| CONFIG_PPC=y |
| CONFIG_SYS_TEXT_BASE=0x00200000 |
| CONFIG_SPL_LIBCOMMON_SUPPORT=y |
| CONFIG_SPL_LIBGENERIC_SUPPORT=y |
| CONFIG_ENV_SIZE=0x2000 |
| CONFIG_ENV_OFFSET=0x100000 |
| CONFIG_DEFAULT_DEVICE_TREE="t2080rdb" |
| CONFIG_SPL_TEXT_BASE=0xFFFD8000 |
| CONFIG_VID=y |
| CONFIG_VID_FLS_ENV="t208xrdb_vdd_mv" |
| CONFIG_VOL_MONITOR_IR36021_READ=y |
| CONFIG_VOL_MONITOR_IR36021_SET=y |
| CONFIG_SPL_SERIAL=y |
| CONFIG_SPL_DRIVERS_MISC=y |
| CONFIG_SPL=y |
| CONFIG_MPC85xx=y |
| CONFIG_TARGET_T2080RDB=y |
| CONFIG_ENABLE_36BIT_PHYS=y |
| CONFIG_SYS_BOOK3E_HV=y |
| CONFIG_SYS_FSL_CPC=y |
| CONFIG_SYS_MPC85XX_NO_RESETVEC=y |
| CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y |
| CONFIG_T2080RDB_REV_D=y |
| <<<<<<< HEAD |
| ======= |
| CONFIG_PCIE1=y |
| CONFIG_PCIE2=y |
| CONFIG_PCIE3=y |
| CONFIG_PCIE4=y |
| CONFIG_VID=y |
| CONFIG_VID_FLS_ENV="t208xrdb_vdd_mv" |
| CONFIG_VOL_MONITOR_IR36021_READ=y |
| CONFIG_VOL_MONITOR_IR36021_SET=y |
| >>>>>>> Convert CONFIG_PCIE1 et al to Kconfig |
| CONFIG_SYS_MEMTEST_START=0x00200000 |
| CONFIG_SYS_MEMTEST_END=0x00400000 |
| CONFIG_MP=y |
| CONFIG_FIT=y |
| CONFIG_FIT_VERBOSE=y |
| CONFIG_OF_BOARD_SETUP=y |
| CONFIG_OF_STDOUT_VIA_ALIAS=y |
| CONFIG_RAMBOOT_PBL=y |
| CONFIG_SYS_FSL_PBL_PBI="board/freescale/t208xrdb/t2080_pbi.cfg" |
| CONFIG_SYS_FSL_PBL_RCW="board/freescale/t208xrdb/t2080_nand_rcw.cfg" |
| CONFIG_BOOTDELAY=10 |
| CONFIG_USE_BOOTCOMMAND=y |
| CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" |
| CONFIG_ARCH_MISC_INIT=y |
| CONFIG_BOARD_EARLY_INIT_R=y |
| # CONFIG_SPL_FRAMEWORK is not set |
| CONFIG_SPL_MAX_SIZE=0x28000 |
| CONFIG_SPL_PAD_TO=0x40000 |
| CONFIG_SPL_NAND_BOOT=y |
| CONFIG_SPL_FSL_PBL=y |
| CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y |
| CONFIG_SPL_FLUSH_IMAGE=y |
| CONFIG_SPL_SKIP_RELOCATE=y |
| CONFIG_SPL_GD_ADDR=0xfffc8000 |
| CONFIG_SPL_RELOC_STACK=0xfffd8000 |
| CONFIG_SPL_RELOC_MALLOC=y |
| CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000 |
| CONFIG_SPL_RELOC_MALLOC_SIZE=0xc800 |
| CONFIG_SPL_ENV_SUPPORT=y |
| CONFIG_SPL_I2C=y |
| CONFIG_SPL_MPC8XXX_INIT_DDR=y |
| CONFIG_SPL_NAND_SUPPORT=y |
| CONFIG_HUSH_PARSER=y |
| CONFIG_SYS_PBSIZE=276 |
| CONFIG_CMD_IMLS=y |
| CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 |
| CONFIG_CMD_MEMTEST=y |
| CONFIG_SYS_ALT_MEMTEST=y |
| CONFIG_CMD_DM=y |
| CONFIG_CMD_I2C=y |
| CONFIG_CMD_MMC=y |
