| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2019 Rockchip Electronics Co., Ltd |
| */ |
| |
| #include <dm.h> |
| #include <log.h> |
| #include <dm/pinctrl.h> |
| #include <regmap.h> |
| #include <syscon.h> |
| #include <fdtdec.h> |
| #include <linux/bitops.h> |
| #include <linux/libfdt.h> |
| |
| #include "pinctrl-rockchip.h" |
| |
| #define MAX_ROCKCHIP_PINS_ENTRIES 30 |
| #define MAX_ROCKCHIP_GPIO_PER_BANK 32 |
| #define RK_FUNC_GPIO 0 |
| |
| static int rockchip_verify_config(struct udevice *dev, u32 bank, u32 pin) |
| { |
| struct rockchip_pinctrl_priv *priv = dev_get_priv(dev); |
| struct rockchip_pin_ctrl *ctrl = priv->ctrl; |
| |
| if (bank >= ctrl->nr_banks) { |
| debug("pin conf bank %d >= nbanks %d\n", bank, ctrl->nr_banks); |
| return -EINVAL; |
| } |
| |
| if (pin >= MAX_ROCKCHIP_GPIO_PER_BANK) { |
| debug("pin conf pin %d >= %d\n", pin, |
| MAX_ROCKCHIP_GPIO_PER_BANK); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| void rockchip_get_recalced_mux(struct rockchip_pin_bank *bank, int pin, |
| int *reg, u8 *bit, int *mask) |
| { |
| struct rockchip_pinctrl_priv *priv = bank->priv; |
| struct rockchip_pin_ctrl *ctrl = priv->ctrl; |
| struct rockchip_mux_recalced_data *data; |
| int i; |
| |
| for (i = 0; i < ctrl->niomux_recalced; i++) { |
| data = &ctrl->iomux_recalced[i]; |
| if (data->num == bank->bank_num && |
| data->pin == pin) |
| break; |
| } |
| |
| if (i >= ctrl->niomux_recalced) |
| return; |
| |
| *reg = data->reg; |
| *mask = data->mask; |
| *bit = data->bit; |
| } |
| |
| static enum rockchip_pin_route_type |
| rockchip_get_mux_route(struct rockchip_pin_bank *bank, int pin, |
| int mux, u32 *reg, u32 *value) |
| { |
| struct rockchip_pinctrl_priv *priv = bank->priv; |
| struct rockchip_pin_ctrl *ctrl = priv->ctrl; |
| struct rockchip_mux_route_data *data; |
| int i; |
| |
| for (i = 0; i < ctrl->niomux_routes; i++) { |
| data = &ctrl->iomux_routes[i]; |
| if (data->bank_num == bank->bank_num && |
| data->pin == pin && data->func == mux) |
| break; |
| } |
| |
| if (i >= ctrl->niomux_routes) |
| return ROUTE_TYPE_INVALID; |
| |
| *reg = data->route_offset; |
| *value = data->route_val; |
| |
| return data->route_type; |
| } |
| |
| int rockchip_get_mux_data(int mux_type, int pin, u8 *bit, int *mask) |
| { |
| int offset = 0; |
| |
| if (mux_type & IOMUX_WIDTH_4BIT) { |
| if ((pin % 8) >= 4) |
| offset = 0x4; |
| *bit = (pin % 4) * 4; |
| *mask = 0xf; |
| } else if (mux_type & IOMUX_WIDTH_3BIT) { |
| /* |
| * pin0 ~ pin4 are at first register, and |
| * pin5 ~ pin7 are at second register. |
| */ |
| if ((pin % 8) >= 5) |
| offset = 0x4; |
| *bit = (pin % 8 % 5) * 3; |
| *mask = 0x7; |
| } else { |
| *bit = (pin % 8) * 2; |
| *mask = 0x3; |
| } |
| |
| return offset; |
| } |
| |
| static int rockchip_get_mux(struct rockchip_pin_bank *bank, int pin) |
| { |
| struct rockchip_pinctrl_priv *priv = bank->priv; |
