| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (C) 2023 PHYTEC Messtechnik GmbH |
| * Author: Teresa Remmet <t.remmet@phytec.de> |
| */ |
| |
| #include <dm/device.h> |
| #include <dm/uclass.h> |
| #include <i2c.h> |
| #include <u-boot/crc.h> |
| #include <malloc.h> |
| #include <extension_board.h> |
| |
| #include "phytec_som_detection.h" |
| |
| struct phytec_eeprom_data eeprom_data; |
| |
| #if IS_ENABLED(CONFIG_PHYTEC_SOM_DETECTION) |
| |
| int phytec_eeprom_data_setup_fallback(struct phytec_eeprom_data *data, |
| int bus_num, int addr, int addr_fallback) |
| { |
| int ret; |
| |
| ret = phytec_eeprom_data_init(data, bus_num, addr); |
| if (ret) { |
| pr_err("%s: init failed. Trying fall back address 0x%x\n", |
| __func__, addr_fallback); |
| ret = phytec_eeprom_data_init(data, bus_num, addr_fallback); |
| } |
| |
| if (ret) |
| pr_err("%s: EEPROM data init failed\n", __func__); |
| |
| return ret; |
| } |
| |
| int phytec_eeprom_data_setup(struct phytec_eeprom_data *data, |
| int bus_num, int addr) |
| { |
| int ret; |
| |
| ret = phytec_eeprom_data_init(data, bus_num, addr); |
| if (ret) |
| pr_err("%s: EEPROM data init failed\n", __func__); |
| |
| return ret; |
| } |
| |
| int phytec_eeprom_data_init(struct phytec_eeprom_data *data, |
| int bus_num, int addr) |
| { |
| int ret, i; |
| unsigned int crc; |
| u8 *ptr; |
| const unsigned int payload_size = sizeof(struct phytec_eeprom_payload); |
| |
| if (!data) |
| data = &eeprom_data; |
| |
| #if CONFIG_IS_ENABLED(DM_I2C) |
| struct udevice *dev; |
| |
| ret = i2c_get_chip_for_busnum(bus_num, addr, 2, &dev); |
| if (ret) { |
| pr_err("%s: i2c EEPROM not found: %i.\n", __func__, ret); |
| goto err; |
| } |
| |
| ret = dm_i2c_read(dev, 0, (uint8_t *)data, payload_size); |
| if (ret) { |
| pr_err("%s: Unable to read EEPROM data: %i\n", __func__, ret); |
| goto err; |
| } |
| #else |
| i2c_set_bus_num(bus_num); |
| ret = i2c_read(addr, 0, 2, (uint8_t *)data, |
| sizeof(struct phytec_eeprom_data)); |
| #endif |
| |
| if (data->payload.api_rev == 0xff) { |
| pr_err("%s: EEPROM is not flashed. Prototype?\n", __func__); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| ptr = (u8 *)data; |
| for (i = 0; i < payload_size; ++i) |
| if (ptr[i] != 0x0) |
| break; |
| |
| if (i == payload_size) { |
| pr_err("%s: EEPROM data is all zero. Erased?\n", __func__); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| /* We are done here for early revisions */ |
| if (data->payload.api_rev <= PHYTEC_API_REV1) { |
| data->valid = true; |
| return 0; |
| } |
| |
| crc = crc8(0, (const unsigned char *)&data->payload, payload_size); |
| debug("%s: crc: %x\n", __func__, crc); |
| |
| if (crc) { |
| pr_err("%s: CRC mismatch. EEPROM data is not usable.\n", |
| __func__); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| data->valid = true; |
| return 0; |
| err: |
| data->valid = false; |
| return ret; |
| } |
| |
| void __maybe_unused phytec_print_som_info(struct phytec_eeprom_data *data) |
| { |
| struct phytec_api2_data *api2; |
| char pcb_sub_rev; |
| unsigned int ksp_no, sub_som_type1, sub_som_type2; |
| |
| if (!data) |
| data = &eeprom_data; |
| |
| if (!data->valid || data->payload.api_rev < PHYTEC_API_REV2) |
| return; |
| |
| api2 = &data->payload.data.data_api2; |
| |
| /* Calculate PCB subrevision */ |
| pcb_sub_rev = api2->pcb_sub_opt_rev & 0x0f; |
| pcb_sub_rev = pcb_sub_rev ? ((pcb_sub_rev - 1) + 'a') : ' '; |
| |
| /* print standard product string */ |
| if (api2->som_type <= 1) { |
| printf("SoM: %s-%03u-%s.%s PCB rev: %u%c\n", |
| phytec_som_type_str[api2->som_type], api2->som_no, |
| api2->opt, api2->bom_rev, api2->pcb_rev, pcb_sub_rev); |
| return; |
| } |
| /* print KSP/KSM string */ |
| if (api2->som_type <= 3) { |
| ksp_no = (api2->ksp_no << 8) | api2->som_no; |
| printf("SoM: %s-%u ", |
