include/configs/MVBLM7.h - filogic/uboot - Gitiles

 /*
  * Copyright (C) Matrix Vision GmbH 2008
  *
  * Matrix Vision mvBlueLYNX-M7 configuration file
  * based on Freescale's MPC8349ITX.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */


 #ifndef __CONFIG_H
 #define __CONFIG_H

 #include <version.h>

 /*
  * High Level Configuration Options
  */
 #define CONFIG_E300	1
 #define CONFIG_MPC83XX	1
 #define CONFIG_MPC834X	1
 #define CONFIG_MPC8343	1

 #define CONFIG_SYS_IMMR		0xE0000000

 #define CONFIG_PCI
 #define CONFIG_83XX_GENERIC_PCI
 #define CONFIG_PCI_SKIP_HOST_BRIDGE
 #define CONFIG_HARD_I2C
 #define CONFIG_TSEC_ENET
 #define CONFIG_MPC8XXX_SPI
 #define CONFIG_HARD_SPI
 #define MVBLM7_MMC_CS   0x04000000

 /* I2C */
 #undef CONFIG_SOFT_I2C

 #define CONFIG_FSL_I2C
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SYS_I2C_OFFSET		0x3000
 #define CONFIG_SYS_I2C2_OFFSET		0x3100

 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_I2C_SLAVE		0x7F

 /*
  * DDR Setup
  */
 #define CONFIG_SYS_DDR_BASE		0x00000000
 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
 #define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE
 #define CONFIG_SYS_83XX_DDR_USES_CS0	1
 #define CONFIG_SYS_MEMTEST_START	(60<<20)
 #define CONFIG_SYS_MEMTEST_END		(70<<20)

 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL	(DDR_SDRAM_CLK_CNTL_SS_EN | \
 				DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05

 #define CONFIG_SYS_DDR_SIZE		256

 /* HC, 75Ohm, DDR-II, DRQ */
 #define CONFIG_SYS_DDRCDR		0x80000001
 /* EN, ODT_WR, 3BA, 14row, 10col */
 #define CONFIG_SYS_DDR_CS0_CONFIG	0x80014102
 #define CONFIG_SYS_DDR_CS1_CONFIG	0x0
 #define CONFIG_SYS_DDR_CS2_CONFIG	0x0
 #define CONFIG_SYS_DDR_CS3_CONFIG	0x0

 #define CONFIG_SYS_DDR_CS0_BNDS	0x0000000f
 #define CONFIG_SYS_DDR_CS1_BNDS	0x0
 #define CONFIG_SYS_DDR_CS2_BNDS	0x0
 #define CONFIG_SYS_DDR_CS3_BNDS	0x0

 #define CONFIG_SYS_DDR_CLK_CNTL	0x02000000

 #define CONFIG_SYS_DDR_TIMING_0	0x00260802
 #define CONFIG_SYS_DDR_TIMING_1	0x2625b221
 #define CONFIG_SYS_DDR_TIMING_2	0x1f9820c7
 #define CONFIG_SYS_DDR_TIMING_3	0x00000000

 /* ~MEM_EN, SREN, DDR-II, 32_BE */
 #define CONFIG_SYS_DDR_SDRAM_CFG	0x43080000
 #define CONFIG_SYS_DDR_SDRAM_CFG2	0x00401000
 #define CONFIG_SYS_DDR_INTERVAL	0x04060100

 #define CONFIG_SYS_DDR_MODE		0x078e0232

 /* Flash */
 #define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT

 #define CONFIG_SYS_FLASH_BASE		0xFF800000
 #define CONFIG_SYS_FLASH_SIZE		8
 #define CONFIG_SYS_FLASH_SIZE_SHIFT	3
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500
 #define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define CONFIG_SYS_MAX_FLASH_SECT	256

 #define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | BR_PS_16 | BR_V)
 #define CONFIG_SYS_OR0_PRELIM		((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) | OR_UPM_XAM |  \
 				OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS|\
 				OR_GPCM_SCY_15 | OR_GPCM_TRLX | OR_GPCM_EHTR | \
 				OR_GPCM_EAD)
 #define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_LBLAWAR0_PRELIM	(LBLAWAR_EN | (0x13 + CONFIG_SYS_FLASH_SIZE_SHIFT))

 /*
  * U-Boot memory configuration
  */
 #define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
 #undef	CONFIG_SYS_RAMBOOT

 #define CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR	0xFD000000	/* Initial RAM address */
 #define CONFIG_SYS_INIT_RAM_END	0x1000		/* End of used area in RAM*/