| int iomux_num = (pin / 8); |
| struct regmap *regmap; |
| unsigned int val; |
| int reg, ret, mask, mux_type; |
| u8 bit; |
| |
| if (iomux_num > 3) |
| return -EINVAL; |
| |
| if (bank->iomux[iomux_num].type & IOMUX_UNROUTED) { |
| debug("pin %d is unrouted\n", pin); |
| return -EINVAL; |
| } |
| |
| if (bank->iomux[iomux_num].type & IOMUX_GPIO_ONLY) |
| return RK_FUNC_GPIO; |
| |
| regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU) |
| ? priv->regmap_pmu : priv->regmap_base; |
| |
| /* get basic quadrupel of mux registers and the correct reg inside */ |
| mux_type = bank->iomux[iomux_num].type; |
| reg = bank->iomux[iomux_num].offset; |
| reg += rockchip_get_mux_data(mux_type, pin, &bit, &mask); |
| |
| if (bank->recalced_mask & BIT(pin)) |
| rockchip_get_recalced_mux(bank, pin, ®, &bit, &mask); |
| |
| ret = regmap_read(regmap, reg, &val); |
| if (ret) |
| return ret; |
| |
| return ((val >> bit) & mask); |
| } |
| |
| static int rockchip_pinctrl_get_gpio_mux(struct udevice *dev, int banknum, |
| int index) |
| { struct rockchip_pinctrl_priv *priv = dev_get_priv(dev); |
| struct rockchip_pin_ctrl *ctrl = priv->ctrl; |
| |
| return rockchip_get_mux(&ctrl->pin_banks[banknum], index); |
| } |
| |
| static int rockchip_verify_mux(struct rockchip_pin_bank *bank, |
| int pin, int mux) |
| { |
| int iomux_num = (pin / 8); |
| |
| if (iomux_num > 3) |
| return -EINVAL; |
| |
| if (bank->iomux[iomux_num].type & IOMUX_UNROUTED) { |
| debug("pin %d is unrouted\n", pin); |
| return -EINVAL; |
| } |
| |
| if (bank->iomux[iomux_num].type & IOMUX_GPIO_ONLY) { |
| if (mux != IOMUX_GPIO_ONLY) { |
| debug("pin %d only supports a gpio mux\n", pin); |
| return -ENOTSUPP; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Set a new mux function for a pin. |
| * |
| * The register is divided into the upper and lower 16 bit. When changing |
| * a value, the previous register value is not read and changed. Instead |
| * it seems the changed bits are marked in the upper 16 bit, while the |
| * changed value gets set in the same offset in the lower 16 bit. |
| * All pin settings seem to be 2 bit wide in both the upper and lower |
| * parts. |
| * @bank: pin bank to change |
| * @pin: pin to change |
| * @mux: new mux function to set |
| */ |
| static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux) |
| { |
| struct rockchip_pinctrl_priv *priv = bank->priv; |
| struct rockchip_pin_ctrl *ctrl = priv->ctrl; |
| int iomux_num = (pin / 8); |
| int ret; |
| |
| ret = rockchip_verify_mux(bank, pin, mux); |
| if (ret < 0) |
| return ret; |
| |
| if (bank->iomux[iomux_num].type & IOMUX_GPIO_ONLY) |
| return 0; |
| |
| debug("setting mux of GPIO%d-%d to %d\n", bank->bank_num, pin, mux); |
| |
| if (!ctrl->set_mux) |
| return -ENOTSUPP; |
| |
| ret = ctrl->set_mux(bank, pin, mux); |
| if (ret) |
| return ret; |
| |
| if (bank->route_mask & BIT(pin)) { |
| struct regmap *regmap; |
