONFIG_SYS_PCI_MSTR0_LOCAL
 #endif

 #ifndef CONFIG_SYS_PCIMSK0_MASK
 #define PCIMSK0_MASK		PCIMSK_1GB	/* Size of window */
 #else
 #define PCIMSK0_MASK	CONFIG_SYS_PCIMSK0_MASK
 #endif

 /* PCIBR1 */
 #ifndef CONFIG_SYS_PCI_MSTR1_LOCAL
 #define PCI_MSTR1_LOCAL		0xF4000000	/* Local base */
 #else
 #define PCI_MSTR1_LOCAL		CONFIG_SYS_PCI_MSTR1_LOCAL
 #endif

 #ifndef CONFIG_SYS_PCIMSK1_MASK
 #define	 PCIMSK1_MASK		PCIMSK_64MB	/* Size of window */
 #else
 #define	 PCIMSK1_MASK		CONFIG_SYS_PCIMSK1_MASK
 #endif

 /*
  * Master window that allows the CPU to access PCI Memory (prefetch).
  * This window will be setup with the first set of Outbound ATU registers
  * in the bridge.
  */

 #ifndef CONFIG_SYS_PCI_MSTR_MEM_LOCAL
 #define PCI_MSTR_MEM_LOCAL 0x80000000	/* Local base */
 #else
 #define PCI_MSTR_MEM_LOCAL CONFIG_SYS_PCI_MSTR_MEM_LOCAL
 #endif

 #ifndef CONFIG_SYS_PCI_MSTR_MEM_BUS
 #define PCI_MSTR_MEM_BUS 0x80000000	/* PCI base   */
 #else
 #define PCI_MSTR_MEM_BUS CONFIG_SYS_PCI_MSTR_MEM_BUS
 #endif

 #ifndef CONFIG_SYS_CPU_PCI_MEM_START
 #define CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL
 #else
 #define CPU_PCI_MEM_START CONFIG_SYS_CPU_PCI_MEM_START
 #endif

 #ifndef CONFIG_SYS_PCI_MSTR_MEM_SIZE
 #define PCI_MSTR_MEM_SIZE 0x10000000	/* 256MB */
 #else
 #define PCI_MSTR_MEM_SIZE CONFIG_SYS_PCI_MSTR_MEM_SIZE
 #endif

 #ifndef CONFIG_SYS_POCMR0_MASK_ATTRIB
 #define POCMR0_MASK_ATTRIB	(POCMR_MASK_256MB | POCMR_ENABLE | POCMR_PREFETCH_EN)
 #else
 #define POCMR0_MASK_ATTRIB CONFIG_SYS_POCMR0_MASK_ATTRIB
 #endif

 /*
  * Master window that allows the CPU to access PCI Memory (non-prefetch).
  * This window will be setup with the second set of Outbound ATU registers
  * in the bridge.
  */

 #ifndef CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL
 #define PCI_MSTR_MEMIO_LOCAL 0x90000000 /* Local base */
 #else
 #define PCI_MSTR_MEMIO_LOCAL CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL
 #endif

 #ifndef CONFIG_SYS_PCI_MSTR_MEMIO_BUS
 #define PCI_MSTR_MEMIO_BUS 0x90000000	/* PCI base   */
 #else
 #define PCI_MSTR_MEMIO_BUS CONFIG_SYS_PCI_MSTR_MEMIO_BUS
 #endif

 #ifndef CONFIG_SYS_CPU_PCI_MEMIO_START
 #define CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL
 #else
 #define CPU_PCI_MEMIO_START CONFIG_SYS_CPU_PCI_MEMIO_START
 #endif

 #ifndef CONFIG_SYS_PCI_MSTR_MEMIO_SIZE
 #define PCI_MSTR_MEMIO_SIZE 0x10000000	/* 256 MB */
 #else
 #define PCI_MSTR_MEMIO_SIZE CONFIG_SYS_PCI_MSTR_MEMIO_SIZE
 #endif

 #ifndef CONFIG_SYS_POCMR1_MASK_ATTRIB
 #define POCMR1_MASK_ATTRIB	(POCMR_MASK_512MB | POCMR_ENABLE)
 #else
 #define POCMR1_MASK_ATTRIB CONFIG_SYS_POCMR1_MASK_ATTRIB
 #endif

 /*
  * Master window that allows the CPU to access PCI IO space.
  * This window will be setup with the third set of Outbound ATU registers
  * in the bridge.
  */

