include/configs/atngw100.h - filogic/uboot - Gitiles

 /*
  * Copyright (C) 2006 Atmel Corporation
  *
  * Configuration settings for the AVR32 Network Gateway
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */
 #ifndef __CONFIG_H
 #define __CONFIG_H

 #include <asm/arch/hardware.h>

 #define CONFIG_AVR32			1
 #define CONFIG_AT32AP			1
 #define CONFIG_AT32AP7000		1
 #define CONFIG_ATNGW100			1

 #define CONFIG_SYS_HZ				1000

 /*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
  * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
  * and the PBA bus to run at 1/4 the PLL frequency.
  */
 #define CONFIG_PLL			1
 #define CONFIG_SYS_POWER_MANAGER		1
 #define CONFIG_SYS_OSC0_HZ			20000000
 #define CONFIG_SYS_PLL0_DIV			1
 #define CONFIG_SYS_PLL0_MUL			7
 #define CONFIG_SYS_PLL0_SUPPRESS_CYCLES	16
 #define CONFIG_SYS_CLKDIV_CPU			0
 #define CONFIG_SYS_CLKDIV_HSB			1
 #define CONFIG_SYS_CLKDIV_PBA			2
 #define CONFIG_SYS_CLKDIV_PBB			1

 /* Reserve VM regions for SDRAM and NOR flash */
 #define CONFIG_SYS_NR_VM_REGIONS		2

 /*
  * The PLLOPT register controls the PLL like this:
  *   icp = PLLOPT<2>
  *   ivco = PLLOPT<1:0>
  *
  * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
  */
 #define CONFIG_SYS_PLL0_OPT			0x04

 #define CONFIG_USART1			1

 /* User serviceable stuff */
 #define CONFIG_DOS_PARTITION		1

 #define CONFIG_CMDLINE_TAG		1
 #define CONFIG_SETUP_MEMORY_TAGS	1
 #define CONFIG_INITRD_TAG		1

 #define CONFIG_STACKSIZE		(2048)

 #define CONFIG_BAUDRATE			115200
 #define CONFIG_BOOTARGS							\
 	"console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2"
 #define CONFIG_BOOTCOMMAND						\
 	"fsload; bootm"

 /*
  * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
  * data on the serial line may interrupt the boot sequence.
  */
 #define CONFIG_BOOTDELAY		1
 #define CONFIG_AUTOBOOT			1
 #define CONFIG_AUTOBOOT_KEYED		1
 #define CONFIG_AUTOBOOT_PROMPT		\
 	"Press SPACE to abort autoboot in %d seconds\n", bootdelay
 #define CONFIG_AUTOBOOT_DELAY_STR	"d"
 #define CONFIG_AUTOBOOT_STOP_STR	" "

 /*
  * After booting the board for the first time, new ethernet addresses
  * should be generated and assigned to the environment variables
  * "ethaddr" and "eth1addr". This is normally done during production.
  */
 #define CONFIG_OVERWRITE_ETHADDR_ONCE	1
 #define CONFIG_NET_MULTI		1

 /*
  * BOOTP/DHCP options
  */
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_BOOTP_GATEWAY

 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_MMC
 #define CONFIG_CMD_SF
 #define CONFIG_CMD_SPI

 #undef CONFIG_CMD_FPGA
 #undef CONFIG_CMD_SETGETDCR
 #undef CONFIG_CMD_SOURCE
 #undef CONFIG_CMD_XIMG

 #define CONFIG_ATMEL_USART		1
 #define CONFIG_MACB			1
 #define CONFIG_PORTMUX_PIO		1
 #define CONFIG_SYS_NR_PIOS			5
 #define CONFIG_SYS_HSDRAMC			1
 #define CONFIG_MMC			1
 #define CONFIG_ATMEL_MCI		1
 #define CONFIG_ATMEL_SPI		1