| u32 route_reg = 0, route_val = 0; |
| |
| ret = rockchip_get_mux_route(bank, pin, mux, |
| &route_reg, &route_val); |
| switch (ret) { |
| case ROUTE_TYPE_DEFAULT: |
| if (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU) |
| regmap = priv->regmap_pmu; |
| else if (bank->iomux[iomux_num].type & IOMUX_L_SOURCE_PMU) |
| regmap = (pin % 8 < 4) ? priv->regmap_pmu : priv->regmap_base; |
| else |
| regmap = priv->regmap_base; |
| |
| regmap_write(regmap, route_reg, route_val); |
| break; |
| case ROUTE_TYPE_TOPGRF: |
| regmap_write(priv->regmap_base, route_reg, route_val); |
| break; |
| case ROUTE_TYPE_PMUGRF: |
| regmap_write(priv->regmap_pmu, route_reg, route_val); |
| break; |
| case ROUTE_TYPE_INVALID: |
| fallthrough; |
| default: |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int rockchip_perpin_drv_list[DRV_TYPE_MAX][8] = { |
| { 2, 4, 8, 12, -1, -1, -1, -1 }, |
| { 3, 6, 9, 12, -1, -1, -1, -1 }, |
| { 5, 10, 15, 20, -1, -1, -1, -1 }, |
| { 4, 6, 8, 10, 12, 14, 16, 18 }, |
| { 4, 7, 10, 13, 16, 19, 22, 26 } |
| }; |
| |
| int rockchip_translate_drive_value(int type, int strength) |
| { |
| int i, ret; |
| |
| ret = -EINVAL; |
| for (i = 0; i < ARRAY_SIZE(rockchip_perpin_drv_list[type]); i++) { |
| if (rockchip_perpin_drv_list[type][i] == strength) { |
| ret = i; |
| break; |
| } else if (rockchip_perpin_drv_list[type][i] < 0) { |
| ret = rockchip_perpin_drv_list[type][i]; |
| break; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int rockchip_set_drive_perpin(struct rockchip_pin_bank *bank, |
| int pin_num, int strength) |
| { |
| struct rockchip_pinctrl_priv *priv = bank->priv; |
| struct rockchip_pin_ctrl *ctrl = priv->ctrl; |
| |
| debug("setting drive of GPIO%d-%d to %d\n", bank->bank_num, |
| pin_num, strength); |
| |
| if (!ctrl->set_drive) |
| return -ENOTSUPP; |
| |
| return ctrl->set_drive(bank, pin_num, strength); |
| } |
| |
| static int rockchip_pull_list[PULL_TYPE_MAX][4] = { |
| { |
| PIN_CONFIG_BIAS_DISABLE, |
| PIN_CONFIG_BIAS_PULL_UP, |
| PIN_CONFIG_BIAS_PULL_DOWN, |
| PIN_CONFIG_BIAS_BUS_HOLD |
| }, |
| { |
| PIN_CONFIG_BIAS_DISABLE, |
| PIN_CONFIG_BIAS_PULL_DOWN, |
| PIN_CONFIG_BIAS_DISABLE, |
| PIN_CONFIG_BIAS_PULL_UP |
| }, |
| }; |
| |
| int rockchip_translate_pull_value(int type, int pull) |
| { |
| int i, ret; |
| |
| ret = -EINVAL; |
| for (i = 0; i < ARRAY_SIZE(rockchip_pull_list[type]); |
| i++) { |
| if (rockchip_pull_list[type][i] == pull) { |
| ret = i; |
| break; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int rockchip_set_pull(struct rockchip_pin_bank *bank, |
| int pin_num, int pull) |
| { |
| struct rockchip_pinctrl_priv *priv = bank->priv; |
| struct rockchip_pin_ctrl *ctrl = priv->ctrl; |
| |
| debug("setting pull of GPIO%d-%d to %d\n", bank->bank_num, |
| pin_num, pull); |
| |
| if (!ctrl->set_pull) |
| return -ENOTSUPP; |
| |
| return ctrl->set_pull(bank, pin_num, pull); |
| } |