 #define CONFIG_SYS_GBL_DATA_SIZE	0x100		/* num bytes initial data */
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
 #define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
 #define CONFIG_SYS_MALLOC_LEN		(512 * 1024)

 /*
  * Local Bus LCRR and LBCR regs
  *  LCRR:  DLL bypass, Clock divider is 4
  * External Local Bus rate is
  *  CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
  */
 #define CONFIG_SYS_LCRR	(LCRR_DBYP | LCRR_CLKDIV_4)
 #define CONFIG_SYS_LBC_LBCR	0x00000000

 /* LB sdram refresh timer, about 6us */
 #define CONFIG_SYS_LBC_LSRT	0x32000000
 /* LB refresh timer prescal, 266MHz/32*/
 #define CONFIG_SYS_LBC_MRTPR	0x20000000

 /*
  * Serial Port
  */
 #define CONFIG_CONS_INDEX	1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)

 #define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}

 #define CONFIG_CONSOLE		ttyS0
 #define CONFIG_BAUDRATE		115200

 #define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR + 0x4500)
 #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR + 0x4600)

 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT		1
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 #define MV_DTB_NAME	"mvblm7.dtb"

 /*
  * PCI
  */
 #define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
 #define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
 #define CONFIG_SYS_PCI1_MEM_SIZE	0x10000000
 #define CONFIG_SYS_PCI1_MMIO_BASE	(CONFIG_SYS_PCI1_MEM_BASE + CONFIG_SYS_PCI1_MEM_SIZE)
 #define CONFIG_SYS_PCI1_MMIO_PHYS	CONFIG_SYS_PCI1_MMIO_BASE
 #define CONFIG_SYS_PCI1_MMIO_SIZE	0x10000000
 #define CONFIG_SYS_PCI1_IO_BASE	0x00000000
 #define CONFIG_SYS_PCI1_IO_PHYS	0xE2000000
 #define CONFIG_SYS_PCI1_IO_SIZE	0x01000000

 #define _IO_BASE		0x00000000

 #define CONFIG_NET_MULTI	1
 #define CONFIG_NET_RETRY_COUNT	3

 #define PCI_66M
 #define CONFIG_83XX_CLKIN	66666667
 #define CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW

 /* TSEC */
 #define CONFIG_GMII
 #define CONFIG_SYS_VSC8601_SKEWFIX
 #define	CONFIG_SYS_VSC8601_SKEW_TX	3
 #define	CONFIG_SYS_VSC8601_SKEW_RX	3

 #define CONFIG_TSEC1
 #define CONFIG_TSEC2

 #define CONFIG_HAS_ETH0
 #define CONFIG_TSEC1_NAME	"TSEC0"
 #define CONFIG_FEC1_PHY_NORXERR
 #define CONFIG_SYS_TSEC1_OFFSET	0x24000
 #define CONFIG_SYS_TSEC1		(CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
 #define TSEC1_PHY_ADDR		0x10
 #define TSEC1_PHYIDX		0
 #define TSEC1_FLAGS		(TSEC_GIGABIT|TSEC_REDUCED)

 #define CONFIG_HAS_ETH1
 #define CONFIG_TSEC2_NAME  	"TSEC1"
 #define CONFIG_FEC2_PHY_NORXERR
 #define CONFIG_SYS_TSEC2_OFFSET	0x25000
 #define CONFIG_SYS_TSEC2 		(CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
 #define TSEC2_PHY_ADDR		0x11
 #define TSEC2_PHYIDX		0
 #define TSEC2_FLAGS		(TSEC_GIGABIT|TSEC_REDUCED)

 #define CONFIG_ETHPRIME		"TSEC0"

 #define CONFIG_BOOTP_VENDOREX
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_DNS
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_HOSTNAME
 #define CONFIG_BOOTP_BOOTFILESIZE
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_NTPSERVER
 #define CONFIG_BOOTP_RANDOM_DELAY
 #define CONFIG_BOOTP_SEND_HOSTNAME

 /* USB */
 #define CONFIG_HAS_FSL_DR_USB

 /*
  * Environment
  */
 #undef  CONFIG_SYS_FLASH_PROTECTION
 #define CONFIG_ENV_OVERWRITE

 #define CONFIG_ENV_IS_IN_FLASH	1
 #define CONFIG_ENV_ADDR		0xFF800000
 #define CONFIG_ENV_SIZE		0x2000
 #define CONFIG_ENV_SECT_SIZE	0x2000
 #define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR+CONFIG_ENV_SIZE)
 #define CONFIG_ENV_SIZE_REDUND 	CONFIG_ENV_SIZE