 #ifndef CONFIG_SYS_PCI_MSTR_IO_LOCAL
 #define PCI_MSTR_IO_LOCAL 0xA0000000	/* Local base */
 #else
 #define PCI_MSTR_IO_LOCAL CONFIG_SYS_PCI_MSTR_IO_LOCAL
 #endif

 #ifndef CONFIG_SYS_PCI_MSTR_IO_BUS
 #define PCI_MSTR_IO_BUS 0xA0000000	/* PCI base   */
 #else
 #define PCI_MSTR_IO_BUS CONFIG_SYS_PCI_MSTR_IO_BUS
 #endif

 #ifndef CONFIG_SYS_CPU_PCI_IO_START
 #define CPU_PCI_IO_START PCI_MSTR_IO_LOCAL
 #else
 #define CPU_PCI_IO_START CONFIG_SYS_CPU_PCI_IO_START
 #endif

 #ifndef CONFIG_SYS_PCI_MSTR_IO_SIZE
 #define PCI_MSTR_IO_SIZE 0x10000000	/* 256MB */
 #else
 #define PCI_MSTR_IO_SIZE CONFIG_SYS_PCI_MSTR_IO_SIZE
 #endif

 #ifndef CONFIG_SYS_POCMR2_MASK_ATTRIB
 #define POCMR2_MASK_ATTRIB	(POCMR_MASK_256MB | POCMR_ENABLE | POCMR_PCI_IO)
 #else
 #define POCMR2_MASK_ATTRIB CONFIG_SYS_POCMR2_MASK_ATTRIB
 #endif

 /* PCI bus configuration registers.
  */

 #define PCI_CLASS_BRIDGE_CTLR	0x06


 static inline void pci_outl (u32 addr, u32 data)
 {
 	*(volatile u32 *) addr = cpu_to_le32 (data);
 }

 void pci_mpc8250_init (struct pci_controller *hose)
 {
 	u16 tempShort;

 	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	pci_dev_t host_devno = PCI_BDF (0, 0, 0);

 	pci_setup_indirect (hose, CONFIG_SYS_IMMR + PCI_CFG_ADDR_REG,
 			    CONFIG_SYS_IMMR + PCI_CFG_DATA_REG);

 	/*
 	 * Setting required to enable local bus for PCI (SIUMCR [LBPC]).
 	 */
 #ifdef CONFIG_MPC8266ADS
 	immap->im_siu_conf.sc_siumcr =
 		(immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11)
 		| SIUMCR_LBPC01;
 #elif defined(CONFIG_ADSTYPE) && CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
 /* nothing to do for this board here */
 #elif defined CONFIG_MPC8272
 	immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr &
 				  ~SIUMCR_BBD &
 				  ~SIUMCR_ESE &
 				  ~SIUMCR_PBSE &
 				  ~SIUMCR_CDIS &
 				  ~SIUMCR_DPPC11 &
 				  ~SIUMCR_L2CPC11 &
 				  ~SIUMCR_LBPC11 &
 				  ~SIUMCR_APPC11 &
 				  ~SIUMCR_CS10PC11 &
 				  ~SIUMCR_BCTLC11 &
 				  ~SIUMCR_MMR11)
 				  | SIUMCR_DPPC11
 				  | SIUMCR_L2CPC01
 				  | SIUMCR_LBPC00
 				  | SIUMCR_APPC10
 				  | SIUMCR_CS10PC00
 				  | SIUMCR_BCTLC00
 				  | SIUMCR_MMR11;
 #elif defined(CONFIG_TQM8272)
 /* nothing to do for this Board here */
 #else
 	/*
 	 * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
 	 * and local bus for PCI (SIUMCR [LBPC]).
 	 */
 	immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr &
 						~SIUMCR_LBPC11 &
 						~SIUMCR_CS10PC11 &
 						~SIUMCR_LBPC11) |
 					SIUMCR_LBPC01 |
 					SIUMCR_CS10PC01 |
 					SIUMCR_APPC10;
 #endif

 	/* Make PCI lowest priority */
 	/* Each 4 bits is a device bus request	and the MS 4bits
 	   is highest priority */
 	/* Bus		     4bit value
 	   ---		     ----------
 	   CPM high	     0b0000
 	   CPM middle	     0b0001
 	   CPM low	     0b0010
 	   PCI reguest	     0b0011
 	   Reserved	     0b0100
 	   Reserved	     0b0101
 	   Internal Core     0b0110
 	   External Master 1 0b0111
 	   External Master 2 0b1000
 	   External Master 3 0b1001
 	   The rest are reserved */
 	immap->im_siu_conf.sc_ppc_alrh = 0x61207893;