 #define CONFIG_SPI_FLASH		1
 #define CONFIG_SPI_FLASH_ATMEL		1

 #define CONFIG_SYS_DCACHE_LINESZ		32
 #define CONFIG_SYS_ICACHE_LINESZ		32

 #define CONFIG_NR_DRAM_BANKS		1

 #define CONFIG_SYS_FLASH_CFI			1
 #define CONFIG_FLASH_CFI_DRIVER		1

 #define CONFIG_SYS_FLASH_BASE			0x00000000
 #define CONFIG_SYS_FLASH_SIZE			0x800000
 #define CONFIG_SYS_MAX_FLASH_BANKS		1
 #define CONFIG_SYS_MAX_FLASH_SECT		135

 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE

 #define CONFIG_SYS_INTRAM_BASE			INTERNAL_SRAM_BASE
 #define CONFIG_SYS_INTRAM_SIZE			INTERNAL_SRAM_SIZE
 #define CONFIG_SYS_SDRAM_BASE			EBI_SDRAM_BASE

 #define CONFIG_ENV_IS_IN_FLASH		1
 #define CONFIG_ENV_SIZE			65536
 #define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE)

 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)

 #define CONFIG_SYS_MALLOC_LEN			(256*1024)
 #define CONFIG_SYS_DMA_ALLOC_LEN		(16384)

 /* Allow 4MB for the kernel run-time image */
 #define CONFIG_SYS_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00400000)
 #define CONFIG_SYS_BOOTPARAMS_LEN		(16 * 1024)

 /* Other configuration settings that shouldn't have to change all that often */
 #define CONFIG_SYS_PROMPT			"U-Boot> "
 #define CONFIG_SYS_CBSIZE			256
 #define CONFIG_SYS_MAXARGS			16
 #define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_LONGHELP			1

 #define CONFIG_SYS_MEMTEST_START		EBI_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_END			(CONFIG_SYS_MEMTEST_START + 0x1f00000)

 #define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }

 #endif /* __CONFIG_H */
	/*
	* Copyright (C) 2006 Atmel Corporation
	*
	* Configuration settings for the AVR32 Network Gateway
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/
	#ifndef __CONFIG_H
	#define __CONFIG_H

	#include <asm/arch/hardware.h>

	#define CONFIG_AVR32 1
	#define CONFIG_AT32AP 1
	#define CONFIG_AT32AP7000 1
	#define CONFIG_ATNGW100 1

	#define CONFIG_SYS_HZ 1000

	/*
	* Set up the PLL to run at 140 MHz, the CPU to run at the PLL
	* frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
	* and the PBA bus to run at 1/4 the PLL frequency.
	*/
	#define CONFIG_PLL 1
	#define CONFIG_SYS_POWER_MANAGER 1
	#define CONFIG_SYS_OSC0_HZ 20000000
	#define CONFIG_SYS_PLL0_DIV 1
	#define CONFIG_SYS_PLL0_MUL 7
	#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES 16
	#define CONFIG_SYS_CLKDIV_CPU 0
	#define CONFIG_SYS_CLKDIV_HSB 1
	#define CONFIG_SYS_CLKDIV_PBA 2
	#define CONFIG_SYS_CLKDIV_PBB 1

	/* Reserve VM regions for SDRAM and NOR flash */
	#define CONFIG_SYS_NR_VM_REGIONS 2

	/*
	* The PLLOPT register controls the PLL like this:
	* icp = PLLOPT<2>
	* ivco = PLLOPT<1:0>
	*
	* We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
	*/
	#define CONFIG_SYS_PLL0_OPT 0x04

	#define CONFIG_USART1 1

	/* User serviceable stuff */
	#define CONFIG_DOS_PARTITION 1

	#define CONFIG_CMDLINE_TAG 1
	#define CONFIG_SETUP_MEMORY_TAGS 1
	#define CONFIG_INITRD_TAG 1

	#define CONFIG_STACKSIZE (2048)