 #define CONFIG_LOADS_ECHO
 #define CONFIG_SYS_LOADS_BAUD_CHANGE

 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_SDRAM
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_FPGA

 #undef CONFIG_WATCHDOG

 /*
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "

 /* default load address */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR	0x200000

 #define CONFIG_SYS_PROMPT	"mvBL-M7> "
 #define CONFIG_SYS_CBSIZE	256

 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_MAXARGS	16
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 #define CONFIG_SYS_HZ		1000

 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/

 #define CONFIG_SYS_HRCW_LOW	0x0
 #define CONFIG_SYS_HRCW_HIGH	0x0

 /*
  * System performance
  */
 #define CONFIG_SYS_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
 #define CONFIG_SYS_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */
 #define CONFIG_SYS_SPCR_TSEC1EP	3	/* TSEC1 emergency priority (0-3) */
 #define CONFIG_SYS_SPCR_TSEC2EP	3	/* TSEC2 emergency priority (0-3) */

 /* clocking */
 #define CONFIG_SYS_SCCR_ENCCM		0
 #define CONFIG_SYS_SCCR_USBMPHCM	0
 #define	CONFIG_SYS_SCCR_USBDRCM	2
 #define CONFIG_SYS_SCCR_TSEC1CM	1
 #define CONFIG_SYS_SCCR_TSEC2CM	1

 #define CONFIG_SYS_SICRH	0x1fff8003
 #define CONFIG_SYS_SICRL	(SICRL_LDP_A | SICRL_USB1 | SICRL_USB0)

 #define CONFIG_SYS_HID0_INIT	0x000000000
 #define CONFIG_SYS_HID0_FINAL	CONFIG_SYS_HID0_INIT

 #define CONFIG_SYS_HID2	HID2_HBE
 #define CONFIG_HIGH_BATS	1

 /* DDR  */
 #define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 #define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)

 /* PCI  */
 #define CONFIG_SYS_IBAT1L	(CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 #define CONFIG_SYS_IBAT1U	(CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 #define CONFIG_SYS_IBAT2L	(CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT |\
 				BATL_GUARDEDSTORAGE)
 #define CONFIG_SYS_IBAT2U	(CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)

 /* no PCI2 */
 #define CONFIG_SYS_IBAT3L	0
 #define CONFIG_SYS_IBAT3U	0
 #define CONFIG_SYS_IBAT4L	0
 #define CONFIG_SYS_IBAT4U	0

 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
 #define CONFIG_SYS_IBAT5L	(CONFIG_SYS_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | \
 				BATL_GUARDEDSTORAGE)
 #define CONFIG_SYS_IBAT5U	(CONFIG_SYS_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)

 /* stack in DCACHE 0xFDF00000 & FLASH @ 0xFF800000 */
 #define CONFIG_SYS_IBAT6L	(0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE | \
 				 BATL_GUARDEDSTORAGE)
 #define CONFIG_SYS_IBAT6U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 #define CONFIG_SYS_IBAT7L	0
 #define CONFIG_SYS_IBAT7U	0

 #define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
 #define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
 #define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
 #define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
 #define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
 #define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
 #define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
 #define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
 #define CONFIG_SYS_DBAT4L	CONFIG_SYS_IBAT4L
 #define CONFIG_SYS_DBAT4U	CONFIG_SYS_IBAT4U
 #define CONFIG_SYS_DBAT5L	CONFIG_SYS_IBAT5L
 #define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
 #define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
 #define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
 #define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
 #define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U

 /*
  * Internal Definitions
  *
  * Boot Flags
  */
 #define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM	0x02	/* Software reboot */


 /*
  * Environment Configuration
  */
 #define CONFIG_ENV_OVERWRITE

 #define CONFIG_NETDEV		eth0

 /* Default path and filenames */
 #define CONFIG_BOOTDELAY		5
 #define CONFIG_AUTOBOOT_KEYED
 #define CONFIG_AUTOBOOT_STOP_STR	"s"
 #define CONFIG_ZERO_BOOTDELAY_CHECK
 #define CONFIG_RESET_TO_RETRY		1000

 #define MV_CI			mvBL-M7
 #define MV_VCI			mvBL-M7
 #define MV_FPGA_DATA		0xfff80000
 #define MV_FPGA_SIZE		0x00076ca2
 #define MV_KERNEL_ADDR		0xff810000
 #define MV_INITRD_ADDR		0xffb00000
 #define MV_SOURCE_ADDR		0xff804000
 #define MV_SOURCE_ADDR2		0xff806000
 #define MV_DTB_ADDR		0xff808000
 #define MV_INITRD_LENGTH	0x00400000