 	/* Park bus on core while modifying PCI Bus accesses */
 	immap->im_siu_conf.sc_ppc_acr = 0x6;

 	/*
 	 * Set up master windows that allow the CPU to access PCI space. These
 	 * windows are set up using the two SIU PCIBR registers.
 	 */
 	immap->im_memctl.memc_pcimsk0 = PCIMSK0_MASK;
 	immap->im_memctl.memc_pcibr0 = PCI_MSTR0_LOCAL | PCIBR_ENABLE;

 #if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272
 	immap->im_memctl.memc_pcimsk1 = PCIMSK1_MASK;
 	immap->im_memctl.memc_pcibr1 = PCI_MSTR1_LOCAL | PCIBR_ENABLE;
 #endif

 	/* Release PCI RST (by default the PCI RST signal is held low)	*/
 	immap->im_pci.pci_gcr = cpu_to_le32 (PCIGCR_PCI_BUS_EN);

 	/* give it some time */
 	{
 #if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272
 		/* Give the PCI cards more time to initialize before query
 		   This might be good for other boards also
 		 */
 		int i;

 		for (i = 0; i < 1000; ++i)
 #endif
 			udelay (1000);
 	}

 	/*
 	 * Set up master window that allows the CPU to access PCI Memory (prefetch)
 	 * space. This window is set up using the first set of Outbound ATU registers.
 	 */
 	immap->im_pci.pci_potar0 = cpu_to_le32 (PCI_MSTR_MEM_BUS >> 12);	/* PCI base */
 	immap->im_pci.pci_pobar0 = cpu_to_le32 (PCI_MSTR_MEM_LOCAL >> 12);	/* Local base */
 	immap->im_pci.pci_pocmr0 = cpu_to_le32 (POCMR0_MASK_ATTRIB);	/* Size & attribute */

 	/*
 	 * Set up master window that allows the CPU to access PCI Memory (non-prefetch)
 	 * space. This window is set up using the second set of Outbound ATU registers.
 	 */
 	immap->im_pci.pci_potar1 = cpu_to_le32 (PCI_MSTR_MEMIO_BUS >> 12);	/* PCI base */
 	immap->im_pci.pci_pobar1 = cpu_to_le32 (PCI_MSTR_MEMIO_LOCAL >> 12);	/* Local base */
 	immap->im_pci.pci_pocmr1 = cpu_to_le32 (POCMR1_MASK_ATTRIB);	/* Size & attribute */

 	/*
 	 * Set up master window that allows the CPU to access PCI IO space. This window
 	 * is set up using the third set of Outbound ATU registers.
 	 */
 	immap->im_pci.pci_potar2 = cpu_to_le32 (PCI_MSTR_IO_BUS >> 12); /* PCI base */
 	immap->im_pci.pci_pobar2 = cpu_to_le32 (PCI_MSTR_IO_LOCAL >> 12);	/* Local base */
 	immap->im_pci.pci_pocmr2 = cpu_to_le32 (POCMR2_MASK_ATTRIB);	/* Size & attribute */

 	/*
 	 * Set up slave window that allows PCI masters to access MPC826x local memory.
 	 * This window is set up using the first set of Inbound ATU registers
 	 */
 	immap->im_pci.pci_pitar0 = cpu_to_le32 (PCI_SLV_MEM_LOCAL >> 12);	/* PCI base */
 	immap->im_pci.pci_pibar0 = cpu_to_le32 (PCI_SLV_MEM_BUS >> 12); /* Local base */
 	immap->im_pci.pci_picmr0 = cpu_to_le32 (PICMR0_MASK_ATTRIB);	/* Size & attribute */

 	/* See above for description - puts PCI request as highest priority */
 #ifdef CONFIG_MPC8272
 	immap->im_siu_conf.sc_ppc_alrh = 0x01236745;
 #else
 	immap->im_siu_conf.sc_ppc_alrh = 0x03124567;
 #endif

 	/* Park the bus on the PCI */
 	immap->im_siu_conf.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;

 	/* Host mode - specify the bridge as a host-PCI bridge */

 	pci_hose_write_config_byte (hose, host_devno, PCI_CLASS_CODE,
 				    PCI_CLASS_BRIDGE_CTLR);