| CONFIG_CMD_USB=y |
| CONFIG_CMD_DHCP=y |
| CONFIG_CMD_MII=y |
| CONFIG_CMD_PING=y |
| CONFIG_CMD_EXT2=y |
| CONFIG_CMD_FAT=y |
| CONFIG_CMD_MTDPARTS=y |
| CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.1" |
| CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.1:1m(uboot),5m(kernel),128k(dtb),-(user)" |
| # CONFIG_CMD_IRQ is not set |
| CONFIG_OF_CONTROL=y |
| CONFIG_ENV_OVERWRITE=y |
| CONFIG_ENV_IS_IN_NAND=y |
| CONFIG_USE_BOOTFILE=y |
| CONFIG_BOOTFILE="uImage" |
| CONFIG_USE_ETHPRIME=y |
| CONFIG_ETHPRIME="FM1@DTSEC3" |
| CONFIG_DM=y |
| CONFIG_FSL_SATA_V2=y |
| CONFIG_SYS_SATA_MAX_DEVICE=2 |
| CONFIG_FSL_CAAM=y |
| CONFIG_DDR_CLK_FREQ=133330000 |
| CONFIG_DDR_ECC=y |
| CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y |
| CONFIG_DM_I2C=y |
| CONFIG_SPL_SYS_I2C_LEGACY=y |
| CONFIG_I2C_SET_DEFAULT_BUS_NUM=y |
| CONFIG_SYS_I2C_FSL=y |
| CONFIG_SYS_FSL_I2C_OFFSET=0x118000 |
| CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y |
| CONFIG_SYS_FSL_I2C2_OFFSET=0x118100 |
| CONFIG_SYS_FSL_HAS_I2C3_OFFSET=y |
| CONFIG_SYS_FSL_I2C3_OFFSET=0x119000 |
| CONFIG_SYS_FSL_HAS_I2C4_OFFSET=y |
| CONFIG_SYS_FSL_I2C4_OFFSET=0x119100 |
| CONFIG_SYS_I2C_EEPROM_ADDR=0x50 |
| CONFIG_FSL_ESDHC=y |
| CONFIG_MTD=y |
| CONFIG_MTD_NOR_FLASH=y |
| CONFIG_FLASH_CFI_DRIVER=y |
| CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y |
| CONFIG_FLASH_CFI_MTD=y |
| CONFIG_SYS_FLASH_CFI=y |
| CONFIG_MTD_RAW_NAND=y |
| CONFIG_NAND_FSL_IFC=y |
| CONFIG_SYS_NAND_ONFI_DETECTION=y |
| CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y |
| CONFIG_SYS_NAND_U_BOOT_OFFS=0x40000 |
| CONFIG_DM_SPI_FLASH=y |
| CONFIG_SF_DEFAULT_SPEED=10000000 |
| CONFIG_SPI_FLASH_STMICRO=y |
| CONFIG_PHYLIB=y |
| CONFIG_PHY_AQUANTIA=y |
| CONFIG_PHY_CORTINA=y |
| CONFIG_SYS_CORTINA_FW_IN_NAND=y |
| CONFIG_CORTINA_FW_ADDR=0x200000 |
| CONFIG_PHY_REALTEK=y |
| CONFIG_DM_ETH=y |
| CONFIG_DM_MDIO=y |
| CONFIG_E1000=y |
| CONFIG_FMAN_ENET=y |
| CONFIG_SYS_FMAN_FW_ADDR=0x180000 |
| CONFIG_MII=y |
| CONFIG_DM_PCI_COMPAT=y |
| CONFIG_PCIE_FSL=y |
| CONFIG_SYS_QE_FMAN_FW_IN_NAND=y |
| CONFIG_DM_RTC=y |
| CONFIG_RTC_DS1307=y |
| CONFIG_SYS_NS16550=y |
| CONFIG_SPI=y |
| CONFIG_DM_SPI=y |
| CONFIG_FSL_ESPI=y |
| CONFIG_USB=y |
| CONFIG_USB_EHCI_FSL=y |
| CONFIG_USB_MAX_CONTROLLER_COUNT=2 |
| CONFIG_USB_STORAGE=y |
| CONFIG_ADDR_MAP=y |
| CONFIG_SYS_NUM_ADDR_MAP=64 |