 #define CONFIG_SHOW_BOOT_PROGRESS 1

 #define MV_KERNEL_ADDR_RAM	0x00100000
 #define MV_DTB_ADDR_RAM		0x00600000
 #define MV_INITRD_ADDR_RAM	0x01000000

 #define CONFIG_BOOTCOMMAND	"if imi ${autoscr_addr}; \
 					then source ${autoscr_addr};  \
 					else source ${autoscr_addr2}; \
 				fi;"
 #define CONFIG_BOOTARGS		"root=/dev/ram ro rootfstype=squashfs"

 #define CONFIG_EXTRA_ENV_SETTINGS				\
 	"console_nr=0\0"					\
 	"baudrate=" MK_STR(CONFIG_BAUDRATE) "\0" 		\
 	"stdin=serial\0"					\
 	"stdout=serial\0"					\
 	"stderr=serial\0"					\
 	"fpga=0\0"						\
 	"fpgadata=" MK_STR(MV_FPGA_DATA) "\0"			\
 	"fpgadatasize=" MK_STR(MV_FPGA_SIZE) "\0"		\
 	"autoscr_addr=" MK_STR(MV_SOURCE_ADDR) "\0"		\
 	"autoscr_addr2=" MK_STR(MV_SOURCE_ADDR2) "\0"		\
 	"mv_kernel_addr=" MK_STR(MV_KERNEL_ADDR) "\0"		\
 	"mv_kernel_addr_ram=" MK_STR(MV_KERNEL_ADDR_RAM) "\0"	\
 	"mv_initrd_addr=" MK_STR(MV_INITRD_ADDR) "\0"		\
 	"mv_initrd_addr_ram=" MK_STR(MV_INITRD_ADDR_RAM) "\0"	\
 	"mv_initrd_length=" MK_STR(MV_INITRD_LENGTH) "\0"	\
 	"mv_dtb_addr=" MK_STR(MV_DTB_ADDR) "\0"			\
 	"mv_dtb_addr_ram=" MK_STR(MV_DTB_ADDR_RAM) "\0"		\
 	"dtb_name=" MK_STR(MV_DTB_NAME) "\0"			\
 	"mv_version=" U_BOOT_VERSION "\0"			\
 	"dhcp_client_id=" MK_STR(MV_CI) "\0"			\
 	"dhcp_vendor-class-identifier=" MK_STR(MV_VCI) "\0"	\
 	"netretry=no\0"						\
 	"use_static_ipaddr=no\0"				\
 	"static_ipaddr=192.168.90.10\0"				\
 	"static_netmask=255.255.255.0\0"			\
 	"static_gateway=0.0.0.0\0"				\
 	"initrd_name=uInitrd.mvblm7-xenorfs\0"			\
 	"zcip=no\0"						\
 	"netboot=yes\0"						\
 	"mvtest=Ff\0"						\
 	"tried_bootfromflash=no\0"				\
 	"tried_bootfromnet=no\0"				\
 	"bootfile=mvblm72625.boot\0"				\
 	"use_dhcp=yes\0"					\
 	"gev_start=yes\0"					\
 	"mvbcdma_debug=0\0"					\
 	"mvbcia_debug=0\0"					\
 	"propdev_debug=0\0"					\
 	"gevss_debug=0\0"					\
 	"watchdog=0\0"						\
 	"usb_dr_mode=host\0"					\
 	"sensor_cnt=2\0"					\
 	""

 #define CONFIG_FPGA_COUNT	1
 #define CONFIG_FPGA		CONFIG_SYS_ALTERA_CYCLON2
 #define CONFIG_FPGA_ALTERA
 #define CONFIG_FPGA_CYCLON2

 #endif
	/*
	* Copyright (C) Matrix Vision GmbH 2008
	*
	* Matrix Vision mvBlueLYNX-M7 configuration file
	* based on Freescale's MPC8349ITX.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/


	#ifndef __CONFIG_H
	#define __CONFIG_H

	#include <version.h>

	/*
	* High Level Configuration Options
	*/
	#define CONFIG_E300 1
	#define CONFIG_MPC83XX 1
	#define CONFIG_MPC834X 1
	#define CONFIG_MPC8343 1