 	/* Enable the host bridge to be a master on the PCI bus, and to act as a PCI memory target */
 	pci_hose_read_config_word (hose, host_devno, PCI_COMMAND, &tempShort);
 	pci_hose_write_config_word (hose, host_devno, PCI_COMMAND,
 				    tempShort | PCI_COMMAND_MASTER |
 				    PCI_COMMAND_MEMORY);

 	/* do some bridge init, should be done on all 8260 based bridges */
 	pci_hose_write_config_byte (hose, host_devno, PCI_CACHE_LINE_SIZE,
 				    0x08);
 	pci_hose_write_config_byte (hose, host_devno, PCI_LATENCY_TIMER,
 				    0xF8);

 	hose->first_busno = 0;
 	hose->last_busno = 0xff;

 	/* System memory space */
 #if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272 || defined CONFIG_PM826
 	pci_set_region (hose->regions + 0,
 			PCI_SLV_MEM_BUS,
 			PCI_SLV_MEM_LOCAL,
 			gd->ram_size, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
 #else
 	pci_set_region (hose->regions + 0,
 			CONFIG_SYS_SDRAM_BASE,
 			CONFIG_SYS_SDRAM_BASE,
 			0x4000000, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
 #endif

 	/* PCI memory space */
 #if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272
 	pci_set_region (hose->regions + 1,
 			PCI_MSTR_MEMIO_BUS,
 			PCI_MSTR_MEMIO_LOCAL,
 			PCI_MSTR_MEMIO_SIZE, PCI_REGION_MEM);
 #else
 	pci_set_region (hose->regions + 1,
 			PCI_MSTR_MEM_BUS,
 			PCI_MSTR_MEM_LOCAL,
 			PCI_MSTR_MEM_SIZE, PCI_REGION_MEM);
 #endif

 	/* PCI I/O space */
 	pci_set_region (hose->regions + 2,
 			PCI_MSTR_IO_BUS,
 			PCI_MSTR_IO_LOCAL, PCI_MSTR_IO_SIZE, PCI_REGION_IO);

 	hose->region_count = 3;

 	pci_register_hose (hose);
 	/* Mask off master abort machine checks */
 	immap->im_pci.pci_emr &= cpu_to_le32 (~PCI_ERROR_PCI_NO_RSP);
 	eieio ();

 	hose->last_busno = pci_hose_scan (hose);


 	/* clear the error in the error status register */
 	immap->im_pci.pci_esr = cpu_to_le32 (PCI_ERROR_PCI_NO_RSP);

 	/* unmask master abort machine checks */
 	immap->im_pci.pci_emr |= cpu_to_le32 (PCI_ERROR_PCI_NO_RSP);
 }

 #if defined(CONFIG_OF_LIBFDT)
 void ft_pci_setup(void *blob, bd_t *bd)
 {
 	do_fixup_by_prop_u32(blob, "device_type", "pci", 4,
 		"clock-frequency", gd->pci_clk, 1);
 }
 #endif

 #endif /* CONFIG_PCI */
	/*
	* (C) Copyright 2003
	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	*
	* Copyright (c) 2005 MontaVista Software, Inc.
	* Vitaly Bordug <vbordug@ru.mvista.com>
	* Added support for PCI bridge on MPC8272ADS
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#include <common.h>

	#ifdef CONFIG_PCI

	#include <pci.h>
	#include <mpc8260.h>
	#include <asm/m8260_pci.h>
	#include <asm/io.h>
	#ifdef CONFIG_OF_LIBFDT
	#include <libfdt.h>
	#include <fdt_support.h>
	#endif

	#if defined CONFIG_MPC8266ADS \|\| defined CONFIG_MPC8272 \|\| defined CONFIG_PM826
	DECLARE_GLOBAL_DATA_PTR;
	#endif

	/*
	* Local->PCI map (from CPU) controlled by
	* MPC826x master window
	*
	* 0x80000000 - 0xBFFFFFFF CPU2PCI space PCIBR0
	* 0xF4000000 - 0xF7FFFFFF CPU2PCI space PCIBR1
	*
	* 0x80000000 - 0x9FFFFFFF 0x80000000 - 0x9FFFFFFF (Outbound ATU #1)
	* PCI Mem with prefetch
	*
	* 0xA0000000 - 0xBFFFFFFF 0xA0000000 - 0xBFFFFFFF (Outbound ATU #2)
	* PCI Mem w/o prefetch
	*
	* 0xF4000000 - 0xF7FFFFFF 0x00000000 - 0x03FFFFFF (Outbound ATU #3)
	* 32-bit PCI IO
	*
	* PCI->Local map (from PCI)
	* MPC826x slave window controlled by
	*
	* 0x00000000 - 0x1FFFFFFF 0x00000000 - 0x1FFFFFFF (Inbound ATU #1)
	* MPC826x local memory
	*/