	#define CONFIG_BAUDRATE 115200
	#define CONFIG_BOOTARGS \
	"console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2"
	#define CONFIG_BOOTCOMMAND \
	"fsload; bootm"

	/*
	* Only interrupt autoboot if <space> is pressed. Otherwise, garbage
	* data on the serial line may interrupt the boot sequence.
	*/
	#define CONFIG_BOOTDELAY 1
	#define CONFIG_AUTOBOOT 1
	#define CONFIG_AUTOBOOT_KEYED 1
	#define CONFIG_AUTOBOOT_PROMPT \
	"Press SPACE to abort autoboot in %d seconds\n", bootdelay
	#define CONFIG_AUTOBOOT_DELAY_STR "d"
	#define CONFIG_AUTOBOOT_STOP_STR " "

	/*
	* After booting the board for the first time, new ethernet addresses
	* should be generated and assigned to the environment variables
	* "ethaddr" and "eth1addr". This is normally done during production.
	*/
	#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
	#define CONFIG_NET_MULTI 1

	/*
	* BOOTP/DHCP options
	*/
	#define CONFIG_BOOTP_SUBNETMASK
	#define CONFIG_BOOTP_GATEWAY

	/*
	* Command line configuration.
	*/
	#include <config_cmd_default.h>

	#define CONFIG_CMD_ASKENV
	#define CONFIG_CMD_DHCP
	#define CONFIG_CMD_EXT2
	#define CONFIG_CMD_FAT
	#define CONFIG_CMD_JFFS2
	#define CONFIG_CMD_MMC
	#define CONFIG_CMD_SF
	#define CONFIG_CMD_SPI

	#undef CONFIG_CMD_FPGA
	#undef CONFIG_CMD_SETGETDCR
	#undef CONFIG_CMD_SOURCE
	#undef CONFIG_CMD_XIMG

	#define CONFIG_ATMEL_USART 1
	#define CONFIG_MACB 1
	#define CONFIG_PORTMUX_PIO 1
	#define CONFIG_SYS_NR_PIOS 5
	#define CONFIG_SYS_HSDRAMC 1
	#define CONFIG_MMC 1
	#define CONFIG_ATMEL_MCI 1
	#define CONFIG_ATMEL_SPI 1

	#define CONFIG_SPI_FLASH 1
	#define CONFIG_SPI_FLASH_ATMEL 1

	#define CONFIG_SYS_DCACHE_LINESZ 32
	#define CONFIG_SYS_ICACHE_LINESZ 32

	#define CONFIG_NR_DRAM_BANKS 1

	#define CONFIG_SYS_FLASH_CFI 1
	#define CONFIG_FLASH_CFI_DRIVER 1

	#define CONFIG_SYS_FLASH_BASE 0x00000000
	#define CONFIG_SYS_FLASH_SIZE 0x800000
	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	#define CONFIG_SYS_MAX_FLASH_SECT 135

	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE

	#define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE
	#define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE
	#define CONFIG_SYS_SDRAM_BASE EBI_SDRAM_BASE

	#define CONFIG_ENV_IS_IN_FLASH 1
	#define CONFIG_ENV_SIZE 65536
	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE)

	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)

	#define CONFIG_SYS_MALLOC_LEN (256*1024)
	#define CONFIG_SYS_DMA_ALLOC_LEN (16384)

	/* Allow 4MB for the kernel run-time image */
	#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
	#define CONFIG_SYS_BOOTPARAMS_LEN (16 * 1024)

	/* Other configuration settings that shouldn't have to change all that often */
	#define CONFIG_SYS_PROMPT "U-Boot> "
	#define CONFIG_SYS_CBSIZE 256
	#define CONFIG_SYS_MAXARGS 16
	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	#define CONFIG_SYS_LONGHELP 1

	#define CONFIG_SYS_MEMTEST_START EBI_SDRAM_BASE
	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x1f00000)

	#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }

	#endif /* __CONFIG_H */