| |
| static int rockchip_set_schmitt(struct rockchip_pin_bank *bank, |
| int pin_num, int enable) |
| { |
| struct rockchip_pinctrl_priv *priv = bank->priv; |
| struct rockchip_pin_ctrl *ctrl = priv->ctrl; |
| |
| debug("setting input schmitt of GPIO%d-%d to %d\n", bank->bank_num, |
| pin_num, enable); |
| |
| if (!ctrl->set_schmitt) |
| return -ENOTSUPP; |
| |
| return ctrl->set_schmitt(bank, pin_num, enable); |
| } |
| |
| /* set the pin config settings for a specified pin */ |
| static int rockchip_pinconf_set(struct rockchip_pin_bank *bank, |
| u32 pin, u32 param, u32 arg) |
| { |
| int rc; |
| |
| switch (param) { |
| case PIN_CONFIG_BIAS_DISABLE: |
| case PIN_CONFIG_BIAS_PULL_UP: |
| case PIN_CONFIG_BIAS_PULL_DOWN: |
| case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: |
| case PIN_CONFIG_BIAS_BUS_HOLD: |
| rc = rockchip_set_pull(bank, pin, param); |
| if (rc) |
| return rc; |
| break; |
| |
| case PIN_CONFIG_DRIVE_STRENGTH: |
| rc = rockchip_set_drive_perpin(bank, pin, arg); |
| if (rc < 0) |
| return rc; |
| break; |
| |
| case PIN_CONFIG_INPUT_SCHMITT_ENABLE: |
| rc = rockchip_set_schmitt(bank, pin, arg); |
| if (rc < 0) |
| return rc; |
| break; |
| |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static const struct pinconf_param rockchip_conf_params[] = { |
| { "bias-disable", PIN_CONFIG_BIAS_DISABLE, 0 }, |
| { "bias-bus-hold", PIN_CONFIG_BIAS_BUS_HOLD, 0 }, |
| { "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 1 }, |
| { "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 1 }, |
| { "bias-pull-pin-default", PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, 1 }, |
| { "drive-strength", PIN_CONFIG_DRIVE_STRENGTH, 0 }, |
| { "input-schmitt-disable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 0 }, |
| { "input-schmitt-enable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 1 }, |
| }; |
| |
| static int rockchip_pinconf_prop_name_to_param(const char *property, |
| u32 *default_value) |
| { |
| const struct pinconf_param *p, *end; |
| |
| p = rockchip_conf_params; |
| end = p + sizeof(rockchip_conf_params) / sizeof(struct pinconf_param); |
| |
| /* See if this pctldev supports this parameter */ |
| for (; p < end; p++) { |
| if (!strcmp(property, p->property)) { |
| *default_value = p->default_value; |
| return p->param; |
| } |
| } |
| |
| *default_value = 0; |
| return -EPERM; |
| } |
| |
| static int rockchip_pinctrl_set_state(struct udevice *dev, |
| struct udevice *config) |
| { |
| struct rockchip_pinctrl_priv *priv = dev_get_priv(dev); |
| struct rockchip_pin_ctrl *ctrl = priv->ctrl; |
| u32 cells[MAX_ROCKCHIP_PINS_ENTRIES * 4]; |
| u32 bank, pin, mux, conf, arg, default_val; |
| int ret, count, i; |
| const char *prop_name; |
| const void *value; |
| int prop_len, param; |
| const u32 *data; |
| ofnode node; |
| struct ofprop prop; |
| data = dev_read_prop(config, "rockchip,pins", &count); |