	/*
	* Slave window that allows PCI masters to access MPC826x local memory.
	* This window is set up using the first set of Inbound ATU registers
	*/

	#ifndef CONFIG_SYS_PCI_SLV_MEM_LOCAL
	#define PCI_SLV_MEM_LOCAL CONFIG_SYS_SDRAM_BASE /* Local base */
	#else
	#define PCI_SLV_MEM_LOCAL CONFIG_SYS_PCI_SLV_MEM_LOCAL
	#endif

	#ifndef CONFIG_SYS_PCI_SLV_MEM_BUS
	#define PCI_SLV_MEM_BUS 0x00000000 /* PCI base */
	#else
	#define PCI_SLV_MEM_BUS CONFIG_SYS_PCI_SLV_MEM_BUS
	#endif

	#ifndef CONFIG_SYS_PICMR0_MASK_ATTRIB
	#define PICMR0_MASK_ATTRIB (PICMR_MASK_512MB \| PICMR_ENABLE \| \
	PICMR_PREFETCH_EN)
	#else
	#define PICMR0_MASK_ATTRIB CONFIG_SYS_PICMR0_MASK_ATTRIB
	#endif

	/*
	* These are the windows that allow the CPU to access PCI address space.
	* All three PCI master windows, which allow the CPU to access PCI
	* prefetch, non prefetch, and IO space (see below), must all fit within
	* these windows.
	*/

	/* PCIBR0 */
	#ifndef CONFIG_SYS_PCI_MSTR0_LOCAL
	#define PCI_MSTR0_LOCAL 0x80000000 /* Local base */
	#else
	#define PCI_MSTR0_LOCAL CONFIG_SYS_PCI_MSTR0_LOCAL
	#endif

	#ifndef CONFIG_SYS_PCIMSK0_MASK
	#define PCIMSK0_MASK PCIMSK_1GB /* Size of window */
	#else
	#define PCIMSK0_MASK CONFIG_SYS_PCIMSK0_MASK
	#endif

	/* PCIBR1 */
	#ifndef CONFIG_SYS_PCI_MSTR1_LOCAL
	#define PCI_MSTR1_LOCAL 0xF4000000 /* Local base */
	#else
	#define PCI_MSTR1_LOCAL CONFIG_SYS_PCI_MSTR1_LOCAL
	#endif

	#ifndef CONFIG_SYS_PCIMSK1_MASK
	#define PCIMSK1_MASK PCIMSK_64MB /* Size of window */
	#else
	#define PCIMSK1_MASK CONFIG_SYS_PCIMSK1_MASK
	#endif

	/*
	* Master window that allows the CPU to access PCI Memory (prefetch).
	* This window will be setup with the first set of Outbound ATU registers
	* in the bridge.
	*/

	#ifndef CONFIG_SYS_PCI_MSTR_MEM_LOCAL
	#define PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */
	#else
	#define PCI_MSTR_MEM_LOCAL CONFIG_SYS_PCI_MSTR_MEM_LOCAL
	#endif

	#ifndef CONFIG_SYS_PCI_MSTR_MEM_BUS
	#define PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */
	#else
	#define PCI_MSTR_MEM_BUS CONFIG_SYS_PCI_MSTR_MEM_BUS
	#endif

	#ifndef CONFIG_SYS_CPU_PCI_MEM_START
	#define CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL
	#else
	#define CPU_PCI_MEM_START CONFIG_SYS_CPU_PCI_MEM_START
	#endif

	#ifndef CONFIG_SYS_PCI_MSTR_MEM_SIZE
	#define PCI_MSTR_MEM_SIZE 0x10000000 /* 256MB */
	#else
	#define PCI_MSTR_MEM_SIZE CONFIG_SYS_PCI_MSTR_MEM_SIZE
	#endif

	#ifndef CONFIG_SYS_POCMR0_MASK_ATTRIB
	#define POCMR0_MASK_ATTRIB (POCMR_MASK_256MB \| POCMR_ENABLE \| POCMR_PREFETCH_EN)
	#else
	#define POCMR0_MASK_ATTRIB CONFIG_SYS_POCMR0_MASK_ATTRIB
	#endif

	/*
	* Master window that allows the CPU to access PCI Memory (non-prefetch).
	* This window will be setup with the second set of Outbound ATU registers
	* in the bridge.
	*/