| phytec_som_type_str[api2->som_type], ksp_no); |
| /* print standard product based KSP/KSM strings */ |
| } else { |
| switch (api2->som_type) { |
| case 4: |
| sub_som_type1 = 0; |
| sub_som_type2 = 3; |
| break; |
| case 5: |
| sub_som_type1 = 0; |
| sub_som_type2 = 2; |
| break; |
| case 6: |
| sub_som_type1 = 1; |
| sub_som_type2 = 3; |
| break; |
| case 7: |
| sub_som_type1 = 1; |
| sub_som_type2 = 2; |
| break; |
| default: |
| pr_err("%s: Invalid SoM type: %i", __func__, api2->som_type); |
| return; |
| }; |
| |
| printf("SoM: %s-%03u-%s-%03u ", |
| phytec_som_type_str[sub_som_type1], |
| api2->som_no, phytec_som_type_str[sub_som_type2], |
| api2->ksp_no); |
| } |
| |
| printf("Option: %s BOM rev: %s PCB rev: %u%c\n", api2->opt, |
| api2->bom_rev, api2->pcb_rev, pcb_sub_rev); |
| } |
| |
| char * __maybe_unused phytec_get_opt(struct phytec_eeprom_data *data) |
| { |
| char *opt; |
| |
| if (!data) |
| data = &eeprom_data; |
| |
| if (!data->valid) |
| return NULL; |
| |
| if (data->payload.api_rev < PHYTEC_API_REV2) |
| opt = data->payload.data.data_api0.opt; |
| else |
| opt = data->payload.data.data_api2.opt; |
| |
| return opt; |
| } |
| |
| u8 __maybe_unused phytec_get_rev(struct phytec_eeprom_data *data) |
| { |
| struct phytec_api2_data *api2; |
| |
| if (!data) |
| data = &eeprom_data; |
| |
| if (!data->valid || data->payload.api_rev < PHYTEC_API_REV2) |
| return PHYTEC_EEPROM_INVAL; |
| |
| api2 = &data->payload.data.data_api2; |
| |
| return api2->pcb_rev; |
| } |
| |
| u8 __maybe_unused phytec_get_som_type(struct phytec_eeprom_data *data) |
| { |
| if (!data) |
| data = &eeprom_data; |
| |
| if (!data->valid || data->payload.api_rev < PHYTEC_API_REV2) |
| return PHYTEC_EEPROM_INVAL; |
| |
| return data->payload.data.data_api2.som_type; |
| } |
| |
| #if IS_ENABLED(CONFIG_CMD_EXTENSION) |
| struct extension *phytec_add_extension(const char *name, const char *overlay, |
| const char *other) |
| { |
| struct extension *extension; |
| |
| if (strlen(overlay) > sizeof(extension->overlay)) { |
| pr_err("Overlay name %s is longer than %lu.\n", overlay, |
| sizeof(extension->overlay)); |
| return NULL; |
| } |
| |
| extension = calloc(1, sizeof(struct extension)); |
| snprintf(extension->name, sizeof(extension->name), name); |
| snprintf(extension->overlay, sizeof(extension->overlay), overlay); |
| snprintf(extension->other, sizeof(extension->other), other); |
| snprintf(extension->owner, sizeof(extension->owner), "PHYTEC"); |
| |
| return extension; |
| } |
| #endif /* IS_ENABLED(CONFIG_CMD_EXTENSION) */ |
| |
| #else |
| |
| inline int phytec_eeprom_data_setup(struct phytec_eeprom_data *data, |
| int bus_num, int addr) |
| { |
| return PHYTEC_EEPROM_INVAL; |
| } |
| |
| inline int phytec_eeprom_data_setup_fallback(struct phytec_eeprom_data *data, |
| int bus_num, int addr, |
| int addr_fallback) |
| { |
| return PHYTEC_EEPROM_INVAL; |
| } |
| |
| inline int phytec_eeprom_data_init(struct phytec_eeprom_data *data, |
| int bus_num, int addr) |
| { |
| return PHYTEC_EEPROM_INVAL; |
| } |
| |
| inline void __maybe_unused phytec_print_som_info(struct phytec_eeprom_data *data) |
| { |
| } |
| |
| inline char *__maybe_unused phytec_get_opt(struct phytec_eeprom_data *data) |
| { |
| return NULL; |
| } |
| |
| u8 __maybe_unused phytec_get_rev(struct phytec_eeprom_data *data) |
| { |
| return PHYTEC_EEPROM_INVAL; |
| } |
| |
| u8 __maybe_unused phytec_get_som_type(struct phytec_eeprom_data *data) |
| { |
| return PHYTEC_EEPROM_INVAL; |
| } |
| |
| #if IS_ENABLED(CONFIG_CMD_EXTENSION) |
| inline struct extension *phytec_add_extension(const char *name, |
| const char *overlay, |
| const char *other) |
| { |
| return NULL; |
| } |
| #endif /* IS_ENABLED(CONFIG_CMD_EXTENSION) */ |
| |
| #endif /* IS_ENABLED(CONFIG_PHYTEC_SOM_DETECTION) */ |