	#define CONFIG_SYS_IMMR 0xE0000000

	#define CONFIG_PCI
	#define CONFIG_83XX_GENERIC_PCI
	#define CONFIG_PCI_SKIP_HOST_BRIDGE
	#define CONFIG_HARD_I2C
	#define CONFIG_TSEC_ENET
	#define CONFIG_MPC8XXX_SPI
	#define CONFIG_HARD_SPI
	#define MVBLM7_MMC_CS 0x04000000

	/* I2C */
	#undef CONFIG_SOFT_I2C

	#define CONFIG_FSL_I2C
	#define CONFIG_I2C_MULTI_BUS
	#define CONFIG_SYS_I2C_OFFSET 0x3000
	#define CONFIG_SYS_I2C2_OFFSET 0x3100

	#define CONFIG_SYS_I2C_SPEED 100000
	#define CONFIG_SYS_I2C_SLAVE 0x7F

	/*
	* DDR Setup
	*/
	#define CONFIG_SYS_DDR_BASE 0x00000000
	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
	#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE
	#define CONFIG_SYS_83XX_DDR_USES_CS0 1
	#define CONFIG_SYS_MEMTEST_START (60<<20)
	#define CONFIG_SYS_MEMTEST_END (70<<20)

	#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN \| \
	DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05

	#define CONFIG_SYS_DDR_SIZE 256

	/* HC, 75Ohm, DDR-II, DRQ */
	#define CONFIG_SYS_DDRCDR 0x80000001
	/* EN, ODT_WR, 3BA, 14row, 10col */
	#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014102
	#define CONFIG_SYS_DDR_CS1_CONFIG 0x0
	#define CONFIG_SYS_DDR_CS2_CONFIG 0x0
	#define CONFIG_SYS_DDR_CS3_CONFIG 0x0

	#define CONFIG_SYS_DDR_CS0_BNDS 0x0000000f
	#define CONFIG_SYS_DDR_CS1_BNDS 0x0
	#define CONFIG_SYS_DDR_CS2_BNDS 0x0
	#define CONFIG_SYS_DDR_CS3_BNDS 0x0

	#define CONFIG_SYS_DDR_CLK_CNTL 0x02000000

	#define CONFIG_SYS_DDR_TIMING_0 0x00260802
	#define CONFIG_SYS_DDR_TIMING_1 0x2625b221
	#define CONFIG_SYS_DDR_TIMING_2 0x1f9820c7
	#define CONFIG_SYS_DDR_TIMING_3 0x00000000

	/* ~MEM_EN, SREN, DDR-II, 32_BE */
	#define CONFIG_SYS_DDR_SDRAM_CFG 0x43080000
	#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000
	#define CONFIG_SYS_DDR_INTERVAL 0x04060100

	#define CONFIG_SYS_DDR_MODE 0x078e0232

	/* Flash */
	#define CONFIG_SYS_FLASH_CFI
	#define CONFIG_FLASH_CFI_DRIVER
	#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT

	#define CONFIG_SYS_FLASH_BASE 0xFF800000
	#define CONFIG_SYS_FLASH_SIZE 8
	#define CONFIG_SYS_FLASH_SIZE_SHIFT 3
	#define CONFIG_SYS_FLASH_EMPTY_INFO
	#define CONFIG_SYS_FLASH_ERASE_TOUT 60000
	#define CONFIG_SYS_FLASH_WRITE_TOUT 500
	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	#define CONFIG_SYS_MAX_FLASH_SECT 256

	#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \| BR_PS_16 \| BR_V)
	#define CONFIG_SYS_OR0_PRELIM ((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \| OR_UPM_XAM \| \
	OR_GPCM_CSNT \| OR_GPCM_ACS_DIV2 \| OR_GPCM_XACS\|\
	OR_GPCM_SCY_15 \| OR_GPCM_TRLX \| OR_GPCM_EHTR \| \
	OR_GPCM_EAD)
	#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
	#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN \| (0x13 + CONFIG_SYS_FLASH_SIZE_SHIFT))

	/*
	* U-Boot memory configuration
	*/
	#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
	#undef CONFIG_SYS_RAMBOOT

	#define CONFIG_SYS_INIT_RAM_LOCK
	#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */
	#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM*/

	#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */
	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET

	/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
	#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
	#define CONFIG_SYS_MALLOC_LEN (512 * 1024)

	/*
	* Local Bus LCRR and LBCR regs
	* LCRR: DLL bypass, Clock divider is 4
	* External Local Bus rate is
	* CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
	*/
	#define CONFIG_SYS_LCRR (LCRR_DBYP \| LCRR_CLKDIV_4)
	#define CONFIG_SYS_LBC_LBCR 0x00000000