	#ifndef CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL
	#define PCI_MSTR_MEMIO_LOCAL 0x90000000 /* Local base */
	#else
	#define PCI_MSTR_MEMIO_LOCAL CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL
	#endif

	#ifndef CONFIG_SYS_PCI_MSTR_MEMIO_BUS
	#define PCI_MSTR_MEMIO_BUS 0x90000000 /* PCI base */
	#else
	#define PCI_MSTR_MEMIO_BUS CONFIG_SYS_PCI_MSTR_MEMIO_BUS
	#endif

	#ifndef CONFIG_SYS_CPU_PCI_MEMIO_START
	#define CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL
	#else
	#define CPU_PCI_MEMIO_START CONFIG_SYS_CPU_PCI_MEMIO_START
	#endif

	#ifndef CONFIG_SYS_PCI_MSTR_MEMIO_SIZE
	#define PCI_MSTR_MEMIO_SIZE 0x10000000 /* 256 MB */
	#else
	#define PCI_MSTR_MEMIO_SIZE CONFIG_SYS_PCI_MSTR_MEMIO_SIZE
	#endif

	#ifndef CONFIG_SYS_POCMR1_MASK_ATTRIB
	#define POCMR1_MASK_ATTRIB (POCMR_MASK_512MB \| POCMR_ENABLE)
	#else
	#define POCMR1_MASK_ATTRIB CONFIG_SYS_POCMR1_MASK_ATTRIB
	#endif

	/*
	* Master window that allows the CPU to access PCI IO space.
	* This window will be setup with the third set of Outbound ATU registers
	* in the bridge.
	*/

	#ifndef CONFIG_SYS_PCI_MSTR_IO_LOCAL
	#define PCI_MSTR_IO_LOCAL 0xA0000000 /* Local base */
	#else
	#define PCI_MSTR_IO_LOCAL CONFIG_SYS_PCI_MSTR_IO_LOCAL
	#endif

	#ifndef CONFIG_SYS_PCI_MSTR_IO_BUS
	#define PCI_MSTR_IO_BUS 0xA0000000 /* PCI base */
	#else
	#define PCI_MSTR_IO_BUS CONFIG_SYS_PCI_MSTR_IO_BUS
	#endif

	#ifndef CONFIG_SYS_CPU_PCI_IO_START
	#define CPU_PCI_IO_START PCI_MSTR_IO_LOCAL
	#else
	#define CPU_PCI_IO_START CONFIG_SYS_CPU_PCI_IO_START
	#endif

	#ifndef CONFIG_SYS_PCI_MSTR_IO_SIZE
	#define PCI_MSTR_IO_SIZE 0x10000000 /* 256MB */
	#else
	#define PCI_MSTR_IO_SIZE CONFIG_SYS_PCI_MSTR_IO_SIZE
	#endif

	#ifndef CONFIG_SYS_POCMR2_MASK_ATTRIB
	#define POCMR2_MASK_ATTRIB (POCMR_MASK_256MB \| POCMR_ENABLE \| POCMR_PCI_IO)
	#else
	#define POCMR2_MASK_ATTRIB CONFIG_SYS_POCMR2_MASK_ATTRIB
	#endif

	/* PCI bus configuration registers.
	*/

	#define PCI_CLASS_BRIDGE_CTLR 0x06


	static inline void pci_outl (u32 addr, u32 data)
	{
	(volatile u32 ) addr = cpu_to_le32 (data);
	}

	void pci_mpc8250_init (struct pci_controller *hose)
	{
	u16 tempShort;

	volatile immap_t immap = (immap_t ) CONFIG_SYS_IMMR;
	pci_dev_t host_devno = PCI_BDF (0, 0, 0);

	pci_setup_indirect (hose, CONFIG_SYS_IMMR + PCI_CFG_ADDR_REG,
	CONFIG_SYS_IMMR + PCI_CFG_DATA_REG);