| if (count < 0) { |
| debug("%s: bad array size %d\n", __func__, count); |
| return -EINVAL; |
| } |
| |
| count /= sizeof(u32); |
| if (count > MAX_ROCKCHIP_PINS_ENTRIES * 4) { |
| debug("%s: unsupported pins array count %d\n", |
| __func__, count); |
| return -EINVAL; |
| } |
| |
| for (i = 0; i < count; i++) |
| cells[i] = fdt32_to_cpu(data[i]); |
| |
| for (i = 0; i < (count >> 2); i++) { |
| bank = cells[4 * i + 0]; |
| pin = cells[4 * i + 1]; |
| mux = cells[4 * i + 2]; |
| conf = cells[4 * i + 3]; |
| |
| ret = rockchip_verify_config(dev, bank, pin); |
| if (ret) |
| return ret; |
| |
| ret = rockchip_set_mux(&ctrl->pin_banks[bank], pin, mux); |
| if (ret) |
| return ret; |
| |
| node = ofnode_get_by_phandle(conf); |
| if (!ofnode_valid(node)) |
| return -ENODEV; |
| ofnode_for_each_prop(prop, node) { |
| value = ofprop_get_property(&prop, &prop_name, &prop_len); |
| if (!value) |
| continue; |
| |
| param = rockchip_pinconf_prop_name_to_param(prop_name, |
| &default_val); |
| if (param < 0) |
| continue; |
| |
| if (prop_len >= sizeof(fdt32_t)) |
| arg = fdt32_to_cpu(*(fdt32_t *)value); |
| else |
| arg = default_val; |
| |
| ret = rockchip_pinconf_set(&ctrl->pin_banks[bank], pin, |
| param, arg); |
| if (ret) { |
| debug("%s: rockchip_pinconf_set fail: %d\n", |
| __func__, ret); |
| return ret; |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| const struct pinctrl_ops rockchip_pinctrl_ops = { |
| .set_state = rockchip_pinctrl_set_state, |
| .get_gpio_mux = rockchip_pinctrl_get_gpio_mux, |
| }; |
| |
| /* retrieve the soc specific data */ |
| static struct rockchip_pin_ctrl *rockchip_pinctrl_get_soc_data(struct udevice *dev) |
| { |
| struct rockchip_pinctrl_priv *priv = dev_get_priv(dev); |
| struct rockchip_pin_ctrl *ctrl = |
| (struct rockchip_pin_ctrl *)dev_get_driver_data(dev); |
| struct rockchip_pin_bank *bank; |
| int grf_offs, pmu_offs, drv_grf_offs, drv_pmu_offs, i, j; |
| |
| grf_offs = ctrl->grf_mux_offset; |
| pmu_offs = ctrl->pmu_mux_offset; |
| drv_pmu_offs = ctrl->pmu_drv_offset; |
| drv_grf_offs = ctrl->grf_drv_offset; |
| bank = ctrl->pin_banks; |
| |
| for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { |
| int bank_pins = 0; |
| |
| bank->priv = priv; |
| bank->pin_base = ctrl->nr_pins; |
| ctrl->nr_pins += bank->nr_pins; |
| |
| /* calculate iomux and drv offsets */ |
| for (j = 0; j < 4; j++) { |
| struct rockchip_iomux *iom = &bank->iomux[j]; |
| struct rockchip_drv *drv = &bank->drv[j]; |
| int inc; |
| |
| if (bank_pins >= bank->nr_pins) |
| break; |
| |
| /* preset iomux offset value, set new start value */ |
| if (iom->offset >= 0) { |
| if (iom->type & IOMUX_SOURCE_PMU) |
| pmu_offs = iom->offset; |
| else |
| grf_offs = iom->offset; |
| } else { /* set current iomux offset */ |
| iom->offset = (iom->type & IOMUX_SOURCE_PMU) ? |
| pmu_offs : grf_offs; |
| } |
| |
| /* preset drv offset value, set new start value */ |