	/* LB sdram refresh timer, about 6us */
	#define CONFIG_SYS_LBC_LSRT 0x32000000
	/* LB refresh timer prescal, 266MHz/32*/
	#define CONFIG_SYS_LBC_MRTPR 0x20000000

	/*
	* Serial Port
	*/
	#define CONFIG_CONS_INDEX 1
	#undef CONFIG_SERIAL_SOFTWARE_FIFO
	#define CONFIG_SYS_NS16550
	#define CONFIG_SYS_NS16550_SERIAL
	#define CONFIG_SYS_NS16550_REG_SIZE 1
	#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)

	#define CONFIG_SYS_BAUDRATE_TABLE \
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}

	#define CONFIG_CONSOLE ttyS0
	#define CONFIG_BAUDRATE 115200

	#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500)
	#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600)

	/* pass open firmware flat tree */
	#define CONFIG_OF_LIBFDT 1
	#define CONFIG_OF_BOARD_SETUP 1
	#define CONFIG_OF_STDOUT_VIA_ALIAS 1
	#define MV_DTB_NAME "mvblm7.dtb"

	/*
	* PCI
	*/
	#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
	#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
	#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000
	#define CONFIG_SYS_PCI1_MMIO_BASE (CONFIG_SYS_PCI1_MEM_BASE + CONFIG_SYS_PCI1_MEM_SIZE)
	#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE
	#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000
	#define CONFIG_SYS_PCI1_IO_BASE 0x00000000
	#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000
	#define CONFIG_SYS_PCI1_IO_SIZE 0x01000000

	#define _IO_BASE 0x00000000

	#define CONFIG_NET_MULTI 1
	#define CONFIG_NET_RETRY_COUNT 3

	#define PCI_66M
	#define CONFIG_83XX_CLKIN 66666667
	#define CONFIG_PCI_PNP
	#define CONFIG_PCI_SCAN_SHOW

	/* TSEC */
	#define CONFIG_GMII
	#define CONFIG_SYS_VSC8601_SKEWFIX
	#define CONFIG_SYS_VSC8601_SKEW_TX 3
	#define CONFIG_SYS_VSC8601_SKEW_RX 3

	#define CONFIG_TSEC1
	#define CONFIG_TSEC2

	#define CONFIG_HAS_ETH0
	#define CONFIG_TSEC1_NAME "TSEC0"
	#define CONFIG_FEC1_PHY_NORXERR
	#define CONFIG_SYS_TSEC1_OFFSET 0x24000
	#define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
	#define TSEC1_PHY_ADDR 0x10
	#define TSEC1_PHYIDX 0
	#define TSEC1_FLAGS (TSEC_GIGABIT\|TSEC_REDUCED)

	#define CONFIG_HAS_ETH1
	#define CONFIG_TSEC2_NAME "TSEC1"
	#define CONFIG_FEC2_PHY_NORXERR
	#define CONFIG_SYS_TSEC2_OFFSET 0x25000
	#define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
	#define TSEC2_PHY_ADDR 0x11
	#define TSEC2_PHYIDX 0
	#define TSEC2_FLAGS (TSEC_GIGABIT\|TSEC_REDUCED)

	#define CONFIG_ETHPRIME "TSEC0"

	#define CONFIG_BOOTP_VENDOREX
	#define CONFIG_BOOTP_SUBNETMASK
	#define CONFIG_BOOTP_GATEWAY
	#define CONFIG_BOOTP_DNS
	#define CONFIG_BOOTP_DNS2
	#define CONFIG_BOOTP_HOSTNAME
	#define CONFIG_BOOTP_BOOTFILESIZE
	#define CONFIG_BOOTP_BOOTPATH
	#define CONFIG_BOOTP_NTPSERVER
	#define CONFIG_BOOTP_RANDOM_DELAY
	#define CONFIG_BOOTP_SEND_HOSTNAME

	/* USB */
	#define CONFIG_HAS_FSL_DR_USB

	/*
	* Environment
	*/
	#undef CONFIG_SYS_FLASH_PROTECTION
	#define CONFIG_ENV_OVERWRITE

	#define CONFIG_ENV_IS_IN_FLASH 1
	#define CONFIG_ENV_ADDR 0xFF800000
	#define CONFIG_ENV_SIZE 0x2000
	#define CONFIG_ENV_SECT_SIZE 0x2000
	#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR+CONFIG_ENV_SIZE)
	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE

	#define CONFIG_LOADS_ECHO
	#define CONFIG_SYS_LOADS_BAUD_CHANGE

	/*
	* Command line configuration.
	*/
	#include <config_cmd_default.h>

	#define CONFIG_CMD_CACHE
	#define CONFIG_CMD_IRQ
	#define CONFIG_CMD_NET
	#define CONFIG_CMD_MII
	#define CONFIG_CMD_PING
	#define CONFIG_CMD_DHCP
	#define CONFIG_CMD_SDRAM
	#define CONFIG_CMD_PCI
	#define CONFIG_CMD_I2C
	#define CONFIG_CMD_FPGA

	#undef CONFIG_WATCHDOG

	/*
	* Miscellaneous configurable options
	*/
	#define CONFIG_SYS_LONGHELP
	#define CONFIG_CMDLINE_EDITING
	#define CONFIG_SYS_HUSH_PARSER
	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "

	/* default load address */
	#define CONFIG_SYS_LOAD_ADDR 0x2000000
	/* default location for tftp and bootm */
	#define CONFIG_LOADADDR 0x200000

	#define CONFIG_SYS_PROMPT "mvBL-M7> "
	#define CONFIG_SYS_CBSIZE 256

	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	#define CONFIG_SYS_MAXARGS 16
	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	#define CONFIG_SYS_HZ 1000

	/*
	* For booting Linux, the board info and command line data
	* have to be in the first 8 MB of memory, since this is
	* the maximum mapped by the Linux kernel during initialization.
	*/
	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/

	#define CONFIG_SYS_HRCW_LOW 0x0
	#define CONFIG_SYS_HRCW_HIGH 0x0

	/*
	* System performance
	*/
	#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */
	#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */
	#define CONFIG_SYS_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */
	#define CONFIG_SYS_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */

	/* clocking */
	#define CONFIG_SYS_SCCR_ENCCM 0
	#define CONFIG_SYS_SCCR_USBMPHCM 0
	#define CONFIG_SYS_SCCR_USBDRCM 2
	#define CONFIG_SYS_SCCR_TSEC1CM 1
	#define CONFIG_SYS_SCCR_TSEC2CM 1

	#define CONFIG_SYS_SICRH 0x1fff8003
	#define CONFIG_SYS_SICRL (SICRL_LDP_A \| SICRL_USB1 \| SICRL_USB0)

	#define CONFIG_SYS_HID0_INIT 0x000000000
	#define CONFIG_SYS_HID0_FINAL CONFIG_SYS_HID0_INIT

	#define CONFIG_SYS_HID2 HID2_HBE
	#define CONFIG_HIGH_BATS 1

	/* DDR */
	#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \| BATL_PP_10 \| BATL_MEMCOHERENCE)
	#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \| BATU_BL_256M \| BATU_VS \| BATU_VP)

	/* PCI */
	#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE \| BATL_PP_10 \| BATL_MEMCOHERENCE)
	#define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE \| BATU_BL_256M \| BATU_VS \| BATU_VP)
	#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE \| BATL_PP_10 \| BATL_CACHEINHIBIT \|\
	BATL_GUARDEDSTORAGE)
	#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE \| BATU_BL_256M \| BATU_VS \| BATU_VP)

	/* no PCI2 */
	#define CONFIG_SYS_IBAT3L 0
	#define CONFIG_SYS_IBAT3U 0
	#define CONFIG_SYS_IBAT4L 0
	#define CONFIG_SYS_IBAT4U 0

	/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
	#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \| BATL_PP_10 \| BATL_CACHEINHIBIT \| \
	BATL_GUARDEDSTORAGE)
	#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \| BATU_BL_256M \| BATU_VS \| BATU_VP)

	/* stack in DCACHE 0xFDF00000 & FLASH @ 0xFF800000 */
	#define CONFIG_SYS_IBAT6L (0xF0000000 \| BATL_PP_10 \| BATL_MEMCOHERENCE \| \
	BATL_GUARDEDSTORAGE)
	#define CONFIG_SYS_IBAT6U (0xF0000000 \| BATU_BL_256M \| BATU_VS \| BATU_VP)
	#define CONFIG_SYS_IBAT7L 0
	#define CONFIG_SYS_IBAT7U 0

	#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
	#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
	#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
	#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
	#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
	#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
	#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
	#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
	#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L
	#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
	#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
	#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
	#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L
	#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
	#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L
	#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U