	/*
	* Setting required to enable local bus for PCI (SIUMCR [LBPC]).
	*/
	#ifdef CONFIG_MPC8266ADS
	immap->im_siu_conf.sc_siumcr =
	(immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11)
	\| SIUMCR_LBPC01;
	#elif defined(CONFIG_ADSTYPE) && CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
	/* nothing to do for this board here */
	#elif defined CONFIG_MPC8272
	immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr &
	~SIUMCR_BBD &
	~SIUMCR_ESE &
	~SIUMCR_PBSE &
	~SIUMCR_CDIS &
	~SIUMCR_DPPC11 &
	~SIUMCR_L2CPC11 &
	~SIUMCR_LBPC11 &
	~SIUMCR_APPC11 &
	~SIUMCR_CS10PC11 &
	~SIUMCR_BCTLC11 &
	~SIUMCR_MMR11)
	\| SIUMCR_DPPC11
	\| SIUMCR_L2CPC01
	\| SIUMCR_LBPC00
	\| SIUMCR_APPC10
	\| SIUMCR_CS10PC00
	\| SIUMCR_BCTLC00
	\| SIUMCR_MMR11;
	#elif defined(CONFIG_TQM8272)
	/* nothing to do for this Board here */
	#else
	/*
	* Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
	* and local bus for PCI (SIUMCR [LBPC]).
	*/
	immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr &
	~SIUMCR_LBPC11 &
	~SIUMCR_CS10PC11 &
	~SIUMCR_LBPC11) \|
	SIUMCR_LBPC01 \|
	SIUMCR_CS10PC01 \|
	SIUMCR_APPC10;
	#endif

	/* Make PCI lowest priority */
	/* Each 4 bits is a device bus request and the MS 4bits
	is highest priority */
	/* Bus 4bit value
	--- ----------
	CPM high 0b0000
	CPM middle 0b0001
	CPM low 0b0010
	PCI reguest 0b0011
	Reserved 0b0100
	Reserved 0b0101
	Internal Core 0b0110
	External Master 1 0b0111
	External Master 2 0b1000
	External Master 3 0b1001
	The rest are reserved */
	immap->im_siu_conf.sc_ppc_alrh = 0x61207893;

	/* Park bus on core while modifying PCI Bus accesses */
	immap->im_siu_conf.sc_ppc_acr = 0x6;

	/*
	* Set up master windows that allow the CPU to access PCI space. These
	* windows are set up using the two SIU PCIBR registers.
	*/
	immap->im_memctl.memc_pcimsk0 = PCIMSK0_MASK;
	immap->im_memctl.memc_pcibr0 = PCI_MSTR0_LOCAL \| PCIBR_ENABLE;

	#if defined CONFIG_MPC8266ADS \|\| defined CONFIG_MPC8272
	immap->im_memctl.memc_pcimsk1 = PCIMSK1_MASK;
	immap->im_memctl.memc_pcibr1 = PCI_MSTR1_LOCAL \| PCIBR_ENABLE;
	#endif

	/* Release PCI RST (by default the PCI RST signal is held low) */
	immap->im_pci.pci_gcr = cpu_to_le32 (PCIGCR_PCI_BUS_EN);

	/* give it some time */
	{
	#if defined CONFIG_MPC8266ADS \|\| defined CONFIG_MPC8272
	/* Give the PCI cards more time to initialize before query
	This might be good for other boards also
	*/
	int i;

	for (i = 0; i < 1000; ++i)
	#endif
	udelay (1000);
	}

	/*
	* Set up master window that allows the CPU to access PCI Memory (prefetch)
	* space. This window is set up using the first set of Outbound ATU registers.
	*/
	immap->im_pci.pci_potar0 = cpu_to_le32 (PCI_MSTR_MEM_BUS >> 12); /* PCI base */
	immap->im_pci.pci_pobar0 = cpu_to_le32 (PCI_MSTR_MEM_LOCAL >> 12); /* Local base */
	immap->im_pci.pci_pocmr0 = cpu_to_le32 (POCMR0_MASK_ATTRIB); /* Size & attribute */

	/*
	* Set up master window that allows the CPU to access PCI Memory (non-prefetch)
	* space. This window is set up using the second set of Outbound ATU registers.
	*/
	immap->im_pci.pci_potar1 = cpu_to_le32 (PCI_MSTR_MEMIO_BUS >> 12); /* PCI base */
	immap->im_pci.pci_pobar1 = cpu_to_le32 (PCI_MSTR_MEMIO_LOCAL >> 12); /* Local base */
	immap->im_pci.pci_pocmr1 = cpu_to_le32 (POCMR1_MASK_ATTRIB); /* Size & attribute */

	/*
	* Set up master window that allows the CPU to access PCI IO space. This window
	* is set up using the third set of Outbound ATU registers.
	*/
	immap->im_pci.pci_potar2 = cpu_to_le32 (PCI_MSTR_IO_BUS >> 12); /* PCI base */
	immap->im_pci.pci_pobar2 = cpu_to_le32 (PCI_MSTR_IO_LOCAL >> 12); /* Local base */
	immap->im_pci.pci_pocmr2 = cpu_to_le32 (POCMR2_MASK_ATTRIB); /* Size & attribute */