| if (drv->offset >= 0) { |
| if (iom->type & IOMUX_SOURCE_PMU) |
| drv_pmu_offs = drv->offset; |
| else |
| drv_grf_offs = drv->offset; |
| } else { /* set current drv offset */ |
| drv->offset = (iom->type & IOMUX_SOURCE_PMU) ? |
| drv_pmu_offs : drv_grf_offs; |
| } |
| |
| debug("bank %d, iomux %d has iom_offset 0x%x drv_offset 0x%x\n", |
| i, j, iom->offset, drv->offset); |
| |
| /* |
| * Increase offset according to iomux width. |
| * 4bit iomux'es are spread over two registers. |
| */ |
| inc = (iom->type & (IOMUX_WIDTH_4BIT | |
| IOMUX_WIDTH_3BIT | |
| IOMUX_8WIDTH_2BIT)) ? 8 : 4; |
| if ((iom->type & IOMUX_SOURCE_PMU) || (iom->type & IOMUX_L_SOURCE_PMU)) |
| pmu_offs += inc; |
| else |
| grf_offs += inc; |
| |
| /* |
| * Increase offset according to drv width. |
| * 3bit drive-strenth'es are spread over two registers. |
| */ |
| if ((drv->drv_type == DRV_TYPE_IO_1V8_3V0_AUTO) || |
| (drv->drv_type == DRV_TYPE_IO_3V3_ONLY)) |
| inc = 8; |
| else |
| inc = 4; |
| |
| if (iom->type & IOMUX_SOURCE_PMU) |
| drv_pmu_offs += inc; |
| else |
| drv_grf_offs += inc; |
| |
| bank_pins += 8; |
| } |
| |
| /* calculate the per-bank recalced_mask */ |
| for (j = 0; j < ctrl->niomux_recalced; j++) { |
| int pin = 0; |
| |
| if (ctrl->iomux_recalced[j].num == bank->bank_num) { |
| pin = ctrl->iomux_recalced[j].pin; |
| bank->recalced_mask |= BIT(pin); |
| } |
| } |
| |
| /* calculate the per-bank route_mask */ |
| for (j = 0; j < ctrl->niomux_routes; j++) { |
| int pin = 0; |
| |
| if (ctrl->iomux_routes[j].bank_num == bank->bank_num) { |
| pin = ctrl->iomux_routes[j].pin; |
| bank->route_mask |= BIT(pin); |
| } |
| } |
| } |
| |
| return ctrl; |
| } |
| |
| int rockchip_pinctrl_probe(struct udevice *dev) |
| { |
| struct rockchip_pinctrl_priv *priv = dev_get_priv(dev); |
| struct rockchip_pin_ctrl *ctrl; |
| struct udevice *syscon; |
| struct regmap *regmap; |
| int ret = 0; |
| |
| /* get rockchip grf syscon phandle */ |
| ret = uclass_get_device_by_phandle(UCLASS_SYSCON, dev, "rockchip,grf", |
| &syscon); |
| if (ret) { |
| debug("unable to find rockchip,grf syscon device (%d)\n", ret); |
| return ret; |
| } |
| |
| /* get grf-reg base address */ |
| regmap = syscon_get_regmap(syscon); |
| if (!regmap) { |
| debug("unable to find rockchip grf regmap\n"); |
| return -ENODEV; |
| } |
| priv->regmap_base = regmap; |
| |
| /* option: get pmu-reg base address */ |
| ret = uclass_get_device_by_phandle(UCLASS_SYSCON, dev, "rockchip,pmu", |
| &syscon); |
| if (!ret) { |
| /* get pmugrf-reg base address */ |
| regmap = syscon_get_regmap(syscon); |
| if (!regmap) { |
| debug("unable to find rockchip pmu regmap\n"); |
| return -ENODEV; |
| } |
| priv->regmap_pmu = regmap; |
| } |
| |
| ctrl = rockchip_pinctrl_get_soc_data(dev); |
| if (!ctrl) { |
| debug("driver data not available\n"); |
| return -EINVAL; |
| } |
| |
| priv->ctrl = ctrl; |
| return 0; |
| } |