	/*
	* Internal Definitions
	*
	* Boot Flags
	*/
	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	#define BOOTFLAG_WARM 0x02 /* Software reboot */


	/*
	* Environment Configuration
	*/
	#define CONFIG_ENV_OVERWRITE

	#define CONFIG_NETDEV eth0

	/* Default path and filenames */
	#define CONFIG_BOOTDELAY 5
	#define CONFIG_AUTOBOOT_KEYED
	#define CONFIG_AUTOBOOT_STOP_STR "s"
	#define CONFIG_ZERO_BOOTDELAY_CHECK
	#define CONFIG_RESET_TO_RETRY 1000

	#define MV_CI mvBL-M7
	#define MV_VCI mvBL-M7
	#define MV_FPGA_DATA 0xfff80000
	#define MV_FPGA_SIZE 0x00076ca2
	#define MV_KERNEL_ADDR 0xff810000
	#define MV_INITRD_ADDR 0xffb00000
	#define MV_SOURCE_ADDR 0xff804000
	#define MV_SOURCE_ADDR2 0xff806000
	#define MV_DTB_ADDR 0xff808000
	#define MV_INITRD_LENGTH 0x00400000

	#define CONFIG_SHOW_BOOT_PROGRESS 1

	#define MV_KERNEL_ADDR_RAM 0x00100000
	#define MV_DTB_ADDR_RAM 0x00600000
	#define MV_INITRD_ADDR_RAM 0x01000000

	#define CONFIG_BOOTCOMMAND "if imi ${autoscr_addr}; \
	then source ${autoscr_addr}; \
	else source ${autoscr_addr2}; \
	fi;"
	#define CONFIG_BOOTARGS "root=/dev/ram ro rootfstype=squashfs"

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"console_nr=0\0" \
	"baudrate=" MK_STR(CONFIG_BAUDRATE) "\0" \
	"stdin=serial\0" \
	"stdout=serial\0" \
	"stderr=serial\0" \
	"fpga=0\0" \
	"fpgadata=" MK_STR(MV_FPGA_DATA) "\0" \
	"fpgadatasize=" MK_STR(MV_FPGA_SIZE) "\0" \
	"autoscr_addr=" MK_STR(MV_SOURCE_ADDR) "\0" \
	"autoscr_addr2=" MK_STR(MV_SOURCE_ADDR2) "\0" \
	"mv_kernel_addr=" MK_STR(MV_KERNEL_ADDR) "\0" \
	"mv_kernel_addr_ram=" MK_STR(MV_KERNEL_ADDR_RAM) "\0" \
	"mv_initrd_addr=" MK_STR(MV_INITRD_ADDR) "\0" \
	"mv_initrd_addr_ram=" MK_STR(MV_INITRD_ADDR_RAM) "\0" \
	"mv_initrd_length=" MK_STR(MV_INITRD_LENGTH) "\0" \
	"mv_dtb_addr=" MK_STR(MV_DTB_ADDR) "\0" \
	"mv_dtb_addr_ram=" MK_STR(MV_DTB_ADDR_RAM) "\0" \
	"dtb_name=" MK_STR(MV_DTB_NAME) "\0" \
	"mv_version=" U_BOOT_VERSION "\0" \
	"dhcp_client_id=" MK_STR(MV_CI) "\0" \
	"dhcp_vendor-class-identifier=" MK_STR(MV_VCI) "\0" \
	"netretry=no\0" \
	"use_static_ipaddr=no\0" \
	"static_ipaddr=192.168.90.10\0" \
	"static_netmask=255.255.255.0\0" \
	"static_gateway=0.0.0.0\0" \
	"initrd_name=uInitrd.mvblm7-xenorfs\0" \
	"zcip=no\0" \
	"netboot=yes\0" \
	"mvtest=Ff\0" \
	"tried_bootfromflash=no\0" \
	"tried_bootfromnet=no\0" \
	"bootfile=mvblm72625.boot\0" \
	"use_dhcp=yes\0" \
	"gev_start=yes\0" \
	"mvbcdma_debug=0\0" \
	"mvbcia_debug=0\0" \
	"propdev_debug=0\0" \
	"gevss_debug=0\0" \
	"watchdog=0\0" \
	"usb_dr_mode=host\0" \
	"sensor_cnt=2\0" \
	""

	#define CONFIG_FPGA_COUNT 1
	#define CONFIG_FPGA CONFIG_SYS_ALTERA_CYCLON2
	#define CONFIG_FPGA_ALTERA
	#define CONFIG_FPGA_CYCLON2

	#endif