	/*
	* Set up slave window that allows PCI masters to access MPC826x local memory.
	* This window is set up using the first set of Inbound ATU registers
	*/
	immap->im_pci.pci_pitar0 = cpu_to_le32 (PCI_SLV_MEM_LOCAL >> 12); /* PCI base */
	immap->im_pci.pci_pibar0 = cpu_to_le32 (PCI_SLV_MEM_BUS >> 12); /* Local base */
	immap->im_pci.pci_picmr0 = cpu_to_le32 (PICMR0_MASK_ATTRIB); /* Size & attribute */

	/* See above for description - puts PCI request as highest priority */
	#ifdef CONFIG_MPC8272
	immap->im_siu_conf.sc_ppc_alrh = 0x01236745;
	#else
	immap->im_siu_conf.sc_ppc_alrh = 0x03124567;
	#endif

	/* Park the bus on the PCI */
	immap->im_siu_conf.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;

	/* Host mode - specify the bridge as a host-PCI bridge */

	pci_hose_write_config_byte (hose, host_devno, PCI_CLASS_CODE,
	PCI_CLASS_BRIDGE_CTLR);

	/* Enable the host bridge to be a master on the PCI bus, and to act as a PCI memory target */
	pci_hose_read_config_word (hose, host_devno, PCI_COMMAND, &tempShort);
	pci_hose_write_config_word (hose, host_devno, PCI_COMMAND,
	tempShort \| PCI_COMMAND_MASTER \|
	PCI_COMMAND_MEMORY);

	/* do some bridge init, should be done on all 8260 based bridges */
	pci_hose_write_config_byte (hose, host_devno, PCI_CACHE_LINE_SIZE,
	0x08);
	pci_hose_write_config_byte (hose, host_devno, PCI_LATENCY_TIMER,
	0xF8);

	hose->first_busno = 0;
	hose->last_busno = 0xff;

	/* System memory space */
	#if defined CONFIG_MPC8266ADS \|\| defined CONFIG_MPC8272 \|\| defined CONFIG_PM826
	pci_set_region (hose->regions + 0,
	PCI_SLV_MEM_BUS,
	PCI_SLV_MEM_LOCAL,
	gd->ram_size, PCI_REGION_MEM \| PCI_REGION_SYS_MEMORY);
	#else
	pci_set_region (hose->regions + 0,
	CONFIG_SYS_SDRAM_BASE,
	CONFIG_SYS_SDRAM_BASE,
	0x4000000, PCI_REGION_MEM \| PCI_REGION_SYS_MEMORY);
	#endif

	/* PCI memory space */
	#if defined CONFIG_MPC8266ADS \|\| defined CONFIG_MPC8272
	pci_set_region (hose->regions + 1,
	PCI_MSTR_MEMIO_BUS,
	PCI_MSTR_MEMIO_LOCAL,
	PCI_MSTR_MEMIO_SIZE, PCI_REGION_MEM);
	#else
	pci_set_region (hose->regions + 1,
	PCI_MSTR_MEM_BUS,
	PCI_MSTR_MEM_LOCAL,
	PCI_MSTR_MEM_SIZE, PCI_REGION_MEM);
	#endif

	/* PCI I/O space */
	pci_set_region (hose->regions + 2,
	PCI_MSTR_IO_BUS,
	PCI_MSTR_IO_LOCAL, PCI_MSTR_IO_SIZE, PCI_REGION_IO);

	hose->region_count = 3;

	pci_register_hose (hose);
	/* Mask off master abort machine checks */
	immap->im_pci.pci_emr &= cpu_to_le32 (~PCI_ERROR_PCI_NO_RSP);
	eieio ();

	hose->last_busno = pci_hose_scan (hose);


	/* clear the error in the error status register */
	immap->im_pci.pci_esr = cpu_to_le32 (PCI_ERROR_PCI_NO_RSP);

	/* unmask master abort machine checks */
	immap->im_pci.pci_emr \|= cpu_to_le32 (PCI_ERROR_PCI_NO_RSP);
	}

	#if defined(CONFIG_OF_LIBFDT)
	void ft_pci_setup(void blob, bd_t bd)
	{
	do_fixup_by_prop_u32(blob, "device_type", "pci", 4,
	"clock-frequency", gd->pci_clk, 1);
	}
	#endif

	#endif /* CONFIG_PCI */